Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartUltrasonic Receivers, Transmitters(5193)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments | SN74ALS573CDW OverviewIt is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the packaging method. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C. It is a type of FPGA belonging to the 74ALS series. There are 8 bits in this electronic part. A device with this design has 20 terminations. As a member of the 74ALS573 family, it falls under that category. A 5V voltage supply is required for operation. The device is equipped with 20 pins. It is a member of the ALS family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies attached to it. There are 9 input lines in which electronic circuits are present. The 24mA output current gives it maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. The current consumed by the device is 16mA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. SN74ALS573CDW Features20-SOIC (0.295, 7.50mm Width) package 74ALS series 8 Bits 74ALS573 family 20 pin count 20 pins 5V power supplies SN74ALS573CDW ApplicationsThere are a lot of Texas Instruments SN74ALS573CDW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4724BE OverviewIn the package 16-DIP (0.300, 7.62mm), it can be found. Tube is the way in which it is packaged. Standard is used for the output it is configured with. The Logic type of this electrical device is D-Type, Addressable. The way in which this electronic part is mounted is Through Hole. There is no supply voltage for this device. The operating temperature is -55°C~125°C. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. This device has been designed with 16 terminations available. As a member of the CD4724 family, it falls under that category. The supply voltage of the device is 5V. There are 16 pins attached to it. It is designed with 16 pins. It is mounted according to the Through Hole method. This part can be found within the FF/Latch subcategory. The supply voltage (Vsup) should be greater than 3V. It contains 1 input lines where electronic circuits are present. As the output current is 6.8mA, the design flexibility is maximum. Aquiescent current is consumed by 80nA without being affected by external forces. The circuit's superior flexibility is achieved through the use of 2 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA. CD4724BE Features16-DIP (0.300, 7.62mm) package 4000B series 8 Bits CD4724 family 16 pin count 16 pins CD4724BE ApplicationsThere are a lot of Texas Instruments CD4724BE Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALS573CN OverviewA package called 20-DIP (0.300, 7.62mm) contains it. It is packaged in the way of Tube. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. A temperature of 0°C~70°C is set as the operating temperature. In the 74ALS series, this FPGA is located. An electronic part with 8 bits is designed. This device is designed with 20 terminations. The family 74ALS573 includes it. It operates with a supply voltage of 5V. 20 pins are included. There is a device in this electronic family called ALS. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Through Hole method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. There are 3 input lines in which electronic circuits are present. The 24mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 16mA current from its quiescent state without being affected by external factors at all. The circuit's superior flexibility is achieved through the use of 8 circuits. SN74ALS573CN Features20-DIP (0.300, 7.62mm) package 74ALS series 8 Bits 74ALS573 family 20 pin count 20 pins 5V power supplies SN74ALS573CN ApplicationsThere are a lot of Texas Instruments SN74ALS573CN Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHCT573PW OverviewThe package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tube. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74AHCT series. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. The family in which it belongs to is 74AHCT573. It operates with a supply voltage of 5V. The 20 pind are equipped with it. In terms of electronic devices, this one is in the AHCT/VHCT/VT family. The device has 20 pins. This electronic part is mounted in the way of Surface Mount. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. A total of 5V power supplies are required for it to operate. There are electronic circuits attached to the 8 input lines. The output current of 8mA makes it feature maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA. SN74AHCT573PW Features20-TSSOP (0.173, 4.40mm Width) package 74AHCT series 8 Bits 74AHCT573 family 20 pin count 20 pins 5V power supplies SN74AHCT573PW ApplicationsThere are a lot of Texas Instruments SN74AHCT573PW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT533E Overview20-DIP (0.300, 7.62mm) contains it. Tube is the way it is packaged. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -55°C~125°C is set as the operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. A device with this design has 20 terminations. The family 74HCT533 includes it. It operates with a supply voltage of 5V. There are 20 pins on it. It is part of the family of electronic devices called HCT. In addition, it is designed with a pin number of 20. The electronic part is mounted in a way that corresponds to Through Hole. This device has a total of 2 ports. FF/Latches is the subcategory of this part. The system is powered by 5V sources. It features maximum flexibility in design due to 6mA output current. A high efficiency supply voltage should be maintained at 5V. It follows that 8 output lines are generated from the binary equivalent of the input line. It consumes 8μA of quiescent current without being affected by external factors. A total of 1 elements make up this object. CD74HCT533E Features20-DIP (0.300, 7.62mm) package 74HCT series 8 Bits 74HCT533 family 20 pin count 20 pins 5V power supplies 1 elements CD74HCT533E ApplicationsThere are a lot of Texas Instruments CD74HCT533E Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC533E OverviewA package called 20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. According to Through Hole, this electronic part is mounted. The voltage supply is 2V~6V. A temperature of -55°C~125°C is used for operation. 74HC is the series number of this FPGA. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. The family 74HC533 includes it. In order to operate it, the supply voltage must be 4.5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a HC/UH electronic device. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Through Hole method. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. 6V is the maximum supply voltage (Vsup). There are 2/6V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. With an output current of 7.8mA, it is highly flexible in terms of design. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by external factors. A total of 1 elements make up this object. CD74HC533E Features20-DIP (0.300, 7.62mm) package 74HC series 8 Bits 74HC533 family 20 pin count 20 pins 2/6V power supplies 1 elements CD74HC533E ApplicationsThere are a lot of Texas Instruments CD74HC533E Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALS996DW OverviewThere is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). A Tube package is used to package it. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. It is a type of FPGA belonging to the 74ALS series. This electronic part is designed with 8 Bits. The device consists of 24 terminations that are designed to be used in conjunction with it. It belongs to 74ALS996 family. The supply voltage of the device is 5V. 24 pins are available on it. There is a device in this electronic family called ALS. The device has 24 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. A total of 5V power supplies are needed to run it. The 24mA output current gives it maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 8 output lines. It consumes 55mA current from its quiescent state without being affected by external factors at all. It consists of 1 elements. There is also WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT characteristics to it. SN74ALS996DW Features24-SOIC (0.295, 7.50mm Width) package 74ALS series 8 Bits 74ALS996 family 24 pin count 24 pins 5V power supplies 1 elements SN74ALS996DW ApplicationsThere are a lot of Texas Instruments SN74ALS996DW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPIC6B259N Overview20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. It uses the output configuration DMOS. A D-Type, Addressable logic type is used in this electrical device. Mounting this electronic component follows the Through Hole method. A 4.5V~5.5V supply voltage is required to operate it. There is -40°C~125°C operating temperature. An FPGA in this series belongs to the TPIC family. An electronic part with 8 bits is designed. This device is designed with 20 terminations. The family TPIC6B259 includes it. It operates with a supply voltage of 5V. The 20 pind are equipped with it. There is a device in this electronic family called 6B. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Through Hole method. Its output current of 150mA ensures maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. In total, it has 1 elements. TPIC6B259N Features20-DIP (0.300, 7.62mm) package TPIC series 8 Bits TPIC6B259 family 20 pin count 20 pins 1 elements TPIC6B259N ApplicationsThere are a lot of Texas Instruments TPIC6B259N Latches applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | 74ALVCH16841DGG:11 OverviewIn the 56-TFSOP (0.240, 6.10mm Width) package, it is embedded. The package is in the form of Tube. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. A voltage of 2.3V~3.6V is used as the supply voltage for this device. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74ALVCH series. The design of this electronic part contains 10 bits. A device with this design has 56 terminations. As a member of the 74ALVCH16841 family, it falls under that category. In order to operate it, the supply voltage must be 3.3V. There are 56 pins on it. It belongs to the subcategory of FF/Latches. 3.3V power supplies are needed to operate it. 74ALVCH16841DGG:11 Features56-TFSOP (0.240, 6.10mm Width) package 74ALVCH series 10 Bits 74ALVCH16841 family 56 pin count 3.3V power supplies 74ALVCH16841DGG:11 ApplicationsThere are a lot of NXP USA Inc. 74ALVCH16841DGG:11 Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74HC259PWT OverviewIn the package 16-TSSOP (0.173, 4.40mm Width), it can be found. This package has the format of Tape & Reel (TR). In its configuration, Standard is used as the output. There is a logic type of D-Type, Addressable associated with this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 2V~6V. It is -40°C~85°C at the operating temperature. The 74HC series is associated with this FPGA. An electronic part with 8 bits is designed. This device has been designed with 16 terminations available. This type belongs to the 74HC259 family. The device works with a voltage of 5V for its supply voltage. 