Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | BQ24075TRGTT OverviewThere is a package for Tape & Reel (TR) in which it can be found.There is currently a package available named 16-VFQFN Exposed Pad.There is a mounting type Surface Mount specified for the device.The correct temperature setting is 0°C~125°C TJ.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.Charge the device by providing it with Constant - Programmable current.This device's related parts can be found under the base part number BQ24075.As you can see, it has 16 terminations in it.A battery pack is going to have a voltage of 4.2V.It is equipped with 16 pins.Serveral programmable features like Current, Timer.The product is able to function with the help of 16 pins that are required.The number of available channels is 1.In theory, it should be able to run on a battery that has a voltage of 5VV.It is important that the supply voltage does not exceed 6.4V for the device to work properly.There is a possibility of high efficiency if the output voltage is set to 4.2V.In this case, the output current of the device is set to 1.5A.Subcategory 0 is home to this device.It can function at as low a supply voltage as possible, such as 4.35V.The part's power supply is set to 4.5/6.3V.There is a minimum input voltage of 4.3V volts.This gadget's power supply has a current of 1.5mA flowing through it.Furthermore, the device can generate DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED features as well.It is important to note that the maximum output supply voltage for this operation must be set to 5.6V.It is important to note that during operation, the maximum output current is reduced to 4.5A. BQ24075TRGTT FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED 16-VFQFN Exposed Pad package BQ24075TRGTT ApplicationsThere are a lot of Texas Instruments BQ24075TRGTT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24079RGTT OverviewIt is available in the package Tape & Reel (TR).We've included it in the 16-VFQFN Exposed Pad package so that it's easier to use.A Surface Mount mounting type is assigned to the device.Keeping the temperature at -40°C~125°C TJ is the right choice.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.It is necessary to supply the device with Constant - Programmable current in order to charge it.There are related parts to this device according to the base part number BQ24079.As a whole, it contains 16 terminations.It is 4.1V for the battery pack.The device has a total of 16 pins.This feature allows for programmability, such as Current, Timer.There are 16 pins necessary to make it work.In total, this application supports 1 channels.There is a possibility that it can be powered by a 5V battery.An input voltage of 6.4V can be applied to the device without damage.In the case of a 4.1V output voltage, high efficiency is possible.Operation is done using a 1.5A output current.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.There is 4.5/6.3V power supply set for the part.Input voltage is limited to 4.3V volts at the lowest.This operation requires a voltage of 5.5V as the maximum output supply voltage.It is important to note that during operation, the maximum output current is reduced to 4.5A. BQ24079RGTT FeaturesBattery pack voltage of 4.1V 1 channels Power Management Circuits subcategory 16-VFQFN Exposed Pad package BQ24079RGTT ApplicationsThere are a lot of Texas Instruments BQ24079RGTT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2057DGK OverviewThere is a package called Tube that contains this item.The package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) includes a version of it.A Surface Mount mounting type is assigned to the device.The best way to adjust the temperature is to set it to -20°C~70°C TA.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.Constant - Programmable current is required to charge the device.Based on the base part number BQ2057, its related parts can be identified.In total, there are 8 terminations.In addition, it is equipped with 8 pins.It is possible to program features such as Current.You need 8 pins for it to work.The number of channels available is 1.Using a 5V battery should be enough to run it.It is crucial that the supply voltage of the device does not exceed 15V for the device to work properly.In the case of 4.1V output voltage, there is a possibility of optimal efficiency.Operation is done using a 2A output current.Devices belonging to subcategory Power Management Circuits include this device.This circuit can function at a low supply voltage, such as 4.5VV.It is set to 4mA for Vsup (maximum supply voltage).There is a minimum input voltage of 4.5V volts. BQ2057DGK Features1 channels Power Management Circuits subcategory 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package BQ2057DGK ApplicationsThere are a lot of Texas Instruments