Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | BQ2057CDGK OverviewThe package that has it is the Tube package.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package included with this item that you will need to take care of.Amounting type Surface Mount is the one associated with the device.A temperature setting of -20°C~70°C TA ensures reliable performance.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.Device charging requires Constant - Programmable current.Parts related to the base part number BQ2057 can be found based on that number.As far as the terminations are concerned, there are 8.There are 8 pins on it.In addition to Current, a variety of programmable features are available.In order to operate it, it has 8 pins.The total number of channels that can be accessed by users is 1.Power can be provided by a battery with 5V.In order for the device to operate properly, the supply voltage should not exceed 15V.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.In this case, the output current of the device is set to 2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4.5V.Vsup (maximum supply voltage) is set in the command to 4mA.The input voltage is set to 4.5V volts. BQ2057CDGK Features1 channels Power Management Circuits subcategory 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package BQ2057CDGK ApplicationsThere are a lot of Texas Instruments BQ2057CDGK Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24075TRGTT OverviewThere is a package for Tape & Reel (TR) in which it can be found.There is currently a package available named 16-VFQFN Exposed Pad.There is a mounting type Surface Mount specified for the device.The correct temperature setting is 0°C~125°C TJ.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.Charge the device by providing it with Constant - Programmable current.This device's related parts can be found under the base part number BQ24075.As you can see, it has 16 terminations in it.A battery pack is going to have a voltage of 4.2V.It is equipped with 16 pins.Serveral programmable features like Current, Timer.The product is able to function with the help of 16 pins that are required.The number of available channels is 1.In theory, it should be able to run on a battery that has a voltage of 5VV.It is important that the supply voltage does not exceed 6.4V for the device to work properly.There is a possibility of high efficiency if the output voltage is set to 4.2V.In this case, the output current of the device is set to 1.5A.Subcategory 0 is home to this device.It can function at as low a supply voltage as possible, such as 4.35V.The part's power supply is set to 4.5/6.3V.There is a minimum input voltage of 4.3V volts.This gadget's power supply has a current of 1.5mA flowing through it.Furthermore, the device can generate DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED features as well.It is important to note that the maximum output supply voltage for this operation must be set to 5.6V.It is important to note that during operation, the maximum output current is reduced to 4.5A. BQ24075TRGTT FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED 16-VFQFN Exposed Pad package BQ24075TRGTT ApplicationsThere are a lot of Texas Instruments BQ24075TRGTT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2002CPN OverviewThis item can be found in the Tube package.An included version of it is available in the package 8-DIP (0.300, 7.62mm).Device mounting type Through Hole is specified.To ensure reliable performance, the temperature should be set to 0°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Constant Pulsed current is required to charge the device.A list of related parts can be found by searching for the base part number BQ2002.It contains 8 terminations, so that is how many there are.There are 8 pins on it.Features like Voltage can be programmed.There are 8 pins necessary to make it work.The total number of channels that can be accessed by users is 1.If it runs off of a 5V battery, then it should be able to run continuously.The device can withstand a supply voltage of 6V.During operation, 2A represents the output current.Devices in this category are classified as Power Management Circuits.A power supply voltage as low as 4V can be used for it and it will work as well as possible.0.5mA is set for Vsup (maximum supply voltage).It is set to 5V when it comes to the power supply for the part.Input voltage must be at least 4V volts in order to function.This gadget's power supply has a current of 500μA flowing through it.As a rule of thumb, the supply voltage needs to be set to 5V for optimum efficiency.The maximum input voltage is 6V volts.Voltage 2V is the maximum output voltage needed for this operation.In the course of operation, the maximum output current is reduced to 10mA. BQ2002CPN Features1 channels Power Management Circuits subcategory 8-DIP (0.300, 7.62mm) package BQ2002CPN ApplicationsThere are a lot of Texas Instruments BQ2002CPN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3947ISD-09/NOPB OverviewYou can find it in the Tape & Reel (TR) package.Among the packages that come with this product, there is one that is 14-WFDFN Exposed Pad.The device is mounted with mounting type Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Charge the device by providing it with Constant - Programmable current.Identify its related parts based on the base part number LP3947.There are no terminations in it at all.The battery pack has 4.1V.The device consists of 14 pins, which are arranged in a row.It is necessary to connect the 14 pins during the installation process of this product.This application has a total of 1 channels that can be used.If it runs off of a 5V battery, then it should be able to run continuously.This device can