English
My Cart
Total：0Sub-Total : $0.00
Checkout

Force Sensors(6640)

Image Part Manufacturer Description Stock Action
SN74CBT16214CDGGR
815-SN74CBT16214CDGGR
 Ultralife

SN74CBT16214CDGGR Overview


As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.The basic configuration includes 56 terminations.The part number for 74CBT16214 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.The board is configured with 56 pins.It is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides a total of 12 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.During mux switch's normal operation, 5V is provided with a power supply.For the turn signal switch's operation, there are 3 outputs.Other Logic ICs is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 36 inputs.Currently, the switches is packaged in accordance with the TR method.A resistance of 12Ohm is used to operate the signal switching.When 3μA is delivered to the load, stability of the multiplexers can be maintained.

SN74CBT16214CDGGR Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA

SN74CBT16214CDGGR Applications


There are a lot of Texas Instruments SN74CBT16214CDGGR Signal Switches / Multiplexers / Decoders applications.

  • To select different task for memory in microprocessor memory systems
  • Data communication
  • Automatic health monitoring systems
  • War field flying robot with a night vision flying camera
  • HD surveillance system
  • Night vision cameras
  • LVDS
  • Decimal decoder
  • Idle motor
  • Data demultiplexing
999
In-stock
 Get Quote
SN74CB3T3306DCUR
815-SN74CB3T3306DCUR
 Ultralife

SN74CB3T3306DCUR Overview


Due to the fact that it is provided in the 8-VFSOP (0.091, 2.30mm Width), digital switch allows the board to be compacted.Cut Tape (CT) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CB series can be used for a wide range of applications.It is designed with 8 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CB3T3306 may also be used.The multiplexer is supplied with 2.5V voltage.In this turn signal switch, there are 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.It is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CB3T/3VT family.In the signal multiplexer, there are 1 bits available.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.Without any external influences, it consumes 20μA current of multiplexer ic at all times.In accordance with TR, switches can be packaged.The resistance of the signal switching is 2.The system operates with a resistance of 8Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.In addition, ALSO OPERATES AT 3.3V SUPPLY exhibits improved characteristics.For greater switches' flexibility, the output current of 64mA is provided.

SN74CB3T3306DCUR Features


Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY

SN74CB3T3306DCUR Applications


There are a lot of Texas Instruments SN74CB3T3306DCUR Signal Switches / Multiplexers / Decoders applications.

  • VGA
  • Make half adder
  • Microprocessor memory systems
  • Seven segment displays
  • A robotic vehicle with the metal detector
  • Logic gates for other digital devices
  • Analog to digital conversion
  • A/D converters
  • Code converters
  • LVDS
999
In-stock
 Get Quote
SN74CBT16245CDLR
815-SN74CBT16245CDLR
 Ultralife

SN74CBT16245CDLR Overview


As a means of saving space, digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBT series, they can be used in a wide variety of applications.Among its basic configurations are 48 terminations.There is a base part number 74CBT16245 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 48 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.This multiplexer ic is configured with 48 pins.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 16 bits provided.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The switches package is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.A resistance of 12Ohm is used to operate the signal switching.For increased switches' flexibility, the output current of 64mA is provided.

SN74CBT16245CDLR Features


Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16245CDLR Applications


There are a lot of Texas Instruments SN74CBT16245CDLR Signal Switches / Multiplexers / Decoders applications.

  • Automatic Monitoring systems
  • Communication system
  • Data-routing applications
  • Automatic health monitoring systems
  • GLAN
  • CNC machines
  • Telephone network
  • HDMI applications
  • D/A converters
  • Paper plants
999
In-stock
 Get Quote
SN74CBT16245DGGR
815-SN74CBT16245DGGR
 Ultralife

SN74CBT16245DGGR Overview


Providing this information in the 48-TFSOP (0.240, 6.10mm Width) enables digital switch board space to be saved.The package is in the form of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74CBT series can be used in a wide range of applications.The basic configuration of this system includes 48 terminations.You can also find related parts by using its logic switch base part number of 74CBT16245.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 48 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.A configuration of 48 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 16 bits in signal multiplexer.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.In order to maintain mux switch's normal operation, power is provided to 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches is packaged according to the way of TR.As far as the resistance is concerned, it operates with 2.20Ohm is the resistance at which it operates.For higher switches' flexibility, 64mA is provided as an output current.

