Force Sensors(6640)

Part	Manufacturer	Description		Stock	Action
815-SN74CBT16390DGVR	Ultralife	SN74CBT16390DGVR Overview Due to the lack of space on the board, digital switch is provided in the 56-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 56 terminations as part of its basic configuration.The base part number is 74CBT16390, so you can find its logic switch related parts using that number.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 56 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.This multiplexer ic has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 16 bits.In order for 5V to operate normally, a power supply is provided.There are 2 outputs designed for the operation of the turn signal switch.This is an the digital switch ic that is classified as Other Logic ICs.Without external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A multiplexer such as this has 32 inputs available.The switches packaging is based on TR.7Ohm is the resistance at which it operates. SN74CBT16390DGVR Features Supplied in the 56-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT16390DGVR Applications There are a lot of Texas Instruments SN74CBT16390DGVR Signal Switches / Multiplexers / Decoders applications. Medium scale TV wall Night vision cameras VGA Seven segment displays Combinational circuit Logic gates for other digital devices Automatic Monitoring systems Decimal decoder Injectors Microprocessor instruction decoding	PDF	999 In-stock	Get Quote
815-SN74CBT16390DGGR	Ultralife	SN74CBT16390DGGR Overview Digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There are 56 terminations included in its basic configuration.In addition, it also has a base part number of 74CBT16390, which can be used to find related parts.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 56 components that can be connected to each pin.A conductor terminates at GULL WING.Single is used as its supply type.A total of 56 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.The multiplexer ic provides 16 bits.A power supply is provided for mux switch's normal operation of 5V.The turn signal switch has 2 outputs designed for operation.The digital switch ic is a part of an electronic system classified as Other Logic ICs.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer provides 32 inputs.The signal switching is packaged by TR. The system operates with a resistance of 7Ohm. SN74CBT16390DGGR Features Supplied in the 56-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT16390DGGR Applications There are a lot of Texas Instruments SN74CBT16390DGGR Signal Switches / Multiplexers / Decoders applications. To select different devices in microprocessor input Analog to digital conversion Telephone network Implementing boolean functions with multiple variables Data distribution Speed synchronization of multiple motors in industries Speed control of medern motors Night vision cameras Audio transmission GLAN	PDF	999 In-stock	Get Quote
536-SY58017UMG-TR	APS	SY58017UMG-TR Overview Digital switch is provided in the 16-VFQFN Exposed Pad, 16-MLF? for the purpose of saving board space.Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2.375V~2.625V 3V~3.6V voltage.In addition to being a member of the Precision Edge? series, these multiplexers have a wide range of applications.Its logic switch base part number is 58017 which can also be used to find its logic switch related parts.In this case, Single is employed as the supply type.A total of 16 pins are configured on this board.The mount is in Surface Mount.As part of the operation of this turn signal switch, there are 1 outputs.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.375V. SY58017UMG-TR Features Supplied in the 16-VFQFN Exposed Pad, 16-MLF? package Adopting a supply type of Single SY58017UMG-TR Applications There are a lot of Microchip Technology SY58017UMG-TR Signal Switches / Multiplexers / Decoders applications. Data distribution HDMI applications Data communication Medical industry Speed control of medern motors Make full adder To select different task for memory in microprocessor memory systems LVDS A/D converters Combinational circuit	PDF	999 In-stock	Get Quote
815-SN74CBTS16211DGGR	Ultralife	SN74CBTS16211DGGR Overview This is a relatively small item of digital switch that is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save space on the board.It is packaged according to the Cut Tape (CT) method.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74CBTS series.Among its basic configurations are 56 terminations.As its base part number is 74CBTS16211, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch consists of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.The board has 56 pins configured.The mount is in Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 24 bits that are provided.Keeping Vsup at 4V will prevent some unwanted failures.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility. SN74CBTS16211DGGR Features Supplied in the 56-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTS16211DGGR Applications There are a lot of Texas Instruments SN74CBTS16211DGGR Signal Switches / Multiplexers / Decoders applications. GLAN High-performance memory-decoding applications Memory system of computers Computer memory Video transmission Data distribution Encrypted communications system A robotic vehicle with the metal detector Audio transmission VGA	PDF	999 In-stock	Get Quote