be operated at an input voltage of 6V without being damaged.High efficiency can be achieved with a 4.2V output voltage.The output current is set to 750mA in this case.Devices belonging to subcategory Power Management Circuits include this device.The device can operate at a voltage of 4.3V as low as possible.It is mounted in the way of Surface Mount.5V is the power supply setting for the part. LP3947ISD-09/NOPB FeaturesBattery pack voltage of 4.1V 1 channels Power Management Circuits subcategory 14-WFDFN Exposed Pad package LP3947ISD-09/NOPB ApplicationsThere are a lot of Texas Instruments LP3947ISD-09/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2002TPN OverviewThere is a package Tube available.In order to make it more convenient, it has been included in the 8-DIP (0.300, 7.62mm) package.There is a type of mounting for this device: Through Hole.The best thing to do is to set the temperature to 0°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.In order to charge the device, it needs to receive Constant Pulsed current.You can find this device's related parts by searching the base part number BQ2002.There are 8 terminations in it.There is a setting of 2V for the battery pack.The device has 8 pins in total.Several programmable features, including Voltage.To operate the product, it is necessary that 8 pins be inserted into the device.There are 1 channels available for this application.Batteries with 5V can be used to power it.With a 6V supply voltage, it is capable of withstanding the operation of the device.A 2A output current is used for operation.This device belongs to the subcategory of Power Management Circuits.The device can operate at a voltage of 4V as low as possible.It is set to 0.5mA for Vsup (maximum supply voltage).Regarding the power supply for the part, it is set to 5V.Voltage input must be at least 4V volts.There is 500μA current flowing through the gadget's supply.The best efficiency can be achieved by setting the supply voltage to 5V. BQ2002TPN FeaturesBattery pack voltage of 2V 1 channels Power Management Circuits subcategory 8-DIP (0.300, 7.62mm) package BQ2002TPN ApplicationsThere are a lot of Texas Instruments BQ2002TPN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC79050-4.2YMM OverviewIn the Tube package, you will find it.The package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) includes a version of it.The mounting type of the device is Surface Mount.Keeping the temperature at -40°C~125°C TJ will ensure reliable performance.To charge the device, there is a requirement for Constant Pulsed current.The base part number MIC79050 represents its related parts.In the case of the battery pack, it is 4.2V.It is necessary to connect the 8 pins during the installation process of this product.Those devices that have a maximum supply voltage of 16V are recommended for use.A 16V supply voltage can be applied to it.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.It is in this instance that the device's output current is set to 500mA.It is capable of functioning at a voltage as low as possible, for example 2.5V voltage for this circuit is used.Aligning it with Surface Mount is required for mounting.There is a supplier package of type 8-MSOP for this product.For reliability, it must operate at a temperature of -40°C degrees Celsius.In order to maintain reliable operations, 125°C°C is the maximum operating temperature. MIC79050-4.2YMM FeaturesBattery pack voltage of 4.2V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package MIC79050-4.2YMM ApplicationsThere are a lot of Microchip Technology MIC79050-4.2YMM Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MCP73833-NVI/MF OverviewThere is a package Tube available.For convenience, it is included in the 10-VFDFN Exposed Pad package.The device's mounting type is Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Providing Constant - Programmable current to the device is the only way to charge it.You can find this device's related parts by searching the base part number MCP73833.In total, there are 10 terminations.With 10 pins on it, it has a very simple design.You can program a number of features, including Current.It is listed on the device that it can charge at a maximum current of 1.1A.In order to operate it, it has 10 pins.The system currently provides 1 channels for the user to use.It should be able to run off a battery of 5.35V.It is crucial that the supply voltage of the device does not exceed 6V for the device to work properly.Ideally, when the output voltage of the device is set to 4.35V, you will be able to achieve the highest degree of efficiency.With an output current of 0, the operation is carried out.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 3.75VV.Aligning it with Surface Mount is required for mounting.It is set to 3mA for Vsup (maximum supply voltage).With respect to the power supply for the part, it is set to 3.8/5.5V.Supply current for the gadget is set to 2mA. MCP73833-NVI/MF Features1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73833-NVI/MF ApplicationsThere are a lot of Microchip Technology MCP73833-NVI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24130RHLT OverviewIt is included in the Digi-Reel? package for convenience.The package that is included with it comes in the shape of a 20-VFQFN Exposed Pad.There is a mounting type Surface Mount specified for the device.A temperature setting of -40°C~85°C TA ensures reliable performance.BATTERY CHARGE CONTROLLER is the analog IC used in this device.For the device to be charged, there is Constant - Programmable current required.Identify its related parts based on the base part number BQ24130.In total, there are 20 terminations.Batteries pack have 12.6V.There are 20 pins on it.There are 20 pins necessary to make it