Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | 74ACT11373DWG4 OverviewIn the SOIC package, it can be found as an embedded module. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. With a supply voltage of 5V, it operates. With 24 pins, it is equipped. This electronic device belongs to the family of ACT. The device has 24 pins. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. The device is powered by 5V power supplies. High efficiency requires a supply voltage of 5V. It consumes 8μA of quiescent current without being affected by external factors. In order to achieve its superior flexibility, 8 circuits are used. In the low level output current, the value is set to 24mA. There is -24mA high level output current set. There should be a temperature below 85°C at which the system is operating. -40°C is the minimum operating temperature. The maximum supply voltage is 5.5V. The minimal voltage for operation is 4.5V. As for the logic IC it uses, it is a BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility. 74ACT11373DWG4 FeaturesSOIC package 8 Bits 24 pin count 24 pins 5V power supplies 74ACT11373DWG4 ApplicationsThere are a lot of Texas Instruments 74ACT11373DWG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV373ARGYRG4 OverviewIn the package VQFN, it can be found. Tape and Reel is the way in which it is packaged. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. The device works with a voltage of 2.5V for its supply voltage. It has 20 pins that makes it easy to use. LV/LV-A/LVX/H is the family name of this electronic device. The device has 20 pins. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. There are 3.3V power supplies required for this machine to operate. An electronic circuit can be found on 8 input lines. It consists of 1 elements. In the low level output current, the value is set to 32mA. -16mA represents the high level output current. Ideally, the temperature should not be higher than 125°C. A temperature greater than -40°C should be used for operation. There is a maximum voltage of 5.5V supported. There is a minimum supply voltage of 2V for it. As for the logic IC it uses, it is a BUS DRIVER. Due to its 16mA output current, it offers maximum design flexibility. SN74LV373ARGYRG4 FeaturesVQFN package 8 Bits 20 pin count 20 pins 3.3V power supplies 1 elements SN74LV373ARGYRG4 ApplicationsThere are a lot of Texas Instruments SN74LV373ARGYRG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AC373DWRE4 OverviewIn the package SOIC, it can be found. Packaged in the way of Tape and Reel. It is designed with 8 bits. This device is designed with 20 terminations. It operates with a supply voltage of 3.3V. 20 pins are included. AC is the family of this electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It operates from 3.3/5V power supplies. The reliability of this device makes it well suited to TR. The superior flexibility of the system is achieved through its use of 8 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA. There is 24mA output current at the low level. -24mA represents the high level output current. Lower than 85°C is the ideal operating temperature. There should be a temperature above -40°C at which the device operates. The maximum supply voltage is 6V. There is a minimum supply voltage of 2V for it. There is a logic IC BUS DRIVER used in the system. The output current of this device is 24mA, which makes it a very flexible design element. SN74AC373DWRE4 FeaturesSOIC package 8 Bits 20 pin count 20 pins 3.3/5V power supplies SN74AC373DWRE4 ApplicationsThere are a lot of Texas Instruments SN74AC373DWRE4 Latches applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.