My CartForce Sensors(6640)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | SN74LVC1G139DCUR OverviewThis is a relatively small item of digital switch that is included in the 8-VFSOP (0.091, 2.30mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 1.65V~5.5V, designers have superior flexibility.Since they are members of the 74LVC series, they can be used in a wide variety of applications.As part of its basic configuration, 8 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74LVC1G139 may also be used.For multiplexer's system, 1.8V voltage is supplied.In this turn signal switch, there are 8 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.The board is configured with 8 pins.The mounting is in the way of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.As a result, signal multiplexer provides a total of 1 bits.Avoid unnecessary failures by keeping Vsup at 5.5V.There is a power supply provided for the mux switch's normal operation of 3.3V.The turn signal switch has 4 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.This multiplexer has 2 inputs.The switches is packaged according to the way of TR.As a result of the operation of the digitalswitch, 1 circuits are formed. SN74LVC1G139DCUR FeaturesSupplied in the 8-VFSOP (0.091, 2.30mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC1G139DCUR ApplicationsThere are a lot of Texas Instruments SN74LVC1G139DCUR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | <h3>SN74HC157DR Overview</h3><div><br/>As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.There are 16 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74HC157.The multiplexer is supplied with 5V voltage.There are 16 component pins in this turn signal switch.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of HC/UH.Signal multiplexer consists of 2 bits.Keep Vsup at 2V to avoid unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.The turn signal switch operates with 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer provides 8 inputs.According to TR, the switches is packaged.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.<br/><br/></div><h3>SN74HC157DR Features</h3><div><br/>Supplied in the 16-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Single<br/>Operating with the supply voltage of 5V<br/><br/></div><h3>SN74HC157DR Applications</h3><div><br/>There are a lot of Texas Instruments SN74HC157DR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Automation system<!--<li--></li><li>Image transmission<!--<li--></li><li>War field flying robot with a night vision flying camera<!--<li--></li><li>Logic circuits<!--<li--></li><li>Analog to digital conversion<!--<li--></li><li>Time division multiplexing system <!--<li--></li><li>Relay<!--<li--></li><li>Arithmetic Logic Units<!--<li--></li><li>Signal router<!--<li--></li><li>Code conversion<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CBT3251PWR OverviewAs a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Since they are members of the 74CBT series, they can be used in a wide variety of applications.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74CBT3251, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 16 component pins.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.During mux switch's normal operation, 5V is provided with a power supply.The turn signal switch contains 8 outputs designed to operate.The part belongs to the Other Logic ICs category of signal switches.Not being affected by the external factors, consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The switches package is packaged in a way which is consistent with TR.The resistance of the signal switching is 15Ohm.A configuration element for the mux switch consists of 1 elements.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA. SN74CBT3251PWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V Operating with the supply current of 3μA SN74CBT3251PWR ApplicationsThere are a lot of Texas Instruments SN74CBT3251PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CB3Q3306APWR OverviewThis is a relatively small item of digital switch that is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74CB series, which provide extensive application potential.As part of its basic configuration, 8 terminations are designed as a part of it.Its logic switch base part number is 74CB3Q3306 which can also be used to find its logic switch related parts.For multiplexer's system, 2.5V voltage is supplied.Currently, this turn signal switch has a total of 8 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the signal multiplexer, there are 1 bits available.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.It consumes 700μA current of multiplexer ic without external influences.TR is used to package the switches.A resistance of 2 is used to operate the signal switching.With a resistance of 9Ohm, it operates.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.For higher switches' flexibility, the output current is set to 30A. SN74CB3Q3306APWR FeaturesSupplied in the 8-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74CB3Q3306APWR ApplicationsThere are a lot of Texas Instruments SN74CB3Q3306APWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CB3T1G125DBVR OverviewFor the purpose of saving board space, digital switch is included in the SC-74A, SOT-753.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CB series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 5 terminations.To find signal switch's related components, a base part number of 74CB3T1G125 may also be used.