16 pins are provided. This electronic device belongs to the family of HC/UH. The pin configuration of the device is 16. Mounting this electronic component follows the Surface Mount method. Subcategory FF/Latches includes this part. It reaches 6V when the supply voltage (Vsup) reaches maximum. A total of 2/6V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. Considering the reliability of this device, it would be a good candidate for TR. Its 5.2mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consists of 1 elements. SN74HC259PWT Features16-TSSOP (0.173, 4.40mm Width) package 74HC series 8 Bits 74HC259 family 16 pin count 16 pins 2/6V power supplies 1 elements SN74HC259PWT ApplicationsThere are a lot of Texas Instruments SN74HC259PWT Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74ACT573M OverviewPackage 20-SOIC (0.295, 7.50mm Width) includes it. As a result, it has a packaging of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. The voltage supply is 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. The 74ACT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. 74ACT573 is the family name of it. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. It is a member of the ACT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. With an output current of 24mA, it is highly flexible in terms of design. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 3 output lines. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. The maximal power current (ICC) supplied for its operation reaches 0.04mA. CD74ACT573M Features20-SOIC (0.295, 7.50mm Width) package 74ACT series 8 Bits 74ACT573 family 20 pin count 20 pins 5V power supplies CD74ACT573M ApplicationsThere are a lot of Texas Instruments CD74ACT573M Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVTH573PW OverviewPackage 20-TSSOP (0.173, 4.40mm Width) includes it. It is packaged in the way of Tube. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 2.7V~3.6V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74LVTH family. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The family it belongs to is 74LVTH573. The device works with a voltage of 3.3V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the LVT family of electronic devices. With the design of the board, there are only 20 pins. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches contains this part. If the supply voltage (Vsup) is greater than 2.7V, then the device is working correctly. Electronic circuits are represented by 1 input lines. Due to its 64mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 3.3V. 3 output lines generate the binary equivalent of the input lines. It consumes 5mA current from its quiescent state without being affected by external factors at all. It achieves superior flexibility by using 8 circuits. SN74LVTH573PW Features20-TSSOP (0.173, 4.40mm Width) package 74LVTH series 8 Bits 74LVTH573 family 20 pin count 20 pins SN74LVTH573PW ApplicationsThere are a lot of Texas Instruments SN74LVTH573PW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV573ADGVR Overview20-TFSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tape & Reel (TR). There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. 74LV573 is the family name of it. With the supply voltage set at 2.5V, it is able to operate. The 20 pind are equipped with it. It is a member of the LV/LV-A/LVX/H family of electronic devices. 20 pins are used in its design. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. It operates from 3.3V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is suitable for TR. Its output current of 16mA ensures maximum design flexibility. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. As its maximal power current (ICC) reaches 0.02mA, it is able to operate. SN74LV573ADGVR Features20-TFSOP (0.173, 4.40mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 3.3V power supplies SN74LV573ADGVR ApplicationsThere are a lot of Texas Instruments SN74LV573ADGVR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | <h3>SN74HC373DBR Overview</h3><div><br/>In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. A Cut Tape (CT) package is used to package it. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74HC series. The design of this electronic part contains 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74HC373 is the family name of it. With the supply voltage set at 5V, it is able to operate. 20 pins are included. There is a device in this electronic family called HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. Subcategory FF/Latches contains this part. It reaches 6V when the supply voltage (Vsup) reaches maximum. It operates from 2/6V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. The output current of 7.8mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 8μA of quiescent current without being affected by external factors. <br/><br/></div><h3>SN74HC373DBR Features</h3><div><br/>20-SSOP (0.209, 5.30mm Width) package<br/>74HC series<br/>8 Bits<br/> 74HC373 family<br/> 20 pin count<br/> 20 pins<br/>2/6V power supplies<br/><br/></div><h3>SN74HC373DBR Applications</h3><div><br/>There are a lot of Texas Instruments SN74HC373DBR Latches applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Counter control<!--<li--></li><li>Phase comparator<!--<li--></li><li>Registers<!--<li--></li><li>Digital bus buffer<!--<li--></li><li>Control circuits<!--<li--></li><li>Automotive ADAS<!--<li--></li><li>Decade counting<!--<li--></li><li>Pattern Generators<!--<li--></li><li>Up-Down Johnson<!--<li--></li><li>Stacked or Push-Down Registers<!--<li--></li></ul> |
