Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | BQ24901PWG4 OverviewIt comes in the package?of a Tube. The 14-TSSOP (0.173, 4.40mm Width) package includes it as a convenience.Mounting type is Surface Mount.The best thing to do is to set the temperature to -20°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, there is a requirement for Constant - Programmable current.It is possible to find the related parts of this device by looking at its base part number BQ24901.It has 14 terminations.There are 14 pins on the circuit board.This feature allows for programmability, such as Current, Timer.The device has a maximum charging current of 30mA.It operates on the basis of 14 pins.It appears that there are 2 channels available at this time.A 6V battery should be sufficient.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.80mA is the output current during the operation.Devices in this category are classified as Power Management Circuits.It was determined during the design process that Vsup (maximum supply voltage) should be set to 2mA.There is a 3V volt minimum input voltage requirement.It is recommended that the supply voltage be set to 11.5V for maximum efficiency.The supply voltage (Vsup) should be kept above 3V for normal operation. BQ24901PWG4 Features2 channels Power Management Circuits subcategory 14-TSSOP (0.173, 4.40mm Width) package BQ24901PWG4 ApplicationsThere are a lot of Texas Instruments BQ24901PWG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3947ISDX-09/NOPB OverviewThe package that has it is the Tape & Reel (TR) package.With this item, there is a 14-WFDFN Exposed Pad package that comes with it.A mounting type of Surface Mount has been specified for this device.This is the right thing to do: set the temperature to -40°C~85°C TA.To charge the device, Constant - Programmable current is required.By using the base part number LP3947, related parts can be found for this device.I have found that the number of terminations found in it as a whole is 14.There is a setting of 4.1V for the battery pack.In order for it to work, it requires 14 pins.In order to run it, you would need a battery with 5V.Applied input voltage of 6V does not damage the device.When the operation is completed, the output current is 750mA.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 4.3VV.Aligning it with Surface Mount is required for mounting.It is set to 5V when it comes to the power supply for the part. LP3947ISDX-09/NOPB FeaturesBattery pack voltage of 4.1V Power Management Circuits subcategory 14-WFDFN Exposed Pad package LP3947ISDX-09/NOPB ApplicationsThere are a lot of Texas Instruments LP3947ISDX-09/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24730RGFT OverviewIt comes in the package?of a Tape & Reel (TR). An included version of it is available in the package 40-VFQFN Exposed Pad.Mounting type is Surface Mount.Keeping the temperature at -40°C~85°C TA will ensure reliable performance.In order for this device to function, it utilizes an analog integrated circuit called BATTERY CHARGE CONTROLLER.It is necessary to supply the device with Constant - Programmable current in order to charge it.Identify its related parts based on the base part number BQ24730.In total, there are 40 terminations.There are 40 pins on it.Features such as Current are programmable.For the product to work correctly, 40 pins are required, and a connection to each pin is required.If the supply voltage exceeds 24V, the device will not function properly.When the output voltage is 16.8V, high efficiency is possible.When the operation is completed, the output current is 4.5mA.A power supply voltage as low as 0V can be used for it and it will work as well as possible.It is mounted in the manner of Surface Mount.Voltage input for the device is 16.8V.Additional features of ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8 can also be generated by the device.This part has a maximum switching frequency of 345kHz. BQ24730RGFT FeaturesAddtional features of ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8 40-VFQFN Exposed Pad package BQ24730RGFT ApplicationsThere are a lot of Texas Instruments BQ24730RGFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3918TLX/NOPB OverviewIt is contained in the package Tape & Reel (TR).The 25-WFBGA package includes it as a convenience.A mounting type of Surface Mount has been specified for this device.This is the right thing to do: set the temperature to -40°C~85°C TA.