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 5 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.There are 5 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of CB3T/3VT.In this signal multiplexer, there are 1 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 20μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 8Ohm.There are 1 elements used for the mux switch configuration. SN74CB3T1G125DBVR FeaturesSupplied in the SC-74A, SOT-753 package Adopting a supply type of Single SN74CB3T1G125DBVR ApplicationsThere are a lot of Texas Instruments SN74CB3T1G125DBVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TCA9546APWR OverviewAs a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 1.65V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of TCA series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 16 terminations.You can also find related parts by using its logic switch base part number of CA9546.In this case, 1.8V is the voltage supplied to the multiplexer's system.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 16 pins.The mounting point is Surface Mount. TCA9546APWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single TCA9546APWR ApplicationsThere are a lot of Texas Instruments TCA9546APWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CB3Q3305PWR OverviewDue to the fact that it is provided in the 8-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.As a member of 74CB series, the multiplexers can be used for a wide range of applications.It is designed with 8 terminations as part of its basic configuration.The base part number is 74CB3Q3305, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 2.5V voltage.This turn signal switch has a total of 8 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.A total of 8 pins are configured on this board.The mounting is in the way of Surface Mount.Signal multiplexer provides 1 bits.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.Bus Driver/Transceivers is a category for the digital switch ics.In the absence of external influences, it consumes 700μA current of multiplexer ic.A TR packaging method is used in the switches.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 9Ohm.This turn signal switch's circuit uses 2 transmission channels.Also, it provides an improved version of the characteristics of ALSO OPERATES WITH 3.3V SUPPLY.For greater switches' flexibility, 30mA provides the output current. SN74CB3Q3305PWR FeaturesSupplied in the 8-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single ALSO OPERATES WITH 3.3V SUPPLY SN74CB3Q3305PWR ApplicationsThere are a lot of Texas Instruments SN74CB3Q3305PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CBTLV3126RGYR OverviewIn order to conserve board space, digital switch is included in the 14-VFQFN Exposed Pad.As a result, it is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sThe multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.As part of its basic configuration, 14 terminations are designed as a part of it.In addition, it also has a base part number of 74CBTLV3126, which can be used to find related parts.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch consists of 14 component pins.This supply type employs Single.There are 14 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBTLV/3B the logic switch is a member.As a result, signal multiplexer provides 4 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.The turn signal switch's circuit consists of 4 transmission channels.It is possible to provide a current output of 64mA for greater switches' flexibility. SN74CBTLV3126RGYR FeaturesSupplied in the 14-VFQFN Exposed Pad package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN74CBTLV3126RGYR ApplicationsThere are a lot of Texas Instruments SN74CBTLV3126RGYR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74CB3Q3257PWR OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CB series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74CB3Q3257 may also be used.The multiplexer is supplied with 2.5V voltage.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.Avoid unnecessary failures by keeping Vsup at 3.6V.There are 2 outputs designed for the operation of the turn signal switch.In electronic terms, the digital switch ic is classified as Other Logic ICs.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.The multiplexer provides 1 inputs.TR is used to package the switches.In terms of resistance, it has a value of 9Ohm.A normal operation of the digitalswitch requires 4 circuits.When a voltage supply of 1.5mA is delivered to the load, stability of the multiplexers can be maintained. SN74CB3Q3257PWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Operating with the supply current of 1.5mA SN74CB3Q3257PWR ApplicationsThere are a lot of Texas Instruments SN74CB3Q3257PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC138N OverviewDue to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube is the packaging method.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Several applications are possible for 74HC series multiplexers.The basic configuration includes 16 terminations.In addition, it also has a base part number of 74HC138, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.Signal switch has 16 component pins.Single is used as its supply type.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Through Hole.The logic switch object belongs to the family of HC/UH.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.The power supply of 2/6V is provided for mux switch's normal operation.This turn signal switch has 8 outputs designed for its operation.Decoder/Drivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 8μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.It has 3 inputs.To operate the digitalswitch normally, 1 circuits are formed. SN74HC138N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC138N ApplicationsThere are a lot of Texas Instruments SN74HC138N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS3DV642A0RUAR OverviewFor the purpose of saving board space, digital switch is included in the 42-WFQFN Exposed Pad.Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2.6V~4.5V voltage.There is a design for terminating 42 as part of its basic configuration.In addition, it also has a base part number of TS3DV642, which can be used to find related parts.