SN74CBT16245DGGR Features


Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16245DGGR Applications


There are a lot of Texas Instruments SN74CBT16245DGGR Signal Switches / Multiplexers / Decoders applications.

  • Recording transmission
  • HD surveillance system
  • Code conversion
  • A robotic vehicle with the metal detector
  • Medium scale TV wall
  • Transmission from the computer system of a satellite
  • Computer memory
  • Video transmission
  • Image transmission
  • Injectors
999
In-stock
 Get Quote
CY74FCT157CTQCT
815-CY74FCT157CTQCT
 Ultralife

CY74FCT157CTQCT Overview


In order to conserve board space, digital switch is included in the 16-SSOP (0.154, 3.90mm Width).The package is packaged in accordance with Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.75V~5.25V, designers are provided with a greater degree of flexibility.Several applications are possible for 74FCT series multiplexers.Among its basic configurations are 16 terminations.As its base part number is 74FCT157, logic switch can also be used to find its related parts.In this case, 5V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with 16 pins.It is positioned in the direction of Surface Mount.Among the family of FCT the logic switch is a member.Signal multiplexer provides 2 bits.The power supply of 5V is provided for mux switch's normal operation.For the turn signal switch's operation, there are 1 outputs.No external influence consumes 100μA current of multiplexer ic.It has 8 inputs.A TR packaging method is used in the switches.The turn signal switch's circuit has 4 transmission channels.

CY74FCT157CTQCT Features


Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V

CY74FCT157CTQCT Applications


There are a lot of Texas Instruments CY74FCT157CTQCT Signal Switches / Multiplexers / Decoders applications.

  • Used to connect a single source to multiple destinations
  • Code conversion
  • Idle motor
  • Arithmetic Logic Units
  • Analog to digital conversion
  • Transmission from the computer system of a satellite
  • Night vision cameras
  • Control unit of Central Processing unit (CPU)
  • To select different task for memory in microprocessor memory systems
  • Microprocessor instruction decoding
999
In-stock
 Get Quote
SN74CB3T3384DBQR
815-SN74CB3T3384DBQR
 Ultralife

SN74CB3T3384DBQR Overview


For the purpose of saving board space, digital switch is included in the 24-SSOP (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.Several applications are possible for 74CB series multiplexers.Among its basic features are 24 terminations.As its base part number is 74CB3T3384, logic switch can also be used to find its related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.A total of 24 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The CB3T/3VT family includes the logic switch.The multiplexer ic provides 20 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceiver.There are no external influences on this multiplexer ic, so it consumes 40μA current.The switches packaging is based on TR.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 8Ohm.The turn signal switch's circuit has 10 transmission channels.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.In order to provide greater switches' flexibility, 64mA is provided as the output current.

SN74CB3T3384DBQR Features


Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY

SN74CB3T3384DBQR Applications


There are a lot of Texas Instruments SN74CB3T3384DBQR Signal Switches / Multiplexers / Decoders applications.

  • Data demultiplexing
  • Medical industry
  • Control unit of Central Processing unit (CPU)
  • Automatic health monitoring systems
  • Metal detectors
  • Automation system
  • Textile mills
  • Signal router
  • Steel plants
  • Video transmission
999
In-stock
 Get Quote
SN74CBT16244DGVR
815-SN74CBT16244DGVR
 Ultralife

SN74CBT16244DGVR Overview


Due to the lack of space on the board, digital switch is provided in the 48-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There are 48 terminations included in its basic configuration.The base part number is 74CBT16244, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 48 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 16 bits that are provided.Keep Vsup at 4V to avoid unnecessary failures.In order for 5V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.A resistance of 7Ohm is used to operate it.For increased switches' flexibility, the output current of 64mA is provided.

SN74CBT16244DGVR Features


Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16244DGVR Applications


There are a lot of Texas Instruments SN74CBT16244DGVR Signal Switches / Multiplexers / Decoders applications.