BQ2057DGK Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73832-3ACI/MC OverviewIt is available in the package Tube.It comes as part of the 8-VFDFN Exposed Pad package.The mounting type of the device is Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.Providing Constant - Programmable current to the device is the only way to charge it.According to the base part number MCP73832, its related parts can be found.There are no terminations in it at all.There is a voltage of 4.35V for the battery pack as well.There are 8 pins on it, so it has a very simple design.In addition to the standard features, a number of programmable functions are available to the user, such as Current.In order for it to work, it requires 8 pins.Currently, there are a total of 1 channels available for use in the application.The device should operate on a 5.35VV battery.A supply voltage of no more than 6V is required for the device to operate properly.In the case of 4.35V output voltage, there is a possibility of optimal efficiency.500mA is the output current during the operation.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.It is mounted in the manner of Surface Mount. MCP73832-3ACI/MC FeaturesBattery pack voltage of 4.35V 1 channels 8-VFDFN Exposed Pad package MCP73832-3ACI/MC ApplicationsThere are a lot of Microchip Technology MCP73832-3ACI/MC Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2002ESN OverviewThere is a package for Tube in which it can be found.With this item, there is a 8-SOIC (0.154, 3.90mm Width) package that comes with it.It appears that the device's mounting type is Surface Mount.This is the right thing to do: set the temperature to 0°C~70°C TA.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.If the device needs to be charged, it must be supplied with Constant Pulsed current.A list of related parts can be found by searching for the base part number BQ2002.8 terminations are present.2V is the voltage for the battery pack.8 pins are attached to it.The unit is equipped with a number of programmable features, including Voltage.For the product to work correctly, 8 pins are required, and a connection to each pin is required.It can be powered by a battery with 5V.It is capable of withstanding a 6V supply voltage.In this case, the output current of the device is set to 2A.Subcategory 0 is home to this device.At a low supply voltage, such as 4V, it can operate to the best of its ability.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.5mA.When it comes to the part's power supply, it is set to 5V.The input voltage is set to 4V volts.This gadget's power supply has a current of 500μA flowing through it.It is recommended that the supply voltage be set to 5V for maximum efficiency.Input voltage is limited to 6V volts.To fulfill the operation requirements, the maximum output supply voltage is reduced to 2V. BQ2002ESN FeaturesBattery pack voltage of 2V Power Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package BQ2002ESN ApplicationsThere are a lot of Texas Instruments BQ2002ESN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2002TPN OverviewThere is a package Tube available.In order to make it more convenient, it has been included in the 8-DIP (0.300, 7.62mm) package.There is a type of mounting for this device: Through Hole.The best thing to do is to set the temperature to 0°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.In order to charge the device, it needs to receive Constant Pulsed current.You can find this device's related parts by searching the base part number BQ2002.There are 8 terminations in it.There is a setting of 2V for the battery pack.The device has 8 pins in total.Several programmable features, including Voltage.To operate the product, it is necessary that 8 pins be inserted into the device.There are 1 channels available for this application.Batteries with 5V can be used to power it.With a 6V supply voltage, it is capable of withstanding the operation of the device.A 2A output current is used for operation.This device belongs to the subcategory of Power Management Circuits.The device can operate at a voltage of 4V as low as possible.It is set to 0.5mA for Vsup (maximum supply voltage).Regarding the power supply for the part, it is set to 5V.Voltage input must be at least 4V volts.There is 500μA current flowing through the gadget's supply.The best efficiency can be achieved by setting the supply voltage to 5V. BQ2002TPN FeaturesBattery pack voltage of 2V 1 channels Power Management Circuits subcategory 8-DIP (0.300, 7.62mm) package BQ2002TPN ApplicationsThere are a lot of Texas Instruments BQ2002TPN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73833-NVI/MF OverviewThere is a package Tube available.For convenience, it is included in the 10-VFDFN Exposed Pad package.The device's mounting type is Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Providing Constant - Programmable current to the