English
My Cart
Total：0Sub-Total : $0.00
Checkout

Force Sensors(6640)

Image Part Manufacturer Description Stock Action
SN74CBTLV3251RGYR
815-SN74CBTLV3251RGYR
 Ultralife
34382
In-stock
 Get Quote
SN74CBTLV3125RGYR
815-SN74CBTLV3125RGYR
 Ultralife

SN74CBTLV3125RGYR Overview


As a means of saving space, digital switch is provided in the 14-VFQFN Exposed Pad.It is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 14 terminations are designed as a part of it.The part number for 74CBTLV3125 can be used to find its logic switch related parts as well.In this case, 2.5V is the voltage supplied to the multiplexer's system.Signal switch has 14 component pins.In this case, the supply type is Single.A total of 14 pins are configured on this board.The mounting point is Surface Mount.Among the family of CBTLV/3B the logic switch is a member.In the signal multiplexer, there are 4 bits available.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without the influence of external factors, it consumes 10μA current of multiplexer ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.As far as the resistance is concerned, it operates with 2.This signal switching operates at a resistance of 7Ohm.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.Higher switches' flexibility is provided by providing 64mA as the output current.

SN74CBTLV3125RGYR Features


Supplied in the 14-VFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V

SN74CBTLV3125RGYR Applications


There are a lot of Texas Instruments SN74CBTLV3125RGYR Signal Switches / Multiplexers / Decoders applications.

  • A robotic vehicle with the metal detector
  • Memory chips
  • Video transmission
  • RF-based home automation system
  • Idle motor
  • Microprocessor memory systems
  • Microprocessor instruction decoding
  • Frequency multiplexing system
  • Logic gates for other digital devices
  • Logic circuits
999
In-stock
 Get Quote
SN74CBTLV3245ADBQR
815-SN74CBTLV3245ADBQR
 Ultralife

SN74CBTLV3245ADBQR Overview


Due to the fact that it is provided in the 20-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.There is a design for terminating 20 as part of its basic configuration.The base part number is 74CBTLV3245, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.With 20 pins, it is configured.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 8 bits in signal multiplexer.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 20μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.Currently, the switches is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.In addition, WITH DIRECTION CONTROL provides improved characteristics.For higher switches' flexibility, the output current is set to 64mA.

SN74CBTLV3245ADBQR Features


Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
WITH DIRECTION CONTROL

SN74CBTLV3245ADBQR Applications


There are a lot of Texas Instruments SN74CBTLV3245ADBQR Signal Switches / Multiplexers / Decoders applications.

  • Make full adder
  • Code converters
  • Microprocessor memory systems
  • Injectors
  • Memory chips
  • Video transmission
  • Relay
  • Small scale TV wall
  • Seven segment displays
  • Enabling block of memory depending on address in memory chips
999
In-stock
 Get Quote
SN74CB3Q3345PWR
815-SN74CB3Q3345PWR
 Ultralife

SN74CB3Q3345PWR Overview


As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.The basic configuration of this system includes 20 terminations.You can also find related parts by using its logic switch base part number of 74CB3Q3345.For multiplexer's system, 2.5V voltage is supplied.In this turn signal switch, there are 20 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.The multiplexer ic provides 8 bits.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 2mA current of multiplexer ic.The switches is packaged according to the way of TR.With a resistance of 0, it operates.In terms of resistance, it has a value of 9Ohm.Additionally, ALSO OPERATES WITH 3.3V SUPPLY provides improved characteristics.It is possible to provide a current output of 30mA for greater switches' flexibility.

SN74CB3Q3345PWR Features


Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY

SN74CB3Q3345PWR Applications


There are a lot of Texas Instruments SN74CB3Q3345PWR Signal Switches / Multiplexers / Decoders applications.

  • Medical industry
  • Combinational circuit
  • Arithmetic Logic Units
  • A/D converters
  • Small scale TV wall
  • Computer memory
  • Night vision cameras
  • Implementing boolean functions with multiple variables
  • Automatic health monitoring systems
  • Electronic circuits
999
In-stock
 Get Quote
SN74HC138DT
815-SN74HC138DT
 Ultralife

SN74HC138DT Overview


For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74HC series.There are 16 terminations included in its basic configuration.The base part number is 74HC138, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.There are 8 bits in signal multiplexer.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.Keeping Vsup at 6V will prevent some unnecessary failures.Normally, 2/6V is powered by a battery.For the turn signal switch's operation, there are 8 outputs.Decoder/Drivers is a category for the digital switch ics.In the absence of external influences, it consumes 8μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 3 inputs.The switches packaging is based on TR.A configuration element for the mux switch consists of 1 elements.