work.The board is capable of handling a voltage input of zero volts.In the case of 13.5V output voltage, there is a possibility of optimal efficiency.4A is the output current during the operation.Subcategory 0 is home to this device.The device can operate at a voltage of 4.5V as low as possible.Current is flowing through the gadget's supply at 4A volts.600kHz is the switching frequency of the part. BQ24130RHLT FeaturesBattery pack voltage of 12.6V Power Management Circuits subcategory Switching frequency of 600kHz 20-VFQFN Exposed Pad package BQ24130RHLT ApplicationsThere are a lot of Texas Instruments BQ24130RHLT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MCP73842-840I/UN OverviewThe Tube package contains it.The package that is included with it comes in the shape of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).There is a mounting type of Surface Mount for this device.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Identify its related parts based on the base part number MCP73842.Taking it as a whole, it has been concluded that there are 10 terminations to be found.The device has a total of 10 pins.Serveral programmable features like Timer.There are a total of 10 pins that have to be connected for the product to function correctly.Currently, there are 2 channels available.The device should operate on a 9.2VV battery.There is no damage to the device if an input voltage of 12V is applied.8.4V output voltages can result in high efficiency.The output current is set to 10mA in this case.This device belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 8.7V.It is mounted in the same way as Surface Mount.There is 4mA voltage set in Vsup (maximum supply voltage).The supply of the gadget is running with 750μA current.This device can accept up to 13.5V volts of input voltage.It is important to note that the maximum output supply voltage for this operation must be set to 8.442V.It is important to note that during operation, the maximum output current is reduced to 150mA. MCP73842-840I/UN Features2 channels Power Management Circuits subcategory 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package MCP73842-840I/UN ApplicationsThere are a lot of Microchip Technology MCP73842-840I/UN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2002DSN OverviewIt is contained in the package Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that comes with this item.Mounting type Surface Mount matches the device.This is the right thing to do: set the temperature to 0°C~70°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.The related parts of the base part number BQ2002 can be found by following the order of the base part number.In total, there are 8 terminations.The battery pack has 2V.Pins 8 are included.In addition to the standard features, a number of programmable functions are available to the user, such as Voltage.It requires pins 8 to function.There are 1 channels available.Power can be provided by a battery with 5V.It is crucial that the supply voltage of the device does not exceed 6V for the device to work properly.In this case, the output current of the device is set to 2A.This device is classified as Power Management Circuits under the subcategory.A power supply voltage as low as 4V can be used for it and it will work as well as possible.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.5mA.The power supply for this part is set to 5V.As far as the input voltage is concerned, it has a minimum of 4V volts.There is 500μA current flowing through the gadget's supply.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system. BQ2002DSN FeaturesBattery pack voltage of 2V 1 channels Power Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package BQ2002DSN ApplicationsThere are a lot of Texas Instruments BQ2002DSN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MCP73113T-06SI/MF OverviewIt is included in the Tape & Reel (TR) package. The package that is included with it comes in the shape of a 10-VFDFN Exposed Pad.A mounting type of Surface Mount has been specified for this device.The temperature should be set to -40°C~85°C TA to ensure reliable performance.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.In order to charge the device, it needs to receive Constant - Programmable current.If you use the base part number MCP73113, you can look for related parts.It has a total of 10 terminations.10 pins are attached to it.It is rated at 1.1A at maximum charging current.Product functionality is dependent on 10 pins.The total number of channels that can be accessed by users is 1.It should be able to run off of a 5.1V battery.There is no damage to the device if an input voltage of 6.5V is applied.The 4.2V output voltage allows for high efficiency.A device of this type will have its output current set to 1A in this case.This device is a member of subcategory Power Management Circuits.A supply voltage of 4.2V is suitable for it, because it can operate with a low supply voltage.