815-TUSB564IRNQT	Ultralife	TUSB564IRNQT Overview For the purpose of saving board space, digital switch is included in the 40-WFQFN Exposed Pad.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Crosspoint Switch is used.The operating temperature of -40°C~85°C TA will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 3V~3.6V voltage.As part of its basic configuration, 40 terminations are designed as a part of it.The base part number is TUSB564, so you can find its logic switch related parts using that number.NO LEAD represents the end of conductors.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V. TUSB564IRNQT Features Supplied in the 40-WFQFN Exposed Pad package TUSB564IRNQT Applications There are a lot of Texas Instruments TUSB564IRNQT Signal Switches / Multiplexers / Decoders applications. Data bus control Enabling block of memory depending on address in memory chips Enabling different functions units in microprocessor instruction decoding War field flying robot with a night vision flying camera Code converters Data communication VGA Used to connect a single source to multiple destinations Textile mills Make full adder	PDF	999 In-stock	Get Quote
815-SN74CBTD16211DGGR	Ultralife	SN74CBTD16211DGGR Overview It is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBTD series can be used in a wide range of applications.There is a design for terminating 56 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTD16211.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.Currently, it is configured with a 56 pin configuration.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides 24 bits.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 1.5mA current.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.This signal switching operates at a resistance of 2.This signal switching operates at a resistance of 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current. SN74CBTD16211DGGR Features Supplied in the 56-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD16211DGGR Applications There are a lot of Texas Instruments SN74CBTD16211DGGR Signal Switches / Multiplexers / Decoders applications. To select different devices in microprocessor input Audio transmission Microprocessor memory systems Analog, digital or video signal switching Solenoid cooling fan High-performance memory systems Data bus control High-performance memory-decoding applications Microprocessor input/output systems Medium scale TV wall	PDF	999 In-stock	Get Quote
815-SN65LVCP23D	Ultralife	SN65LVCP23D Overview In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tube.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Crosspoint Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.Several applications are possible for 65LVCP series multiplexers.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 65LVCP23 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.It is configured with 16 pins.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Multiplexer or Switches.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.In the turn signal switch's circuit, there are 2 channels used for transmission. SN65LVCP23D Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN65LVCP23D Applications There are a lot of Texas Instruments SN65LVCP23D Signal Switches / Multiplexers / Decoders applications. Frequency multiplexing system Data communication Solenoid cooling fan Recording transmission Memory chips Idle motor Signal router Video transmission Arithmetic Logic Units Electronic circuits	PDF	999 In-stock	Get Quote
815-SN74AHC138DGVR	Ultralife	SN74AHC138DGVR Overview In order to save board space, digital switch is located in the 16-TFSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.The multiplexers from 74AHC series can be used for a wide range of applications.The basic configuration of this system includes 16 terminations.As its base part number is 74AHC138, logic switch can also be used to find its related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.A configuration of 16 pins is used.The mount is in Surface Mount.The logic switch object belongs to the family of AHC/VHC/H/U/V.As a result, signal multiplexer provides 8 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.During mux switch's normal operation, 2/5.5V is provided with a power supply.For the turn signal switch's operation, there are 8 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.It consumes 4μA current of multiplexer ic without external influences.This multiplexer is equipped with 3 inputs and 3 outputs.A TR packaging method is used in the switches.The mux switch configuration contains 1 elements. SN74AHC138DGVR Features Supplied in the 16-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2/5.5V SN74AHC138DGVR Applications There are a lot of Texas Instruments SN74AHC138DGVR Signal Switches / Multiplexers / Decoders applications. Memory system of computers To select different devices in microprocessor input Encrypted communications system Make half adder Data collection system Implementing boolean functions with multiple variables High-performance memory systems Image transmission A robotic vehicle with the metal detector CPU memory location identification	PDF	999 In-stock	Get Quote