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.By using the base part number LP3918, related parts can be found for this device.The number of terminations found in it is 25 as a whole.It is a 4.2V voltage for the battery pack.The device consists of 25 pins, which are arranged in a row.There is 950mA maximum charging current listed on the device.In order for the product to function as intended, there are 25 pins that must be connected.The system currently provides 1 channels for the user to use.There is a maximum voltage of 6V for the device.Batteries with 5V should be able to power it.Devices belonging to subcategory Power Management Circuits include this device.In order to mount it, it has to align itself with Surface Mount.A power supply setting of 0 has been assigned to the part.Additional features of RESTART THRESHOLD VOLTAGE IS 4.05 VOLT can also be generated by the device. LP3918TLX/NOPB FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of RESTART THRESHOLD VOLTAGE IS 4.05 VOLT 25-WFBGA package LP3918TLX/NOPB ApplicationsThere are a lot of Texas Instruments LP3918TLX/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC3906QTR OverviewIn the Tape & Reel (TR) package, you will find it.With this item, there is a 20-LCC (J-Lead) package that comes with it.It appears that the device's mounting type is Surface Mount.The best way to adjust the temperature is to set it to 0°C~70°C TA.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Parts related to the base part number UC3906 can be found based on that number.There are no terminations in it at all.A total of 20 pins are present on it.This device has a number of programmable features, including Current.This product requires that a total of 20 pins be connected in order for it to work correctly.In total, this application supports 1 channels.Battery voltage should be 10V.40V supply voltage is not a problem for it.A 2A output current is used for operation.The device falls under the Power Management Circuits subcategory.In order to ensure optimum supply voltage, the maximum voltage setting is set to 2.7mA.It is recommended that the supply voltage (Vsup) be kept above 5V in order to maintain normal operation. UC3906QTR Features1 channels Power Management Circuits subcategory 20-LCC (J-Lead) package UC3906QTR ApplicationsThere are a lot of Texas Instruments UC3906QTR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC3906QTRG3 OverviewYou can find it in the Tape & Reel (TR) package.In order to make it more convenient, it has been included in the 20-LCC (J-Lead) package.Mounting type Surface Mount matches the device.It is recommended to set the temperature to 0°C~70°C TA for reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.This device's related parts can be found under the base part number UC3906.There are 20 terminations in it.In addition, it is equipped with 20 pins.Serveral programmable features like Current.For the product to work properly, 20 pins must be connected in order to make it work.There are a total of 1 channels available for your use.This should be able to operate off of a battery that has a voltage of 10V.This device can be operated at an input voltage of 40V without being damaged.During operation, 2A represents the output current.The device falls under the Power Management Circuits subcategory.During the design process, Vsup (maximum supply voltage) was set to 3.3mA.It is set to 10V when it comes to the power supply for the part.If the supply voltage (Vsup) is kept above 5V, the device will be able to operate normally. UC3906QTRG3 Features1 channels Power Management Circuits subcategory 20-LCC (J-Lead) package UC3906QTRG3 ApplicationsThere are a lot of Texas Instruments UC3906QTRG3 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC2909DWG4 OverviewThere is a package called Tube that contains this item.The 20-SOIC (0.295, 7.50mm Width) package includes it as a convenience.The mounting type of the device is Surface Mount.Setting the temperature to -40°C~85°C TA is the right thing to do.Analog IC BATTERY CHARGE CONTROLLER is responsible for implementing the device.The device requires Constant - Programmable of current to charge.It is possible to find the related parts to the base part number UC2909.A total of 20 terminations can be found in it.There are 20 pins on the circuit board.It requires pins 20 to function.In order to run it, you would need a battery with 15V.An input voltage that is equal to 40V can be applied to it without any problem.In order to operate, it must have a current of 100mA at the output.There is a subcategory of Power Management Circuits for this device.It is capable of functioning at a voltage as low as possible, for example 7.5V voltage for this circuit is used.In most cases, the maximum supply voltage (Vsup) is set to 19mA.It is set to 15V when it comes to the power supply for the part.A 15V input voltage is applied to the device.This part has a maximum switching frequency of 242kHz.To meet operation conditions, the maximum output current is reduced to 4.5mA. UC2909DWG4 FeaturesPower Management Circuits subcategory 20-SOIC (0.295, 7.50mm Width) package UC2909DWG4 ApplicationsThere are a lot of Texas Instruments UC2909DWG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC3909NG4 OverviewIt is included in the Tube package. For convenience, it is included in the 20-DIP (0.300, 7.62mm) package.Device mounting type Through Hole is specified.If you wish to ensure reliable performance, set the temperature to 0°C~70°C TA.