SN74HC138DT Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V

SN74HC138DT Applications


There are a lot of Texas Instruments SN74HC138DT Signal Switches / Multiplexers / Decoders applications.

  • To select different devices in microprocessor output
  • Small scale TV wall
  • Relay
  • A robotic vehicle with the metal detector
  • To select different devices in microprocessor input
  • Signal router
  • Home automation system
  • Injectors
  • High-performance memory systems
  • Combinational circuit
999
In-stock
 Get Quote
SN74CB3Q3244DGVR
815-SN74CB3Q3244DGVR
 Ultralife

SN74CB3Q3244DGVR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 20-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CB series.Its basic configuration includes terminations in the 20 range.The base part number is 74CB3Q3244, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 20 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 20 pins.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer consists of 8 bits.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without the influence of external factors, it consumes 2mA current of multiplexer ic.A TR packaging method is used in the switches.The system operates with a resistance of 2.In terms of resistance, it has a value of 5Ohm.

SN74CB3Q3244DGVR Features


Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CB3Q3244DGVR Applications


There are a lot of Texas Instruments SN74CB3Q3244DGVR Signal Switches / Multiplexers / Decoders applications.

  • Solenoid cooling fan
  • Automatic health monitoring systems
  • Image transmission
  • LVDS
  • High-performance memory systems
  • CPU memory location identification
  • To select different devices in microprocessor input
  • Seven segment displays
  • A robotic vehicle with the metal detector
  • Implementing boolean functions with multiple variables
999
In-stock
 Get Quote
SN74CB3Q3257PWRG4
815-SN74CB3Q3257PWRG4
 Ultralife

SN74CB3Q3257PWRG4 Overview


Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CB series are suitable for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74CB3Q3257.The multiplexer's system is powered by 2.5V volts.There are 16 component pins in this turn signal switch.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3Q/3VH/3C/2B family.Signal multiplexer consists of 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.A power supply is provided for mux switch's normal operation of 2.5/3.3V.The turn signal switch operates with 2 outputs.The part belongs to the Other Logic ICs category of signal switches.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.There are 8 inputs provided in this multiplexer.In accordance with TR, switches can be packaged.With a resistance of 4Ohm, it operates.

SN74CB3Q3257PWRG4 Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

SN74CB3Q3257PWRG4 Applications


There are a lot of Texas Instruments SN74CB3Q3257PWRG4 Signal Switches / Multiplexers / Decoders applications.

  • High-performance memory-decoding applications
  • To select different devices in microprocessor input
  • Implementing boolean functions with multiple variables
  • Speed control of medern motors
  • Memory system of computers
  • A/D converters
  • Decimal decoder
  • Memory chips
  • Relay
  • Make half adder
999
In-stock
 Get Quote
SN74CB3Q3244DBQR
815-SN74CB3Q3244DBQR
 Ultralife

SN74CB3Q3244DBQR Overview


In order to save board space, digital switch is located in the 20-SSOP (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.Bus Switch is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Multiplexers of the 74CB series can be used in a wide range of applications.The basic configuration includes 20 terminations.To find signal switch's related components, a base part number of 74CB3Q3244 may also be used.The multiplexer's system is supplied with a voltage of 2.5V.In this turn signal switch, there are 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.There are 8 bits signal multiplexer provides.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 2mA current of multiplexer ic.The signal switching is packaged by TR. The resistance of the signal switching is 2.5Ohm is the resistance at which it operates.

SN74CB3Q3244DBQR Features


Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single

SN74CB3Q3244DBQR Applications


There are a lot of Texas Instruments SN74CB3Q3244DBQR Signal Switches / Multiplexers / Decoders applications.

  • Textile mills
  • Automatic Monitoring systems
  • Control unit of Central Processing unit (CPU)
  • D/A converters
  • Frequency multiplexing system
  • Data demultiplexing
  • Idle motor
  • Video transmission
  • Electronically controlled engine system
  • GLAN
999
In-stock
 Get Quote
SN74CBTLV3383DWR
815-SN74CBTLV3383DWR
 Ultralife

SN74CBTLV3383DWR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.Bus FET Exchange Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.As parts of its basic configuration, 24 terminations are desgined.There is a base part number of 74CBTLV3383 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.The board has 24 pins configured.Surface Mount is the way it is mounted.The CBTLV/3B family includes the logic switch.In the signal multiplexer, there are 10 bits available.Vsup should be kept at 2.3V to prevent some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Without any external influences, it consumes 10μA current of multiplexer ic at all times.It is provided with 10 inputs.In accordance with TR, switches can be packaged.The resistance of the signal switching is 4.The resistance of the signal switching is 27Ohm.In addition, it provides improved characteristics compared to TTL COMPATIBLE BUS SWITCH.