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.5V is the power supply setting for the part.The gadget's supply current is set to 700μA. MCP73113T-06SI/MF Features1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73113T-06SI/MF ApplicationsThere are a lot of Microchip Technology MCP73113T-06SI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24745RHDRG4 OverviewThere is a package called Tape & Reel (TR) that contains this item.For convenience, it is included in the 28-VFQFN Exposed Pad package.A mounting type of Surface Mount has been specified for this device.It is best to set the temperature to -40°C~125°C TJ in order to prevent the system from overheating.It provides its functionality by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Charge the device by providing it with Constant - Programmable current.The base part number BQ24745 can be used to locate related parts for this device.It is possible to find a total of 28 terminations.A battery pack is going to have a voltage of 19.2V Max.The device consists of 28 pins, which are arranged in a row.On the device, it is listed as having a charge current of 8.064A.In order for the product to be functional, it requires that you connect the 28 pins according to the instructions.There are a total of 1 channels available for use in this application.Power can be provided by a battery with 20V.24V supply voltage is not a problem for it.Using a 19.2V output voltage results in high efficiency.In order to operate, it must have a current of 8A at the output.This device belongs to the subcategory of Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 7V voltage for this circuit is used.The input voltage is set to 7V volts.With 300kHz switching frequency, the part operates. BQ24745RHDRG4 FeaturesBattery pack voltage of 19.2V Max 1 channels Power Management Circuits subcategory Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24745RHDRG4 ApplicationsThere are a lot of Texas Instruments BQ24745RHDRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24185YFFT OverviewThere is a package for Tape & Reel (TR) in which it can be found.Located in package 25-UFBGA, DSBGA, it can be found there.Mounting type is Surface Mount.The best thing to do is to set the temperature to -30°C~85°C TA.Analog IC POWER SUPPLY MANAGEMENT CIRCUIT is responsible for implementing the device.If the device needs to be charged, it must be supplied with Constant - Programmable current.This part number BQ24185 can be used to find its related parts.There are no terminations in it at all.Batteries pack have 4.44V Max.25 pins are included in the package.The unit is equipped with a number of programmable features, including Timer.It is listed on the device that it can charge at a maximum current of 1.5A.Product functionality is dependent on 25 pins.It is possible to access 1 channels.Batteries with 5V can be used to power it.This device can be operated at an input voltage of 16V without being damaged.When the output voltage is 4.44V, high efficiency is possible.This device operates with a current output of 1.55A.It can function at as low a supply voltage as possible, such as 4V.It has a 4V volt minimum input voltage.The gadget's supply is running at 10mA volts.With 3MHz switching frequency, the part operates.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.44V.As a result of the reduction in maximum output current, the output current should be kept below 2A during operation. BQ24185YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Switching frequency of 3MHz 25-UFBGA, DSBGA package BQ24185YFFT ApplicationsThere are a lot of Texas Instruments BQ24185YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24750RHDTG4 OverviewIn the Tape & Reel (TR) package, you will find it.The package 28-VFQFN Exposed Pad includes a version of it.There is a type of mounting for this device: Surface Mount.It is best to set the temperature to -40°C~125°C TJ.In order to operate, the device relies on an analog IC named POWER SUPPLY MANAGEMENT CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.If you use the base part number BQ24750, you can look for related parts.28 terminations are present.Hence, the battery pack is at 18.048V Max when it comes to voltage.28 pins are included in the package.With maximum charging current, its rating is 10A.Product functionality is dependent on 28 pins.The system currently provides 1 channels for the user to use.With 20V, you can use a battery to power it.As long as the supply voltage is 24V, it is capable of withstanding the voltage.In the case of 2V, the output voltage is likely to produce high efficiency.It is performed with a current output of 1mA for the output of the operation.There is a subcategory of Power Management Circuits for this device.This device can work at as low a voltage as possible, such as 5V.It is mounted in the same way as Surface Mount.It is important to note that during operation, the maximum output current is reduced to 1mA. BQ24750RHDTG4 FeaturesBattery pack voltage of 18.048V Max 1 channels Power Management Circuits subcategory 28-VFQFN Exposed Pad package BQ24750RHDTG4 ApplicationsThere are a lot of Texas Instruments BQ24750RHDTG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24018DRCT OverviewThis item can be found in the Tape & Reel (TR) package.It can be found in package 10-VFDFN Exposed Pad.This device is mounted using type Surface Mount.It is recommended to set the temperature to -40°C~125°C TJ for reliable performance.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The device requires Constant - Programmable of current to charge.There are related parts to this device according to the base part number BQ24018.In total, there are 10 terminations.The device is equipped with a total of 10 pins.Current, Timer, for example, can be programmed.In order for it to work, it requires 10 pins.In total, this application supports 1 channels.It should be able to run off a battery of 4.5V.The board is capable of handling a voltage input of zero volts.The possibility of optimal efficiency exists if 4.36V output voltage is used as the output voltage.The operation is carried out with an output current of 1A.This device can work at as low a voltage as possible, such as 3V.Electric components from the bqTINY? series are included in this package.The input voltage is set to 3V volts.There is 1A current flowing through the gadget's supply.In order to comply with the constraints, the maximum output current is reduced to 1A. BQ24018DRCT Features1 channels 10-VFDFN Exposed Pad package BQ24018DRCT ApplicationsThere are a lot of