Force Sensors(6640)

Part	Manufacturer	Description		Stock	Action
815-SN74HC139NSR	Ultralife	SN74HC139NSR Overview This is a relatively small item of digital switch that is included in the 16-SOIC (0.209, 5.30mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.The multiplexers from 74HC series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number 74HC139 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.This supply type employs Single.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.There are 4 bits in signal multiplexer.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.There are 4 outputs designed for the operation of the turn signal switch.The digital switch ic is an electronic part classified into Decoder/Drivers.It consumes 80μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches is packaged according to the way of TR.In the mux switch configuration, there are 2 elements. SN74HC139NSR Features Supplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74HC139NSR Applications There are a lot of Texas Instruments SN74HC139NSR Signal Switches / Multiplexers / Decoders applications. Signal router Enabling different rows of memory depending on address in memory chips Metal detectors Data bus control A robotic vehicle with the metal detector Time division multiplexing system Injectors Data collection system LVDS Memory chips	PDF	999 In-stock	Get Quote
815-CD74HC238M96	Ultralife	<h3>CD74HC238M96 Overview</h3><div><br/>Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number of 74HC238 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 4.5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.This multiplexer ic is configured with 16 pins.The mounting point is Surface Mount.The logic switch is a member of the family of HC/UH.There are 8 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.The turn signal switch has 8 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.It consumes 8μA current of multiplexer ic since it is not affected by external factors.It is provided with 6 inputs.The  signal switching is packaged by TR. It is possible to accept voltage levels through 3 input lines of multiplexers.The digitalswitch relies on 1 circuits to function normally.<br/><br/></div><h3>CD74HC238M96 Features</h3><div><br/>Supplied in the 16-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Single<br/>3 input lines<br/><br/></div><h3>CD74HC238M96 Applications</h3><div><br/>There are a lot of Texas Instruments CD74HC238M96 Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Data transfer<!--<li--></li><li>Communication system<!--<li--></li><li>Control unit of Central Processing unit (CPU)<!--<li--></li><li>Data communication<!--<li--></li><li>Signal router<!--<li--></li><li>HDMI applications<!--<li--></li><li>Logic gates for other digital devices<!--<li--></li><li>Recording transmission<!--<li--></li><li>To select different task for memory in microprocessor memory systems<!--<li--></li><li>Relay<!--<li--></li></ul>	PDF	999 In-stock	Get Quote
815-CD4016BM96	Ultralife	CD4016BM96 Overview Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Bilateral, FET Switches as the analog IC.The operating temperature of -55°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 4000B series.As part of its basic configuration, 14 terminations are designed as a part of it.To find signal switch's related components, a base part number of CD4016 may also be used.The turn signal switch is supplied with a voltage of 10V volts.This turn signal switch has 14 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Dual, Single is employed as the supply type.It is configured with 14 pins.It is positioned in the direction of Surface Mount.There are 1 bits signal multiplexer provides.In order for the turn signal switch to work, there are 1 outputs.In electronic terms, the digital switch ic is classified as Multiplexer or Switches.A resistance of 400Ohm is used to operate it.In the turn signal switch's circuit, there are 4 channels used for transmission.During normal operation, the digitalswitch consists of 4 circuits. CD4016BM96 Features Supplied in the 14-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Dual, Single CD4016BM96 Applications There are a lot of Texas Instruments CD4016BM96 Signal Switches / Multiplexers / Decoders applications. Transmission from the computer system of a satellite Data transfer Control unit of Central Processing unit (CPU) Video transmission Combinational circuit A/D converters Data bus control LVDS Automation system Speed control of medern motors	PDF	999 In-stock	Get Quote
815-CD4556BM96	Ultralife	CD4556BM96 Overview In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.As its base part number is CD4556, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.As a type of supply, Dual is employed.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.In the signal multiplexer, there are 4 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.As a result, the turn signal switch consists of 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.No external influence consumes 100μA current of multiplexer ic.TR is used to package the switches.In order to accept voltage levels, the multiplexers have input lines 1 on the board.In the mux switch configuration, there are 2 elements. CD4556BM96 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Dual 1 input lines CD4556BM96 Applications There are a lot of Texas Instruments CD4556BM96 Signal Switches / Multiplexers / Decoders applications. Code converters Used to connect a single source to multiple destinations Make half adder Injectors Seven segment displays Data collection system Image transmission Communication system Memory system of computers Textile mills	PDF	999 In-stock	Get Quote