SN74CBTLV3383DWR Features


Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
TTL COMPATIBLE BUS SWITCH

SN74CBTLV3383DWR Applications


There are a lot of Texas Instruments SN74CBTLV3383DWR Signal Switches / Multiplexers / Decoders applications.

  • PCIe
  • D/A converters
  • War field flying robot with a night vision flying camera
  • Microprocessor input/output systems
  • Data demultiplexing
  • Combinational circuit
  • To select different task for memory in microprocessor memory systems
  • Automatic health monitoring systems
  • A/D converters
  • CPU memory location identification
999
In-stock
 Get Quote
SN74CB3Q3251DBQR
815-SN74CB3Q3251DBQR
 Ultralife

SN74CB3Q3251DBQR Overview


Providing this information in the 16-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CB series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.As its base part number is 74CB3Q3251, logic switch can also be used to find its related parts.The multiplexer is supplied with 2.5V voltage.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.There are 16 pins on it.Surface Mount is the way it is mounted.There is a family of CB3Q/3VH/3C/2B members.Signal multiplexer provides 8 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.It is provided that 2.5/3.3V has a power supply in order to function normally.The turn signal switch has 8 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.Without the influence of external factors, it consumes 4mA current of multiplexer ic.The switches is packaged according to the way of TR.A resistance of 10Ohm is used to operate the signal switching.To ensure that the digitalswitch performs properly, 1 circuits are formed.In a load with a supply voltage of 4mA, stability of the multiplexers can be maintained.

SN74CB3Q3251DBQR Features


Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 4mA

SN74CB3Q3251DBQR Applications


There are a lot of Texas Instruments SN74CB3Q3251DBQR Signal Switches / Multiplexers / Decoders applications.

  • Computer memory
  • Implementing boolean functions with multiple variables
  • Audio transmission
  • Logic circuits
  • PCIe
  • High-performance memory-decoding applications
  • War field flying robot with a night vision flying camera
  • Signal router
  • CPU memory location identification
  • Recording transmission
999
In-stock
 Get Quote
SN74CBT3383DBR
815-SN74CBT3383DBR
 Ultralife

SN74CBT3383DBR Overview


As a means of saving space, digital switch is provided in the 24-SSOP (0.209, 5.30mm Width).The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.A digital IC Bus FET Exchange Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 24 terminations as part of its basic configuration.As its base part number is 74CBT3383, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 24 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.This multiplexer ic is configured with 24 pins.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 5V.The part belongs to the Other Logic ICs category of signal switches.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.In accordance with TR, switches can be packaged.With a resistance of 0, it operates.As far as the resistance is concerned, it operates with 10Ohm.In addition, TTL COMPATIBLE BUS SWITCH exhibits improved characteristics.There is an output current of 64mA that allows for greater switches' flexibility.

SN74CBT3383DBR Features


Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH

SN74CBT3383DBR Applications


There are a lot of Texas Instruments SN74CBT3383DBR Signal Switches / Multiplexers / Decoders applications.

  • Data transfer
  • Memory chips
  • Transmission from the computer system of a satellite
  • Analog to digital conversion
  • HDMI applications
  • Encrypted communications system
  • High-performance memory systems
  • Code conversion
  • Automatic health monitoring systems
  • Make full adder
999
In-stock
 Get Quote
SN74LS253DR
815-SN74LS253DR
 Ultralife

SN74LS253DR Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer.As long as the operating temperature is 0°C~70°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 4.75V~5.25V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74LS series are suitable for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74LS253, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A total of 16 pins are configured on this board.The mounting point is Surface Mount.In the LS family, the logic switch is included.In this signal multiplexer, there are 4 bits that are provided.For mux switch's normal operation, power supply 5V is provided.There are 1 outputs designed to operate the turn signal switch.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.It is provided with 8 inputs.Currently, the switches is packaged in accordance with the TR method.This turn signal switch's circuit uses 2 transmission channels.

SN74LS253DR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74LS253DR Applications


There are a lot of Texas Instruments SN74LS253DR Signal Switches / Multiplexers / Decoders applications.