815-SN74LVC139ADR	Ultralife	SN74LVC139ADR Overview This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 1.65V~3.6V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74LVC series, these multiplexers have a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.In addition, it also has a base part number of 74LVC139, which can be used to find related parts.The turn signal switch is supplied with a voltage of 1.8V volts.In this turn signal switch, there are 16 components that can be connected to each pin.Conductors terminate at GULL WING in this design.There is a type of supply of Single.Currently, it is configured with 16 pins.This unit is mounted in the way of Surface Mount.The LVC/LCX/Z family includes the logic switch.In this signal multiplexer, there are 4 bits provided.The minimal supply voltage (Vsup) should be kept at 1.65V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.In order for 3.3V to operate normally, a power supply is provided.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is an electronic part classified into Decoder/Drivers.There are no external influences on this multiplexer ic, so it consumes 10μA current.The switches packaging is based on TR.The mux switch configuration contains 2 elements. SN74LVC139ADR Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC139ADR Applications There are a lot of Texas Instruments SN74LVC139ADR Signal Switches / Multiplexers / Decoders applications. Automatic health monitoring systems Memory system of computers Enabling different functions units in microprocessor instruction decoding Encrypted communications system A/D converters To select different task for memory in microprocessor memory systems Microprocessor memory systems War field flying robot with a night vision flying camera Make half adder Relay	PDF	999 In-stock	Get Quote
815-SN74LV138ARGYR	Ultralife	SN74LV138ARGYR Overview In order to save board space, digital switch is located in the 16-VFQFN Exposed Pad.The package is in the form of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.Multiplexers in the 74LV series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74LV138, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 16 component pins.The supply type of this multiplexer ic is Single.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.As a result, signal multiplexer provides a total of 8 bits.Keep Vsup at 2V to avoid unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There are 8 outputs designed for the operation of the turn signal switch.Decoder/Drivers is the classification for this the digital switch ic.It consumes 20μA current of multiplexer ic since it is not affected by external factors.This multiplexer is equipped with 3 inputs and 3 outputs.The switches package is packaged in accordance with the TR method.For the normal operation of the device, 1 circuits must be formed. SN74LV138ARGYR Features Supplied in the 16-VFQFN Exposed Pad package Adopting a supply type of Single SN74LV138ARGYR Applications There are a lot of Texas Instruments SN74LV138ARGYR Signal Switches / Multiplexers / Decoders applications. Implementing boolean functions with multiple variables Robotic vehicles Metal detectors Microprocessor memory systems War field flying robot with a night vision flying camera Automatic Monitoring systems Encrypted communications system CNC machines Data-routing applications PCIe	PDF	999 In-stock	Get Quote
815-SN74LV139ADBR	Ultralife	SN74LV139ADBR Overview For the purpose of saving board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).As a result, it is packaged in the way of Cut Tape (CT).Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74LV series, which provide extensive application potential.Among its basic features are 16 terminations.The base part number is 74LV139, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Single.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.Among the family of LV/LV-A/LVX/H the logic switch is a member.Signal multiplexer provides 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.It is provided that 3.3V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 4 outputs.This is an the digital switch ic that is classified as Decoder/Drivers.In the absence of external influences, it consumes 20μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.To ensure that the digitalswitch performs properly, 2 circuits are formed. SN74LV139ADBR Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LV139ADBR Applications There are a lot of Texas Instruments SN74LV139ADBR Signal Switches / Multiplexers / Decoders applications. Steel plants Analog to digital conversion Data collection system Image transmission Speed synchronization of multiple motors in industries Data demultiplexing Automatic Monitoring systems Microprocessor memory systems Paper plants LVDS	PDF	999 In-stock	Get Quote