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.To charge the device, you need Constant - Programmable current.Parts related to the base part number UC3909 can be found based on that number.It is possible to find a total of 20 terminations.The device has a total of 20 pins.To operate the product, it is necessary that 20 pins be inserted into the device.Using a 15V battery should be enough to run it.Withstanding a voltage of 40V, it is a reliable piece of equipment.There is a constant output current of 2A when it is operating.There is one subcategory of this device, and it is Power Management Circuits.It can function at as low a supply voltage as possible, such as 7.5V.19mA is set for Vsup (maximum supply voltage).The part's power supply is set to a value of 15V.It can be seen that the device has an input voltage of 15V.242kHz switching frequency is used by the part.It is important to note that during operation, the maximum output current is reduced to 4.5mA. UC3909NG4 FeaturesPower Management Circuits subcategory Switching frequency of 242kHz 20-DIP (0.300, 7.62mm) package UC3909NG4 ApplicationsThere are a lot of Texas Instruments UC3909NG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3956DWG4 OverviewThis item can be found in the Tube package.It is contained in a package named 20-SOIC (0.295, 7.50mm Width).Mounting type is Surface Mount.Keeping the temperature at 0°C~70°C TA is the right choice.It functions by using an analog IC called BATTERY CHARGE CONTROLLER.The device requires Constant - Programmable current to charge.The base part number UCC3956 represents its related parts.As far as the terminations are concerned, there are 20.The device has 20 pins in total.There are 20 pins required in order for the product to function.Devices with a maximum supply voltage of 18V are preferred.A 12V battery should be sufficient.With a 20V supply voltage, it is capable of withstanding the operation of the device.With a 4.1V output voltage, high efficiency is possible.A device of this type will have its output current set to 120mA in this case.The device you are looking at belongs to the subcategory of Power Management Circuits.There is 8mA voltage set in Vsup (maximum supply voltage).When it comes to the part's power supply, it is set to 12V.It can be seen that the device has an input voltage of 12V.In this particular part, the switching frequency is set to 110kHz. UCC3956DWG4 FeaturesPower Management Circuits subcategory Switching frequency of 110kHz 20-SOIC (0.295, 7.50mm Width) package UCC3956DWG4 ApplicationsThere are a lot of Texas Instruments UCC3956DWG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24740RHDTG4 OverviewThis can be found in the Tape & Reel (TR) package.A 28-VFQFN Exposed Pad package is included with this item as part of its contents.The device is mounted with mounting type Surface Mount.Keeping the temperature at -40°C~125°C TJ is the right choice.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.Charge the device with Constant - Programmable current.With the base part number BQ24740, it is possible to find related parts.As a whole, it contains 28 terminations.There is a voltage of 18V Max for the battery pack as well.28 pins are attached to it.For the product to work properly, 28 pins must be connected in order to make it work.The number of channels available is 1.Batteries with 20V should be able to power it.As long as the supply voltage is 24V, it is capable of withstanding the voltage.A 18V output voltage provides high efficiency.There is a constant output current of 10A when it is operating.Devices in this category are classified as Power Management Circuits.A power supply voltage as low as 5V can be used for it and it will work as well as possible.Amounting is in line with Surface Mount.As far as switching frequency is concerned, the part runs at 300kHz. BQ24740RHDTG4 FeaturesBattery pack voltage of 18V Max 1 channels Power Management Circuits subcategory Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24740RHDTG4 ApplicationsThere are a lot of Texas Instruments BQ24740RHDTG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24055DSST OverviewThe package Tape & Reel (TR) contains it, and you can find it there.With this item, there is a 12-WFDFN Exposed Pad package that comes with it.Device mounting type Surface Mount is specified.If you wish to ensure reliable performance, set the temperature to 0°C~125°C TJ.