  • Audio transmission
  • Seven segment displays
  • Relay
  • CPU memory location identification
  • Home automation system
  • To select different task for memory in microprocessor memory systems
  • Recording transmission
  • Combinational circuit
  • Data transfer
  • To select different devices in microprocessor input
999
In-stock
 Get Quote
SN74CB3Q3384APWR
815-SN74CB3Q3384APWR
 Ultralife

SN74CB3Q3384APWR Overview


As a means of saving space, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.As a member of 74CB series, the multiplexers can be used for a wide range of applications.The basic configuration includes 24 terminations.There is a base part number of 74CB3Q3384 which can also be used in order to locate the logic switch that are related to this item.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 24 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 24 pins.Surface Mount is the way it is mounted.The multiplexer ic provides 10 bits.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 2mA current of multiplexer ic.According to TR, the switches is packaged.The resistance of the signal switching is 2.9Ohm is the resistance at which it operates.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 3.3V SUPPLY.For increased switches' flexibility, the output current of 30mA is provided.

SN74CB3Q3384APWR Features


Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY

SN74CB3Q3384APWR Applications


There are a lot of Texas Instruments SN74CB3Q3384APWR Signal Switches / Multiplexers / Decoders applications.

  • Arithmetic Logic Units
  • To select different devices in microprocessor output
  • Image transmission
  • Home automation system
  • To select different devices in microprocessor input
  • Enabling block of memory depending on address in memory chips
  • Data distribution
  • CNC machines
  • Data bus control
  • VGA
999
In-stock
 Get Quote
SN74LS145NSR
815-SN74LS145NSR
 Ultralife

SN74LS145NSR Overview


This is a relatively small item of digital switch that is included in the 16-SOIC (0.209, 5.30mm Width) in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Decoder as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~70°C.With a supply voltage of 4.75V~5.25V, designers have greater flexibility of digital controlled switch.With the 74LS series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 16 terminations.To find signal switch's related components, a base part number of 74LS145 may also be used.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.In the LS family, the logic switch is included.Signal multiplexer consists of 10 bits.A power supply is provided for mux switch's normal operation of 5V.In order for the turn signal switch to work, there are 10 outputs.Supply voltages of 5V can provide reliable performance of the multiplexers.This multiplexer is equipped with 4 inputs and 4 outputs.The switches packaging is based on TR.It also provides improved characteristics of ION MAX=80MA @ VOL MAX=3V.Configuration elements for the mux switch consist of 1.

SN74LS145NSR Features


Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
ION MAX=80MA @ VOL MAX=3V

SN74LS145NSR Applications


There are a lot of Texas Instruments SN74LS145NSR Signal Switches / Multiplexers / Decoders applications.

  • To select different devices in microprocessor input
  • Medical industry
  • Telephone network
  • Small scale TV wall
  • Signal router
  • A/D converters
  • Solenoid cooling fan
  • Electronics industry
  • Analog to digital conversion
  • Control unit of Central Processing unit (CPU)
999
In-stock
 Get Quote
TCA9543ADR
815-TCA9543ADR
 Ultralife <h3>TCA9543ADR Overview</h3><div><br/>Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape &amp; Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch&#39;s superior flexibility for designers to use when it operates with a supply voltage of 1.65V~5.5V.provides digital controlled switch&#39;s digital controlled switch&#39;sThese multiplexers are members of the TCA series, which provide extensive application potential.Among its basic features are 14 terminations.As its base part number is CA9543, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 1.8V volts.As a result, GULL WING represents the end of the conductors.This supply type employs Single.This multiplexer ic has 14 pins configured.This unit is mounted in the way of Surface Mount.<br/><br/></div><h3>TCA9543ADR Features</h3><div><br/>Supplied in the 14-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Single<br/><br/></div><h3>TCA9543ADR Applications</h3><div><br/>There are a lot of Texas Instruments TCA9543ADR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>To select different devices in microprocessor input<!--<li--></li><li>Data communication<!--<li--></li><li>Image transmission<!--<li--></li><li>Automatic health monitoring systems<!--<li--></li><li>Code converters<!--<li--></li><li>RF-based home automation system<!--<li--></li><li>Computer memory<!--<li--></li><li>Textile mills<!--<li--></li><li>Decimal decoder<!--<li--></li><li>Make full adder<!--<li--></li></ul>
999
In-stock
 Get Quote
SN74CB3Q3384ADBQR
815-SN74CB3Q3384ADBQR
 Ultralife

SN74CB3Q3384ADBQR Overview


Digital switch is provided in the 24-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CB series can be used in a wide range of applications.The basic configuration of this system includes 24 terminations.To find signal switch's related components, a base part number of 74CB3Q3384 may also be used.For multiplexer's system, 2.5V voltage is supplied.A component pin count of 24 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.The board has 24 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The multiplexer ic provides 10 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 2mA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.2 is the resistance at which it operates.The system operates with a resistance of 9Ohm.In addition, it provides improved features of ALSO OPERATES WITH 3.3V SUPPLY.30mA provides a high degree of switches' flexibility.