815-SN74LVC2G157DCTR	Ultralife	<h3>SN74LVC2G157DCTR Overview</h3><div><br/>In order to conserve board space, digital switch is included in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width).Cut Tape (CT) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 1.65V~5.5V, designers have superior flexibility.Several applications are possible for 74LVC series multiplexers.The basic configuration includes 8 terminations.You can also find related parts by using its logic switch base part number of 74LVC2G157.The multiplexer's system works with 1.8V voltage.In this turn signal switch, there are 8 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.A configuration of 8 pins is used.It is mounted in the way of Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.As a result, signal multiplexer provides 2 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, there is a power supply provided at 3.3V.This turn signal switch has 1 outputs designed for its operation.A multiplexer such as this has 2 inputs available.The switches package is packaged in accordance with TR.During normal operation, the digitalswitch consists of 1 circuits.<br/><br/></div><h3>SN74LVC2G157DCTR Features</h3><div><br/>Supplied in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package<br/>Adopting a supply type of Single<br/>Power supplies of 3.3V<br/><br/></div><h3>SN74LVC2G157DCTR Applications</h3><div><br/>There are a lot of Texas Instruments SN74LVC2G157DCTR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Relay<!--<li--></li><li>Electronic circuits<!--<li--></li><li>Memory chips<!--<li--></li><li>Analog to digital conversion<!--<li--></li><li>Communication system<!--<li--></li><li>A robotic vehicle with the metal detector<!--<li--></li><li>Paper plants<!--<li--></li><li>PCIe<!--<li--></li><li>Control unit of Central Processing unit (CPU)<!--<li--></li><li>Data bus control<!--<li--></li></ul>	PDF	999 In-stock	Get Quote
815-SN74HC253DR	Ultralife	SN74HC253DR Overview Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.Among its basic features are 16 terminations.In addition, it also has a base part number of 74HC253, which can be used to find related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.The mounting point is Surface Mount.The logic switch is included into the family of HC.Signal multiplexer contains 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.The turn signal switch has 1 outputs designed for operation.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The multiplexer is equipped with 8 inputs.The switches is packaged according to the way of TR.The turn signal switch's circuit consists of 2 transmission channels. SN74HC253DR Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74HC253DR Applications There are a lot of Texas Instruments SN74HC253DR Signal Switches / Multiplexers / Decoders applications. Data transfer Decimal decoder Recording transmission LVDS PCIe Seven segment displays Electronic circuits Automation system War field flying robot with a night vision flying camera Control unit of Central Processing unit (CPU)	PDF	999 In-stock	Get Quote
815-SN74LVC138AQPWRQ1	Ultralife	SN74LVC138AQPWRQ1 Overview Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~3.6V, designers are provided with a greater degree of flexibility.In addition to being a member of the Automotive, AEC-Q100, 74LVC series, these multiplexers have a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.As its base part number is 74LVC138, logic switch can also be used to find its related parts.The multiplexer is supplied with 2.7V voltage.Signal switch has 16 component pins.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.In this signal multiplexer, there are 8 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).There are 8 outputs designed to operate the turn signal switch.It consumes 10μA current of multiplexer ic without external influences.In this multiplexer, there is a total of 3 inputs.The signal switching is packaged by TR. The configuration of the mux switch contains 1 elements. SN74LVC138AQPWRQ1 Features Supplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74LVC138AQPWRQ1 Applications There are a lot of Texas Instruments SN74LVC138AQPWRQ1 Signal Switches / Multiplexers / Decoders applications. Speed control of medern motors Encrypted communications system Control unit of Central Processing unit (CPU) Audio transmission Communication system Video transmission Arithmetic Logic Units Recording transmission Code converters Data transfer	PDF	999 In-stock	Get Quote