device is the only way to charge it.You can find this device's related parts by searching the base part number MCP73833.In total, there are 10 terminations.With 10 pins on it, it has a very simple design.You can program a number of features, including Current.It is listed on the device that it can charge at a maximum current of 1.1A.In order to operate it, it has 10 pins.The system currently provides 1 channels for the user to use.It should be able to run off a battery of 5.35V.It is crucial that the supply voltage of the device does not exceed 6V for the device to work properly.Ideally, when the output voltage of the device is set to 4.35V, you will be able to achieve the highest degree of efficiency.With an output current of 0, the operation is carried out.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 3.75VV.Aligning it with Surface Mount is required for mounting.It is set to 3mA for Vsup (maximum supply voltage).With respect to the power supply for the part, it is set to 3.8/5.5V.Supply current for the gadget is set to 2mA. MCP73833-NVI/MF Features1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73833-NVI/MF ApplicationsThere are a lot of Microchip Technology MCP73833-NVI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ25015RHLT OverviewIt is included in the Tape & Reel (TR) package. We've included it in the 20-VFQFN Exposed Pad package so that it's easier to use.Device mounting type Surface Mount is specified.Temperature -40°C~125°C TA is recommended for reliable performance.This device makes use of an analog IC of SWITCHING REGULATOR.Providing Constant - Programmable current to the device is the only way to charge it.You can find this device's related parts by searching the base part number BQ25015.It is possible to find a total of 20 terminations.This battery pack has a voltage of 4.2V.With 20 pins on it, it has a very simple design.It requires pins 20 to function.It can be powered by a battery with 5V.The board is capable of handling a voltage input of zero volts.700mV output voltages can result in high efficiency.With an output current of 0, the operation is carried out.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.There is 2mA voltage set in Vsup (maximum supply voltage).The part's power supply is set to 5V.Input voltage minimum is 4.5V volts, which is a requirement of the device.As far as switching frequency is concerned, the part runs at 1MHz.The additional features of PFM MODE IS ALSO AVAILABLE can also be generated with this device.To meet operation conditions, the maximum output current is reduced to 500mA. BQ25015RHLT FeaturesBattery pack voltage of 4.2V Power Management Circuits subcategory Switching frequency of 1MHz Addtional features of PFM MODE IS ALSO AVAILABLE 20-VFQFN Exposed Pad package BQ25015RHLT ApplicationsThere are a lot of Texas Instruments BQ25015RHLT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ25618YFFT OverviewThere is a package named Cut Tape (CT) that contains it.For convenience, it is included in the 30-UFBGA, DSBGA package.Amounting type Surface Mount is the one associated with the device.It is recommended to set the temperature to -40°C~85°C TA for reliable performance.It provides its functionality by using an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.To charge the device, Constant - Programmable current is required.By using the base part number BQ25618, related parts can be found for this device.A total of 30 terminations can be found in it.There is a setting of 4.52V Max for the battery pack.This feature allows for programmability, such as Current, Timer, Voltage.At the maximum charging current, it has a rating of 1.5A.There are a total of 1 channels available for use in this application.Devices with 13.5V maximum supply voltages are recommended.It should be able to run off a battery of 5V. BQ25618YFFT FeaturesBattery pack voltage of 4.52V Max 1 channels 30-UFBGA, DSBGA package BQ25618YFFT ApplicationsThere are a lot of Texas Instruments BQ25618YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2002DSN OverviewIt is contained in the package Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that comes with this item.Mounting type Surface Mount matches the device.This is the right thing to do: set the temperature to 0°C~70°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.The related parts of the base part number BQ2002 can be found by following the order of the base part number.In total, there are 8 terminations.The battery pack has 2V.Pins 8 are included.In addition to the standard features, a number of programmable functions are available to the user, such as Voltage.It requires pins 8 to function.There are 1 channels available.Power can be provided by a battery with 5V.It is crucial that the supply voltage of the device does not exceed 6V for the device to work properly.In this case, the output current of the device is set to 2A.This device is classified as Power Management Circuits under the subcategory.A power supply voltage as low as 4V can be used for it and it will work as well as possible.