  • Image transmission
  • Make full adder
  • Combinational circuit
  • Arithmetic Logic Units
  • CPU memory location identification
  • Enabling different rows of memory depending on address in memory chips
  • Recording transmission
  • Control unit of Central Processing unit (CPU)
  • Home automation system
  • Electronic circuits
999
In-stock
 Get Quote
SN74CB3T3253DBQR
815-SN74CB3T3253DBQR
 Ultralife

SN74CB3T3253DBQR Overview


This is a relatively small item of digital switch that is included in the 16-SSOP (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CB series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number 74CB3T3253 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 2.5V.Signal switch has 16 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.With 16 pins, it is configured.The mount is in Surface Mount.The logic switch is a member of the CB3T/3VT family.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.There are 4 outputs designed for the operation of the turn signal switch.Other Logic ICs is a category for the digital switch ics.It consumes 20μA current of multiplexer ic without external influences.The multiplexer provides 8 inputs.In accordance with TR, switches can be packaged.With a resistance of 8Ohm, it operates.As a result of the operation of the digitalswitch, 2 circuits are formed.

SN74CB3T3253DBQR Features


Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single

SN74CB3T3253DBQR Applications


There are a lot of Texas Instruments SN74CB3T3253DBQR Signal Switches / Multiplexers / Decoders applications.

  • Time division multiplexing system
  • GLAN
  • Solenoid cooling fan
  • Automation system
  • Recording transmission
  • Steel plants
  • To select different task for memory in microprocessor memory systems
  • Medical industry
  • Image transmission
  • Telephone network
999
In-stock
 Get Quote
SN74CBT3861DBQR
815-SN74CBT3861DBQR
 Ultralife

SN74CBT3861DBQR Overview


Digital switch is provided in the 24-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Multiplexers from the 74CBT series can be used in a wide range of applications.Among its basic features are 24 terminations.You can also find related parts by using its logic switch base part number of 74CBT3861.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.With 24 pins, it is configured.As you can see, it is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer contains 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with the TR method.The resistance is 2.A resistance of 7Ohm is used to operate the signal switching.For higher switches' flexibility, the output current is set to 64mA.

SN74CBT3861DBQR Features


Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT3861DBQR Applications


There are a lot of Texas Instruments SN74CBT3861DBQR Signal Switches / Multiplexers / Decoders applications.

  • Communication system
  • Audio transmission
  • To select different task for memory in microprocessor memory systems
  • Frequency multiplexing system
  • High-performance memory-decoding applications
  • Electronically controlled engine system
  • Medium scale TV wall
  • Logic gates for other digital devices
  • Textile mills
  • A robotic vehicle with the metal detector
999
In-stock
 Get Quote
SN74CBT3244DGVR
815-SN74CBT3244DGVR
 Ultralife

SN74CBT3244DGVR Overview


For the purpose of saving board space, digital switch is included in the 20-TFSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.It is designed with 20 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT3244.The multiplexer's system works with 5V voltage.Signal switch has 20 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with a 20 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.There are 8 bits in signal multiplexer.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 50μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches package is packaged in accordance with TR.The resistance of the signal switching is 2.As far as the resistance is concerned, it operates with 7Ohm.For increased switches' flexibility, the output current of 64mA is provided.

SN74CBT3244DGVR Features


Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT3244DGVR Applications


There are a lot of Texas Instruments SN74CBT3244DGVR Signal Switches / Multiplexers / Decoders applications.

  • RF-based home automation system
  • Computer memory
  • Encrypted communications system
  • PCIe
  • CNC machines
  • Memory system of computers
  • Night vision cameras
  • Logic gates for other digital devices
  • Steel plants
  • Enabling different rows of memory depending on address in memory chips
999
In-stock
 Get Quote
SN74CBT16233DGGR
815-SN74CBT16233DGGR
 Ultralife

SN74CBT16233DGGR Overview


Due to the fact that it is provided in the 56-TFSOP (0.240, 6.10mm Width), digital switch allows the board to be compacted.It is packaged in the way of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.75V~5.25V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 56 terminations as part of its basic configuration.Its logic switch base part number is 74CBT16233 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch contains 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 56 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 32 bits that are provided.A power supply is provided for mux switch's normal operation of 5V.The turn signal switch contains 2 outputs designed to operate.This is an the digital switch ic that is classified as Other Logic ICs.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.This signal switching operates at a resistance of 12Ohm.The turn signal switch's circuit has 16 transmission channels.In addition, BUS SWITCH provides improved characteristics.Providing the load with a supply voltage of 3μA can maintain stability of the multiplexers.

SN74CBT16233DGGR Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
Operating with the supply current of 3μA

SN74CBT16233DGGR Applications


There are a lot of Texas Instruments SN74CBT16233DGGR Signal Switches / Multiplexers / Decoders applications.