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.Identify its related parts based on the base part number BQ24055.As you can see, it has 12 terminations in it.A total of 12 pins are present on it.Several programmable features, including Current.There are 12 pins necessary to make it work.Channels are available in an amount of 1.This should be able to operate off of a battery that has a voltage of 5V.Withstanding a voltage of 6.45V, it is a reliable piece of equipment.Having the output voltage set to 4.2V may result in high efficiency.When the operation is completed, the output current is 800mA.This device is classified as Power Management Circuits under the subcategory.This circuit can function at a low supply voltage, such as 4.75VV.A minimum input voltage of 3.5V volts is required for this device.This gadget's power supply has a current of 800mA flowing through it.This device can accept up to 28V volts of input voltage.This operation requires a voltage of 4.2V as the maximum output supply voltage. BQ24055DSST Features1 channels Power Management Circuits subcategory 12-WFDFN Exposed Pad package BQ24055DSST ApplicationsThere are a lot of Texas Instruments BQ24055DSST Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24742RHDR OverviewThere is a package for Tape & Reel (TR) in which it can be found.The 28-VFQFN Exposed Pad package includes it as a convenience.In this case, the device is mounted in the way of Surface Mount.Keeping the temperature at -40°C~125°C TJ will ensure reliable performance.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.In order to charge the device, it needs to receive Constant - Programmable current.Based on the base part number BQ24742, it is possible to find related parts for this device.28 terminations are present.It is 18.048V Max for the battery pack.This board has 28 pins, making it very simple to construct.In order for the product to function as intended, there are 28 pins that must be connected.In total, this application supports 1 channels.Battery voltage should be 20V.It is capable of withstanding a 24V supply voltage.When the output voltage is 18.048V, high efficiency is possible.During operation, 10A represents the output current.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 9V voltage for this circuit is used.A mounting requires that it align itself with Surface Mount.As far as switching frequency is concerned, the part runs at 800kHz. BQ24742RHDR FeaturesBattery pack voltage of 18.048V Max 1 channels Power Management Circuits subcategory Switching frequency of 800kHz 28-VFQFN Exposed Pad package BQ24742RHDR ApplicationsThere are a lot of Texas Instruments BQ24742RHDR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3658SDX-A OverviewIt is contained in the package Tape & Reel (TR).For convenience, it is included in the 10-WFDFN Exposed Pad package.It appears that the device's mounting type is Surface Mount.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.To charge the device, Constant - Programmable current is required.Parts related to the base part number LM3658 can be found based on that number.It contains 10 terminations, so that is how many there are.The device has 10 pins in total.As long as it is charged at maximum current, it will be rated as 1A.It operates on the basis of 10 pins.It is possible to access 1 channels.This should be able to operate off of a battery that has a voltage of 5V.In the case of 4.2V, the output voltage is likely to produce high efficiency.The output current is set to 1A in this case.This device is a member of subcategory Power Management Circuits.As far as the mounting is concerned, it is mounted in the way of Surface Mount.A power supply setting of 0 has been assigned to the part.It is recommended that the supply voltage be set to 6V for maximum efficiency.During normal operation, Vsup should remain above 4.5V.In addition to the features above, the device can also generate the following features of RESTART THRESHOLD VOLTAGE IS 4 VOLT. LM3658SDX-A Features1 channels Power Management Circuits subcategory Addtional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT 10-WFDFN Exposed Pad package LM3658SDX-A ApplicationsThere are a lot of Texas Instruments LM3658SDX-A Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3622MX-8.2/NOPB OverviewIt is included in the Tape & Reel (TR) package. The product comes in the package of a 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the device.To ensure reliable performance, the temperature should be set to -20°C~70°C TA.In order for this device to function, it utilizes an analog integrated circuit called BATTERY CHARGE CONTROLLER.For the device to be charged, there is Constant current required.With the base part