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.5mA.The power supply for this part is set to 5V.As far as the input voltage is concerned, it has a minimum of 4V volts.There is 500μA current flowing through the gadget's supply.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system. BQ2002DSN FeaturesBattery pack voltage of 2V 1 channels Power Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package BQ2002DSN ApplicationsThere are a lot of Texas Instruments BQ2002DSN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73834-FCI/UN OverviewIt is contained in the package Tube.We've included it in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package so that it's easier to use.A Surface Mount mounting type is assigned to the device.Ideally, the temperature should be set to -40°C~85°C TA in order to ensure reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Charge the device by providing it with Constant - Programmable current.This device's related parts can be found under the base part number MCP73834.It contains 10 terminations, so that is how many there are.This battery pack has a voltage of 4.2V.It is equipped with 10 pins.In addition to Current, there are several other programmable options.On the device, it is listed as having a charge current of 1.1A.It requires pins 10 to function.It is possible to access 1 channels.A 5.2V battery should be sufficient.An input voltage of 6V can be applied to the device without damage.High efficiency can be achieved with a 4.5V output voltage.A 1A output current is used for operation.There is one subcategory of this device, and it is Power Management Circuits.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.3mA is set for Vsup (maximum supply voltage).The part's power supply is set to 3.8/5.5V.It can accept a maximum input voltage of 6V volts.It is mandatory to set the voltage at 4.5V for the maximum output supply voltage for this operation. MCP73834-FCI/UN FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package MCP73834-FCI/UN ApplicationsThere are a lot of Microchip Technology MCP73834-FCI/UN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP73834-FCI/MF OverviewIt comes in the package?of a Tube. It comes as part of the 10-VFDFN Exposed Pad package.In this case, the device is mounted in the way of Surface Mount.A temperature setting of -40°C~85°C TA ensures reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Constant - Programmable current is required to charge the device.It is possible to find the related parts of this device by looking at its base part number MCP73834.It contains 10 terminations.There is a setting of 4.2V for the battery pack.This board has 10 pins, making it very simple to construct.Programmable features, such as Current, are available.When charging current is maximum, it is rated at 1.1A.There are 10 pins required in order for the product to function.The total number of channels that can be accessed by users is 1.Batteries with 5.2V should be able to power it.Applied input voltage of 6V does not damage the device.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.5V.There is a constant output current of 1.2A when it is operating.There is one subcategory of this device, and it is Power Management Circuits.At a low supply voltage, such as 3.75V, it can operate to the best of its ability.As far as the mounting is concerned, it is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.The part's power supply is set to 3.8/5.5V. MCP73834-FCI/MF FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73834-FCI/MF ApplicationsThere are a lot of Microchip Technology MCP73834-FCI/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24167RGET OverviewIt is included in the Tape & Reel (TR) package for convenience.An included version of it is available in the package 24-VFQFN Exposed Pad.There is a mounting type Surface Mount specified for the device.The temperature should be set to -40°C~85°C TA to ensure reliable performance.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.Providing Constant - Programmable current to the device is the only way to charge it.It is possible to find the related parts to the base part number BQ24167.Taking it as a whole, it has been concluded that there are 24 terminations to be found.It is set to 3.7V for the battery pack.24 pins are included in the package.In order for it to work, it requires 24 pins.There are 1 channels available.With a 10V supply voltage, it is capable of withstanding the operation of the device.