Texas Instruments BQ24018DRCT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24292IRGET OverviewThis can be found in the Tape & Reel (TR) package.A 24-VFQFN Exposed Pad package is included with this item as part of its contents.The mounting type of the device is Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.By using the base part number BQ24292, related parts can be found for this device.24 terminations are present.There is 4.4V voltage in the battery pack.Several programmable features, including Current.There are 24 pins necessary to make it work.There are 1 channels available.An input voltage of 17V can be applied to the device without damage.In the case of a 3.65V output voltage, high efficiency is possible.In this case, the output current of the device is set to 4.5A.There is one subcategory of this device, and it is Power Management Circuits.At a low supply voltage, such as 3.9V, it can operate to the best of its ability.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3000mA.This gadget's power supply has a current of 3A flowing through it.It operates at a switching frequency of 1.5MHz. BQ24292IRGET FeaturesBattery pack voltage of 4.4V 1 channels Power Management Circuits subcategory Switching frequency of 1.5MHz 24-VFQFN Exposed Pad package BQ24292IRGET ApplicationsThere are a lot of Texas Instruments BQ24292IRGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2004SNG4 OverviewIf you are looking for it in the Tube package, then you have found it.Located in package 16-SOIC (0.154, 3.90mm Width), it can be found there.The device's mounting type is Surface Mount.Temperature -20°C~70°C TA is recommended for reliable performance.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.For the device to be charged, there is Constant Pulsed current required.There are related parts for this device under the base part number BQ2004.There are 16 terminations in it.Pins 16 are included.In addition to Voltage, there are several other programmable options.In order for the product to function as intended, there are 16 pins that must be connected.Currently, there are 1 available channels.With 5V, you can use a battery to power it.It is crucial that the supply voltage of the device does not exceed 5.5V for the device to work properly.During operation, 2A represents the output current.This device is classified as Power Management Circuits under the subcategory.This device can work at as low a voltage as possible, such as 4.5V.Vsup (maximum supply voltage) is set to 3mA.The part's power supply is set to a value of 5V.There is a minimum input voltage of 4.5V volts.The supply voltage should be set to 5V for best efficiency.With 300kHz switching frequency, the part operates. BQ2004SNG4 Features1 channels Power Management Circuits subcategory Switching frequency of 300kHz 16-SOIC (0.154, 3.90mm Width) package BQ2004SNG4 ApplicationsThere are a lot of Texas Instruments BQ2004SNG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24152YFFT OverviewIt is included in the Tape & Reel (TR) package for convenience.Located in package 20-UFBGA, DSBGA, it can be found there.Surface Mount is the mounting type of the device.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.This device makes use of an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT in order to provide its functionality.To charge the device, you need Constant - Programmable current.There are related parts to this device according to the base part number BQ24152.A total of 20 terminations can be found in it.For the battery pack, it is 4.44V Max.There are 20 pins on it.A number of programmable features are available, including Current, Timer, Voltage.According to the specifications, it should be rated at 1.25A when charging at maximum power.In order for the product to function as intended, there are 20 pins that must be connected.The number of available channels is 1.A 5V battery should be sufficient.Applied input voltage of 6V does not damage the device.Using a 4.44V output voltage results in high efficiency.It is in this instance that the device's output current is set to 1.2A.This device belongs to the subcategory of Power Management Circuits.This device can work at as low a voltage as possible, such as 4V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 5mA.The power supply for this part is set to 5V.It has a 4V volt minimum input voltage.In this particular part, the switching frequency is set to 3MHz. BQ24152YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Power Management Circuits subcategory Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24152YFFT ApplicationsThere are a lot of Texas Instruments BQ24152YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24004PWPRG4 OverviewI found it in the Tape & Reel (TR) package, which comes with everything you need.The product comes in the package of a 20-PowerTSSOP (0.173, 4.40mm Width).A mounting type of Surface Mount has been specified for this device.The best way to adjust the temperature is to set it to -40°C~70°C TA.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.To charge the device, you need Constant current.A list of related parts can be found by searching for the base part number BQ24004.It has 20 terminations.For the battery pack, it is 8.4V.It is equipped with 20 pins.Among the programmable features are Current, Timer.It is necessary to connect the 20 pins during the installation process of this product.It appears that there are 1 channels available at this time.Batteries with a 5V voltage are compatible with it.This device can be operated at an input voltage of 10V without being damaged.High efficiency can be achieved with a 8.4V output voltage.A 1.2A output current is used for operation.A power supply voltage as low as 4.5V can be used for it and it will work as well as possible.The input voltage is set to 4.5V volts.It is also possible, with this device, to generate the additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE. BQ24004PWPRG4 FeaturesBattery pack voltage of 8.4V 1 channels Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-PowerTSSOP (0.173, 4.40mm Width) package BQ24004PWPRG4 ApplicationsThere are a lot of Texas Instruments BQ24004PWPRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24200DGN OverviewThere is a package for Tube in which it can be found.