815-SN74LVC257APWR	Ultralife	SN74LVC257APWR Overview This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.65V~3.6V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74LVC series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74LVC257, so you can find its logic switch related parts using that number.The multiplexer's system works with 3.3V voltage.This turn signal switch consists of 16 component pins.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.In this signal multiplexer, there are 2 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.During mux switch's normal operation, 3.3V is provided with a power supply.There are 1 outputs designed to operate the turn signal switch.This multiplexer has a total of 8 inputs.In accordance with TR, switches can be packaged.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. SN74LVC257APWR Features Supplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC257APWR Applications There are a lot of Texas Instruments SN74LVC257APWR Signal Switches / Multiplexers / Decoders applications. Metal detectors High-performance memory-decoding applications Home automation system Memory chips RF-based home automation system Video transmission To select different devices in microprocessor input Signal router Microprocessor input/output systems Code converters	PDF	999 In-stock	Get Quote
815-CD74ACT138M96	Ultralife	CD74ACT138M96 Overview For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Decoder/Demultiplexer is used.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74ACT series.It is designed with 16 terminations as part of its basic configuration.The base part number is 74ACT138, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the ACT family, the logic switch is included.Signal multiplexer consists of 8 bits.There is a power supply provided for the mux switch's normal operation of 5V.The turn signal switch contains 8 outputs designed to operate.Decoder/Drivers is a category for the digital switch ics.Without external influences, it consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The multiplexer provides 3 inputs.The signal switching is packaged by TR. For the normal operation of the device, 1 circuits must be formed. CD74ACT138M96 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74ACT138M96 Applications There are a lot of Texas Instruments CD74ACT138M96 Signal Switches / Multiplexers / Decoders applications. HD surveillance system Microprocessor input/output systems Metal detectors Implementing boolean functions with multiple variables Encrypted communications system Data distribution Make half adder A robotic vehicle with the metal detector RF-based home automation system Logic circuits	PDF	999 In-stock	Get Quote
815-SN74CBT3345PWR	Ultralife	<h3>SN74CBT3345PWR Overview</h3><div><br/>For the purpose of saving board space, digital switch is included in the 20-TSSOP (0.173, 4.40mm Width).Cut Tape (CT) is the packaging method.The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CBT series can be used in a wide range of applications.It is designed with 20 terminations as part of its basic configuration.The base part number is 74CBT3345, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.The board is configured with 20 pins.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 8 bits.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches package is packaged in accordance with TR.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 7Ohm.64mA provides a high degree of switches' flexibility.<br/><br/></div><h3>SN74CBT3345PWR Features</h3><div><br/>Supplied in the 20-TSSOP (0.173, 4.40mm Width) package<br/>Adopting a supply type of Single<br/>Power supplies of 5V<br/>Operating with the supply voltage of 5V<br/><br/></div><h3>SN74CBT3345PWR Applications</h3><div><br/>There are a lot of Texas Instruments SN74CBT3345PWR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Seven segment displays<!--<li--></li><li>Time division multiplexing system <!--<li--></li><li>Medium scale TV wall<!--<li--></li><li>Speed synchronization of multiple motors in industries<!--<li--></li><li>Memory system of computers<!--<li--></li><li>Small scale TV wall<!--<li--></li><li>Frequency multiplexing system<!--<li--></li><li>War field flying robot with a night vision flying camera<!--<li--></li><li>Make half adder <!--<li--></li><li>Robotic vehicles<!--<li--></li></ul>	PDF	999 In-stock	Get Quote
815-SN74LVC138AQDRG4Q1	Ultralife	SN74LVC138AQDRG4Q1 Overview Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~3.6V supply voltage.The multiplexers from Automotive, AEC-Q100, 74LVC series can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74LVC138, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 2.7V.multiplexer's systemThis turn signal switch contains 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.The mounting is in the way of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.Signal multiplexer contains 8 bits.Vsup should be kept at 2V to prevent some unnecessary failures.As part of the operation of this turn signal switch, there are 8 outputs.Without external influences, it consumes 10μA current of multiplexer ic.This multiplexer provides 3 inputs.The switches package is packaged in a way which is consistent with TR.The mux switch configuration contains 1 elements. SN74LVC138AQDRG4Q1 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single SN74LVC138AQDRG4Q1 Applications There are a lot of Texas Instruments SN74LVC138AQDRG4Q1 Signal Switches / Multiplexers / Decoders applications. PCIe Code conversion Image transmission Data transfer LVDS Memory system of computers GLAN Seven segment displays D/A converters Automation system	PDF	999 In-stock	Get Quote