SN74CB3Q3384ADBQR Features


Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY

SN74CB3Q3384ADBQR Applications


There are a lot of Texas Instruments SN74CB3Q3384ADBQR Signal Switches / Multiplexers / Decoders applications.

  • Medical industry
  • CNC machines
  • Small scale TV wall
  • Steel plants
  • Automatic Monitoring systems
  • Metal detectors
  • Video transmission
  • Injectors
  • Analog to digital conversion
  • HDMI applications
999
In-stock
 Get Quote
SN74ALS139DR
815-SN74ALS139DR
 Ultralife

SN74ALS139DR Overview


For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).It is packaged in the way of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74ALS series, these multiplexers have a wide range of applications.Among its basic features are 16 terminations.There is a base part number of 74ALS139 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.Signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of ALS the logic switch is a member.The multiplexer ic provides 4 bits.For mux switch's normal operation, there is a power supply provided at 5V.In order for the turn signal switch to work, there are 4 outputs.This is an the digital switch ic that is classified as Decoder/Drivers.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.Currently, the switches is packaged in accordance with the TR method.Normally, the digitalswitch consists of 2 circuits.

SN74ALS139DR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS139DR Applications


There are a lot of Texas Instruments SN74ALS139DR Signal Switches / Multiplexers / Decoders applications.

  • To select different devices in microprocessor output
  • Audio transmission
  • Automation system
  • Data collection system
  • Make full adder
  • Medical industry
  • Data-routing applications
  • CPU memory location identification
  • LVDS
  • Robotic vehicles
999
In-stock
 Get Quote
SN74LS258BDR
815-SN74LS258BDR
 Ultralife

SN74LS258BDR Overview


This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .As the analog part, the circuit uses an analog IC Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.Using a 4.75V~5.25V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74LS series can be used for a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74LS258, which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the LS family.As a result, signal multiplexer provides 2 bits.The power supply of 5V is provided for mux switch's normal operation.There are 1 outputs designed for the operation of the turn signal switch.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The multiplexer is equipped with 8 inputs.The switches is packaged according to the way of TR.The turn signal switch's circuit has 4 transmission channels.

SN74LS258BDR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74LS258BDR Applications


There are a lot of Texas Instruments SN74LS258BDR Signal Switches / Multiplexers / Decoders applications.

  • HDMI applications
  • Time division multiplexing system
  • Automatic Monitoring systems
  • Microprocessor instruction decoding
  • To select different devices in microprocessor output
  • Control unit of Central Processing unit (CPU)
  • CNC machines
  • Speed synchronization of multiple motors in industries
  • D/A converters
  • Recording transmission
999
In-stock
 Get Quote
SN74CB3Q3345RGYR
815-SN74CB3Q3345RGYR
 Ultralife

SN74CB3Q3345RGYR Overview


Digital switch is provided in the 20-VFQFN Exposed Pad for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers of the 74CB series can be used in a wide range of applications.This configuration includes 20 terminations as part of its basic functionality.There is a base part number 74CB3Q3345 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 2.5V is supplied.Currently, this turn signal switch has a total of 20 component pins.As a result, NO LEAD represents the end of the conductors.Its supply type is Single, which is used as the source of power.A configuration of 20 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.In this signal multiplexer, there are 8 bits provided.Keeping Vsup at 2.3V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 2.5/3.3V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.No external influence consumes 2mA current of multiplexer ic.A TR packaging method is used in the switches.2 is the resistance at which it operates.The system operates with a resistance of 9Ohm.In addition, ALSO OPERATES WITH 3.3V SUPPLY provides improved characteristics.For higher switches' flexibility, 30mA is provided as an output current.

SN74CB3Q3345RGYR Features


Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
ALSO OPERATES WITH 3.3V SUPPLY

SN74CB3Q3345RGYR Applications


There are a lot of Texas Instruments SN74CB3Q3345RGYR Signal Switches / Multiplexers / Decoders applications.

