Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | SN74AHCT573PWR OverviewPackage 20-TSSOP (0.173, 4.40mm Width) includes it. A package of Cut Tape (CT) has been used. It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. This type belongs to the 74AHCT573 family. With a supply voltage of 5V, it operates. There are 20 pins on it. It is a member of the AHCT/VHCT/VT family of electronic devices. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There is 5V power supply for it. Electronic circuits are represented by 3 input lines. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 8mA output current. High efficiency requires a supply voltage of 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. 8 circuits enable it to achieve high performance. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA. SN74AHCT573PWR Features20-TSSOP (0.173, 4.40mm Width) package 74AHCT series 8 Bits 74AHCT573 family 20 pin count 20 pins 5V power supplies SN74AHCT573PWR ApplicationsThere are a lot of Texas Instruments SN74AHCT573PWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV573APWR OverviewIn the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. An FPGA in this series belongs to the 74LV family. It is designed with 8 bits. A device with this design has 20 terminations. 74LV573 is its family. The device works with a voltage of 2.5V for its supply voltage. The device is equipped with 20 pins. It is a member of the LV/LV-A/LVX/H family of electronic devices. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. 5.5V is the maximum supply voltage (Vsup). 3.3V power supplies are needed to operate it. A voltage greater than 2V must be supplied as a power supply (Vsup). An electronic circuit can be found on 2 input lines. Its reliable performance makes it an excellent choice for TR. The output current of 16mA makes it feature maximum design flexibility. SN74LV573APWR Features20-TSSOP (0.173, 4.40mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 3.3V power supplies SN74LV573APWR ApplicationsThere are a lot of Texas Instruments SN74LV573APWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT573PWR OverviewIn the package 20-TSSOP (0.173, 4.40mm Width), it can be found. The package is in the form of Tape & Reel (TR). The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. 74HCT is the series number of this FPGA. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74HCT573 family. In order to function, the supply voltage should be set to 5V. 20 pins are provided. It is part of the family of electronic devices called HCT. 20 pins are used in its design. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is suitable for TR. Its output current of 6mA ensures maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. SN74HCT573PWR Features20-TSSOP (0.173, 4.40mm Width) package 74HCT series 8 Bits 74HCT573 family 20 pin count 20 pins 5V power supplies SN74HCT573PWR ApplicationsThere are a lot of Texas Instruments SN74HCT573PWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT373DWR OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. A device such as this has 20 terminations designed. 74HCT373 is the family name of it. The supply voltage of the device is 5V. The device is equipped with 20 pins. It is a member of the HCT family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. This device has 2 ports. Subcategory FF/Latches includes this part. The system is powered by 5V sources. It contains 3 input lines where electronic circuits are present. On the basis of its reliability, this device is well suited for TR. Due to its 6mA output current, it offers maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. It consumes 8μA current from its quiescent state without being affected by external factors at all. 8 circuits are used to achieve superior flexibility. SN74HCT373DWR Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits 74HCT373 family 20 pin count 20 pins 5V power supplies SN74HCT373DWR ApplicationsThere are a lot of Texas Instruments SN74HCT373DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4099BM96 OverviewIt is embedded in the 16-SOIC (0.154, 3.90mm Width) package. As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Standard. There is a logic type of D-Type, Addressable associated with this electrical device. Surface Mount is used to mount this electronic part. There is no supply voltage for this device. There is a temperature of -55°C~125°C at which the system operates. The 4000B series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. As far as this device is concerned, it has no terminations. The family it belongs to is CD4099. The device works with a voltage of 5V for its supply voltage. 16 pins are included. The device has 16 pins. It is mounted according to the Surface Mount method. The part belongs to the FF/Latches subcategory. A supply voltage (Vsup) greater than 3V is required. Based on its reliable performance, this device is well suited to TR. As the output current is 6.8mA, the design flexibility is maximum. It consumes 80nA of quiescent current without being affected by external factors. A total of 1 elements make up this object. A maximal power current (ICC) is generated for its operation at 0.3mA. CD4099BM96 Features16-SOIC (0.154, 3.90mm Width) package 4000B series 8 Bits CD4099 family 16 pin count 16 pins 1 elements CD4099BM96 ApplicationsThere are a lot of Texas Instruments CD4099BM96 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS373NSR OverviewA package called 20-SOIC (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. It