815-CD74HCT251M96	Ultralife	CD74HCT251M96 Overview As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers from 74HCT series can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.The part number for 74HCT251 can be used to find its logic switch related parts as well.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 16 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.Surface Mount is the way it is mounted.The logic switch object belongs to the family of HCT.In this signal multiplexer, there are 8 bits provided.mux switch's normal operation requires the power supply of 5V.For the turn signal switch's operation, there are 1 outputs.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.For the purpose of accepting voltage levels, the multiplexers have 2 input lines. CD74HCT251M96 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V 2 input lines CD74HCT251M96 Applications There are a lot of Texas Instruments CD74HCT251M96 Signal Switches / Multiplexers / Decoders applications. Memory chips Arithmetic Logic Units HD surveillance system Medium scale TV wall Data-routing applications Idle motor To select different devices in microprocessor output Telephone network Enabling different rows of memory depending on address in memory chips Night vision cameras	PDF	999 In-stock	Get Quote
815-SN74CBTD3384PWR	Ultralife	SN74CBTD3384PWR Overview In order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).Cut Tape (CT) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBTD series, which provide extensive application potential.The basic configuration of this system includes 24 terminations.There is a base part number 74CBTD3384 that can be used to locate signal switch's related components as well.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.With 24 pins, it is configured.Surface Mount is the way it is mounted.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides 5 bits.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.It is provided with 10 inputs.According to TR, the switches is packaged.The resistance is 2.As far as the resistance is concerned, it operates with 7Ohm.For higher switches' flexibility, 64mA is provided as an output current. SN74CBTD3384PWR Features Supplied in the 24-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3384PWR Applications There are a lot of Texas Instruments SN74CBTD3384PWR Signal Switches / Multiplexers / Decoders applications. RF-based home automation system Electronically controlled engine system Microprocessor memory systems PCIe War field flying robot with a night vision flying camera To select different devices in microprocessor input Data transfer Automatic Monitoring systems Data distribution Analog to digital conversion	PDF	999 In-stock	Get Quote
815-SN74HC251NSR	Ultralife	SN74HC251NSR Overview It is included in the 16-SOIC (0.209, 5.30mm Width) in order to save board space.The package is packaged in the manner of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Multiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74HC series are suitable for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.In addition, it also has a base part number of 74HC251, which can be used to find related parts.The multiplexer is supplied with 5V voltage.This turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.Single is used as its supply type.With 16 pins, it is configured.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.As a result, signal multiplexer provides a total of 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2/6V.The turn signal switch operates with 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 8 inputs and 8 outputs.In accordance with TR, switches can be packaged.A normal operation of the digitalswitch requires 1 circuits. SN74HC251NSR Features Supplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC251NSR Applications There are a lot of Texas Instruments SN74HC251NSR Signal Switches / Multiplexers / Decoders applications. Data communication Robotic vehicles Telephone network Speed control of medern motors Memory chips To select different devices in microprocessor input Night vision cameras Automatic Monitoring systems Home automation system Frequency multiplexing system	PDF	999 In-stock	Get Quote
815-SN74LV138ATDGVR	Ultralife	SN74LV138ATDGVR Overview In order to conserve board space, digital switch is included in the 16-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.In addition to being a member of the 74LV series, these multiplexers have a wide range of applications.Among its basic configurations are 16 terminations.The base part number is 74LV138, which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.There are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.In the signal multiplexer, there are 8 bits available.mux switch's normal operation requires the power supply of 5V.The turn signal switch contains 8 outputs designed to operate.This is a signal switch that is categorized as Decoder/Drivers.Not being affected by the external factors, consumes 2μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.There are 3 inputs provided in this multiplexer.According to TR, the switches is packaged.It is necessary for the digitalswitch to operate normally that 1 circuits be formed. SN74LV138ATDGVR Features Supplied in the 16-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LV138ATDGVR Applications There are a lot of Texas Instruments SN74LV138ATDGVR Signal Switches / Multiplexers / Decoders applications. Data demultiplexing Paper plants Steel plants To select different task for memory in microprocessor memory systems Microprocessor input/output systems Video transmission Signal router A/D converters Data bus control Control unit of Central Processing unit (CPU)	PDF	999 In-stock	Get Quote