815-SN74AHC157DGVR	Ultralife	SN74AHC157DGVR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 16-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74AHC series can be used in a wide range of applications.The basic configuration includes 16 terminations.You can also find related parts by using its logic switch base part number of 74AHC157.The multiplexer's system is powered by 3.3V volts.This turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.The logic switch is a member of the family of AHC/VHC/H/U/V.As a result, signal multiplexer provides a total of 2 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch contains 1 outputs designed to operate.The multiplexer is equipped with 8 inputs.The switches package is packaged in accordance with the TR method.In the turn signal switch's circuit, there are 4 channels used for transmission. SN74AHC157DGVR Features Supplied in the 16-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74AHC157DGVR Applications There are a lot of Texas Instruments SN74AHC157DGVR Signal Switches / Multiplexers / Decoders applications. HD surveillance system Communication system War field flying robot with a night vision flying camera Arithmetic Logic Units Audio transmission Data demultiplexing Recording transmission To select different task for memory in microprocessor memory systems Microprocessor input/output systems To select different devices in microprocessor output	PDF	999 In-stock	Get Quote
815-SN74HC42DR	Ultralife	SN74HC42DR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.Decoder is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.The multiplexers from 74HC series can be used for a wide range of applications.Among its basic features are 16 terminations.As its base part number is 74HC42, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.As a result, conductors end at GULL WING.This supply type employs Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.In this signal multiplexer, there are 10 bits provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.For mux switch's normal operation, power supply 2/6V is provided.For the turn signal switch's operation, there are 10 outputs.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.There are 4 inputs provided in this multiplexer.The switches package is packaged in a way which is consistent with TR.During normal operation, the digitalswitch consists of 1 circuits. SN74HC42DR Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC42DR Applications There are a lot of Texas Instruments SN74HC42DR Signal Switches / Multiplexers / Decoders applications. Idle motor Speed synchronization of multiple motors in industries GLAN Relay War field flying robot with a night vision flying camera Image transmission Frequency multiplexing system CPU memory location identification CNC machines Microprocessor input/output systems	PDF	999 In-stock	Get Quote
815-CD4532BPWR	Ultralife	CD4532BPWR Overview This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Cut Tape (CT) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Priority Encoder is used as the analog component of the multiplexers.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 16 terminations.The base part number is CD4532, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Dual, which is used as the source of power.The board has 16 pins configured.The mount is in Surface Mount.As a result, signal multiplexer provides a total of 8 bits.Keeping Vsup at 3V will prevent some unwanted failures.In order for the turn signal switch to work, there are 3 outputs.Part number Arithmetic Circuits indicates that the digital switch ic is an electronic part.The switches is packaged according to the way of TR.Voltage levels are accepted through 10 input lines of multiplexers.There are 4 output lines on the signal source.For the normal operation of the device, 1 circuits must be formed. CD4532BPWR Features Supplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Dual 10 input lines 4 output lines CD4532BPWR Applications There are a lot of Texas Instruments CD4532BPWR Signal Switches / Multiplexers / Decoders applications. Home automation system To select different devices in microprocessor output Frequency multiplexing system Data bus control Electronically controlled engine system Memory chips PCIe Injectors Combinational circuit Image transmission	PDF	999 In-stock	Get Quote
815-SN74LV138ATRGYR	Ultralife	SN74LV138ATRGYR Overview Due to the fact that it is provided in the 16-VFQFN Exposed Pad, digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 2V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74LV series, these multiplexers have a wide range of applications.There are 16 terminations included in its basic configuration.As its base part number is 74LV138, logic switch can also be used to find its related parts.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.The supply type of this multiplexer ic is Single.The board has 16 pins configured.It is positioned in the direction of Surface Mount.Among the family of LV/LV-A/LVX/H the logic switch is a member.In the signal multiplexer, there are 8 bits available.In order for 5V to operate normally, a power supply is provided.As part of the operation of this turn signal switch, there are 8 outputs.This is an the digital switch ic that is classified as Decoder/Drivers.There are no external influences on this multiplexer ic, so it consumes 2μA current.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The multiplexer is equipped with 3 inputs.The switches is packaged according to the way of TR.1 circuits are formed for the normal operation of the digitalswitch. SN74LV138ATRGYR Features Supplied in the 16-VFQFN Exposed Pad package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LV138ATRGYR Applications There are a lot of Texas Instruments SN74LV138ATRGYR Signal Switches / Multiplexers / Decoders applications. Enabling block of memory depending on address in memory chips Memory chips Injectors Home automation system Microprocessor input/output systems Microprocessor instruction decoding Make half adder Logic circuits Computer memory Code converters	PDF	999 In-stock	Get Quote