number LM3622, it is possible to find related parts.It contains 8 terminations.Pins 8 are included.To operate the product, it is necessary that 8 pins be inserted into the device.A supply voltage of no more than 24V is required for the device to operate properly.As long as the output voltage is set to 8.2V, then there is a possibility of optimal efficiency being achieved.The output current is set to 25mA in this case.There is one subcategory of this device, and it is Power Management Circuits.This circuit can function at a low supply voltage, such as 4.5VV.As far as the mounting is concerned, it is mounted in the way of Surface Mount.The device has an input voltage of 5V. LM3622MX-8.2/NOPB FeaturesPower Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package LM3622MX-8.2/NOPB ApplicationsThere are a lot of Texas Instruments LM3622MX-8.2/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3658SD-B OverviewThe Tape & Reel (TR) package contains it.There is a 10-WFDFN Exposed Pad package included with this item that you will need to take care of.In this case, the device is mounted in the way of Surface Mount.The temperature should be set to -40°C~85°C TA to ensure reliable performance.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.A charge of Constant - Programmable current is required to be applied to the device.Parts related to the base part number LM3658 can be found based on that number.The number of terminations found in it is 10 as a whole.There are 10 pins on the circuit board.In order for the product to be functional, it requires that you connect the 10 pins according to the instructions.There are a total of 1 channels available for use in this application.It should be possible to run it from a 5V battery it should be able to run at all times.It is important that the supply voltage does not exceed 6V for the device to work properly.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.The operation is performed with an output current of 1A.This device is a member of subcategory Power Management Circuits.A supply voltage of 4.35V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.The part's power supply is set to 5V.This device can accept voltages up to 0 volts as an input voltage.Additionally, RESTART THRESHOLD VOLTAGE IS 4 VOLT can be generated by the device.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.2V.To meet operation conditions, the maximum output current is reduced to 1A. LM3658SD-B Features1 channels Power Management Circuits subcategory Addtional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT 10-WFDFN Exposed Pad package LM3658SD-B ApplicationsThere are a lot of Texas Instruments LM3658SD-B Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3420AM5-8.4 OverviewThe Tape & Reel (TR) package contains it.Among the packages that come with this product, there is one that is SC-74A, SOT-753.Surface Mount is the mounting type of the device.Keeping the temperature at -40°C~85°C TA is the right choice.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.With the base part number LM3420, it is possible to find related parts.5 terminations are present.It is equipped with 5 pins.In terms of maximum charging current, it is rated at 1A.The operation?are 5 pins.Currently, there are a total of 1 channels available for use in the application.It can be powered by a battery with 8.4V.In the case of 8.4V, the output voltage is likely to produce high efficiency.There is 15mA output current when the device operates.There is one subcategory of this device, and it is Power Management Circuits.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.For best efficiency, set the supply voltage to 20V. LM3420AM5-8.4 Features1 channels Power Management Circuits subcategory SC-74A, SOT-753 package LM3420AM5-8.4 ApplicationsThere are a lot of Texas Instruments LM3420AM5-8.4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3947ISD-09 OverviewThere is a package for Tape & Reel (TR) in which it can be found.There is a 14-WFDFN Exposed Pad package that comes with this item.There is a type of mounting for this device: Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.If you use the base part number LP3947, you can look for related parts.The number of terminations found in it is 14 as a whole.In the battery pack, the voltage is 4.1V.Due to the 14 pins on it, it is a very simple circuit.In order for the product to be functional, it requires that you connect the 14 pins according to the instructions.There are a total of 1 channels available for your use.The maximum supply voltage of the device is 6V.It should be possible to run it from a 5V battery it should be able to run at all times.If the supply voltage exceeds 6V, the device will not function properly.