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.Operation is done using a 2.5A output current.It is capable of functioning at a voltage as low as possible, for example 4.2V voltage for this circuit is used.Input voltage is limited to 4V volts at the lowest.The gadget's supply current is set to 2.5A.There is 1.5MHz switching frequency for this part.It is important to note that the maximum output supply voltage for this operation must be set to 4.24V.In the course of operation, the maximum output current is reduced to 3A. BQ24167RGET FeaturesBattery pack voltage of 3.7V 1 channels Switching frequency of 1.5MHz 24-VFQFN Exposed Pad package BQ24167RGET ApplicationsThere are a lot of Texas Instruments BQ24167RGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24185YFFT OverviewThere is a package for Tape & Reel (TR) in which it can be found.Located in package 25-UFBGA, DSBGA, it can be found there.Mounting type is Surface Mount.The best thing to do is to set the temperature to -30°C~85°C TA.Analog IC POWER SUPPLY MANAGEMENT CIRCUIT is responsible for implementing the device.If the device needs to be charged, it must be supplied with Constant - Programmable current.This part number BQ24185 can be used to find its related parts.There are no terminations in it at all.Batteries pack have 4.44V Max.25 pins are included in the package.The unit is equipped with a number of programmable features, including Timer.It is listed on the device that it can charge at a maximum current of 1.5A.Product functionality is dependent on 25 pins.It is possible to access 1 channels.Batteries with 5V can be used to power it.This device can be operated at an input voltage of 16V without being damaged.When the output voltage is 4.44V, high efficiency is possible.This device operates with a current output of 1.55A.It can function at as low a supply voltage as possible, such as 4V.It has a 4V volt minimum input voltage.The gadget's supply is running at 10mA volts.With 3MHz switching frequency, the part operates.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.44V.As a result of the reduction in maximum output current, the output current should be kept below 2A during operation. BQ24185YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Switching frequency of 3MHz 25-UFBGA, DSBGA package BQ24185YFFT ApplicationsThere are a lot of Texas Instruments BQ24185YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24750RHDTG4 OverviewIn the Tape & Reel (TR) package, you will find it.The package 28-VFQFN Exposed Pad includes a version of it.There is a type of mounting for this device: Surface Mount.It is best to set the temperature to -40°C~125°C TJ.In order to operate, the device relies on an analog IC named POWER SUPPLY MANAGEMENT CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.If you use the base part number BQ24750, you can look for related parts.28 terminations are present.Hence, the battery pack is at 18.048V Max when it comes to voltage.28 pins are included in the package.With maximum charging current, its rating is 10A.Product functionality is dependent on 28 pins.The system currently provides 1 channels for the user to use.With 20V, you can use a battery to power it.As long as the supply voltage is 24V, it is capable of withstanding the voltage.In the case of 2V, the output voltage is likely to produce high efficiency.It is performed with a current output of 1mA for the output of the operation.There is a subcategory of Power Management Circuits for this device.This device can work at as low a voltage as possible, such as 5V.It is mounted in the same way as Surface Mount.It is important to note that during operation, the maximum output current is reduced to 1mA. BQ24750RHDTG4 FeaturesBattery pack voltage of 18.048V Max 1 channels Power Management Circuits subcategory 28-VFQFN Exposed Pad package BQ24750RHDTG4 ApplicationsThere are a lot of Texas Instruments BQ24750RHDTG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24400DG4 OverviewIt comes in the package?of a Tube. The package that is included with it comes in the shape of a 8-SOIC (0.154, 3.90mm Width).There is a mounting type Surface Mount specified for the device.The correct temperature setting is -20°C~70°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.It is possible to find related parts of this device by using the base part number BQ24400.As far as the terminations are concerned, there are 8.Pins 8 are included.A number of programmable features are available, including Timer, Voltage.It requires pins 8 to function.Currently, there are 1 available channels.If it runs off of a 5V battery, then it should be able to run continuously.It is important that the supply voltage does not exceed 6V for the device to work properly.A 2A output current is used for operation.This device belongs to the subcategory of Power Management Circuits.The device can operate at a voltage of 4V as low as possible.In most cases, the maximum supply voltage (Vsup) is set to 1mA.It is set to 5V when it comes to the power supply for the part.There is a minimum input voltage of 4V volts.For best efficiency, set the supply voltage to 5V.In this particular part, the switching frequency is set to 300kHz. BQ24400DG4 Features1 channels Power Management Circuits subcategory Switching frequency of 300kHz 8-SOIC (0.154, 3.90mm Width) package BQ24400DG4 ApplicationsThere are a lot of Texas Instruments BQ24400DG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24159YFFT OverviewThere is a package Tape & Reel (TR) available.In the package 20-UFBGA, DSBGA, there is a version of it.A mounting type of Surface Mount has been specified for this device.To ensure reliable performance, the temperature should be set to -30°C~85°C TA.