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it as a convenience.A mounting type of Surface Mount has been specified for this device.Keeping the temperature at -40°C~125°C TJ is the right choice.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.It is necessary to supply the device with Constant current in order to charge it.By using the base part number BQ24200, related parts can be found for this device.In total, there are 8 terminations.There is 4.2V voltage in the battery pack.A total of 8 pins are present on it.In addition to Current, Timer, there are several other programmable options.The product is able to function with the help of 8 pins that are required.It is possible to access 1 channels.With a 13.5V supply voltage, it is capable of withstanding the operation of the device.Ideally, when the output voltage of the device is set to 4.25V, you will be able to achieve the highest degree of efficiency.A 500mA output current is used for operation.It is capable of functioning at a voltage as low as possible, for example 2.8V voltage for this circuit is used.As far as the input voltage is concerned, it has a minimum of 2.8V volts.It can accept a maximum input voltage of 13.5V volts.Additionally, OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE can be generated by the device.It is required that a maximum supply voltage of 4.25V be applied as the output voltage for this operation.In order to comply with the constraints, the maximum output current is reduced to 500mA. BQ24200DGN FeaturesBattery pack voltage of 4.2V 1 channels Addtional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package BQ24200DGN ApplicationsThere are a lot of Texas Instruments BQ24200DGN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2004PNG4 OverviewIt is available in the package Tube.With this item, there is a 16-DIP (0.300, 7.62mm) package that comes with it.Amounting type Through Hole is the one associated with the device.To ensure reliable performance, the temperature should be set to -20°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.It is necessary to supply the device with Constant Pulsed current in order to charge it.There are related parts to this device according to the base part number BQ2004.As a whole, it contains 16 terminations.With 16 pins on it, it has a very simple design.This device has a number of programmable features, including Voltage.For the product to work properly, 16 pins must be connected in order to make it work.The number of available channels is 1.It should be able to run off of a 5V battery.It is crucial that the supply voltage of the device does not exceed 5.5V for the device to work properly.2A is the output current during the operation.Devices belonging to subcategory Power Management Circuits include this device.Using a supply voltage as low as 4.5V will allow it to function.In order to ensure optimum supply voltage, the maximum voltage setting is set to 3mA.The power supply for this part is set to 5V.The input voltage is set to 4.5V volts.For best efficiency, set the supply voltage to 5V.The part has 300kHz switching frequency. BQ2004PNG4 Features1 channels Power Management Circuits subcategory Switching frequency of 300kHz 16-DIP (0.300, 7.62mm) package BQ2004PNG4 ApplicationsThere are a lot of Texas Instruments BQ2004PNG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24203DGNG4 OverviewI found it in the Tube package, which comes with everything you need.It can be found in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Surface Mount is the mounting type of the device.Ideally, the temperature should be set to -40°C~125°C TJ in order to ensure reliable performance.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.Device charging requires Constant current.Based on the base part number BQ24203, its related parts can be identified.In total, there are 8 terminations.There is 4.1V voltage in the battery pack.Pins 8 are included.It is possible to program features such as Current, Timer.This product requires that a total of 8 pins be connected in order for it to work correctly.A total of 1 channels are available for use.A supply voltage of no more than 13.5V is required for the device to operate properly.In the case of 4.1V output voltage, there is a possibility of optimal efficiency.There is a constant output current of 500mA when it is operating.It is capable of functioning at a voltage as low as possible, for example 2.8V voltage for this circuit is used.There is a minimum input voltage of 2.8V volts.Furthermore, the device can generate OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE features as well. BQ24203DGNG4 FeaturesBattery pack voltage of 4.1V 1 channels Addtional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package BQ24203DGNG4 ApplicationsThere are a lot of Texas Instruments BQ24203DGNG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2003SG4 OverviewThere is a package for Tube in which it can be found.It is contained in a package named 16-SOIC (0.295, 7.50mm Width).It appears that the device's mounting type is Surface Mount.If you wish to ensure reliable performance, set the temperature to 0°C~70°C TA.It functions by using an analog IC called BATTERY CHARGE CONTROLLER.The device requires