Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartUltrasonic Receivers, Transmitters(5193)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments |
6544
In-stock
|
Get Quote | ||||
| Texas Instruments | SN74AHC573DGVR OverviewThe package in which it is embedded is named 20-TFSOP (0.173, 4.40mm Width). Cut Tape (CT) is the packaging method. There is a Tri-State output configured. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74AHC series. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74AHC573. With the supply voltage set at 3.3V, it is able to operate. It has 20 pins that makes it easy to use. It is a member of the AHC/VHC/H/U/V family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. Vsup reaches 5.5V as the maximum supply voltage. The system is powered by 2/5.5V sources. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. It consists of 3 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TR. It consumes 4μA of quiescent current without being affected by external factors. As its maximal power current (ICC) reaches 0.04mA, it is able to operate. SN74AHC573DGVR Features20-TFSOP (0.173, 4.40mm Width) package 74AHC series 8 Bits 74AHC573 family 20 pin count 20 pins 2/5.5V power supplies SN74AHC573DGVR ApplicationsThere are a lot of Texas Instruments SN74AHC573DGVR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4099BPWR OverviewThere is an embedded version of it in package 16-TSSOP (0.173, 4.40mm Width). This package has the format of Cut Tape (CT). It is configured with an output of Standard. The Logic type of this electrical device is D-Type, Addressable. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 3V~18V, it operates. There is a temperature of -55°C~125°C at which the system operates. In the 4000B series, this FPGA is located. With this electronic part, there are 8 bits. In this device, there are 16 terminations. It belongs to CD4099 family. The device works with a voltage of 5V for its supply voltage. 16 pins are available on it. With the design of the board, there are only 16 pins. Surface Mount is used to mount this electronic part. There is a subcategory of FF/Latches for this part. It is recommended to have a higher supply voltage (Vsup) than 3V. There are 1 input lines in which electronic circuits are present. The reliability of this device makes it well suited to TR. The output current of 6.8mA makes it feature maximum design flexibility. Without external influences, it consumes 100μA quiescent current. In order to achieve its superior flexibility, 2 circuits are used. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA. CD4099BPWR Features16-TSSOP (0.173, 4.40mm Width) package 4000B series 8 Bits CD4099 family 16 pin count 16 pins CD4099BPWR ApplicationsThere are a lot of Texas Instruments CD4099BPWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHC373DGVR OverviewIn the 20-TFSOP (0.173, 4.40mm Width) package, it is embedded. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 2V~5.5V. There is -40°C~85°C operating temperature. It is a type of FPGA belonging to the 74AHC series. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. The family in which it belongs to is 74AHC373. The device is operated when the supply voltage is set to 3.3V. There are 20 pins on it. AHC/VHC/H/U/V is the family name of this electronic device. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. This part is included in FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 2/5.5V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 2V. It consists of 8 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TR. In order to operate properly, its maximum power current (ICC) should be 0.04mA. SN74AHC373DGVR Features20-TFSOP (0.173, 4.40mm Width) package 74AHC series 8 Bits 74AHC373 family 20 pin count 20 pins 2/5.5V power supplies SN74AHC373DGVR ApplicationsThere are a lot of Texas Instruments SN74AHC373DGVR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4043BNSR OverviewA package called 16-SOIC (0.209, 5.30mm Width) contains it. Cut Tape (CT) is the way it is packaged. It uses Tri-State as the output. This electrical device has the logic type S-R Latch. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 3V~18V. There is -55°C~125°C operating temperature. In the 4000B series, this FPGA is located. 4 Bits are used in the design of this electronic part. A device such as this has 16 terminations designed. The family in which it belongs to is CD4043. The supply voltage of the device is 5V. There are 16 pins on it. With the design of the board, there are only 16 pins. It is mounted according to the Surface Mount method. (Vsup) should be greater than 3V. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is well suited to TR. Due to its 6.8mA output current, it offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The quiescent current consumed by it is 20μA because it is unaffected by external factors. It consists of 1 elements. As its maximal power current (ICC) reaches 0.06mA, it is able to operate. CD4043BNSR Features16-SOIC (0.209, 5.30mm Width) package 4000B series 4 Bits CD4043 family 16 pin count 16 pins 1 elements CD4043BNSR ApplicationsThere are a lot of Texas Instruments CD4043BNSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74HCT373NSR OverviewIn the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A package of Cut Tape (CT) has been used. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74HCT series, this FPGA is located. It is designed with 8 bits. A device with this design has 20 terminations. The family it belongs to is 74HCT373. A 5V voltage supply is required for operation. 20 pins are included. In terms of electronic devices, this one is in the HCT family. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the FF/Latches subcategory. There is 5V power supply for it. Electronic circuits comprise 3 input lines. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 6mA output current. The supply voltage should be maintained at 5V for high efficiency. It consumes 8μA of quiescent current without being affected by external factors. SN74HCT373NSR Features20-SOIC (0.209, 5.30mm Width) package 74HCT series 8 Bits 74HCT373 family 20 pin count 20 pins 5V power supplies SN74HCT373NSR ApplicationsThere are a lot of Texas Instruments SN74HCT373NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHC573N OverviewPackage 20-DIP (0.300, 7.62mm) includes it. Tube is the way it is packaged. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74AHC is the series number of this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74AHC573. In order to function, the supply voltage should be set to 3.3V. It has 20 pins that makes it easy to use. AHC/VHC/H/U/V is the family name of this electronic device. 20 pins are used in its design. Through Hole is the way in which this electronic part is mounted. This device has 2 ports. In the subcategory Bus Driver/Transceiver, this part belongs. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. 2/5.5V power supplies are needed to operate it. (Vsup) should be greater than 2V. An electronic circuit can be found on 3 input lines. With 8mA, maximum design flexibility is ensured. In order to achieve its superior flexibility, 8 circuits are used. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA. SN74AHC573N Features20-DIP (0.300, 7.62mm) package 74AHC series 8 Bits 74AHC573 family 20 pin count 20 pins 2/5.5V power supplies SN74AHC573N ApplicationsThere are a lot of Texas Instruments SN74AHC573N Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHCT373N OverviewA package called 20-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74AHCT family. This electronic part is designed with 8 Bits. This device has 20 terminations. The family in which it belongs to is 74AHCT373. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT/VT. In addition, it is designed with a pin number of 20. Through Hole is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. Electronic circuits comprise 3 input lines. With an output current of 8mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. In order to operate properly, its maximum power current (ICC) should be 0.04mA. SN74AHCT373N Features20-DIP (0.300, 7.62mm) package 74AHCT series 8 Bits 74AHCT373 family 20 pin count 20 pins 5V power supplies SN74AHCT373N ApplicationsThere are a lot of Texas Instruments SN74AHCT373N Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV373ATNSR OverviewThe 20-SOIC (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LV series. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74LV373. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. It is a member of the LV/LV-A/LVX/H family of electronic devices. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. It consists of 8 input lines from which an electronic circuit can be built. This device is well suited for TR based on its reliable performance. The output current of 16mA makes it feature maximum design flexibility. Without external influences, it consumes 2μA quiescent current. The maximal power current (ICC) supplied for its operation reaches 0.02mA. SN74LV373ATNSR Features20-SOIC (0.209, 5.30mm Width) package 74LV series 8 Bits 74LV373 family 20 pin count 20 pins 3.3V power supplies SN74LV373ATNSR ApplicationsThere are a lot of Texas Instruments SN74LV373ATNSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVC573ADGVR Overview20-TFSOP (0.173, 4.40mm Width) contains it. Cut Tape (CT) is the packaging method. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 1.65V~3.6V, it operates. It operates at -40°C~85°C degrees Celsius. 74LVC is the series number of this FPGA. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74LVC573. With the supply voltage set at 3.3V, it is able to operate. 20 pins are available on it. LVC/LCX/Z is the family name of this electronic device. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is well suited to TR. Due to its 24mA output current, it offers maximum design flexibility. SN74LVC573ADGVR Features20-TFSOP (0.173, 4.40mm Width) package 74LVC series 8 Bits 74LVC573 family 20 pin count 20 pins SN74LVC573ADGVR ApplicationsThere are a lot of Texas Instruments SN74LVC573ADGVR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV573ADWR OverviewPackage 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. There is -40°C~85°C operating temperature. The 74LV series contains FPGAs of this type. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. As a member of the 74LV573 family, it falls under that category. In order to operate it, the supply voltage must be 2.5V. There are 20 pins attached to it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. There is 3.3V power supply for it. There should be a voltage supply (Vsup) greater than 2V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TR. With 16mA, maximum design flexibility is ensured. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is also characterized by BROADSIDE VERSION OF 373. SN74LV573ADWR Features20-SOIC (0.295, 7.50mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 3.3V power supplies SN74LV573ADWR ApplicationsThere are a lot of Texas Instruments SN74LV573ADWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV573ATDWR OverviewThe package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 2V~5.5V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74LV series. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74LV573. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is well suited to TR. Its 16mA output current allows for maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. The maximal power current (ICC) supplied for its operation reaches 0.02mA. SN74LV573ATDWR Features20-SOIC (0.295, 7.50mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 5V power supplies SN74LV573ATDWR ApplicationsThere are a lot of Texas Instruments SN74LV573ATDWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV373ATDWR OverviewA package called 20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~5.5V. It operates at -40°C~85°C degrees Celsius. The 74LV series is associated with this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations. The family 74LV373 includes it. A 5V voltage supply is required for operation. 20 pins are included. It is a member of the LV/LV-A/LVX/H family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. A total of 3.3V power supplies are needed to run it. The reliability of this device makes it well suited to TR. As the output current is 16mA, the design flexibility is maximum. The supply voltage should be maintained at 5V for high efficiency. Input lines are generated as binary equivalents by 8 output lines. This object is composed of 1 elements. When the maximum power current (ICC) is supplied for its operation, it reaches 0.02mA. SN74LV373ATDWR Features20-SOIC (0.295, 7.50mm Width) package 74LV series 8 Bits 74LV373 family 20 pin count 20 pins 3.3V power supplies 1 elements SN74LV373ATDWR ApplicationsThere are a lot of Texas Instruments SN74LV373ATDWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVTH373NSR OverviewThe 20-SOIC (0.209, 5.30mm Width) package contains it. Packaged in the way of Tape & Reel (TR). There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. With a supply voltage of 2.7V~3.6V, it operates. A temperature of -40°C~85°C is used for operation. The 74LVTH series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74LVTH373. In order to operate it, the supply voltage must be 3.3V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of LVT. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. (Vsup) should be greater than 2.7V. Based on its reliable performance, this device is appropriate for TR. The output current of 64mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 3.3V. Input lines are converted into binary equivalents by 8 output lines. This element consists of 1. Its maximum current supply (ICC) reaches 5mA. SN74LVTH373NSR Features20-SOIC (0.209, 5.30mm Width) package 74LVTH series 8 Bits 74LVTH373 family 20 pin count 20 pins 1 elements SN74LVTH373NSR ApplicationsThere are a lot of Texas Instruments SN74LVTH373NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVTH373DBR Overview20-SSOP (0.209, 5.30mm Width) contains it. It is packaged in the way of Cut Tape (CT). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 2.7V~3.6V is used as the supply voltage for this device. The operating temperature is -40°C~85°C. The 74LVTH series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The family 74LVTH373 includes it. A 3.3V voltage supply is required for operation. The device is equipped with 20 pins. This electronic device is categorized as a LVT electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. Subcategory FF/Latches includes this part. When Vsup reaches 3.6V, the maximal supply voltage is reached. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. The 64mA output current gives it maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. Maximum power supply (ICC) for its operation is 5mA. SN74LVTH373DBR Features20-SSOP (0.209, 5.30mm Width) package 74LVTH series 8 Bits 74LVTH373 family 20 pin count 20 pins SN74LVTH373DBR ApplicationsThere are a lot of Texas Instruments SN74LVTH373DBR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVC573ARGYR OverviewIn the 20-VFQFN Exposed Pad package, it can be found as an embedded module. It is packaged in the way of Cut Tape (CT). It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The voltage supply is 1.65V~3.6V. A temperature of -40°C~85°C is used for operation. The 74LVC series contains FPGAs of this type. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. 