815-CD4016BNSR	Ultralife	CD4016BNSR Overview In order to conserve board space, digital switch is included in the 14-SOIC (0.209, 5.30mm Width).The package is packaged in the manner of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Bilateral, FET Switches.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.Multiplexers of the 4000B series can be used in a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.The base part number is CD4016, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 10V is supplied.A component pin count of 14 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Dual, Single that is employed in this case.This multiplexer ic has 14 pins configured.Surface Mount is the way it is mounted.There are 1 bits in signal multiplexer.This is a signal switch that is categorized as Multiplexer or Switches.Despite not interacting with external factors, it consumes 20nA current of multiplexer ic.There are 4 inputs provided in this multiplexer.This signal switching operates at a resistance of 400Ohm.The turn signal switch's circuit has 4 transmission channels. CD4016BNSR Features Supplied in the 14-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Dual, Single CD4016BNSR Applications There are a lot of Texas Instruments CD4016BNSR Signal Switches / Multiplexers / Decoders applications. Transmission from the computer system of a satellite Code conversion A robotic vehicle with the metal detector Used to connect a single source to multiple destinations Make half adder A/D converters LVDS Paper plants GLAN Speed control of medern motors	PDF	999 In-stock	Get Quote
815-SN74HCT139DR	Ultralife	SN74HCT139DR Overview For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers in the 74HCT series are suitable for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.In addition, it also has a base part number of 74HCT139, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 16 component pins.GULL WING represents the end of conductors.This supply type employs Single.With 16 pins, it is configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the HCT family.The multiplexer ic provides 4 bits.During mux switch's normal operation, 5V is provided with a power supply.The turn signal switch has 4 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.TR is used to package the switches.It contains 2 elements in mux switch configuration. SN74HCT139DR Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT139DR Applications There are a lot of Texas Instruments SN74HCT139DR Signal Switches / Multiplexers / Decoders applications. Home automation system Make full adder Analog, digital or video signal switching D/A converters Electronically controlled engine system RF-based home automation system Recording transmission Combinational circuit Implementing boolean functions with multiple variables Microprocessor instruction decoding	PDF	999 In-stock	Get Quote
815-SN74AHCT138DBR	Ultralife	SN74AHCT138DBR Overview It is included in the 16-SSOP (0.209, 5.30mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.With the 74AHCT series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 16 terminations.The base part number is 74AHCT138, so you can find its logic switch related parts using that number.The multiplexer is supplied with 5V voltage.There are 16 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the AHCT/VHCT/VT family.In this signal multiplexer, there are 8 bits that are provided.Normally, 5V is powered by a battery.As a result, the turn signal switch consists of 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without any external influences, it consumes 4μA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The multiplexer provides 3 inputs.The switches package is packaged in accordance with the TR method.To operate the digitalswitch normally, 1 circuits are formed. SN74AHCT138DBR Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74AHCT138DBR Applications There are a lot of Texas Instruments SN74AHCT138DBR Signal Switches / Multiplexers / Decoders applications. Electronics industry D/A converters Medical industry CNC machines Transmission from the computer system of a satellite To select different task for memory in microprocessor memory systems Enabling different functions units in microprocessor instruction decoding Used to connect a single source to multiple destinations Time division multiplexing system Electronic circuits	PDF	999 In-stock	Get Quote
815-SN74AHCT157DBR	Ultralife	SN74AHCT157DBR Overview Providing this information in the 16-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.It is packaged according to the Cut Tape (CT) method.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Multiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74AHCT series.There are 16 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74AHCT157.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AHCT/VHCT/VT the logic switch is a member.Signal multiplexer consists of 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch contains 1 outputs designed to operate.It is provided with 8 inputs.According to TR, the switches is packaged.This turn signal switch's circuit is based on a circuit with 4 channels. SN74AHCT157DBR Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V SN74AHCT157DBR Applications There are a lot of Texas Instruments SN74AHCT157DBR Signal Switches / Multiplexers / Decoders applications. Idle motor Time division multiplexing system Arithmetic Logic Units Image transmission Data communication High-performance memory systems Night vision cameras Data collection system Data-routing applications LVDS	PDF	999 In-stock	Get Quote