  • Control unit of Central Processing unit (CPU)
  • Medical industry
  • Audio transmission
  • Idle motor
  • Speed control of medern motors
  • Communication system
  • RF-based home automation system
  • Speed synchronization of multiple motors in industries
  • Home automation system
  • Analog, digital or video signal switching
999
In-stock
 Get Quote
TCA9548ARGERQ1
815-TCA9548ARGERQ1
 Ultralife

TCA9548ARGERQ1 Overview


It is included in the 24-VFQFN Exposed Pad in order to save board space.Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 1.65V~5.25V, designers have superior flexibility.Multiplexers from the Automotive, AEC-Q100 series can be used in a wide range of applications.Its basic configuration includes terminations in the 24 range.To find signal switch's related components, a base part number of CA9548 may also be used.NO LEAD represents the end of conductors.

TCA9548ARGERQ1 Features


Supplied in the 24-VFQFN Exposed Pad package

TCA9548ARGERQ1 Applications


There are a lot of Texas Instruments TCA9548ARGERQ1 Signal Switches / Multiplexers / Decoders applications.

  • To select different devices in microprocessor output
  • A robotic vehicle with the metal detector
  • Telephone network
  • Automatic health monitoring systems
  • Logic circuits
  • Frequency multiplexing system
  • Combinational circuit
  • HDMI applications
  • Image transmission
  • Implementing boolean functions with multiple variables
999
In-stock
 Get Quote
SN74CBT16209ADGGR
815-SN74CBT16209ADGGR
 Ultralife

SN74CBT16209ADGGR Overview


Due to the fact that it is provided in the 48-TFSOP (0.240, 6.10mm Width), digital switch allows the board to be compacted.Cut Tape (CT) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus FET Exchange Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration includes 48 terminations.To find signal switch's related components, a base part number of 74CBT16209 may also be used.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch contains 48 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.It is configured with 48 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 9 bits in signal multiplexer.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, power supply 5V is provided.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.In this multiplexer, there is a total of 18 inputs.The switches package is packaged in accordance with TR.The system operates with a resistance of 4.A resistance of 14Ohm is used to operate it.Additionally, it improves the characteristics of TTL COMPATIBLE BUS SWITCH.For greater switches' flexibility, the output current of 64mA is provided.

SN74CBT16209ADGGR Features


Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH

SN74CBT16209ADGGR Applications


There are a lot of Texas Instruments SN74CBT16209ADGGR Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor memory systems
  • CNC machines
  • High-performance memory-decoding applications
  • Speed control of medern motors
  • Combinational circuit
  • Computer memory
  • Enabling different functions units in microprocessor instruction decoding
  • Code conversion
  • Robotic vehicles
  • Frequency multiplexing system
999
In-stock
 Get Quote
SN74CBT16211ADGVR
815-SN74CBT16211ADGVR
 Ultralife

SN74CBT16211ADGVR Overview


Digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged in the way of Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBT series are suitable for a wide range of applications.There are 56 terminations included in its basic configuration.As its base part number is 74CBT16211, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 56 component pins in this turn signal switch.GULL WING represents the end of conductors.Single is used as its supply type.It is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 24 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.The power supply of 5V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without any external influences, it consumes 3μA current of multiplexer ic at all times.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 7Ohm.For greater switches' flexibility, the output current of 64mA is provided.

SN74CBT16211ADGVR Features


Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16211ADGVR Applications


There are a lot of Texas Instruments SN74CBT16211ADGVR Signal Switches / Multiplexers / Decoders applications.

  • HDMI applications
  • Enabling different functions units in microprocessor instruction decoding
  • Control unit of Central Processing unit (CPU)
  • Analog to digital conversion
  • Recording transmission
  • Video transmission
  • Make half adder
  • Medium scale TV wall
  • HD surveillance system
  • High-performance memory-decoding applications
999
In-stock
 Get Quote
SN74CBTLV3857DWR
815-SN74CBTLV3857DWR
 Ultralife

SN74CBTLV3857DWR Overview


It is included in the 24-SOIC (0.295, 7.50mm Width) in order to save board space.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~3.6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBTLV series, which provide extensive application potential.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74CBTLV3857, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 24 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.A total of 24 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.The multiplexer ic provides 10 bits.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The part belongs to the Bus Driver/Transceivers category of signal switches.Not being affected by the external factors, consumes 25mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.A TR packaging method is used in the switches.The signal switching operates with a resistance of 2.It operates with a resistance of 8Ohm.For higher switches' flexibility, the output current is set to 24mA.