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 42 pins.The mounting point is Surface Mount.As a result, signal multiplexer provides a total of 12 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.6V.Keeping Vsup at 4.5V will prevent some unnecessary failures.When a supply voltage of 3V is used, reliable performance of the multiplexers can be achieved.This multiplexer provides 24 inputs.It operates with a resistance of 10.5Ohm.When 50μA is delivered to the load, stability of the multiplexers can be maintained. TS3DV642A0RUAR FeaturesSupplied in the 42-WFQFN Exposed Pad package Adopting a supply type of Single Operating with the supply voltage of 3V Operating with the supply current of 50μA TS3DV642A0RUAR ApplicationsThere are a lot of Texas Instruments TS3DV642A0RUAR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TCA9543APWR OverviewDigital switch is provided in the 14-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 1.65V~5.5V voltage.Several applications are possible for TCA series multiplexers.As parts of its basic configuration, 14 terminations are desgined.To find signal switch's related components, a base part number of CA9543 may also be used.The multiplexer's system is powered by 1.8V volts.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.Currently, it is configured with a 14 pin configuration.The mount is in Surface Mount.A resistance of 16Ohm is used to operate the signal switching. TCA9543APWR FeaturesSupplied in the 14-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single TCA9543APWR ApplicationsThere are a lot of Texas Instruments TCA9543APWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TCA9548ARGER OverviewProviding this information in the 24-VFQFN Exposed Pad enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 1.65V~5.5V voltage.Multiplexers in the TCA series are suitable for a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.To find signal switch's related components, a base part number of CA9548 may also be used.The multiplexer's system is powered by 1.8V volts.Single is employed as its supply type.It is configured with 24 pins.The mounting point is Surface Mount.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.The turn signal switch has 8 outputs designed for operation.It operates with a resistance of 70Ohm.The characteristics of ALSO OPERATES AT VCC 2.3V TO 3.6V are also improved. TCA9548ARGER FeaturesSupplied in the 24-VFQFN Exposed Pad package Adopting a supply type of Single ALSO OPERATES AT VCC 2.3V TO 3.6V TCA9548ARGER ApplicationsThere are a lot of Texas Instruments TCA9548ARGER Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS145DR OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Decoder.The operating temperature of 0°C~70°C will not be susceptible to external factors.When digital controlled switch operates at 4.75V~5.25V, designers have superior flexibility.The multiplexers from 74LS series can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.In addition, it also has a base part number of 74LS145, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 is found on this turn signal switch.A conductor terminates at GULL WING.As a type of supply, Single is employed.There are 16 pins on it.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the LS family.In this signal multiplexer, there are 10 bits that are provided.During mux switch's normal operation, 5V is provided with a power supply.For the turn signal switch's operation, there are 10 outputs.No external influence consumes 7mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.It has 4 inputs.In accordance with TR, switches can be packaged.Additionally, it improves the characteristics of ION MAX=80MA @ VOL MAX=3V.This mux switch configuration has 1 elements. SN74LS145DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V ION MAX=80MA @ VOL MAX=3V SN74LS145DR ApplicationsThere are a lot of Texas Instruments SN74LS145DR Signal Switches / Multiplexers / Decoders applications.
|
551
In-stock
|
Get Quote | |||
| Ultralife | <h3>CD4066BM96 Overview</h3><div><br/>Providing this information in the 14-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.In this case, it is packaged as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bilateral, FET Switches is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 14 range.Its logic switch base part number is CD4066 which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.A component pin count of 14 can be found on this turn signal switch.As a result, conductors end at GULL WING.Dual, Single is employed as its supply type.The board is configured with 14 pins.The mount is in Surface Mount.A power supply is provided for mux switch's normal operation of 5/15V.Multiplexer or Switches is a category for the digital switch ics.In the absence of external influences, it consumes 20nA current of multiplexer ic.A resistance of 240Ohm is used to operate the signal switching.Transmission is carried out over 4 channels in the turn signal switch's circuit.<br/><br/></div><h3>CD4066BM96 Features</h3><div><br/>Supplied in the 14-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Dual, Single<br/>Power supplies of 5/15V<br/><br/></div><h3>CD4066BM96 Applications</h3><div><br/>There are a lot of Texas Instruments CD4066BM96 Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Frequency multiplexing system<!--<li--></li><li>Arithmetic Logic Units<!--<li--></li><li>D/A converters<!--<li--></li><li>Electronic circuits<!--<li--></li><li>Decimal decoder<!--<li--></li><li>Analog to digital conversion<!--<li--></li><li>Memory system of computers<!--<li--></li><li>Automatic Monitoring systems<!--<li--></li><li>Solenoid cooling fan<!