is 0°C~70°C at the operating temperature. The 74LS series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. The family it belongs to is 74LS373. In order to operate it, the supply voltage must be 5V. 20 pins are provided. There is a device in this electronic family called LS. It is designed with 20 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 24mA output current. For maximum efficiency, the supply voltage should be set to 5V. SN74LS373NSR Features20-SOIC (0.209, 5.30mm Width) package 74LS series 8 Bits 74LS373 family 20 pin count 20 pins 5V power supplies SN74LS373NSR ApplicationsThere are a lot of Texas Instruments SN74LS373NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC573E OverviewPackage 20-DIP (0.300, 7.62mm) includes it. It is packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. A 2V~6V supply voltage is required to operate it. A temperature of -55°C~125°C is used for operation. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74HC573. The device works with a voltage of 4.5V for its supply voltage. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of HC/UH. The pin configuration of the device is 20. Mounting this electronic component follows the Through Hole method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. 6V is the maximum supply voltage (Vsup). The device is powered by 2/6V power supplies. A supply voltage (Vsup) greater than 2V is required. As the output current is 7.8mA, the design flexibility is maximum. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of the system is achieved through its use of 8 circuits. CD74HC573E Features20-DIP (0.300, 7.62mm) package 74HC series 8 Bits 74HC573 family 20 pin count 20 pins 2/6V power supplies CD74HC573E ApplicationsThere are a lot of Texas Instruments CD74HC573E Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC373DW OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. This package has the format of Tube. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~6V. The operating temperature is -40°C~85°C. 74HC is the series number of this FPGA. With this electronic part, there are 8 bits. A device with this design has 20 terminations. The family it belongs to is 74HC373. In order to operate it, the supply voltage must be 5V. With 20 pins, it is equipped. It is part of the family of electronic devices called HC/UH. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 6V. A total of 2/6V power supplies are required for it to operate. (Vsup) should be greater than 2V. An electronic circuit can be found on 9 input lines. It features maximum flexibility in design due to 7.8mA output current. High efficiency requires maintaining the supply voltage at 5V. It consumes 8μA of quiescent current without being affected by outside factors. SN74HC373DW Features20-SOIC (0.295, 7.50mm Width) package 74HC series 8 Bits 74HC373 family 20 pin count 20 pins 2/6V power supplies SN74HC373DW ApplicationsThere are a lot of Texas Instruments SN74HC373DW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPIC6B273DWRG4 OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. Standard is the output configured for it. There is a logic type of D-Type Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. It is -40°C~125°C at the operating temperature. An FPGA in this series belongs to the TPIC family. It is designed with 8 bits. This device has been designed with 20 terminations available. It belongs to TPIC6B273 family. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. In the world of electronics, this electronic device belongs to the family of 6B. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. The part belongs to the FF/Latches subcategory. The system is powered by 5V sources. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 500mA output current. The supply voltage should be maintained at 5V for high efficiency. The binary equivalent of the input line is generated by 8 output lines. It consists of 1 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.3mA is needed for operation. TPIC6B273DWRG4 Features20-SOIC (0.295, 7.50mm Width) package TPIC series 8 Bits TPIC6B273 family 20 pin count 20 pins 5V power supplies 1 elements TPIC6B273DWRG4 ApplicationsThere are a lot of Texas Instruments TPIC6B273DWRG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC259N Overview16-DIP (0.300, 7.62mm) contains it. Tube is the packaging method. Standard is the output configured for it. The Logic type of this electrical device is D-Type, Addressable. The way in which this electronic part is mounted is Through Hole. It operates at a voltage of 2V~6V. The operating temperature is -40°C~85°C. The 74HC series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. In this device, there are 16 terminations. 