815-SN74HC251DBR	Ultralife	SN74HC251DBR Overview This is a relatively small item of digital switch that is included in the 16-SSOP (0.209, 5.30mm Width) in order to save space on the board.Cut Tape (CT) is the packaging method.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Multiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Several applications are possible for 74HC series multiplexers.The basic configuration of this system includes 16 terminations.To find signal switch's related components, a base part number of 74HC251 may also be used.The multiplexer's system is powered by 5V volts.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.With 16 pins, it is configured.Surface Mount is the way it is mounted.The logic switch is a member of the HC/UH family.Signal multiplexer contains 8 bits.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.For mux switch's normal operation, power supply 2/6V is provided.This turn signal switch has 1 outputs designed for its operation.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.A TR packaging method is used in the switches.A normal operation of the digitalswitch requires 1 circuits. SN74HC251DBR Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC251DBR Applications There are a lot of Texas Instruments SN74HC251DBR Signal Switches / Multiplexers / Decoders applications. Night vision cameras To select different devices in microprocessor input A robotic vehicle with the metal detector PCIe GLAN Speed synchronization of multiple motors in industries Time division multiplexing system Video transmission Speed control of medern motors Small scale TV wall	PDF	999 In-stock	Get Quote
815-SN74HC139QPWRQ1	Ultralife	SN74HC139QPWRQ1 Overview Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Several applications are possible for Automotive, AEC-Q100, 74HC series multiplexers.Among its basic configurations are 16 terminations.The base part number is 74HC139, so you can find its logic switch related parts using that number.For multiplexer's system, 5V voltage is supplied.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HC/UH family.There are 4 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.As a result, the turn signal switch consists of 4 outputs.Without external influences, it consumes 8μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The switches packaging is based on TR.The digitalswitch relies on 2 circuits to function normally. SN74HC139QPWRQ1 Features Supplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74HC139QPWRQ1 Applications There are a lot of Texas Instruments SN74HC139QPWRQ1 Signal Switches / Multiplexers / Decoders applications. Idle motor CPU memory location identification Decimal decoder Speed synchronization of multiple motors in industries Paper plants To select different devices in microprocessor input LVDS Microprocessor instruction decoding Metal detectors Image transmission	PDF	999 In-stock	Get Quote
815-SN74CBT3245CDBQR	Ultralife	SN74CBT3245CDBQR Overview This is a relatively small item of digital switch that is included in the 20-SSOP (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration of this system includes 20 terminations.To find signal switch's related components, a base part number of 74CBT3245 may also be used.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.The board is configured with 20 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The signal switching is packaged by TR. 2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 12Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility. SN74CBT3245CDBQR Features Supplied in the 20-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3245CDBQR Applications There are a lot of Texas Instruments SN74CBT3245CDBQR Signal Switches / Multiplexers / Decoders applications. Transmission from the computer system of a satellite Data demultiplexing Relay Memory system of computers To select different task for memory in microprocessor memory systems CNC machines HDMI applications Data communication Communication system Image transmission	PDF	999 In-stock	Get Quote