--<li--></li><li>To select different devices in microprocessor input<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| APS | SY58038UMY OverviewProviding this information in the 44-VFQFN Exposed Pad, 44-MLF? enables digital switch board space to be saved.Tray is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.375V~2.625V 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the Precision Edge? series are suitable for a wide range of applications.As parts of its basic configuration, 44 terminations are desgined.The base part number is 58038, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 2.5V.There is a type of supply of Single.It is configured with 44 pins.It is mounted in the way of Surface Mount.This turn signal switch has 2 outputs designed for its operation.The turn signal switch's circuit consists of 8 channels that are being used for transmission in the circuit.Furthermore, the characteristics of ALSO OPERATES AT 3.3V SUPPLY have been improved. SY58038UMY FeaturesSupplied in the 44-VFQFN Exposed Pad, 44-MLF? package Adopting a supply type of Single ALSO OPERATES AT 3.3V SUPPLY SY58038UMY ApplicationsThere are a lot of Microchip Technology SY58038UMY Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN65LVDS125ADBT OverviewDue to the fact that it is provided in the 38-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.Digital switch ic uses a Surface Mount mounting method.A digital IC Crosspoint Switch is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~3.6V voltage.Since they are members of the 65LVDS series, they can be used in a wide variety of applications.Among its basic configurations are 38 terminations.As its base part number is 65LVDS125, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch contains 38 component pins.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.There are 38 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.This is an the digital switch ic that is classified as Multiplexer or Switches.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.This turn signal switch's circuit is based on a circuit with 4 channels. SN65LVDS125ADBT FeaturesSupplied in the 38-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN65LVDS125ADBT ApplicationsThere are a lot of Texas Instruments SN65LVDS125ADBT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| APS | SY58040UMY OverviewProviding this information in the 44-VFQFN Exposed Pad, 44-MLF? enables digital switch board space to be saved.The package is in the form of Tray.The mounting method digital switch ic uses is Surface Mount.Crosspoint Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2.375V~2.625V 3V~3.6V voltage.Since they are members of the Precision Edge? series, they can be used in a wide variety of applications.This configuration includes 44 terminations as part of its basic functionality.There is a base part number 58040 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThere is a type of supply of Single.This multiplexer ic has 44 pins configured.The mounting is in the way of Surface Mount.Keep Vsup at 2.375V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 2.625V so as to avoid some unnecessary failures.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. SY58040UMY FeaturesSupplied in the 44-VFQFN Exposed Pad, 44-MLF? package Adopting a supply type of Single Operating with the supply voltage of 3.3V SY58040UMY ApplicationsThere are a lot of Microchip Technology SY58040UMY Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC138PWR OverviewProviding this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Cut Tape (CT) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.With the 74HC series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.In addition, it also has a base part number of 74HC138, which can be used to find related parts.The multiplexer is supplied with 5V voltage.A component pin count of 16 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.In the HC/UH family, the logic switch is included.As a result, signal multiplexer provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.In order for the turn signal switch to work, there are 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without any external influences, it consumes 8μA current of multiplexer ic at all times.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 3 inputs.In accordance with TR, switches can be packaged.In order for the digitalswitch to function normally, it has 1 circuits. SN74HC138PWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC138PWR ApplicationsThere are a lot of Texas Instruments SN74HC138PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC1G18DBVR OverviewIt is included in the SOT-23-6 in order to save board space.Cut Tape (CT) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.65V~5.5V, designers have superior flexibility.Multiplexers in the 74LVC series are suitable for a wide range of applications.The basic configuration of this system includes 6 terminations.You can also find related parts by using its logic switch base part number of 74LVC1G18.The multiplexer is supplied with 1.8V voltage.In this turn signal switch, there are 6 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.It is configured with 6 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.In this signal multiplexer, there are 1 bits that are provided.Avoid unnecessary failures by keeping Vsup at 5.5V.In order to maintain mux switch's normal operation, power is provided to 3.3V.The part belongs to the Decoder/Drivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 10μA current.The switches package is packaged in a way which is consistent with TR.It is possible to accept voltage levels through 1 input lines of multiplexers.A signal source has 2 output lines.Transmission is carried out over 1 channels in the turn signal switch's circuit. SN74LVC1G18DBVR FeaturesSupplied in the SOT-23-6 package Adopting a supply type of Single Power supplies of 3.3V 1 input lines 2 output lines SN74LVC1G18DBVR ApplicationsThere are a lot of Texas Instruments SN74LVC1G18DBVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | <h3>SN74LVC138ADR Overview</h3><div><br/>In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 1.65V~3.6V, designers have superior flexibility.As a member of 74LVC series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74LVC138 may also be used.The multiplexer is supplied with 1.8V voltage.