74HC259 is the family name of it. In order to function, the supply voltage should be set to 5V. There are 16 pins on it. HC/UH is the family of this electronic device. Designed with 16 pins, it is compatible with a wide range of devices. Through Hole is the method used for mounting this electronic part. FF/Latches is the subcategory of this part. When Vsup reaches 6V, the maximal supply voltage is reached. There are 2/6V power supplies required for this machine to operate. There should be a voltage supply (Vsup) greater than 2V. Its 5.2mA output current allows for maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. Aquiescent current is consumed by 8μA without being affected by external forces. It consists of 1 elements. SN74HC259N Features16-DIP (0.300, 7.62mm) package 74HC series 8 Bits 74HC259 family 16 pin count 16 pins 2/6V power supplies 1 elements SN74HC259N ApplicationsThere are a lot of Texas Instruments SN74HC259N Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4044BD OverviewPackage 16-SOIC (0.154, 3.90mm Width) includes it. It is packaged in the way of Tube. It uses Tri-State as its output configuration. S-R Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 3V~18V. There is -55°C~125°C operating temperature. In the 4000B series, this FPGA is located. The design of this electronic part contains 4 bits. In this device, there are 16 terminations. The family in which it belongs to is CD4044. With a supply voltage of 5V, it operates. There are 16 pins on it. In addition, it is designed with a pin number of 16. Mounting this electronic component follows the Surface Mount method. It is recommended to have a higher supply voltage (Vsup) than 3V. It contains 8 input lines where electronic circuits are present. The output current of 6.8mA makes it feature maximum design flexibility. Without external influences, it consumes 20μA of quiescent current. It consists of 1 elements. In order to operate properly, its maximum power current (ICC) should be 0.06mA. CD4044BD Features16-SOIC (0.154, 3.90mm Width) package 4000B series 4 Bits CD4044 family 16 pin count 16 pins 1 elements CD4044BD ApplicationsThere are a lot of Texas Instruments CD4044BD Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT573DWR OverviewThere is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. The 74HCT series is associated with this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. 74HCT573 is its family. A 5V voltage supply is required for operation. 20 pins are provided. This electronic device is categorized as a HCT electronic device. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. A total of 5V power supplies are required for it to operate. Electronic circuits comprise 3 input lines. Based on its reliable performance, this device is suitable for TR. The 6mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are no external factors that affect it, so it consumes 8μA quiescent current. 8 circuits are used to achieve superior flexibility. SN74HCT573DWR Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits 74HCT573 family 20 pin count 20 pins 5V power supplies SN74HCT573DWR ApplicationsThere are a lot of Texas Instruments SN74HCT573DWR Latches applications.
|
6649
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV573ADW OverviewIt is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the way it is packaged. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. The 74LV series contains FPGAs of this type. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74LV573 family. The device works with a voltage of 2.5V for its supply voltage. 20 pins are available on it. It is a member of the LV/LV-A/LVX/H family of electronic devices. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. A total of 3.3V power supplies are needed to run it. It is recommended that the supply voltage (Vsup) be greater than 2V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. The 16mA output current gives it maximum design flexibility. BROADSIDE VERSION OF 373 are also a characteristic of it. SN74LV573ADW Features20-SOIC (0.295, 7.50mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 3.3V power supplies SN74LV573ADW ApplicationsThere are a lot of Texas Instruments SN74LV573ADW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT573NSR OverviewIn the package 20-SOIC (0.209, 5.30mm Width), it can be found. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. The family 74HCT573 includes it. In order to function, the supply voltage should be set to 5V. With 20 pins, it is equipped. There is a device in this electronic family called HCT. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. On the basis of its reliability, this device is well suited for TR. The output current of 6mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Without external influences, it consumes 8μA of quiescent current. SN74HCT573NSR Features20-SOIC (0.209, 5.30mm Width) package 74HCT series 8 Bits 74HCT573 family 20 pin count 20 pins 5V power supplies SN74HCT573NSR ApplicationsThere are a lot of Texas Instruments SN74HCT573NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LVC573APW OverviewIn the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 1.65V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. The 74LVC series is associated with this FPGA. This electronic part is designed with 8 Bits. This device has 20 terminations. This type belongs to the 74LVC573 family. The device is operated when the supply voltage is set to 3.3V. 20 pins are included. It is a member of the LVC/LCX/Z family of electronic devices. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. An electronic circuit can be found on 3 input lines. Its output current of 24mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 1.8V. As far as external factors are concerned, it consumes 10μA of quiescent current without getting affected by them. The superior flexibility of this circuit can be attributed to the use of 8 circuits. SN74LVC573APW Features20-TSSOP (0.173, 4.40mm Width) package 74LVC series 8 Bits 74LVC573 family 20 pin count 20 pins SN74LVC573APW ApplicationsThere are a lot of Texas Instruments SN74LVC573APW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC373M OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way it is packaged. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. An FPGA in this series belongs to the 74HC family. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. There is no doubt that it belongs to the family 74HC373. In order to function, the supply voltage should be set to 4.5V. The device is equipped with 20 pins. This electronic device is categorized as a HC/UH electronic device. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. It reaches a maximum supply voltage (Vsup) of 6V. A total of 2/6V power supplies are needed to run it. A voltage greater than 2V must be supplied as a power supply (Vsup). There are 9 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 7.8mA, it is highly flexible in terms of design. Aquiescent current is consumed by 8μA without being affected by external forces. 8 circuits enable it to achieve high performance. CD74HC373M Features20-SOIC (0.295, 7.50mm Width) package 74HC series 8 Bits 74HC373 family 20 pin count 20 pins 2/6V power supplies CD74HC373M ApplicationsThere are a lot of Texas Instruments CD74HC373M Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC259M Overview16-SOIC (0.154, 3.90mm Width) contains it. A package of Tube has been used. There is a Standard output configured. There is D-Type, Addressable logic type for this electrical device. According to Surface Mount, this electronic part is mounted. A 2V~6V voltage supply is required for operation. The temperature at which the machine is operating is -55°C~125°C. The 74HC series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. A device with this design has 16 terminations. There is no doubt that it belongs to the family 74HC259. In order to operate it, the supply voltage must be 4.5V. It is equipped with 16 pin count. HC/UH is the family name of this electronic device. There are 16 pins on it. A Surface Mount mounting method has been used for this electronic part. The part belongs to the FF/Latch subcategory. During this period, the maximum supply voltage (Vsup) reaches 6V. A supply voltage (Vsup) greater than 2V is required. Electronic circuits comprise 1 input lines. The 5.2mA output current gives it maximum design flexibility. It consumes 8μA current from its quiescent state without being affected by external factors at all. 2 circuits enable it to achieve high performance. CD74HC259M Features16-SOIC (0.154, 3.90mm Width) package 74HC series 8 Bits 74HC259 family 16 pin count 16 pins CD74HC259M ApplicationsThere are a lot of Texas Instruments CD74HC259M Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT373DW OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. A Tube package is used to package it. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74HCT series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. This device has 20 terminations. The family in which it belongs to is 74HCT373. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a HCT electronic device. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. The part belongs to the FF/Latches subcategory. 5V power supplies are needed to operate it. It consists of 9 input lines from which an electronic circuit can be built. As the output current is 6mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Without external influences, it consumes 8μA of quiescent current. It achieves superior flexibility by using 8 circuits. SN74HCT373DW Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits 74HCT373 family 20 pin count 20 pins 5V power supplies SN74HCT373DW ApplicationsThere are a lot of Texas Instruments SN74HCT373DW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHC573DW OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. As a result, it has a packaging of Tube. Tri-State is the output configured for it. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74AHC series. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. This type belongs to the 74AHC573 family. The device works with a voltage of 3.3V for its supply voltage. 20 pins are included. This electronic device is categorized as a AHC/VHC/H/U/V electronic device. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. 2 ports are available on this device. Subcategory Bus Driver/Transceiver includes this part. Vsup reaches 5.5V as the maximum supply voltage. The device is powered by 2/5.5V power supplies. Ensure that the supply voltage (Vsup) is greater than 2V. There are 3 input lines in which electronic circuits are present. With an output current of 8mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 2.5V. It consumes 4μA of quiescent current without being affected by outside factors. In order to achieve its superior flexibility, 8 circuits are used. The maximal power current (ICC) supplied for its operation reaches 0.04mA. SN74AHC573DW Features20-SOIC (0.295, 7.50mm Width) package 74AHC series 8 Bits 74AHC573 family 20 pin count 20 pins 2/5.5V power supplies SN74AHC573DW ApplicationsThere are a lot of Texas Instruments SN74AHC573DW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC259E OverviewIn the 16-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the way in which it is packaged. There is a Standard output configured. This electrical device has the logic type D-Type, Addressable. Electronic parts are mounted in accordance with Through Hole. The voltage supply is 2V~6V. A temperature of -55°C~125°C is used for operation. In the 74HC series, this FPGA is located. It is designed with 8 bits. In this device, there are 16 terminations that have been designed. 74HC259 is its family. In order to operate it, the supply voltage must be 4.5V. 16 pins are included. In the world of electronics, this electronic device belongs to the family of HC/UH. There are 16 pins on it. It is mounted according to the Through Hole method. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 6V. A supply voltage (Vsup) greater than 2V is required. It consists of 1 input lines from which an electronic circuit can be built. Its output current of 5.2mA ensures maximum design flexibility. The quiescent current consumed by it is 8μA because it is unaffected by external factors. The superior flexibility of this circuit can be attributed to the use of 2 circuits. CD74HC259E Features16-DIP (0.300, 7.62mm) package 74HC series 8 Bits 74HC259 family 16 pin count 16 pins CD74HC259E ApplicationsThere are a lot of Texas Instruments CD74HC259E Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS259N OverviewA package called 16-DIP (0.300, 7.62mm) contains it. As a result, it has a packaging of Tube. It uses Standard as its output configuration. There is a logic type of D-Type, Addressable for this electrical device. According to Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. This FPGA is part of the 74ALS series. There are 8 bits in this electronic part. In this device, there are 16 terminations. 74ALS259 is the family name of it. It operates with a supply voltage of 5V. With 16 pins, it is equipped. It is a member of the ALS family of electronic devices. The pin configuration of the device is 16. The electronic part is mounted using the Through Hole method. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. Electronic circuits are represented by 3 input lines. The output current of 8mA makes it feature maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The current consumed by the device is 14mA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object. SN74ALS259N Features16-DIP (0.300, 7.62mm) package 74ALS series 8 Bits 74ALS259 family 16 pin count 16 pins 5V power supplies 1 elements SN74ALS259N ApplicationsThere are a lot of Texas Instruments SN74ALS259N Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV573APW OverviewThere is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74LV series contains FPGAs of this type. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family 74LV573 includes it. The supply voltage of the device is 2.5V. 20 pins are available on it. LV/LV-A/LVX/H is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. It reaches a maximum supply voltage (Vsup) of 5.5V. It operates from 3.3V power supplies. Ensure that the supply voltage (Vsup) is greater than 2V. Electronic circuits comprise 8 input lines. With an output current of 16mA, it is highly flexible in terms of design. When the maximum power current (ICC) is supplied for its operation, it reaches 0.02mA. SN74LV573APW Features20-TSSOP (0.173, 4.40mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 3.3V power supplies SN74LV573APW ApplicationsThere are a lot of Texas Instruments SN74LV573APW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS373DW OverviewThere is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74LS373. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the LS family. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. This part is included in FF/Latches. A total of 5V power supplies are required for it to operate. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Aquiescent current is consumed by 24mA without being affected by external forces. Its superior flexibility is achieved by using 8 circuits. SN74LS373DW Features20-SOIC (0.295, 7.50mm Width) package 74LS series 8 Bits 74LS373 family 20 pin count 20 pins 5V power supplies SN74LS373DW ApplicationsThere are a lot of Texas Instruments SN74LS373DW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHCT373NSR OverviewPackage 20-SOIC (0.209, 5.30mm Width) includes it. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74AHCT series is associated with this FPGA. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. The family 74AHCT373 includes it. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AHCT/VHCT/VT family. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. A total of 5V power supplies are needed to run it. The supply voltage (Vsup) should be greater than 4.5V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is suitable for TR. Due to its 8mA output current, it offers maximum design flexibility. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation. SN74AHCT373NSR Features20-SOIC (0.209, 5.30mm Width) package 74AHCT series 8 Bits 74AHCT373 family 20 pin count 20 pins 5V power supplies SN74AHCT373NSR ApplicationsThere are a lot of Texas Instruments SN74AHCT373NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC373NS OverviewIn the package 20-SOIC (0.209, 5.30mm Width), it can be found. The package is in the form of Tube. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. This device has 20 terminations. It is a member of the 74HC373 family. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. There is a device in this electronic family called HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 6V. 2/6V power supplies are needed to operate it. It is recommended that the supply voltage (Vsup) be greater than 2V. Based on its reliable performance, this device is well suited to TR. Optimal efficiency requires 5V as the supply voltage. SN74HC373NS Features20-SOIC (0.209, 5.30mm Width) package 74HC series 8 Bits 74HC373 family 20 pin count 20 pins 2/6V power supplies SN74HC373NS ApplicationsThere are a lot of Texas Instruments SN74HC373NS Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV373APW OverviewA package called 20-TSSOP (0.173, 4.40mm Width) contains it. Tube is the way it is packaged. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74LV series. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The family in which it belongs to is 74LV373. It operates with a supply voltage of 2.5V. 20 pins are provided. It is a member of the LV/LV-A/LVX/H family of electronic devices. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. This part is included in FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are needed to run it. A voltage greater than 2V must be supplied as a power supply (Vsup). The 16mA output current gives it maximum design flexibility. 8 output lines provide binary equivalents of input lines. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. The element count is 1. Its maximum current supply (ICC) reaches 0.02mA. SN74LV373APW Features20-TSSOP (0.173, 4.40mm Width) package 74LV series 8 Bits 74LV373 family 20 pin count 20 pins 3.3V power supplies 1 elements SN74LV373APW ApplicationsThere are a lot of Texas Instruments SN74LV373APW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT373M OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. The temperature at which the machine is operating is -55°C~125°C. The 74HCT series contains FPGAs of this type. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74HCT373. With the supply voltage set at 5V, it is able to operate. 20 pins are available on it. It is a member of the HCT family of electronic devices. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. With 6mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. The binary equivalent of the input line is generated by 3 output lines. The quiescent current consumed by it is 8μA because it is unaffected by external factors. The circuit's superior flexibility is achieved through the use of 8 circuits. CD74HCT373M Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits 74HCT373 family 20 pin count 20 pins 5V power supplies CD74HCT373M ApplicationsThere are a lot of Texas Instruments CD74HCT373M Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LVC573ANS OverviewThe 20-SOIC (0.209, 5.30mm Width) package contains it. Packaged in the way of Tube. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. It operates at a voltage of 1.65V~3.6V. It is -40°C~125°C at the operating temperature. This FPGA is part of the 74LVC series. Electronic parts with 8 bits are designed for this application. As far as this device is concerned, it has no terminations. 74LVC573 is the family name of it. The device is operated when the supply voltage is set to 3.3V. There are 20 pins attached to it. LVC/LCX/Z is the family of this electronic device. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. There are 3.3V power supplies required for this machine to operate. As a result of its reliable performance, it is well suited for TR. SN74LVC573ANS Features20-SOIC (0.209, 5.30mm Width) package 74LVC series 8 Bits 74LVC573 family 20 pin count 3.3V power supplies SN74LVC573ANS ApplicationsThere are a lot of Texas Instruments SN74LVC573ANS Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4042BD OverviewPackage 16-SOIC (0.154, 3.90mm Width) includes it. Tube is the way it is packaged. The output it is configured with uses Differential. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. It operates at a voltage of 3V~18V. The temperature at which the machine is operating is -55°C~125°C. This FPGA is part of the 4000B series. The design of this electronic part contains 4 bits. This device is designed with 16 terminations. There is no doubt that it belongs to the family CD4042. A 5V voltage supply is required for operation. It is equipped with 16 pin count. It is designed with 16 pins. Electronic parts are mounted using the Surface Mount method. There is a subcategory of FF/Latch for this part. It is recommended that the supply voltage (Vsup) be greater than 3V. The 6.8mA output current gives it maximum design flexibility. Input lines are converted into binary equivalents by 4 output lines. As far as external factors are concerned, it consumes 40nA of quiescent current without getting affected by them. It achieves superior flexibility by using 1 circuits. There are also characteristics of PROGRAMMABLE TRIGGER TYPE associated with it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.06mA. CD4042BD Features16-SOIC (0.154, 3.90mm Width) package 4000B series 4 Bits CD4042 family 16 pin count 16 pins CD4042BD ApplicationsThere are a lot of Texas Instruments CD4042BD Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HCT573DW OverviewPackage 20-SOIC (0.295, 7.50mm Width) includes it. As a result, it has a packaging of Tube. Tri-State is used for the output it is configured with. This electrical device has Logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74HCT series. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. 74HCT573 is the family name of it. A 5V voltage supply is required for operation. It is equipped with 20 pin count. It is part of the family of electronic devices called HCT. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies attached to it. There are electronic circuits attached to the 8 input lines. The 6mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. SN74HCT573DW Features20-SOIC (0.295, 7.50mm Width) package 74HCT series 8 Bits 74HCT573 family 20 pin count 20 pins 5V power supplies SN74HCT573DW ApplicationsThere are a lot of Texas Instruments SN74HCT573DW Latches applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.