815-SN74LVC139ADBR	Ultralife	SN74LVC139ADBR Overview Due to the fact that it is provided in the 16-SSOP (0.209, 5.30mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 1.65V~3.6V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74LVC series multiplexers.There is a design for terminating 16 as part of its basic configuration.The part number for 74LVC139 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 1.8V voltage.A component pin count of 16 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.The board is configured with 16 pins.The mount is in Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.There are 4 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 1.65V to avoid some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.The turn signal switch has 4 outputs.In electronic terms, the digital switch ic is classified as Decoder/Drivers.No external influence consumes 10μA current of multiplexer ic.The switches is packaged according to the way of TR.It is necessary for the digitalswitch to operate normally that 2 circuits be formed. SN74LVC139ADBR Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC139ADBR Applications There are a lot of Texas Instruments SN74LVC139ADBR Signal Switches / Multiplexers / Decoders applications. Data bus control Enabling block of memory depending on address in memory chips Automation system Textile mills Recording transmission Speed synchronization of multiple motors in industries War field flying robot with a night vision flying camera Make full adder VGA GLAN	PDF	999 In-stock	Get Quote
568-PCA8550DB,118	MG Chemicals	PCA8550DB,118 Overview In order to conserve board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When operated with a 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 8550.The multiplexer's system is powered by 3.3V volts.This turn signal switch consists of 16 component pins.As a result, GULL WING represents the end of the conductors.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.The turn signal switch has 1 outputs designed for operation.It is provided with 4 inputs. PCA8550DB,118 Features Supplied in the 16-SSOP (0.209, 5.30mm Width) package PCA8550DB,118 Applications There are a lot of NXP USA Inc. PCA8550DB,118 Signal Switches / Multiplexers / Decoders applications. HD surveillance system Small scale TV wall CPU memory location identification Steel plants Logic circuits Decimal decoder A/D converters Control unit of Central Processing unit (CPU) Microprocessor memory systems Idle motor	PDF	999 In-stock	Get Quote
815-SN74CBT3384APWR	Ultralife	SN74CBT3384APWR Overview As a means of saving space, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74CBT series are suitable for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.There is a base part number of 74CBT3384 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.This turn signal switch consists of 24 component pins.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 24 pin configuration.Surface Mount is the way it is mounted.The logic switch object belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits provided.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches is packaged according to the way of TR.A resistance of 2 governs its operation.In terms of resistance, it has a value of 7Ohm.The output current of 64mA is provided for higher switches' flexibility. SN74CBT3384APWR Features Supplied in the 24-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3384APWR Applications There are a lot of Texas Instruments SN74CBT3384APWR Signal Switches / Multiplexers / Decoders applications. Data collection system Steel plants CPU memory location identification Seven segment displays Small scale TV wall Night vision cameras Idle motor HD surveillance system Used to connect a single source to multiple destinations Home automation system	PDF	999 In-stock	Get Quote
815-CD74HC138M96	Ultralife	CD74HC138M96 Overview It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.The package is in the form of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74HC138, which can also be used to find its logic switch related parts.The multiplexer's system works with 4.5V voltage.This turn signal switch contains 16 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.This multiplexer ic has 16 pins configured.It is positioned in the direction of Surface Mount.The logic switch is a member of the HC/UH family.As a result, signal multiplexer provides a total of 8 bits.Keep Vsup at 2V to avoid unnecessary failures.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.The power supply of 2/6V is provided for mux switch's normal operation.For the turn signal switch's operation, there are 8 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.This multiplexer has a total of 3 inputs.According to TR, the switches is packaged.Normally, the digitalswitch consists of 1 circuits. CD74HC138M96 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V CD74HC138M96 Applications There are a lot of Texas Instruments CD74HC138M96 Signal Switches / Multiplexers / Decoders applications. Microprocessor instruction decoding Communication system Home automation system Memory system of computers Computer memory A robotic vehicle with the metal detector RF-based home automation system To select different devices in microprocessor input Electronic circuits Control unit of Central Processing unit (CPU)	PDF	999 In-stock	Get Quote