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.There are 8 bits in signal multiplexer.This turn signal switch has 8 outputs designed for its operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.It consumes 10μA current of multiplexer ic without external influences.There are 3 inputs provided in this multiplexer.The switches packaging is based on TR.Normally, the digitalswitch consists of 1 circuits.<br/><br/></div><h3>SN74LVC138ADR Features</h3><div><br/>Supplied in the 16-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Single<br/><br/></div><h3>SN74LVC138ADR Applications</h3><div><br/>There are a lot of Texas Instruments SN74LVC138ADR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>High-performance memory systems<!--<li--></li><li>Speed control of medern motors<!--<li--></li><li>Memory chips<!--<li--></li><li>Audio transmission <!--<li--></li><li>High-performance memory-decoding applications<!--<li--></li><li>Microprocessor memory systems<!--<li--></li><li>Used to connect a single source to multiple destinations<!--<li--></li><li>Solenoid cooling fan<!--<li--></li><li>Electronic circuits<!--<li--></li><li>Automatic Monitoring systems<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC1G19DCKR OverviewIt is included in the 6-TSSOP, SC-88, SOT-363 in order to save board space.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 1.65V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74LVC series can be used for a wide range of applications.Among its basic features are 6 terminations.The part number for 74LVC1G19 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemIn this turn signal switch, there are 6 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.With 6 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.There are 1 bits signal multiplexer provides.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.It is provided that 3.3V has a power supply in order to function normally.Decoder/Drivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 10μA current of multiplexer ic.This multiplexer has 1 inputs.The switches is packaged according to the way of TR.As the signal source, there are 2 output lines.To ensure that the digitalswitch performs properly, 1 circuits are formed. SN74LVC1G19DCKR FeaturesSupplied in the 6-TSSOP, SC-88, SOT-363 package Adopting a supply type of Single Power supplies of 3.3V 2 output lines SN74LVC1G19DCKR ApplicationsThere are a lot of Texas Instruments SN74LVC1G19DCKR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC157APWR OverviewDigital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Cut Tape (CT) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Multiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74LVC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The part number for 74LVC157 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemThere are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.There are 16 pins on it.This unit is mounted in the way of Surface Mount.Among the family of LVC/LCX/Z the logic switch is a member.There are 2 bits signal multiplexer provides.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In order for 3.3V to operate normally, a power supply is provided.The turn signal switch has 1 outputs designed for operation.This multiplexer has a total of 8 inputs.According to TR, the switches is packaged.A total of 4 transmission channels are available in the turn signal switch's circuit. SN74LVC157APWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC157APWR ApplicationsThere are a lot of Texas Instruments SN74LVC157APWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC148DR OverviewProviding this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Priority Encoder as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74HC series, which provide extensive application potential.There is a design for terminating 16 as part of its basic configuration.As its base part number is 74HC148, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemSignal switch has 16 component pins.A conductor terminates at GULL WING.Single is used as its supply type.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of HC/UH.In this signal multiplexer, there are 8 bits provided.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.In order for 2/6V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Arithmetic Circuits.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is provided with 8 inputs.TR is used to package the switches.Signal sources consist of output lines of 3.The digitalswitch relies on 1 circuits to function normally. SN74HC148DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V 3 output lines SN74HC148DR ApplicationsThere are a lot of Texas Instruments SN74HC148DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | <h3>SN74HC138DR Overview</h3><div><br/>Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.Since they are members of the 74HC series, they can be used in a wide variety of applications.There are 16 terminations included in its basic configuration.The part number for 74HC138 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.In this signal multiplexer, there are 8 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.For mux switch's normal operation, power supply 2/6V is provided.In order for the turn signal switch to work, there are 8 outputs.Decoder/Drivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 8μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.This multiplexer has 3 inputs.The switches package is packaged in accordance with TR.In order for the digitalswitch to function normally, it has 1 circuits.