  • Relay
  • Data distribution
  • To select different task for memory in microprocessor memory systems
  • D/A converters
  • Electronics industry
  • War field flying robot with a night vision flying camera
  • Medium scale TV wall
  • Small scale TV wall
  • Decimal decoder
  • Code conversion
999
In-stock
 Get Quote
SN74ALS157AN
815-SN74ALS157AN
 Ultralife

SN74ALS157AN Overview


Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.As a result, it is packaged in the way of Tube.The method digital switch ic adopts for mounting is Through Hole.In the multiplexers, the analog IC is indicated by Multiplexer.A temperature of 0°C~70°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74ALS series multiplexers.The basic configuration includes 16 terminations.The base part number is 74ALS157, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 16 component pins.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Through Hole.The ALS family includes the logic switch.As a result, signal multiplexer provides a total of 2 bits.For mux switch's normal operation, there is a power supply provided at 5V.The turn signal switch contains 1 outputs designed to operate.It consumes 6mA current of multiplexer ic without external influences.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.This multiplexer has a total of 8 inputs.Transmission is carried out over 4 channels in the turn signal switch's circuit.

SN74ALS157AN Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS157AN Applications


There are a lot of Texas Instruments SN74ALS157AN Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor input/output systems
  • Decimal decoder
  • LVDS
  • Textile mills
  • Data demultiplexing
  • Metal detectors
  • Code converters
  • Electronics industry
  • Logic circuits
  • High-performance memory-decoding applications
999
In-stock
 Get Quote
SN74CB3T3383DGVR
815-SN74CB3T3383DGVR
 Ultralife

SN74CB3T3383DGVR Overview


This is a relatively small item of digital switch that is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus FET Exchange Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CB series multiplexers.As parts of its basic configuration, 24 terminations are desgined.The part number for 74CB3T3383 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 2.5V volts.Currently, this turn signal switch has a total of 24 component pins.GULL WING represents the end of conductors.This supply type employs Single.Currently, it is configured with 24 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the CB3T/3VT family.There are 2 bits in signal multiplexer.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The turn signal switch has 10 outputs.Other Logic ICs is the classification for this the digital switch ic.It consumes 20μA current of multiplexer ic without external influences.The signal switching is packaged by TR. The resistance of the signal switching is 4.This signal switching operates at a resistance of 5Ohm.

SN74CB3T3383DGVR Features


Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

SN74CB3T3383DGVR Applications


There are a lot of Texas Instruments SN74CB3T3383DGVR Signal Switches / Multiplexers / Decoders applications.

  • Communication system
  • High-performance memory systems
  • Electronics industry
  • Memory chips
  • Analog, digital or video signal switching
  • Memory system of computers
  • Data-routing applications
  • GLAN
  • To select different devices in microprocessor input
  • Microprocessor memory systems
999
In-stock
 Get Quote
74AC11138DR
815-74AC11138DR
 Ultralife

74AC11138DR Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~5.5V voltage.In addition to being a member of the 74AC series, these multiplexers have a wide range of applications.As its base part number is 74AC11138, logic switch can also be used to find its related parts.As a type of supply, Single is employed.The board is configured with 16 pins.It is positioned in the direction of Surface Mount.The multiplexer ic provides 8 bits.The turn signal switch operates with 8 outputs.It consumes 4μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer has 3 inputs.It contains 1 elements in mux switch configuration.

74AC11138DR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

74AC11138DR Applications


There are a lot of Texas Instruments 74AC11138DR Signal Switches / Multiplexers / Decoders applications.

  • Automatic health monitoring systems
  • Data transfer
  • Medium scale TV wall
  • D/A converters
  • War field flying robot with a night vision flying camera
  • Steel plants
  • Encrypted communications system
  • Image transmission
  • Memory system of computers
  • High-performance memory systems
999
In-stock
 Get Quote
SN74ALS257AN
815-SN74ALS257AN
 Ultralife

SN74ALS257AN Overview


Due to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Through Hole.The analog IC used in the multiplexers can be referred to as Multiplexer.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74ALS series multiplexers.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74ALS257, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.In this case, the supply type is Single.A total of 16 pins are configured on this board.The mounting is in the way of Through Hole.In the ALS family, the logic switch is included.In this signal multiplexer, there are 2 bits provided.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.Without the influence of external factors, it consumes 9mA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.In the turn signal switch's circuit, there are 4 channels used for transmission.

SN74ALS257AN Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS257AN Applications


There are a lot of Texas Instruments SN74ALS257AN Signal Switches / Multiplexers / Decoders applications.