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.2V.The operation is carried out with an output current of 750mA.Devices in this category are classified as Power Management Circuits.It can function at as low a supply voltage as possible, such as 4.3V.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.The part's power supply is set to a value of 5V.In the course of operation, the maximum output current is reduced to 750mA. LP3947ISD-09 FeaturesBattery pack voltage of 4.1V 1 channels Power Management Circuits subcategory 14-WFDFN Exposed Pad package LP3947ISD-09 ApplicationsThere are a lot of Texas Instruments LP3947ISD-09 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3947ISD-51 OverviewThere is a package called Tape & Reel (TR) that contains this item.The package 14-WFDFN Exposed Pad includes a version of it.There is a type of mounting for this device: Surface Mount.It is best to set the temperature to -40°C~85°C TA.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.Device charging requires Constant - Programmable current.This part number LP3947 can be used to find its related parts.It is possible to find a total of 14 terminations.For the battery pack, it is set to 4.2V.There are 14 pins on it, so it has a very simple design.This product requires that a total of 14 pins be connected in order for it to work correctly.There are 1 channels available.The device should operate on a 5VV battery.To ensure the device works properly, the supply voltage should not exceed 6V.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.With a 750mA output current, the operation is conducted.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 4.3V voltage for this circuit is used.It is mounted in the manner of Surface Mount.There is 5V power supply set for the part.6V is the maximum input voltage it can handle.As a maximum output supply voltage for this operation, the voltage must be set to 4.263V.A reduction in maximum output current to 750mA occurs during operation. LP3947ISD-51 FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 14-WFDFN Exposed Pad package LP3947ISD-51 ApplicationsThere are a lot of Texas Instruments LP3947ISD-51 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24260SYFFT OverviewIt is included in the Tape & Reel (TR) package for convenience.An included version of it is available in the package 36-UFBGA, DSBGA.This device is mounted using type Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.Constant - Programmable current is required to charge the device.Based on the base part number BQ24260, its related parts can be identified.There is 3.6V voltage in the battery pack.There are various programmable features, such as Current.According to the specifications, it should be rated at 3A when charging at maximum power.Devices require 10V as their maximum supply voltage. BQ24260SYFFT FeaturesBattery pack voltage of 3.6V 36-UFBGA, DSBGA package BQ24260SYFFT ApplicationsThere are a lot of Texas Instruments BQ24260SYFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC34675AEPR2 OverviewThe Tape & Reel (TR) package contains it.The product comes in the package of a 8-UFDFN Exposed Pad.There is a mounting type Surface Mount specified for the device.It is recommended to set the temperature to -40°C~85°C TA for reliable performance.This device makes use of an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT.It is necessary to supply the device with Constant - Programmable current in order to charge it.Based on the base part number MC34675, its related parts can be identified.As far as the terminations are concerned, there are 8.This battery pack has a voltage of 4.2V.As far as the charging current is concerned, it is 1A at full charge.The total number of channels that can be accessed by users is 1.In order to operate, devices need a maximum supply voltage of 0 volts.It can be powered by a battery with 5V.This device is a member of subcategory Power Management Circuits.Regarding the power supply for the part, it is set to 5V. MC34675AEPR2 FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 8-UFDFN Exposed Pad package MC34675AEPR2 ApplicationsThere are a lot of NXP USA Inc. MC34675AEPR2 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9468UKZ OverviewIt comes in the package?of a Bulk. PCA9468UKZ FeaturesPCA9468UKZ ApplicationsThere are a lot of NXP USA Inc. PCA9468UKZ Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | MC34671AEP OverviewIt provides its functionality by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available.Batteries with 5V should be able to power it.The device you are looking at belongs to the subcategory of Power Management Circuits.5V is the power supply setting for the part.For normal operation, the supply voltage (Vsup) should be greater than 2.6V. MC34671AEP Features1 channels Power Management Circuits subcategory MC34671AEP ApplicationsThere are a lot of NXP Semiconductors MC34671AEP Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | Battery management Charge mgnt contr |