<br/><br/></div><h3>SN74HC138DR Features</h3><div><br/>Supplied in the 16-SOIC (0.154, 3.90mm Width) package<br/>Adopting a supply type of Single<br/>Power supplies of 2/6V<br/>Operating with the supply voltage of 5V<br/><br/></div><h3>SN74HC138DR Applications</h3><div><br/>There are a lot of Texas Instruments SN74HC138DR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Frequency multiplexing system<!--<li--></li><li>Microprocessor input/output systems<!--<li--></li><li>Implementing boolean functions with multiple variables<!--<li--></li><li>Small scale TV wall<!--<li--></li><li>Medical industry<!--<li--></li><li>Night vision cameras<!--<li--></li><li>Microprocessor memory systems<!--<li--></li><li>Steel plants<!--<li--></li><li>HD surveillance system<!--<li--></li><li>HDMI applications<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHCT138PWR OverviewDigital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.Its basic configuration includes terminations in the 16 range.The part number for 74AHCT138 can be used to find its logic switch related parts as well.The multiplexer's system works with 5V voltage.This turn signal switch consists of 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.The board has 16 pins configured.Surface Mount is the way it is mounted.The logic switch is a member of the AHCT/VHCT/VT family.As a result, signal multiplexer provides a total of 8 bits.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 8 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 4μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This multiplexer is equipped with 3 inputs and 3 outputs.According to TR, the switches is packaged.Normally, the digitalswitch consists of 1 circuits. SN74AHCT138PWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74AHCT138PWR ApplicationsThere are a lot of Texas Instruments SN74AHCT138PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HCT138DR OverviewThis is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in accordance with Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74HCT series, the multiplexers can be used for a wide range of applications.Among its basic features are 16 terminations.There is a base part number 74HCT138 that can be used to locate signal switch's related components as well.In multiplexer's system, 5V is the voltage supplied.A component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.A configuration of 16 pins is used.It is positioned in the direction of Surface Mount.Among the family of HCT the logic switch is a member.The multiplexer ic provides 8 bits.There is a power supply provided for the mux switch's normal operation of 5V.There are 8 outputs designed for the operation of the turn signal switch.This is an the digital switch ic that is classified as Decoder/Drivers.It consumes 80μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The multiplexer is equipped with 3 inputs.The signal switching is packaged by TR. For the normal operation of the device, 1 circuits must be formed. SN74HCT138DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT138DR ApplicationsThere are a lot of Texas Instruments SN74HCT138DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV138APWR OverviewDue to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74LV series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 74LV138.The multiplexer's system is supplied with a voltage of 2.5V.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.Signal multiplexer consists of 8 bits.Vsup should be kept at 2V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 20μA current of multiplexer ic without external influences.A multiplexer such as this has 3 inputs available.TR is used to package the switches.To operate the digitalswitch normally, 1 circuits are formed. SN74LV138APWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74LV138APWR ApplicationsThere are a lot of Texas Instruments SN74LV138APWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV138ADR OverviewAs a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74LV series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74LV138, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 2.5V volts.This turn signal switch has a total of 16 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.The mounting is in the way of Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.In this signal multiplexer, there are 8 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.The turn signal switch has 8 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Despite not interacting with external factors, it consumes 20μA current of multiplexer ic.This multiplexer has a total of 3 inputs.The switches package is packaged in accordance with TR.It is necessary for the digitalswitch to operate normally that 1 circuits be formed. SN74LV138ADR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single SN74LV138ADR ApplicationsThere are a lot of Texas Instruments SN74LV138ADR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC153DR OverviewDue to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Multiplexers from the 74HC series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.As its base part number is 74HC153, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.As a result, conductors end at GULL WING.There is a type of supply of Single.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.The multiplexer ic provides 4 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch has 1 outputs designed for operation.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer has a total of 8 inputs.The signal switching is packaged by TR. This turn signal switch's circuit uses 2 transmission channels. SN74HC153DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74HC153DR ApplicationsThere are a lot of Texas Instruments SN74HC153DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