Constant of current to charge.It is possible to find the related parts to the base part number BQ2003.It contains 16 terminations, so that is how many there are.Due to the 16 pins on it, it is a very simple circuit.Programmable features, such as Timer, Voltage, are available.To operate the product, it is necessary that 16 pins be inserted into the device.It is important that the supply voltage does not exceed 5.5V for the device to work properly.Having the output voltage set to 5.5V may result in high efficiency.There is a constant output current of 2A when it is operating.A power supply voltage as low as 4.5V can be used for it and it will work as well as possible.2.2mA is set for Vsup (maximum supply voltage).It has a 4.5V volt minimum input voltage.The supply of the gadget is running with 750μA current.A 5V voltage input is present in the device.300kHz is the switching frequency of the part.Voltage input can be as low as 5.5V volts at its maximum.During this operation, the maximum output supply voltage should be 1V. BQ2003SG4 FeaturesSwitching frequency of 300kHz 16-SOIC (0.295, 7.50mm Width) package BQ2003SG4 ApplicationsThere are a lot of Texas Instruments BQ2003SG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24725RGRR OverviewThere is a package called Tape & Reel (TR) that contains this item.It is contained in a package named 20-VFQFN Exposed Pad.Mounting type Surface Mount matches the device.Keeping the temperature at 0°C~125°C TJ is the right choice.An analog IC of POWER SUPPLY MANAGEMENT CIRCUIT is used in this device.To charge the device, a current of Constant - Programmable is required.Identify its related parts based on the base part number BQ24725.The number of terminations found in it is 20 as a whole.There is a voltage of 19.2V Max for the battery pack as well.20 pins are included in the package.You need 20 pins for it to work.In total, this application supports 1 channels.With a 24V supply voltage, it is capable of withstanding the operation of the device.In the case of 19.2V, the output voltage is likely to produce high efficiency.It can function at as low a supply voltage as possible, such as 4.5V.Input voltage is limited to 4.5V volts at the lowest.A switching frequency of 616GHz is present in the part. BQ24725RGRR FeaturesBattery pack voltage of 19.2V Max 1 channels Switching frequency of 616GHz 20-VFQFN Exposed Pad package BQ24725RGRR ApplicationsThere are a lot of Texas Instruments BQ24725RGRR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24272YFFR OverviewIt is contained in the package Tape & Reel (TR).There is a 49-UFBGA, DSBGA package included with this item that you will need to take care of.Mounting type Surface Mount matches the device.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.It functions by using an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.In order to charge the device, it needs to receive Constant - Programmable current.According to the base part number BQ24272, its related parts can be found.A battery pack is going to have a voltage of 3.7V.With maximum charging current, its rating is 2A.There are a total of 49 pins that have to be connected for the product to function correctly.With a 10V supply voltage, it is capable of withstanding the operation of the device.The efficiency of the system can be maximized if the output voltage is 4.44V.This device operates with a current output of 3A.Using a supply voltage as low as 4.2V will allow it to function.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.In this particular part, the switching frequency is set to 1.5MHz. BQ24272YFFR FeaturesBattery pack voltage of 3.7V Switching frequency of 1.5MHz 49-UFBGA, DSBGA package BQ24272YFFR ApplicationsThere are a lot of Texas Instruments BQ24272YFFR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24003PWPR OverviewIt is contained in the package Tape & Reel (TR).For convenience, it is included in the 20-PowerTSSOP (0.173, 4.40mm Width) package.Amounting type Surface Mount is the one associated with the device.Ensure reliable performance by setting the temperature to -40°C~70°C TA.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.Providing Constant current to the device is the only way to charge it.The related parts of the base part number BQ24003 can be found by following the order of the base part number.The overall number of terminations that can be found in it is 20 as a whole.Batteries pack have 4.2V.20 pins are included in the package.Features such as Current, Timer are programmable.You need 20 pins for it to work.Channels are available in a total of 1.There is a possibility that it can be powered by a 5V battery.The board is capable of handling a voltage input of zero volts.A 4.2V output voltage provides high efficiency.There is a constant output current of 1.2A when it is operating.A supply voltage of 4.5V is suitable for it, because it can operate with a low supply voltage.There is a minimum input voltage of 4.5V volts.The device can also generate the additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE. BQ24003PWPR FeaturesBattery pack voltage of 4.2V 1 channels Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-PowerTSSOP (0.173, 4.40mm Width) package BQ24003PWPR ApplicationsThere are a lot of Texas Instruments BQ24003PWPR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24002PWPRG4 OverviewThe package Tape & Reel (TR) contains it, and you can find it there.There is a 20-PowerTSSOP (0.173, 4.40mm Width) package included with this item that you will need to take care of.The mounting type of the device is Surface Mount.The best way to adjust the temperature is to set it to -40°C~70°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.Charge the device with Constant current.If you use the base part number BQ24002, you can look for related parts.There are 20 terminations in it.Battery pack voltage is 4.2V.The device has 20 pins in total.Features like Current, Timer can be programmed.During the installation process, this product requires the connection of 20 pins.A total of 1 channels are available for use.Batteries with a 5V voltage are compatible with it.With a 10V supply voltage, it is capable of withstanding the operation of the device.