815-CD74HC237PWR	Ultralife	CD74HC237PWR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 16-TSSOP (0.173, 4.40mm Width).Cut Tape (CT) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.With the 74HC series, the multiplexers are suitable for a diverse range of applications.This configuration includes 16 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74HC237 may also be used.The multiplexer's system is supplied with a voltage of 4.5V.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.The board is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of HC/UH.The multiplexer ic provides 8 bits.Keep Vsup at 2V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.This turn signal switch has 8 outputs designed for its operation.The part belongs to the Decoder/Drivers category of signal switches.In the absence of external influences, it consumes 8μA current of multiplexer ic.It has 3 inputs.In accordance with TR, switches can be packaged.The digitalswitch relies on 1 circuits to function normally. CD74HC237PWR Features Supplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2/6V CD74HC237PWR Applications There are a lot of Texas Instruments CD74HC237PWR Signal Switches / Multiplexers / Decoders applications. War field flying robot with a night vision flying camera Microprocessor memory systems Data communication Analog to digital conversion Analog, digital or video signal switching Decimal decoder Speed control of medern motors To select different devices in microprocessor input To select different task for memory in microprocessor memory systems LVDS	PDF	999 In-stock	Get Quote
815-SN74CBT3306DR	Ultralife	SN74CBT3306DR Overview In order to save board space, digital switch is located in the 8-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.This configuration includes 8 terminations as part of its basic functionality.In addition, it also has a base part number of 74CBT3306, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 8 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.The board is configured with 8 pins.The mount is in Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.There are 1 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 7Ohm.This turn signal switch's circuit is based on a circuit with 2 channels.Higher switches' flexibility is provided by providing 64mA as the output current. SN74CBT3306DR Features Supplied in the 8-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3306DR Applications There are a lot of Texas Instruments SN74CBT3306DR Signal Switches / Multiplexers / Decoders applications. Communication system GLAN CNC machines Electronically controlled engine system Automatic Monitoring systems Analog, digital or video signal switching Night vision cameras CPU memory location identification HDMI applications Speed control of medern motors	PDF	999 In-stock	Get Quote
815-SN74CBT3126DBR	Ultralife	SN74CBT3126DBR Overview It is included in the 14-SSOP (0.209, 5.30mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBT series can be used for a wide range of applications.The basic configuration includes 14 terminations.The base part number is 74CBT3126, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch has 14 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board is configured with 14 pins.The mount is in Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 4 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The switches is packaged according to the way of TR.2 is the resistance at which it operates.In terms of resistance, it has a value of 7Ohm.This turn signal switch's circuit uses 4 transmission channels.For higher switches' flexibility, 64mA is provided as an output current. SN74CBT3126DBR Features Supplied in the 14-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3126DBR Applications There are a lot of Texas Instruments SN74CBT3126DBR Signal Switches / Multiplexers / Decoders applications. GLAN Memory chips VGA Analog to digital conversion Solenoid cooling fan Data bus control Speed synchronization of multiple motors in industries HD surveillance system Injectors Robotic vehicles	PDF	999 In-stock	Get Quote
815-SN74CBT3125CDBQR	Ultralife	SN74CBT3125CDBQR Overview Due to the fact that it is provided in the 16-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Bus Switch as the analog IC.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number of 74CBT3125 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 16 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.A configuration of 16 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 4 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.The part belongs to the Bus Driver/Transceiver category of signal switches.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.The signal switching operates with a resistance of 2.With a resistance of 12Ohm, it operates.A total of 4 channels are used for transmission in the turn signal switch's circuit.For higher switches' flexibility, the output current is set to 64mA. SN74CBT3125CDBQR Features Supplied in the 16-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3125CDBQR Applications There are a lot of Texas Instruments SN74CBT3125CDBQR Signal Switches / Multiplexers / Decoders applications. Electronically controlled engine system To select different task for memory in microprocessor memory systems Decimal decoder Home automation system Medium scale TV wall Microprocessor instruction decoding Logic gates for other digital devices Data communication D/A converters A/D converters	PDF	999 In-stock	Get Quote