4000
In-stock
|
Get Quote | |||
| STMicroelectronics | M74HCT373RM13TR OverviewThere is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. There is -55°C~125°C operating temperature. An FPGA in this series belongs to the 74HCT family. It is designed with 8 bits. A device with this design has 20 terminations. M74HCT373 is its family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. This electronic device belongs to the family of HCT. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. M74HCT373RM13TR Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits M74HCT373 family 20 pin count 20 pins 5V power supplies M74HCT373RM13TR ApplicationsThere are a lot of STMicroelectronics M74HCT373RM13TR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ABT373DW OverviewIn the package 20-SOIC (0.295, 7.50mm Width), it can be found. It is packaged in the way of Tube. It is configured with an output of Tri-State. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ABT series. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74ABT373. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. This electronic device belongs to the family of ABT. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies attached to it. There are electronic circuits attached to the 8 input lines. Its 64mA output current allows for maximum design flexibility. High efficiency requires a voltage supply of 5V. The quiescent current consumed by it is 24mA because it is unaffected by external factors. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 30mA. SN74ABT373DW Features20-SOIC (0.295, 7.50mm Width) package 74ABT series 8 Bits 74ABT373 family 20 pin count 20 pins 5V power supplies SN74ABT373DW ApplicationsThere are a lot of Texas Instruments SN74ABT373DW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74F373DWR OverviewPackage 20-SOIC (0.295, 7.50mm Width) includes it. Cut Tape (CT) is the way it is packaged. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is used for operation. This FPGA is part of the 74F series. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. 74F373 is the family name of it. With a supply voltage of 5V, it operates. With 20 pins, it is equipped. It is a member of the F/FAST family of electronic devices. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. This device is well suited for TR based on its reliable performance. Its 24mA output current allows for maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. Aquiescent current is consumed by 38mA without being affected by external forces. A maximal power current (ICC) is generated for its operation at 55mA. SN74F373DWR Features20-SOIC (0.295, 7.50mm Width) package 74F series 8 Bits 74F373 family 20 pin count 20 pins 5V power supplies SN74F373DWR ApplicationsThere are a lot of Texas Instruments SN74F373DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT373E-NG Overview20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Through Hole is used to mount this electronic part. The supply voltage of the device is 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. An FPGA in this series belongs to the 74HCT family. The family it belongs to is 74HCT373. CD74HCT373E-NG Features20-DIP (0.300, 7.62mm) package 74HCT series 74HCT373 family CD74HCT373E-NG ApplicationsThere are a lot of Texas Instruments CD74HCT373E-NG Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ACT563DW OverviewIn the package 20-SOIC (0.295, 7.50mm Width), it can be found. A package of Tube has been used. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series is associated with this FPGA. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. The family it belongs to is 74ACT563. With the supply voltage set at 5V, it is able to operate. The device is equipped with 20 pins. This electronic device is categorized as a ACT electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. There are electronic circuits attached to the 3 input lines. With an output current of 24mA, it is highly flexible in terms of design. A high efficiency supply voltage should be maintained at 5V. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation. SN74ACT563DW Features20-SOIC (0.295, 7.50mm Width) package 74ACT series 8 Bits 74ACT563 family 20 pin count 20 pins 5V power supplies SN74ACT563DW ApplicationsThere are a lot of Texas Instruments SN74ACT563DW Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ABT16373ADLR OverviewIn the 48-BSSOP (0.295, 7.50mm Width) package, it is embedded. It is packaged in the way of Tape & Reel (TR). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74ABT series. The design of this electronic part contains 16 bits. This device has been designed with 48 terminations available. The family 74ABT16373 includes it. A 5V voltage supply is required for operation. 48 pins are included. It is a member of the ABT family of electronic devices. In addition, it is designed with a pin number of 48. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of Bus Driver/Transceiver. There are 5V power supplies attached to it. Based on its reliable performance, this device is well suited to TR. With 64mA, maximum design flexibility is ensured. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 3 output lines. It consumes 85mA of quiescent current without being affected by external factors. A total of 2 elements are contained in it. SN74ABT16373ADLR Features48-BSSOP (0.295, 7.50mm Width) package 74ABT series 16 Bits 74ABT16373 family 48 pin count 48 pins 5V power supplies 2 elements SN74ABT16373ADLR ApplicationsThere are a lot of Texas Instruments SN74ABT16373ADLR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74HC563DWR OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 2V~6V. A temperature of -40°C~85°C is used for operation. The 74HC series contains FPGAs of this type. It is designed with 8 bits. In this device, there are 20 terminations that have been designed. The family 74HC563 includes it. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. 6V is the maximum supply voltage (Vsup). The device is powered by 2/6V power supplies. A voltage greater than 2V must be supplied as a power supply (Vsup). Electronic circuits comprise 8 input lines. As a result of its reliable performance, it is well suited for TR. The output current of 7.8mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are also characteristics of BROADSIDE VERSION OF 533 associated with it. SN74HC563DWR Features20-SOIC (0.295, 7.50mm Width) package 74HC series 8 Bits 74HC563 family 20 pin count 20 pins 2/6V power supplies SN74HC563DWR ApplicationsThere are a lot of Texas Instruments SN74HC563DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74HC573NSR OverviewThe package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 2V~6V supply voltage is required to operate it. The 74HC series contains FPGAs of this type. There are 8 bits in this electronic part. 74HC573 is the family name of it. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. SN74HC573NSR Features20-SOIC (0.209, 5.30mm Width) package 74HC series 8 Bits 74HC573 family 20 pins SN74HC573NSR ApplicationsThere are a lot of Texas Instruments SN74HC573NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVC16373DGGR OverviewA package called 48-TFSOP (0.240, 6.10mm Width) contains it. Cut Tape (CT) is the packaging method. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 1.65V~3.6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74LVC series. The design of this electronic part is based on 16 bits. This device has 48 terminations. The family it belongs to is 74LVC16373. It operates with a supply voltage of 3.3V. There are 48 pins attached to it. In terms of electronic devices, this one is in the LVC/LCX/Z family. Designed with 48 pins, it is compatible with a wide range of devices. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. Based on its reliable performance, this device is well suited to TR. The 24mA output current gives it maximum design flexibility. High efficiency requires a supply voltage of 3.3V. There are 16 output lines that correspond to the binary equivalents of the input line. A total of 2 elements make up this object. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA. SN74LVC16373DGGR Features48-TFSOP (0.240, 6.10mm Width) package 74LVC series 16 Bits 74LVC16373 family 48 pin count 48 pins 2 elements SN74LVC16373DGGR ApplicationsThere are a lot of Texas Instruments SN74LVC16373DGGR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY74FCT573ATSOC OverviewA package called 20-SOIC (0.295, 7.50mm Width) contains it. It is packaged in the way of Tube. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 4.75V~5.25V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. The 74FCT series is associated with this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74FCT573. In order to operate it, the supply voltage must be 5V. It is equipped with 20 pin count. It is a member of the FCT family of electronic devices. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. Subcategory Bus Driver/Transceiver includes this part. There are 5V power supplies required for this machine to operate. An electronic circuit can be found on 8 input lines. Its output current of 64mA ensures maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. Without external influences, it consumes 100μA of quiescent current. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.2mA. CY74FCT573ATSOC Features20-SOIC (0.295, 7.50mm Width) package 74FCT series 8 Bits 74FCT573 family 20 pin count 20 pins 5V power supplies CY74FCT573ATSOC ApplicationsThere are a lot of Texas Instruments CY74FCT573ATSOC Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVC16373DLR OverviewIn the 48-BSSOP (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74LVC series. This electronic part is designed with 16 Bits. This device has been designed with 48 terminations available. 74LVC16373 is the family name of it. With a supply voltage of 3.3V, it operates. The device is equipped with 48 pins. It is part of the family of electronic devices called LVC/LCX/Z. 48 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. Input Lines consist of electronic circuits, and there are 3. On the basis of its reliability, this device is well suited for TR. It features maximum flexibility in design due to 24mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. Its superior flexibility is achieved by using 1 circuits. A maximal power current (ICC) is generated for its operation at 0.04mA. SN74LVC16373DLR Features48-BSSOP (0.295, 7.50mm Width) package 74LVC series 16 Bits 74LVC16373 family 48 pin count 48 pins SN74LVC16373DLR ApplicationsThere are a lot of Texas Instruments SN74LVC16373DLR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALVCH373ZQNR Overview20-VFBGA contains it. Tape & Reel (TR) is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the 74ALVCH series. There are 8 bits in this electronic part. In this device, there are 20 terminations. The family 74ALVCH373 includes it. The device is operated when the supply voltage is set to 1.8V. There are 20 pins attached to it. ALVC/VCX/A is the family name of this electronic device. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. Subcategory FF/Latches includes this part. The maximal supply voltage (Vsup) reaches 3.6V. There is 3.3V power supply for it. There are electronic circuits attached to the 8 input lines. The reliability of this device makes it well suited to TR. Its output current of 24mA ensures maximum design flexibility. A maximal power current (ICC) is generated for its operation at 0.02mA. SN74ALVCH373ZQNR Features20-VFBGA package 74ALVCH series 8 Bits 74ALVCH373 family 20 pin count 20 pins 3.3V power supplies SN74ALVCH373ZQNR ApplicationsThere are a lot of Texas Instruments SN74ALVCH373ZQNR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVTH162373DGGR OverviewPackage 48-TFSOP (0.240, 6.10mm Width) includes it. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 2.7V~3.6V. It is -40°C~85°C at the operating temperature. The 74LVTH series is associated with this FPGA. This electronic part is designed with 16 Bits. As far as this device is concerned, it has no terminations. This type belongs to the 74LVTH162373 family. It operates with a supply voltage of 3.3V. It has 48 pins that makes it easy to use. In terms of electronic devices, this one is in the LVT family. There are 48 pins on it. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. There are electronic circuits attached to the 1 input lines. This device is well suited for TR based on its reliable performance. It features maximum flexibility in design due to 12mA output current. For maximum efficiency, the supply voltage should be set to 3.3V. 3 output lines generate the binary equivalent of the input lines. The current consumed by the device is 5mA volts in quiescent mode, which cannot be affected by external factors. 8 circuits are used to provide this superior level of flexibility. SN74LVTH162373DGGR Features48-TFSOP (0.240, 6.10mm Width) package 74LVTH series 16 Bits 74LVTH162373 family 48 pin count 48 pins SN74LVTH162373DGGR ApplicationsThere are a lot of Texas Instruments SN74LVTH162373DGGR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLC59213IPWR OverviewIn the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. The Logic type of this electrical device is D-Type Latch. Surface Mount is used to mount this electronic part. A 4.5V~13.2V voltage supply is required for operation. The operating temperature is -40°C~85°C. In this device, there are 20 terminations. As a member of the TLC59213 family, it falls under that category. A 5.5V voltage supply is required for operation. 20 pins are provided. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. The part is in the Display Drivers subcategory. Its output current of -500mA ensures maximum design flexibility. TLC59213IPWR Features20-TSSOP (0.173, 4.40mm Width) package TLC59213 family 20 pin count 20 pins TLC59213IPWR ApplicationsThere are a lot of Texas Instruments TLC59213IPWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALVTH16373GR OverviewIn the 48-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. A Cut Tape (CT) package is used to package it. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 2.3V~2.7V 3V~3.6V, it operates. There is a temperature of -40°C~85°C at which the system operates. In the 74ALVTH series, this FPGA is located. It is designed with 16 bits. A device with this design has 48 terminations. It is a member of the 74ALVTH16373 family. In order to function, the supply voltage should be set to 2.5V. 48 pins are provided. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. It contains 3 input lines where electronic circuits are present. Based on its reliable performance, this device is appropriate for TR. With 32mA, maximum design flexibility is ensured. Input lines are converted into binary equivalents by 1 output lines. As far as external factors are concerned, it consumes 5mA of quiescent current without getting affected by them. A total of 2 elements make up this object. SN74ALVTH16373GR Features48-TFSOP (0.240, 6.10mm Width) package 74ALVTH series 16 Bits 74ALVTH16373 family 48 pin count 48 pins 2 elements SN74ALVTH16373GR ApplicationsThere are a lot of Texas Instruments SN74ALVTH16373GR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALVCH162841DL OverviewIn the package 56-BSSOP (0.295, 7.50mm Width), it can be found. A package of Tube has been used. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 1.65V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. The 74ALVCH series is associated with this FPGA. There are 20 bits in this electronic part. In this device, there are 56 terminations. 74ALVCH162841 is the family name of it. In order to operate it, the supply voltage must be 1.8V. 56 pins are included. In terms of electronic devices, this one is in the ALVC/VCX/A family. This board has 56 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. It is recommended that the supply voltage (Vsup) be greater than 1.65V. With 12mA, maximum design flexibility is ensured. 3 output lines generate the binary equivalent of the input lines. There are 2 elements in it. In order to operate properly, its maximum power current (ICC) should be 0.04mA. SN74ALVCH162841DL Features56-BSSOP (0.295, 7.50mm Width) package 74ALVCH series 20 Bits 74ALVCH162841 family 56 pin count 56 pins 2 elements SN74ALVCH162841DL ApplicationsThere are a lot of Texas Instruments SN74ALVCH162841DL Latches applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