SN74CBTLV3857DWR Features


Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V

SN74CBTLV3857DWR Applications


There are a lot of Texas Instruments SN74CBTLV3857DWR Signal Switches / Multiplexers / Decoders applications.

  • RF-based home automation system
  • Automation system
  • D/A converters
  • GLAN
  • Code conversion
  • Encrypted communications system
  • Microprocessor input/output systems
  • HD surveillance system
  • Electronically controlled engine system
  • Electronics industry
999
In-stock
 Get Quote
SN74CBT6800APWR
815-SN74CBT6800APWR
 Ultralife

SN74CBT6800APWR Overview


Due to the lack of space on the board, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.There is a base part number of 74CBT6800 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.This turn signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.This multiplexer ic has 24 pins configured.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 50μA current of multiplexer ic without external influences.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 7Ohm.For greater switches' flexibility, 64mA provides the output current.

SN74CBT6800APWR Features


Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT6800APWR Applications


There are a lot of Texas Instruments SN74CBT6800APWR Signal Switches / Multiplexers / Decoders applications.

  • Enabling block of memory depending on address in memory chips
  • Robotic vehicles
  • Control unit of Central Processing unit (CPU)
  • A/D converters
  • Electronically controlled engine system
  • Injectors
  • Encrypted communications system
  • Memory chips
  • Transmission from the computer system of a satellite
  • Speed synchronization of multiple motors in industries
999
In-stock
 Get Quote
SN74LVC157AQPWREP
815-SN74LVC157AQPWREP
 Ultralife
1465
In-stock
 Get Quote
SN74CBTLV16212GR
815-SN74CBTLV16212GR
 Ultralife

SN74CBTLV16212GR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 56-TFSOP (0.240, 6.10mm Width).The package is packaged in the manner of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus FET Exchange Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.There are 56 terminations included in its basic configuration.The base part number is 74CBTLV16212, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 2.5V voltage.This turn signal switch consists of 56 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 56 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.There are 24 bits in signal multiplexer.Keep Vsup at 2.3V to avoid unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 10μA current of multiplexer ic.It has 24 inputs.The signal switching is packaged by TR. 4 ports are used for some other peripheral signal switchings to plug in.A resistance of 27Ohm is used to operate the signal switching.It is possible to provide a current output of 64mA for greater switches' flexibility.

SN74CBTLV16212GR Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

SN74CBTLV16212GR Applications


There are a lot of Texas Instruments SN74CBTLV16212GR Signal Switches / Multiplexers / Decoders applications.

  • Idle motor
  • War field flying robot with a night vision flying camera
  • Transmission from the computer system of a satellite
  • Memory chips
  • Speed control of medern motors
  • Decimal decoder
  • PCIe
  • Automatic Monitoring systems
  • Injectors
  • Data communication
999
In-stock
 Get Quote
SN74CBTLV16210VR
815-SN74CBTLV16210VR
 Ultralife

SN74CBTLV16210VR Overview


Providing this information in the 48-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.The basic configuration includes 48 terminations.The base part number is 74CBTLV16210, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 2.5V volts.Currently, this turn signal switch has a total of 48 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic has 48 pins configured.Surface Mount is the way it is mounted.There is a family of CBTLV/3B members.As a result, signal multiplexer provides a total of 20 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.In the absence of external influences, it consumes 10μA current of multiplexer ic.The switches is packaged according to the way of TR.The system operates with a resistance of 2.With a resistance of 7Ohm, it operates.64mA provides a high degree of switches' flexibility.

SN74CBTLV16210VR Features


Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CBTLV16210VR Applications


There are a lot of Texas Instruments SN74CBTLV16210VR Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor input/output systems
  • Robotic vehicles
  • Microprocessor memory systems
  • Data collection system
  • Decimal decoder
  • Electronic circuits
  • To select different devices in microprocessor input
  • RF-based home automation system
  • Solenoid cooling fan
  • GLAN
999
In-stock
 Get Quote
SN74CBTLV16292GR
815-SN74CBTLV16292GR
 Ultralife

SN74CBTLV16292GR Overview


This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBTLV series can be used for a wide range of applications.Its basic configuration includes terminations in the 56 range.You can also find related parts by using its logic switch base part number of 74CBTLV16292.In this case, 2.5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 56 component pins.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 56 pin configuration.The mount is in Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In the signal multiplexer, there are 12 bits available.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.Normally, 2.5/3.3V is powered by a battery.The turn signal switch has 2 outputs designed for operation.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Without external influences, it consumes 10μA current of multiplexer ic.The multiplexer provides 24 inputs.TR is used to package the switches.As far as the resistance is concerned, it operates with 40Ohm.When the load is supplied with a voltage of 10μA, stability of the multiplexers can be maintained.