815-SN74CBT3253CRGYR	Ultralife	SN74CBT3253CRGYR Overview Due to the fact that it is provided in the 16-VFQFN Exposed Pad, digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74CBT series multiplexers.Its basic configuration includes terminations in the 16 range.The base part number is 74CBT3253, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 16 component pins.In this case, the supply type is Single.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer provides 8 bits.Vsup should be kept at 4V to prevent some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The turn signal switch has 2 outputs designed for operation.The digital switch ic is a part of an electronic system classified as Other Logic ICs.It consumes 3μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 12Ohm.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA. SN74CBT3253CRGYR Features Supplied in the 16-VFQFN Exposed Pad package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V Operating with the supply current of 3μA SN74CBT3253CRGYR Applications There are a lot of Texas Instruments SN74CBT3253CRGYR Signal Switches / Multiplexers / Decoders applications. PCIe Metal detectors Code conversion Arithmetic Logic Units Data bus control Data demultiplexing VGA CNC machines Robotic vehicles Analog to digital conversion	PDF	999 In-stock	Get Quote
815-SN74F151BDR	Ultralife	SN74F151BDR Overview Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74F series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 74F151, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.There are 16 pins on it.The mount is in Surface Mount.The logic switch is a member of the F/FAST family.In this signal multiplexer, there are 2 bits provided.mux switch's normal operation requires the power supply of 5V.The turn signal switch contains 1 outputs designed to operate.In the absence of external influences, it consumes 13.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.The switches package is packaged in accordance with TR.It is necessary for the digitalswitch to operate normally that 1 circuits be formed. SN74F151BDR Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74F151BDR Applications There are a lot of Texas Instruments SN74F151BDR Signal Switches / Multiplexers / Decoders applications. Data bus control Electronic circuits Medium scale TV wall Solenoid cooling fan Small scale TV wall PCIe To select different devices in microprocessor input Speed synchronization of multiple motors in industries GLAN Arithmetic Logic Units	PDF	999 In-stock	Get Quote
815-SN74CBT3126RGYR	Ultralife	SN74CBT3126RGYR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 14-VFQFN Exposed Pad.As a result, it is packaged in a way that is referred to as Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74CBT series are suitable for a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.Its logic switch base part number is 74CBT3126 which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.There are 14 component pins in this turn signal switch.In this case, Single is employed as the supply type.A configuration of 14 pins is used.This unit is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides 4 bits.Keeping Vsup at 4V will prevent some unwanted failures.It is provided that 5V has a power supply in order to function normally.Bus Driver/Transceivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches is packaged according to the way of TR.A resistance of 2 governs its operation.It operates with a resistance of 7Ohm.The turn signal switch's circuit consists of 4 transmission channels.The output current of 64mA is provided for higher switches' flexibility. SN74CBT3126RGYR Features Supplied in the 14-VFQFN Exposed Pad package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3126RGYR Applications There are a lot of Texas Instruments SN74CBT3126RGYR Signal Switches / Multiplexers / Decoders applications. Combinational circuit Time division multiplexing system Data communication To select different task for memory in microprocessor memory systems Arithmetic Logic Units Signal router Textile mills Microprocessor input/output systems LVDS Microprocessor instruction decoding	PDF	999 In-stock	Get Quote
815-SN74CBT3257CRGYR	Ultralife	SN74CBT3257CRGYR Overview In order to save board space, digital switch is located in the 16-VFQFN Exposed Pad.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Since they are members of the 74CBT series, they can be used in a wide variety of applications.Among its basic configurations are 16 terminations.In addition, it also has a base part number of 74CBT3257, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 16 component pins.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Keep Vsup at 4V to avoid unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.There are 2 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5.5V.TR is used to package the switches.A resistance of 12Ohm is used to operate the signal switching.4 circuits are formed for the normal operation of the digitalswitch.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA. SN74CBT3257CRGYR Features Supplied in the 16-VFQFN Exposed Pad package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5.5V Operating with the supply current of 3μA SN74CBT3257CRGYR Applications There are a lot of Texas Instruments SN74CBT3257CRGYR Signal Switches / Multiplexers / Decoders applications. War field flying robot with a night vision flying camera Speed control of medern motors Data-routing applications Implementing boolean functions with multiple variables Small scale TV wall High-performance memory-decoding applications Data communication Paper plants VGA Logic circuits	PDF	999 In-stock	Get Quote