  • Control unit of Central Processing unit (CPU)
  • Electronically controlled engine system
  • Audio transmission
  • Electronic circuits
  • Frequency multiplexing system
  • Seven segment displays
  • Home automation system
  • CPU memory location identification
  • High-performance memory systems
  • Medical industry
999
In-stock
 Get Quote
TCA9548AMRGER
815-TCA9548AMRGER
 Ultralife

TCA9548AMRGER Overview


Due to the lack of space on the board, digital switch is provided in the 24-VFQFN Exposed Pad.As a result, it is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 1.65V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers from the TCA series can be used in a wide range of applications.It is designed with 24 terminations as part of its basic configuration.There is a base part number of CA9548 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 1.8V voltage is supplied.As a result, NO LEAD represents the end of the conductors.With 24 pins, it is configured.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.As a result, the turn signal switch consists of 8 outputs.Additionally, ALSO OPERATES AT VCC 2.3V TO 3.6V provides improved characteristics.

TCA9548AMRGER Features


Supplied in the 24-VFQFN Exposed Pad package
ALSO OPERATES AT VCC 2.3V TO 3.6V

TCA9548AMRGER Applications


There are a lot of Texas Instruments TCA9548AMRGER Signal Switches / Multiplexers / Decoders applications.

  • Enabling different functions units in microprocessor instruction decoding
  • CPU memory location identification
  • Idle motor
  • Implementing boolean functions with multiple variables
  • Automation system
  • HDMI applications
  • High-performance memory-decoding applications
  • Robotic vehicles
  • Microprocessor input/output systems
  • Night vision cameras
2
In-stock
 Get Quote
SN74CB3T3383PWR
815-SN74CB3T3383PWR
 Ultralife

SN74CB3T3383PWR Overview


Digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CB series can be used for a wide range of applications.Its basic configuration includes terminations in the 24 range.The part number for 74CB3T3383 can be used to find its logic switch related parts as well.The multiplexer is supplied with 2.5V voltage.A component pin count of 24 is found on this turn signal switch.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CB3T/3VT family.As a result, signal multiplexer provides a total of 2 bits.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 2.5/3.3V to operate normally, a power supply is provided.The turn signal switch has 10 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.TR is used to package the switches.The resistance is 4.With a resistance of 5Ohm, it operates.

SN74CB3T3383PWR Features


Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

SN74CB3T3383PWR Applications


There are a lot of Texas Instruments SN74CB3T3383PWR Signal Switches / Multiplexers / Decoders applications.

  • Robotic vehicles
  • Textile mills
  • Computer memory
  • Arithmetic Logic Units
  • Automation system
  • Solenoid cooling fan
  • HD surveillance system
  • A/D converters
  • Medium scale TV wall
  • Logic circuits
999
In-stock
 Get Quote
CCBTLV3861IPWRG4Q1
815-CCBTLV3861IPWRG4Q1
 Ultralife

CCBTLV3861IPWRG4Q1 Overview


It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the Automotive, AEC-Q100, 74CBTLV series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.The base part number is CBTLV3861, which can also be used to find its logic switch related parts.The multiplexer's system works with 2.5V voltage.This turn signal switch has 24 component pins.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.A configuration of 24 pins is used.The mounting is in the way of Surface Mount.The logic switch is included into the family of CBTLV/3B.The multiplexer ic provides 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Normally, 2.5/3.3V is powered by a battery.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The signal switching is packaged by TR. The resistance is 2.The system operates with a resistance of 40Ohm.

CCBTLV3861IPWRG4Q1 Features


Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V

CCBTLV3861IPWRG4Q1 Applications


There are a lot of Texas Instruments CCBTLV3861IPWRG4Q1 Signal Switches / Multiplexers / Decoders applications.

  • Idle motor
  • CNC machines
  • Data collection system
  • Computer memory
  • Video transmission
  • Microprocessor instruction decoding
  • Code converters
  • Image transmission
  • Automation system
  • Textile mills
999
In-stock
 Get Quote
SN74CBT16232DGGR
815-SN74CBT16232DGGR
 Ultralife

SN74CBT16232DGGR Overview


As a means of saving space, digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width).In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CBT series can be used in a wide range of applications.The basic configuration includes 56 terminations.To find signal switch's related components, a base part number of 74CBT16232 may also be used.For multiplexer's system, 5V voltage is supplied.There are 56 component pins in this turn signal switch.As a result, conductors end at GULL WING.In this case, the supply type is Single.The board is configured with 56 pins.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 32 bits.Keep Vsup at 4V to avoid unnecessary failures.mux switch's normal operation requires the power supply of 5V.As part of the operation of this turn signal switch, there are 2 outputs.This is an the digital switch ic that is classified as Other Logic ICs.There are no external influences on this multiplexer ic, so it consumes 3μA current.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches packaging is based on TR.In terms of resistance, it has a value of 7Ohm.There are a total of 16 channels used for transmitting data in the turn signal switch's circuit.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA.