SN74CBTLV16292GR Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA

SN74CBTLV16292GR Applications


There are a lot of Texas Instruments SN74CBTLV16292GR Signal Switches / Multiplexers / Decoders applications.

  • Data-routing applications
  • Enabling different rows of memory depending on address in memory chips
  • RF-based home automation system
  • Memory chips
  • A/D converters
  • Data demultiplexing
  • War field flying robot with a night vision flying camera
  • Solenoid cooling fan
  • Microprocessor memory systems
  • Control unit of Central Processing unit (CPU)
999
In-stock
 Get Quote
74AC11138PWR
815-74AC11138PWR
 Ultralife

74AC11138PWR Overview


Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 3V~5.5V, designers have superior flexibility.Several applications are possible for 74AC series multiplexers.The base part number is 74AC11138, which is also useful when looking up signal switch's related components.This supply type employs Single.Currently, it is configured with 16 pins.The mounting is in the way of Surface Mount.Signal multiplexer consists of 8 bits.For the turn signal switch's operation, there are 8 outputs.Without the influence of external factors, it consumes 4μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.It has 3 inputs.The digitalswitch relies on 1 circuits to function normally.

74AC11138PWR Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

74AC11138PWR Applications


There are a lot of Texas Instruments 74AC11138PWR Signal Switches / Multiplexers / Decoders applications.

  • Audio transmission
  • Metal detectors
  • High-performance memory-decoding applications
  • Speed synchronization of multiple motors in industries
  • Transmission from the computer system of a satellite
  • PCIe
  • War field flying robot with a night vision flying camera
  • To select different devices in microprocessor output
  • Frequency multiplexing system
  • Analog, digital or video signal switching
999
In-stock
 Get Quote
SN74CB3Q16245DGVR
815-SN74CB3Q16245DGVR
 Ultralife

SN74CB3Q16245DGVR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.The multiplexers from 74CB series can be used for a wide range of applications.Among its basic features are 48 terminations.To find signal switch's related components, a base part number of 74CB3Q16245 may also be used.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch contains 48 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.With 48 pins, it is configured.It is mounted in the way of Surface Mount.In this signal multiplexer, there are 16 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 2mA current of multiplexer ic.The signal switching is packaged by TR. The resistance is 2.This signal switching operates at a resistance of 6Ohm.Additionally, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.

SN74CB3Q16245DGVR Features


Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES AT 3.3V SUPPLY

SN74CB3Q16245DGVR Applications


There are a lot of Texas Instruments SN74CB3Q16245DGVR Signal Switches / Multiplexers / Decoders applications.

  • Data collection system
  • Enabling different rows of memory depending on address in memory chips
  • Speed synchronization of multiple motors in industries
  • Electronic circuits
  • Enabling different functions units in microprocessor instruction decoding
  • Steel plants
  • Medical industry
  • Transmission from the computer system of a satellite
  • Enabling block of memory depending on address in memory chips
  • Injectors
999
In-stock
 Get Quote
SN74CBTLV16211DLR
815-SN74CBTLV16211DLR
 Ultralife

SN74CBTLV16211DLR Overview


For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).In this case, it is packaged as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sAs a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.This configuration includes 56 terminations as part of its basic functionality.The part number for 74CBTLV16211 can be used to find its logic switch related parts as well.In multiplexer's system, 2.5V is the voltage supplied.In this turn signal switch, there are 56 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.A total of 56 pins are configured on this board.The mount is in Surface Mount.The logic switch is a member of the CBTLV/3B family.There are 24 bits in signal multiplexer.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The signal switching is packaged by TR. The resistance is 2.A resistance of 4Ohm is used to operate it.Higher switches' flexibility is provided by providing 64mA as the output current.

SN74CBTLV16211DLR Features


Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single

SN74CBTLV16211DLR Applications


There are a lot of Texas Instruments SN74CBTLV16211DLR Signal Switches / Multiplexers / Decoders applications.