815-SN74CBT3125CDBR	Ultralife	SN74CBT3125CDBR Overview As a means of saving space, digital switch is provided in the 14-SSOP (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.The basic configuration includes 14 terminations.The base part number is 74CBT3125, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.There are 14 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.There are 14 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer provides 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.There is a power supply provided for the mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.The resistance of the signal switching is 2.The resistance of the signal switching is 12Ohm.The turn signal switch's circuit has 4 transmission channels.There is an output current of 64mA that allows for greater switches' flexibility. SN74CBT3125CDBR Features Supplied in the 14-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3125CDBR Applications There are a lot of Texas Instruments SN74CBT3125CDBR Signal Switches / Multiplexers / Decoders applications. D/A converters Electronics industry Small scale TV wall Code conversion Control unit of Central Processing unit (CPU) A/D converters Automation system Enabling block of memory depending on address in memory chips Solenoid cooling fan Transmission from the computer system of a satellite	PDF	999 In-stock	Get Quote
815-SN74CBTD3384DBQR	Ultralife	SN74CBTD3384DBQR Overview Providing this information in the 24-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 24 terminations.The base part number is 74CBTD3384, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.The board is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer provides 10 bits.mux switch's normal operation requires the power supply of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.Supply voltages of 5V can provide reliable performance of the multiplexers.A TR packaging method is used in the switches.As far as the resistance is concerned, it operates with 2.A resistance of 7Ohm is used to operate it.The output current of 64mA is provided for higher switches' flexibility. SN74CBTD3384DBQR Features Supplied in the 24-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3384DBQR Applications There are a lot of Texas Instruments SN74CBTD3384DBQR Signal Switches / Multiplexers / Decoders applications. Control unit of Central Processing unit (CPU) Data transfer Small scale TV wall HD surveillance system Idle motor Arithmetic Logic Units Microprocessor instruction decoding Decimal decoder Data bus control High-performance memory-decoding applications	PDF	999 In-stock	Get Quote
815-SN74CBT3384ADWR	Ultralife	SN74CBT3384ADWR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).It is packaged according to the Cut Tape (CT) method.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.This configuration includes 24 terminations as part of its basic functionality.As its base part number is 74CBT3384, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V volts.This turn signal switch contains 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.This multiplexer ic has 24 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer contains 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.According to TR, the switches is packaged.2 is the resistance at which it operates.In terms of resistance, it has a value of 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current. SN74CBT3384ADWR Features Supplied in the 24-SOIC (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3384ADWR Applications There are a lot of Texas Instruments SN74CBT3384ADWR Signal Switches / Multiplexers / Decoders applications. Enabling block of memory depending on address in memory chips CPU memory location identification To select different devices in microprocessor input VGA Make full adder Data bus control HDMI applications Metal detectors Electronics industry Analog, digital or video signal switching	PDF	999 In-stock	Get Quote
815-SN74CBT3383CDBQR	Ultralife	SN74CBT3383CDBQR Overview Digital switch is provided in the 24-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus FET Exchange Switch is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.As its base part number is 74CBT3383, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 24 components that can be connected to each pin.A conductor terminates at GULL WING.There is a type of supply of Single.The board has 24 pins configured.Surface Mount is the way it is mounted.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 2 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.In the absence of external influences, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.It is provided with 10 inputs.In accordance with TR, switches can be packaged.A resistance of 4 is used to operate the signal switching.8Ohm is the resistance at which it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current. SN74CBT3383CDBQR Features Supplied in the 24-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3383CDBQR Applications There are a lot of Texas Instruments SN74CBT3383CDBQR Signal Switches / Multiplexers / Decoders applications. Signal router GLAN D/A converters Code converters Home automation system Microprocessor instruction decoding Arithmetic Logic Units Data communication Combinational circuit Computer memory	PDF	999 In-stock	Get Quote