815-SN74AUC1G19DCKR	Ultralife	SN74AUC1G19DCKR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 6-TSSOP, SC-88, SOT-363.It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 0.8V~2.7V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74AUC series, they can be used in a wide variety of applications.Among its basic features are 6 terminations.You can also find related parts by using its logic switch base part number of 74AUC1G19.The multiplexer is supplied with 1.1V voltage.This turn signal switch consists of 6 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.A total of 6 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the AUC family.There are 1 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 0.8V to avoid some unnecessary failures.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 10μA current of multiplexer ic.This multiplexer has a total of 1 inputs.The signal switching is packaged by TR. A signal source has 2 output lines.For the normal operation of the device, 1 circuits must be formed. SN74AUC1G19DCKR Features Supplied in the 6-TSSOP, SC-88, SOT-363 package Adopting a supply type of Single 2 output lines SN74AUC1G19DCKR Applications There are a lot of Texas Instruments SN74AUC1G19DCKR Signal Switches / Multiplexers / Decoders applications. Combinational circuit War field flying robot with a night vision flying camera Memory system of computers To select different devices in microprocessor input Robotic vehicles Injectors Textile mills Enabling block of memory depending on address in memory chips Data distribution CPU memory location identification	PDF	999 In-stock	Get Quote
815-SN74F153NSR	Ultralife	SN74F153NSR Overview As a means of saving space, digital switch is provided in the 16-SOIC (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74F series are suitable for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.As its base part number is 74F153, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 16 pins.Surface Mount is the way it is mounted.The F/FAST family includes the logic switch.Signal multiplexer contains 1 bits.A power supply is provided for mux switch's normal operation of 5V.This turn signal switch has 1 outputs designed for its operation.It consumes 12mA current of multiplexer ic without external influences.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The multiplexer provides 8 inputs.TR is used to package the switches.For the purpose of accepting voltage levels, the multiplexers have 4 input lines.The turn signal switch's circuit consists of 2 transmission channels. SN74F153NSR Features Supplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V 4 input lines SN74F153NSR Applications There are a lot of Texas Instruments SN74F153NSR Signal Switches / Multiplexers / Decoders applications. Textile mills Memory system of computers Data bus control GLAN Transmission from the computer system of a satellite Electronic circuits War field flying robot with a night vision flying camera D/A converters Encrypted communications system Signal router	PDF	999 In-stock	Get Quote
815-SN74HC151QDRQ1	Ultralife	SN74HC151QDRQ1 Overview This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Multiplexers of the Automotive, AEC-Q100, 74HC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The part number for 74HC151 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.The board has 16 pins configured.Surface Mount is the way it is mounted.In the HC/UH family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.In order to maintain mux switch's normal operation, power is provided to 2/6V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.The switches packaging is based on TR. SN74HC151QDRQ1 Features Supplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V SN74HC151QDRQ1 Applications There are a lot of Texas Instruments SN74HC151QDRQ1 Signal Switches / Multiplexers / Decoders applications. Microprocessor input/output systems Paper plants Encrypted communications system HD surveillance system Analog to digital conversion Speed synchronization of multiple motors in industries Telephone network Enabling block of memory depending on address in memory chips Data bus control Small scale TV wall	PDF	999 In-stock	Get Quote