74LVC573 is the family name of it. The device is operated when the supply voltage is set to 3.3V. With 20 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory Bus Driver/Transceiver contains this part. There are electronic circuits attached to the 3 input lines. As a result of its reliable performance, it is well suited for TR. It features maximum flexibility in design due to 24mA output current. The quiescent current consumed by it is 10μA because it is unaffected by external factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits. SN74LVC573ARGYR Features20-VFQFN Exposed Pad package 74LVC series 8 Bits 74LVC573 family 20 pin count 20 pins SN74LVC573ARGYR ApplicationsThere are a lot of Texas Instruments SN74LVC573ARGYR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ACT573DBR OverviewA package called 20-SSOP (0.209, 5.30mm Width) contains it. A Cut Tape (CT) package is used to package it. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74ACT series. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. There is no doubt that it belongs to the family 74ACT573. The supply voltage of the device is 5V. There are 20 pins on it. There is a device in this electronic family called ACT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. Its 24mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Maximum power supply (ICC) for its operation is 0.04mA. SN74ACT573DBR Features20-SSOP (0.209, 5.30mm Width) package 74ACT series 8 Bits 74ACT573 family 20 pin count 20 pins 5V power supplies SN74ACT573DBR ApplicationsThere are a lot of Texas Instruments SN74ACT573DBR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AC573NSR OverviewThere is an embedded version of it in package 20-SOIC (0.209, 5.30mm Width). A Tape & Reel (TR) package is used to package it. Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~6V. It operates at -40°C~85°C degrees Celsius. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74AC573 is its family. The supply voltage of the device is 3V. There are 20 pins on it. There is a device in this electronic family called AC. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. Subcategory FF/Latches includes this part. 6V is the maximum voltage (Vsup) that can be supplied. There are 3.3/5V power supplies required for this machine to operate. A voltage greater than 2V must be supplied as a power supply (Vsup). There are 8 input lines in which electronic circuits are present. Based on its reliable performance, this device is appropriate for TR. Its output current of 24mA ensures maximum design flexibility. BROADSIDE VERSION OF 373 are other characteristics of it. The maximal power current (ICC) supplied for its operation reaches 0.04mA. SN74AC573NSR Features20-SOIC (0.209, 5.30mm Width) package 74AC series 8 Bits 74AC573 family 20 pin count 20 pins 3.3/5V power supplies SN74AC573NSR ApplicationsThere are a lot of Texas Instruments SN74AC573NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74F373NSR OverviewThe package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). This package has the format of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. This FPGA is part of the 74F series. It is designed with 8 bits. This device is designed with 20 terminations. It is a member of the 74F373 family. A 5V voltage supply is required for operation. It has 20 pins that makes it easy to use. F/FAST is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. It consists of 8 input lines from which an electronic circuit can be built. Its reliable performance makes it an excellent choice for TR. The output current of 24mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. In order for the device to operate at its maximum power, the maximum power current (ICC) of 55mA is needed for operation. SN74F373NSR Features20-SOIC (0.209, 5.30mm Width) package 74F series 8 Bits 74F373 family 20 pin count 20 pins 5V power supplies SN74F373NSR ApplicationsThere are a lot of Texas Instruments SN74F373NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ACT373DBR OverviewPackage 20-SSOP (0.209, 5.30mm Width) includes it. Packaged in the way of Cut Tape (CT). It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ACT series. It is designed with 8 bits. This device is designed with 20 terminations. This type belongs to the 74ACT373 family. With the supply voltage set at 5V, it is able to operate. 20 pins are included. It is a member of the ACT family of electronic devices. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. There is 5V power supply for it. Input Lines consist of electronic circuits, and there are 3. The device's reliable performance makes it a good choice for TR. As the output current is 24mA, the design flexibility is maximum. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Maximum power supply (ICC) for its operation is 0.04mA. SN74ACT373DBR Features20-SSOP (0.209, 5.30mm Width) package 74ACT series 8 Bits 74ACT373 family 20 pin count 20 pins 5V power supplies SN74ACT373DBR ApplicationsThere are a lot of Texas Instruments SN74ACT373DBR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALVCH373DGVR OverviewPackage 20-TFSOP (0.173, 4.40mm Width) includes it. Cut Tape (CT) is the way in which it is packaged. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 1.65V~3.6V voltage supply is required for operation. The operating temperature is -40°C~85°C. The 74ALVCH series contains FPGAs of this type. The electronic part in this image has 8 bits. A device such as this has 20 terminations designed. 74ALVCH373 is its family. In order to operate it, the supply voltage must be 1.8V. It is equipped with 20 pin count. ALVC/VCX/A is the family name of this electronic device. There are 20 pins on it. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is appropriate for TR. A maximal power current (ICC) is generated for its operation at 0.02mA. SN74ALVCH373DGVR Features20-TFSOP (0.173, 4.40mm Width) package 74ALVCH series 8 Bits 74ALVCH373 family 20 pin count 20 pins SN74ALVCH373DGVR ApplicationsThere are a lot of Texas Instruments SN74ALVCH373DGVR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74AC573M96 OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. A Cut Tape (CT) package is used to package it. It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. It operates with a supply voltage of 1.5V~5.5V. It operates at -55°C~125°C degrees Celsius. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. This device has 20 terminations. The family in which it belongs to is 74AC573. The device works with a voltage of 3.3V for its supply voltage. 20 pins are included. AC is the family name of this electronic device. There are 20 pins on it. The electronic part is mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. There are 8 input lines in which electronic circuits are present. The reliability of this device makes it well suited to TR. With an output current of 24mA, it is highly flexible in terms of design. A binary equivalent of the input line is generated by the 3 output lines. Without external influences, it consumes 8μA of quiescent current. CD74AC573M96 Features20-SOIC (0.295, 7.50mm Width) package 74AC series 8 Bits 74AC573 family 20 pin count 20 pins CD74AC573M96 ApplicationsThere are a lot of Texas Instruments CD74AC573M96 Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ABT373N OverviewA package called 20-DIP (0.300, 7.62mm) contains it. The package is in the form of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Through Hole. There is no supply voltage for this device. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74ABT family. This electronic part is designed with 8 Bits. A device with this design has 20 terminations. It is a member of the 74ABT373 family. A 5V voltage supply is required for operation. 20 pins are available on it. It is a member of the ABT family of electronic devices. The 20 pins are designed into it. Mounting this electronic component follows the Through Hole method. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. As the output current is 64mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Aquiescent current is consumed by 24mA without being affected by external forces. Its maximum current supply (ICC) reaches 30mA. SN74ABT373N Features20-DIP (0.300, 7.62mm) package 74ABT series 8 Bits 74ABT373 family 20 pin count 20 pins 5V power supplies SN74ABT373N ApplicationsThere are a lot of Texas Instruments SN74ABT373N Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LVTH373DWR Overview20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Surface Mount. A 2.7V~3.6V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74LVTH family. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. The family in which it belongs to is 74LVTH373. With a supply voltage of 3.3V, it operates. There are 20 pins attached to it. In terms of electronic devices, this one is in the LVT family. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. During this period, the maximum supply voltage (Vsup) reaches 3.6V. Ensure that the supply voltage (Vsup) is greater than 2.7V. Based on its reliable performance, this device is appropriate for TR. Due to its 64mA output current, it offers maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. A total of 1 elements make up this object. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 5mA. SN74LVTH373DWR Features20-SOIC (0.295, 7.50mm Width) package 74LVTH series 8 Bits 74LVTH373 family 20 pin count 20 pins 1 elements SN74LVTH373DWR ApplicationsThere are a lot of Texas Instruments SN74LVTH373DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT75E OverviewA package called 16-DIP (0.300, 7.62mm) contains it. It is packaged in the way of Tube. There is a Differential output configured. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. The supply voltage of the device is 4.5V~5.5V. A temperature of -55°C~125°C is used for operation. An FPGA in this series belongs to the 74HCT family. There are 4 bits in this electronic part. This device has 16 terminations. The family 74HCT75 includes it. In order to function, the supply voltage should be set to 5V. The device is equipped with 16 pins. It is a member of the HCT family of electronic devices. With the design of the board, there are only 16 pins. Through Hole is the way in which this electronic part is mounted. Subcategory FF/Latch includes this part. A total of 5V power supplies are required for it to operate. Due to its 4mA output current, it offers maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The binary equivalent of the input line is generated by 4 output lines. The quiescent current consumed by it is 4μA because it is unaffected by external factors. This element consists of 2. CD74HCT75E Features16-DIP (0.300, 7.62mm) package 74HCT series 4 Bits 74HCT75 family 16 pin count 16 pins 5V power supplies 2 elements CD74HCT75E ApplicationsThere are a lot of Texas Instruments CD74HCT75E Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74ACT373M96 OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -55°C~125°C. 74ACT is the series number of this FPGA. An electronic part with 8 bits is designed. A device with this design has 20 terminations. It belongs to 74ACT373 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of ACT. It is designed with 20 pins. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. Subcategory FF/Latches contains this part. There is 5V power supply for it. It consists of 8 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for TR. With 24mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage. The quiescent current consumed by it is 8μA because it is unaffected by external factors. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA. CD74ACT373M96 Features20-SOIC (0.295, 7.50mm Width) package 74ACT series 8 Bits 74ACT373 family 20 pin count 20 pins 5V power supplies CD74ACT373M96 ApplicationsThere are a lot of Texas Instruments CD74ACT373M96 Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALS373ADBR OverviewThe package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). This package has the format of Cut Tape (CT). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The operating temperature is 0°C~70°C. An FPGA of this type belongs to the 74ALS series. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. The family 74ALS373 includes it. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is a member of the ALS family of electronic devices. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. This device is well suited for TR based on its reliable performance. With 24mA, maximum design flexibility is ensured. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are no external factors that affect it, so it consumes 17mA quiescent current. Maximum power supply (ICC) for its operation is 27mA. SN74ALS373ADBR Features20-SSOP (0.209, 5.30mm Width) package 74ALS series 8 Bits 74ALS373 family 20 pin count 20 pins 5V power supplies SN74ALS373ADBR ApplicationsThere are a lot of Texas Instruments SN74ALS373ADBR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY74FCT2573TSOCT OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. In the 74FCT series, this FPGA is located. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74FCT2573. The supply voltage of the device is 5V. It has 20 pins that makes it easy to use. It is a member of the FCT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TR. With 12mA, maximum design flexibility is ensured. High efficiency requires a voltage supply of 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 100μA of quiescent current without being affected by outside factors. There are 1 elements in it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.2mA. CY74FCT2573TSOCT Features20-SOIC (0.295, 7.50mm Width) package 74FCT series 8 Bits 74FCT2573 family 20 pin count 20 pins 5V power supplies 1 elements CY74FCT2573TSOCT ApplicationsThere are a lot of Texas Instruments CY74FCT2573TSOCT Latches applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M74HC373RM13TR OverviewA package called 20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. The voltage supply is 2V~6V. During operation, the temperature is set at -55°C~125°C. An FPGA of this type belongs to the 74HC series. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. M74HC373 is its family. The supply voltage of the device is 4.5V. The 20 pind are equipped with it. It is part of the family of electronic devices called HC/UH. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 6V. The device is powered by 2/6V power supplies. A voltage greater than 2V must be supplied as a power supply (Vsup). Based on its reliable performance, this device is well suited to TAPE AND REEL. Its 7.8mA output current allows for maximum design flexibility. The binary equivalent of the input line is generated by 3 output lines. Without external influences, it consumes 4μA quiescent current. To achieve its exceptional flexibility, it relies on 8 circuits. M74HC373RM13TR Features20-SOIC (0.295, 7.50mm Width) package 74HC series 8 Bits M74HC373 family 20 pin count 20 pins 2/6V power supplies M74HC373RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC373RM13TR Latches applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY74FCT573TQCT OverviewIn the 20-SSOP (0.154, 3.90mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 4.75V~5.25V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74FCT series. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74FCT573 family, it falls under that category. With a supply voltage of 5V, it operates. 20 pins are provided. It is a member of the FCT family of electronic devices. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. The system is powered by 5V sources. Its reliable performance makes it an excellent choice for TR. The output current of 64mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. 8 output lines provide binary equivalents of input lines. There are no external factors that affect it, so it consumes 100μA quiescent current. There are 1 elements in it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.2mA. CY74FCT573TQCT Features20-SSOP (0.154, 3.90mm Width) package 74FCT series 8 Bits 74FCT573 family 20 pin count 20 pins 5V power supplies 1 elements CY74FCT573TQCT ApplicationsThere are a lot of Texas Instruments CY74FCT573TQCT Latches applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