10000
In-stock
|
Get Quote | |||
APS | MCP73833-AMI/MF OverviewYou can find it in the Tube package.In order to make it more convenient, it has been included in the 10-VFDFN Exposed Pad package.In this case, the device has a mounting type of Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The device requires Constant - Programmable of current to charge.This device's related parts can be found under the base part number MCP73833.A total of 10 terminations can be found in it.A battery pack is going to have a voltage of 4.2V.In total, it has 10 pins.In addition to Current, a variety of programmable features are available.It is rated at 1.1A at maximum charging current.In order for the product to be functional, it requires that you connect the 10 pins according to the instructions.In total, this application supports 1 channels.The battery would need to have a voltage of 5.2V for the device to work.As long as the supply voltage is 6V, it is capable of withstanding the voltage.When the output voltage is 4.5V, high efficiency is possible.A 1.2A output current is used for operation.The device falls under the Power Management Circuits subcategory.This device can work at as low a voltage as possible, such as 3.75V.Aligning it with Surface Mount is required for mounting.In most cases, the maximum supply voltage (Vsup) is set to 3mA.There is 3.8/5.5V power supply set for the part.It is important to note that the maximum output supply voltage for this operation must be set to 4.533V.It is important to note that during operation, the maximum output current is reduced to 1A. MCP73833-AMI/MF FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73833-AMI/MF ApplicationsThere are a lot of Microchip Technology MCP73833-AMI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73223-C2SI/MF OverviewThere is an Tube package that contains it. For convenience, it is included in the 10-VFDFN Exposed Pad package.Mounting type Surface Mount matches the device.The correct temperature setting is -40°C~85°C TA.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.Parts related to the base part number MCP73223 can be found based on that number.In total, there are 10 terminations.It has a total of 10 pins on it.It is possible to program features such as Current, Timer.There are 10 pins necessary to make it work.Currently, there are 1 available channels.Those devices that have a maximum supply voltage of 16V are recommended for use.In order to run it, you would need a battery with 4.6V.An input voltage that is equal to 13V can be applied to it without any problem.The 7.2V output voltage allows for high efficiency.In order to operate, it must have a current of 1.1A at the output.This device belongs to the subcategory of Power Management Circuits.A power supply voltage as low as 4.2V can be used for it and it will work as well as possible.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.A 700μA supply current is set on the gadget.This device can accept up to 18V volts of input voltage.The maximum output supply voltage is reduced to 7.243V to fulfill the operation requirements.A reduction in maximum output current to 1.1A occurs during operation. MCP73223-C2SI/MF Features1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73223-C2SI/MF ApplicationsThere are a lot of Microchip Technology MCP73223-C2SI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ25071DQCT OverviewThe Tape & Reel (TR) package contains it.For convenience, it is included in the 10-WFDFN Exposed Pad package.Mounting type for the device is Surface Mount.The correct temperature setting is -40°C~85°C TA.In order for this device to function, it utilizes an analog integrated circuit called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.If you use the base part number BQ25071, you can look for related parts.It contains a total of 10 terminations.In the case of the battery pack, it is 3.5V.This product requires that a total of 10 pins be connected in order for it to work correctly.Channels are available in a total of 1.If it runs off of a 4.5V battery, then it should be able to run continuously.With a 10.2V supply voltage, it is capable of withstanding the operation of the device.In the case of 7V output voltage, there is a possibility of optimal efficiency.50mA is the output current during the operation.At a low supply voltage, such as 3.75V, it can operate to the best of its ability.A mounting requires that it align itself with Surface Mount.This gadget's power supply has a current of 1A flowing through it.In addition to the features above, the device can also generate the following features of RECHARGE DETECTION THRESHOLD IS 3.3V. BQ25071DQCT FeaturesBattery pack voltage of 3.5V 1 channels Addtional features of RECHARGE DETECTION THRESHOLD IS 3.3V 10-WFDFN Exposed Pad package BQ25071DQCT ApplicationsThere are a lot of Texas Instruments BQ25071DQCT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73844-840I/MS OverviewThere is a package Tube available.In order to make it more convenient, it has been included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.This device has a mounting type of Surface Mount.The temperature should be set to -40°C~85°C TA to ensure reliable performance.