SN74CBT16232DGGR Features


Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA

SN74CBT16232DGGR Applications


There are a lot of Texas Instruments SN74CBT16232DGGR Signal Switches / Multiplexers / Decoders applications.

  • Data bus control
  • Automation system
  • Image transmission
  • Home automation system
  • Automatic Monitoring systems
  • Microprocessor input/output systems
  • Robotic vehicles
  • Data transfer
  • Electronics industry
  • Solenoid cooling fan
999
In-stock
 Get Quote
SN74ALS157ANSR
815-SN74ALS157ANSR
 Ultralife

SN74ALS157ANSR Overview


Due to the fact that it is provided in the 16-SOIC (0.209, 5.30mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Multiplexer is used.As long as the operating temperature is 0°C~70°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Since they are members of the 74ALS series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.In addition, it also has a base part number of 74ALS157, which can be used to find related parts.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.As a result, conductors end at GULL WING.As a type of supply, Single is employed.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of ALS.As a result, signal multiplexer provides a total of 2 bits.In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 1 outputs.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer provides 8 inputs.The switches package is packaged in accordance with the TR method.For transmission, there are 4 channels in the turn signal switch's circuit.

SN74ALS157ANSR Features


Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS157ANSR Applications


There are a lot of Texas Instruments SN74ALS157ANSR Signal Switches / Multiplexers / Decoders applications.

  • Paper plants
  • CNC machines
  • A/D converters
  • Signal router
  • Video transmission
  • Analog, digital or video signal switching
  • Seven segment displays
  • Idle motor
  • Solenoid cooling fan
  • Electronically controlled engine system
999
In-stock
 Get Quote
SN74CB3T3253DR
815-SN74CB3T3253DR
 Ultralife

SN74CB3T3253DR Overview


As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.Since they are members of the 74CB series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74CB3T3253 which can also be used in order to locate the logic switch that are related to this item.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.As a type of supply, Single is employed.The board has 16 pins configured.The mounting is in the way of Surface Mount.The CB3T/3VT family includes the logic switch.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is a part of an electronic system classified as Other Logic ICs.In the absence of external influences, it consumes 20μA current of multiplexer ic.The switches packaging is based on TR.With a resistance of 8Ohm, it operates.2 circuits are formed for the normal operation of the digitalswitch.

SN74CB3T3253DR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single

SN74CB3T3253DR Applications


There are a lot of Texas Instruments SN74CB3T3253DR Signal Switches / Multiplexers / Decoders applications.

  • Enabling block of memory depending on address in memory chips
  • Make half adder
  • Relay
  • Audio transmission
  • Logic circuits
  • Time division multiplexing system
  • Logic gates for other digital devices
  • Night vision cameras
  • Encrypted communications system
  • Arithmetic Logic Units
999
In-stock
 Get Quote
SN74CB3T3253DGVR
815-SN74CB3T3253DGVR
 Ultralife

SN74CB3T3253DGVR Overview


For the purpose of saving board space, digital switch is included in the 16-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Since they are members of the 74CB series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74CB3T3253, so you can find its logic switch related parts using that number.The multiplexer's system works with 2.5V voltage.This turn signal switch consists of 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch belongs to the family of CB3T/3VT.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.The turn signal switch has 4 outputs designed for operation.There are no external influences on this multiplexer ic, so it consumes 20μA current.This multiplexer has 8 inputs.The switches package is packaged in accordance with TR.8Ohm is the resistance at which it operates.2 circuits are formed for the normal operation of the digitalswitch.

SN74CB3T3253DGVR Features


Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74CB3T3253DGVR Applications


There are a lot of Texas Instruments SN74CB3T3253DGVR Signal Switches / Multiplexers / Decoders applications.

  • Decimal decoder
  • Code converters
  • Enabling different rows of memory depending on address in memory chips
  • Analog, digital or video signal switching
  • Metal detectors
  • Electronics industry
  • Speed control of medern motors
  • High-performance memory-decoding applications
  • Transmission from the computer system of a satellite
  • Control unit of Central Processing unit (CPU)
999
In-stock
 Get Quote

Please send RFQ , we will respond immediately.