  • Computer memory
  • HDMI applications
  • Medical industry
  • Night vision cameras
  • Seven segment displays
  • Steel plants
  • Telephone network
  • Microprocessor memory systems
  • Image transmission
  • Data-routing applications
999
In-stock
 Get Quote
74AC11138N
815-74AC11138N
 Ultralife

74AC11138N Overview


Digital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.It is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Through Hole.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74AC series, which provide extensive application potential.There is a base part number 74AC11138 that can be used to locate signal switch's related components as well.This supply type employs Single.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Through Hole.As a result, signal multiplexer provides 8 bits.As a result, the turn signal switch consists of 8 outputs.It consumes 4μA current of multiplexer ic since it is not affected by external factors.Supply voltages of 5V can provide reliable performance of the multiplexers.A multiplexer such as this has 3 inputs available.In order for the digitalswitch to function normally, it has 1 circuits.

74AC11138N Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

74AC11138N Applications


There are a lot of Texas Instruments 74AC11138N Signal Switches / Multiplexers / Decoders applications.

  • Arithmetic Logic Units
  • To select different devices in microprocessor output
  • Code conversion
  • Speed control of medern motors
  • D/A converters
  • Automation system
  • Telephone network
  • Data-routing applications
  • Signal router
  • Data bus control
999
In-stock
 Get Quote
SN74CBTLV16211VR
815-SN74CBTLV16211VR
 Ultralife

SN74CBTLV16211VR Overview


This is a relatively small item of digital switch that is included in the 56-TFSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 56 terminations.To find signal switch's related components, a base part number of 74CBTLV16211 may also be used.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch has a total of 56 component pins.GULL WING represents the end of conductors.There is a type of supply of Single.Currently, it is configured with a 56 pin configuration.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.Signal multiplexer provides 24 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The part belongs to the Bus Driver/Transceivers category of signal switches.Without the influence of external factors, it consumes 10μA current of multiplexer ic.In accordance with TR, switches can be packaged.With a resistance of 0, it operates.The resistance of the signal switching is 4Ohm.For increased switches' flexibility, the output current of 64mA is provided.

SN74CBTLV16211VR Features


Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CBTLV16211VR Applications


There are a lot of Texas Instruments SN74CBTLV16211VR Signal Switches / Multiplexers / Decoders applications.

  • Enabling different functions units in microprocessor instruction decoding
  • Make full adder
  • Electronically controlled engine system
  • Home automation system
  • Data collection system
  • Electronic circuits
  • Implementing boolean functions with multiple variables
  • Video transmission
  • Computer memory
  • To select different devices in microprocessor output
999
In-stock
 Get Quote
SN74CB3Q16244DLR
815-SN74CB3Q16244DLR
 Ultralife

SN74CB3Q16244DLR Overview


As a means of saving space, digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Several applications are possible for 74CB series multiplexers.As part of its basic configuration, 48 terminations are designed as a part of it.There is a base part number of 74CB3Q16244 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 2.5V.There are 48 component pins in this turn signal switch.GULL WING represents the end of conductors.As a type of supply, Single is employed.The board is configured with 48 pins.This unit is mounted in the way of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.There are 16 bits in signal multiplexer.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.No external influence consumes 2mA current of multiplexer ic.The switches is packaged according to the way of TR.The resistance of the signal switching is 2.With a resistance of 10Ohm, it operates.It is possible to provide a current output of 30mA for greater switches' flexibility.

SN74CB3Q16244DLR Features


Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

SN74CB3Q16244DLR Applications


There are a lot of Texas Instruments SN74CB3Q16244DLR Signal Switches / Multiplexers / Decoders applications.

  • Solenoid cooling fan
  • Implementing boolean functions with multiple variables
  • Used to connect a single source to multiple destinations
  • Encrypted communications system
  • PCIe
  • Robotic vehicles
  • Video transmission
  • Logic gates for other digital devices
  • Electronic circuits
  • Microprocessor memory systems
999
In-stock
 Get Quote
74ACT11257DWR
815-74ACT11257DWR
 Ultralife

74ACT11257DWR Overview


In order to save board space, digital switch is located in the 20-SOIC (0.295, 7.50mm Width).The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Multiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Several applications are possible for 74ACT series multiplexers.As part of its basic configuration, 20 terminations are designed as a part of it.There is a base part number of 74ACT11257 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Dual employed as part of this supply.This multiplexer ic is configured with 20 pins.This unit is mounted in the way of Surface Mount.The logic switch object belongs to the family of ACT.Signal multiplexer provides 2 bits.Avoid unnecessary failures by keeping Vsup at 5.5V.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 1 outputs.This multiplexer has 8 inputs.In accordance with TR, switches can be packaged.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.In addition, it provides improved features of CENTER VCC/GND PINS.