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.According to the base part number MCP73844, its related parts can be found.8 terminations are present.It has a total of 8 pins on it.This feature allows for programmability, such as Timer.You need 8 pins for it to work.A total of 2 channels are available.It should be able to run off of a 9.2V battery.This device can be operated at an input voltage of 12V without being damaged.The efficiency of the system can be maximized if the output voltage is 8.4V.The output current is set to 10mA in this case.There is a subcategory of Power Management Circuits for this device.This device can work at as low a voltage as possible, such as 8.7V.It is mounted in the way of Surface Mount.The supply of the gadget is running with 4mA current.This device can accept voltages up to 0 volts as an input voltage.To meet operation conditions, the maximum output current is reduced to 30mA. MCP73844-840I/MS Features2 channels Power Management Circuits subcategory 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package MCP73844-840I/MS ApplicationsThere are a lot of Microchip Technology MCP73844-840I/MS Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | A700V226M010ATE028 OverviewThe KEMET A700V226M010ATE028 Aluminum Organic Capacitor is a solid state aluminum capacitor. The cathode is a conductive organic polymer, which results in very low ESR and improved capacitance retention at high frequency. AO-CAPs may be operated at steady state voltages up to 100% of rated voltage without the need to de-rate. Since there is no liquid electrolyte, the A700 offers long operational lifetimes, low ESR, and high operational temperatures. The inherent low ESR renders the A700 suitable for high ripple current handling. The small package size, high ripple current capability, high operating temperature, low parasistics, and high capacitance makes the A700 ideal for high performance microprocessor, FPGA, and ASIC decoupling designs. A700V226M010ATE028 Features
A700V226M010ATE028 Applications
|
999
In-stock
|
Get Quote | |||
APS | MCP73213-A5JI/MF OverviewIt is available in the package Tube.To make it easier for you, it is included with the 10-VFDFN Exposed Pad package.Mounting type Surface Mount is chosen for the device.The best thing to do is to set the temperature to -40°C~85°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.To charge the device, Constant - Programmable current is required.Identify its related parts based on the base part number MCP73213.It contains a total of 10 terminations.8.8V is the voltage for the battery pack.The device indicates 1.1A charging current as its maximum.A total of 1 channels are available.Its maximum supply voltage is 13V.A battery with 0V would be enough for it to run. MCP73213-A5JI/MF FeaturesBattery pack voltage of 8.8V 1 channels 10-VFDFN Exposed Pad package MCP73213-A5JI/MF ApplicationsThere are a lot of Microchip Technology MCP73213-A5JI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24450DW OverviewThere is an Tube package that contains it. There is a 16-SOIC (0.295, 7.50mm Width) package that comes with this item.Device mounting type Surface Mount is specified.If the temperature is set to -40°C~70°C TJ, reliable performance will be assured.BATTERY CHARGE CONTROLLER is the analog IC used in this device.You can find this device's related parts by searching the base part number BQ24450.The overall number of terminations that can be found in it is 16 as a whole.In total, it has 16 pins.It is necessary to connect the 16 pins during the installation process of this product.The device can withstand a supply voltage of 40V.In order to operate, an output current of 2A is used.It can function at as low a supply voltage as possible, such as 5V.Input voltage must be at least 5V volts in order to function.A 10V input voltage is applied to the device.It is important to note that the maximum output supply voltage for this operation must be set to 2.6V. BQ24450DW Features16-SOIC (0.295, 7.50mm Width) package BQ24450DW ApplicationsThere are a lot of Texas Instruments BQ24450DW Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.