815-SN74CBT3384ADBQR	Ultralife	SN74CBT3384ADBQR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 24-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Among its basic features are 24 terminations.As its base part number is 74CBT3384, logic switch can also be used to find its related parts.For multiplexer's system, 5V voltage is supplied.This turn signal switch has a total of 24 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 24 pin configuration.The mounting is in the way of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 10 bits signal multiplexer provides.Vsup should be kept at 4V to prevent some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Not being affected by the external factors, consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches packaging is based on TR.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 7Ohm.For greater switches' flexibility, 64mA provides the output current. SN74CBT3384ADBQR Features Supplied in the 24-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3384ADBQR Applications There are a lot of Texas Instruments SN74CBT3384ADBQR Signal Switches / Multiplexers / Decoders applications. To select different devices in microprocessor input Make half adder Enabling block of memory depending on address in memory chips Medium scale TV wall Data distribution Electronic circuits War field flying robot with a night vision flying camera Memory system of computers Combinational circuit Communication system	PDF	999 In-stock	Get Quote
815-SN74CBT3384ADBR	Ultralife	SN74CBT3384ADBR Overview In order to save board space, digital switch is located in the 24-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers from 74CBT series can be used for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.To find signal switch's related components, a base part number of 74CBT3384 may also be used.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 24 components that can be connected to each pin.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 10 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.According to TR, the switches is packaged.The resistance of the signal switching is 2.A resistance of 7Ohm is used to operate the signal switching.For greater switches' flexibility, the output current of 64mA is provided. SN74CBT3384ADBR Features Supplied in the 24-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3384ADBR Applications There are a lot of Texas Instruments SN74CBT3384ADBR Signal Switches / Multiplexers / Decoders applications. Data demultiplexing Make half adder Electronically controlled engine system CNC machines Image transmission Logic gates for other digital devices Medical industry Code converters Automatic Monitoring systems Data transfer	PDF	999 In-stock	Get Quote
815-SN74CBTD3305CPWR	Ultralife	SN74CBTD3305CPWR Overview Providing this information in the 8-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.In addition to being a member of the 74CBTD series, these multiplexers have a wide range of applications.This configuration includes 8 terminations as part of its basic functionality.The base part number is 74CBTD3305, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 8 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.This supply type employs Single.This multiplexer ic is configured with 8 pins.The mount is in Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 1 bits.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without any external influences, it consumes 1.5mA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with the TR method.A resistance of 2 governs its operation.20Ohm is the resistance at which it operates.A total of 2 transmission channels are available in the turn signal switch's circuit.It is possible to provide a current output of 64mA for greater switches' flexibility. SN74CBTD3305CPWR Features Supplied in the 8-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3305CPWR Applications There are a lot of Texas Instruments SN74CBTD3305CPWR Signal Switches / Multiplexers / Decoders applications. Code converters Small scale TV wall LVDS Injectors PCIe Robotic vehicles Telephone network GLAN Data-routing applications Automatic Monitoring systems	PDF	999 In-stock	Get Quote
815-SN74CBT3125CPWR	Ultralife	SN74CBT3125CPWR Overview The reason it is provided is that the board space can be saved by placing digital switch in the 14-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Among its basic features are 14 terminations.There is a base part number 74CBT3125 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.Signal switch has 14 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.The board is configured with 14 pins.This unit is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In the signal multiplexer, there are 1 bits available.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is a category for the digital switch ics.Not being affected by the external factors, consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.A TR packaging method is used in the switches.The resistance is 2.This signal switching operates at a resistance of 12Ohm.The turn signal switch's circuit consists of 4 transmission channels.It is possible to provide a current output of 64mA for greater switches' flexibility. SN74CBT3125CPWR Features Supplied in the 14-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3125CPWR Applications There are a lot of Texas Instruments SN74CBT3125CPWR Signal Switches / Multiplexers / Decoders applications. Memory chips Data-routing applications Medical industry Automatic health monitoring systems To select different devices in microprocessor output Microprocessor input/output systems Data distribution Analog, digital or video signal switching Night vision cameras Control unit of Central Processing unit (CPU)	PDF	999 In-stock	Get Quote