74ACT11257DWR Features


Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of 5V
CENTER VCC/GND PINS

74ACT11257DWR Applications


There are a lot of Texas Instruments 74ACT11257DWR Signal Switches / Multiplexers / Decoders applications.

  • Signal router
  • Textile mills
  • D/A converters
  • Data bus control
  • Medium scale TV wall
  • Data-routing applications
  • Electronics industry
  • Enabling block of memory depending on address in memory chips
  • Enabling different functions units in microprocessor instruction decoding
  • Night vision cameras
999
In-stock
 Get Quote
SN74CBT16861DGGR
815-SN74CBT16861DGGR
 Ultralife

SN74CBT16861DGGR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.240, 6.10mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.There is a base part number of 74CBT16861 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.This turn signal switch contains 48 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.A configuration of 48 pins is used.It is positioned in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 20 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.A resistance of 2 governs its operation.This signal switching operates at a resistance of 22Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.

SN74CBT16861DGGR Features


Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16861DGGR Applications


There are a lot of Texas Instruments SN74CBT16861DGGR Signal Switches / Multiplexers / Decoders applications.

  • Speed control of medern motors
  • A/D converters
  • Data demultiplexing
  • High-performance memory systems
  • LVDS
  • Speed synchronization of multiple motors in industries
  • Metal detectors
  • Analog, digital or video signal switching
  • Audio transmission
  • Medical industry
999
In-stock
 Get Quote
SN74CBT16245CDGGR
815-SN74CBT16245CDGGR
 Ultralife

SN74CBT16245CDGGR Overview


For the purpose of saving board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.It is designed with 48 terminations as part of its basic configuration.The base part number is 74CBT16245, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 48 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.With 48 pins, it is configured.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 16 bits.Keeping Vsup at 4V will prevent some unwanted failures.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Without external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A TR packaging method is used in the switches.The system operates with a resistance of 2.A resistance of 12Ohm is used to operate the signal switching.For greater switches' flexibility, 64mA provides the output current.

SN74CBT16245CDGGR Features


Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16245CDGGR Applications


There are a lot of Texas Instruments SN74CBT16245CDGGR Signal Switches / Multiplexers / Decoders applications.

  • Electronically controlled engine system
  • To select different devices in microprocessor output
  • CNC machines
  • Memory chips
  • Make full adder
  • Enabling block of memory depending on address in memory chips
  • Medium scale TV wall
  • Encrypted communications system
  • Idle motor
  • Image transmission
999
In-stock
 Get Quote
SN74CB3Q16211DGVR
815-SN74CB3Q16211DGVR
 Ultralife

SN74CB3Q16211DGVR Overview


Digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Since they are members of the 74CB series, they can be used in a wide variety of applications.It is designed with 56 terminations as part of its basic configuration.The base part number is 74CB3Q16211, which is also useful when looking up signal switch's related components.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch contains 56 component pins.As a result, conductors end at GULL WING.This supply type employs Single.It is configured with 56 pins.It is positioned in the direction of Surface Mount.Signal multiplexer provides 24 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 3mA current of multiplexer ic.A TR packaging method is used in the switches.The signal switching operates with a resistance of 2.With a resistance of 9Ohm, it operates.For higher switches' flexibility, 30mA is provided as an output current.

SN74CB3Q16211DGVR Features


Supplied in the 56-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CB3Q16211DGVR Applications


There are a lot of Texas Instruments SN74CB3Q16211DGVR Signal Switches / Multiplexers / Decoders applications.

  • Enabling different rows of memory depending on address in memory chips
  • Control unit of Central Processing unit (CPU)
  • Steel plants
  • Transmission from the computer system of a satellite
  • Used to connect a single source to multiple destinations
  • Enabling different functions units in microprocessor instruction decoding
  • Medical industry
  • Frequency multiplexing system
  • High-performance memory systems
  • Encrypted communications system
999
In-stock
 Get Quote

Please send RFQ , we will respond immediately.