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.When the operation is completed, the output current is 1.2A.At a low supply voltage, such as 4.5V, it can operate to the best of its ability.Voltage input must be at least 4.5V volts.The device can also generate the additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE. BQ24002PWPRG4 FeaturesBattery pack voltage of 4.2V 1 channels Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-PowerTSSOP (0.173, 4.40mm Width) package BQ24002PWPRG4 ApplicationsThere are a lot of Texas Instruments BQ24002PWPRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24151YFFR OverviewIt is available in the package Tape & Reel (TR).To make it easier for you, it is included with the 20-UFBGA, DSBGA package.It appears that the device's mounting type is Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.This device makes use of an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT in order to provide its functionality.The device needs to be charged at a current of Constant in order to function.It is possible to find the related parts to the base part number BQ24151.As you can see, it has 20 terminations in it.4.44V Max is the voltage for the battery pack.20 pins are included in the package.In addition to Current, Timer, Voltage, a variety of programmable features are available.When charging current is maximum, it is rated at 1.25A.For the product to work properly, 20 pins must be connected in order to make it work.There are 1 channels available for this application.This should be able to operate off of a battery that has a voltage of 5V.If the supply voltage exceeds 6V, the device will not function properly.4.44V output voltages can result in high efficiency.A device of this type will have its output current set to 1.2A in this case.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 4V.There is 5mA voltage set in Vsup (maximum supply voltage).The part's power supply is set to a value of 5V.There is a 4V volt minimum input voltage requirement.A switching frequency of 3MHz is present in the part. BQ24151YFFR FeaturesBattery pack voltage of 4.44V Max 1 channels Power Management Circuits subcategory Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24151YFFR ApplicationsThere are a lot of Texas Instruments BQ24151YFFR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24167RGER OverviewThe Tape & Reel (TR) package contains it.There is a 24-VFQFN Exposed Pad package included with this item that you will need to take care of.The device's mounting type is Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.The device requires Constant - Programmable of current to charge.Identify its related parts based on the base part number BQ24167.It has 24 terminations.The battery pack is set to 3.7V when it comes to the battery.There are 24 pins on it, so it has a very simple design.There are 24 pins necessary to make it work.In total, this application supports 1 channels.It is crucial that the supply voltage of the device does not exceed 10V for the device to work properly.With a 4.2V output voltage, high efficiency is possible.In this case, the output current of the device is set to 2.5A.At a low supply voltage, such as 4.2V, it can operate to the best of its ability.Input voltage minimum is 4V volts, which is a requirement of the device.There is 1.5MHz switching frequency for this part. BQ24167RGER FeaturesBattery pack voltage of 3.7V 1 channels Switching frequency of 1.5MHz 24-VFQFN Exposed Pad package BQ24167RGER ApplicationsThere are a lot of Texas Instruments BQ24167RGER Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24745RHDT OverviewThere is a package for Tape & Reel (TR) in which it can be found.In order to make it more convenient, it has been included in the 28-VFQFN Exposed Pad package.There is a type of mounting for this device: Surface Mount.Ideally, the temperature should be set to -40°C~125°C TJ in order to ensure reliable performance.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.Charge the device by supplying it with Constant - Programmable current.You can find this device's related parts by searching the base part number BQ24745.As a whole, it contains 28 terminations.The battery pack is set to 19.2V Max when it comes to the battery.There are 28 pins on it, so it has a very simple design.In order for it to work, it requires 28 pins.There are 1 channels available for this application.Using a 20V battery should be enough to run it.Applied input voltage of 24V does not damage the device.There is a possibility of achieving optimal efficiency when the output voltage of the device is 19.2V.During operation, 8A represents the output current.The device falls under the Power Management Circuits subcategory.The device can operate at as low a supply voltage as possible, such as 7V.There is 12mA voltage set in Vsup (maximum supply voltage).Input voltage minimum is 7V volts, which is a requirement of the device.In this particular part, the switching frequency is set to 300kHz.A reduction in maximum output current to 8.064A occurs during operation. BQ24745RHDT FeaturesBattery pack voltage of 19.2V Max 1 channels Power Management Circuits subcategory Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24745RHDT ApplicationsThere are a lot of Texas Instruments BQ24745RHDT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.