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.Providing Constant - Programmable current to the device is the only way to charge it.The base part number BQ24159 represents its related parts.As far as the terminations are concerned, there are 20.It is a 4.44V Max voltage for the battery pack.A total of 20 pins are present on it.Current, Timer are a programmable feature.The operation?are 20 pins.In total, this application supports 1 channels.The battery would need to have a voltage of 5V for the device to work.In order for the device to operate properly, the supply voltage should not exceed 9V.In the case of 4.44V output voltage, there is a possibility of optimal efficiency.Operation is achieved by providing a 1.55A output current.This device can work at as low a voltage as possible, such as 4V.Input voltage must be at least 4V volts in order to function.This part has a switching frequency of 3MHz and operates with this frequency. BQ24159YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24159YFFT ApplicationsThere are a lot of Texas Instruments BQ24159YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24292IRGET OverviewThis can be found in the Tape & Reel (TR) package.A 24-VFQFN Exposed Pad package is included with this item as part of its contents.The mounting type of the device is Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.By using the base part number BQ24292, related parts can be found for this device.24 terminations are present.There is 4.4V voltage in the battery pack.Several programmable features, including Current.There are 24 pins necessary to make it work.There are 1 channels available.An input voltage of 17V can be applied to the device without damage.In the case of a 3.65V output voltage, high efficiency is possible.In this case, the output current of the device is set to 4.5A.There is one subcategory of this device, and it is Power Management Circuits.At a low supply voltage, such as 3.9V, it can operate to the best of its ability.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3000mA.This gadget's power supply has a current of 3A flowing through it.It operates at a switching frequency of 1.5MHz. BQ24292IRGET FeaturesBattery pack voltage of 4.4V 1 channels Power Management Circuits subcategory Switching frequency of 1.5MHz 24-VFQFN Exposed Pad package BQ24292IRGET ApplicationsThere are a lot of Texas Instruments BQ24292IRGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24151AYFFT OverviewThe package Tape & Reel (TR) contains it, and you can find it there.It comes as part of the 20-UFBGA, DSBGA package.Mounting type is Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Device charging requires Constant - Programmable current.You can find this device's related parts by searching the base part number BQ24151.It has 20 terminations.A battery pack is going to have a voltage of 4.44V Max.The device consists of 20 pins, which are arranged in a row.The unit is equipped with a number of programmable features, including Current, Timer, Voltage.A maximum charging current of 1.25A is achieved by the part.During the installation process, this product requires the connection of 20 pins.The system currently provides 1 channels for the user to use.A 5V battery should be sufficient.It is capable of withstanding a 6V supply voltage.When the output voltage is 4.44V, high efficiency is possible.Operation is achieved by providing a 1.2A output current.This device is a member of subcategory Power Management Circuits.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.It is configured to be 5mA for Vsup (maximum supply voltage).The power supply for this part is set to 5V.There is a minimum input voltage of 4V volts.There is 10mA current flowing through the gadget's supply.A switching frequency of 3MHz is present in the part. BQ24151AYFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Power Management Circuits subcategory Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24151AYFFT ApplicationsThere are a lot of Texas Instruments BQ24151AYFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2004SNG4 OverviewIf you are looking for it in the Tube package, then you have found it.Located in package 16-SOIC (0.154, 3.90mm Width), it can be found there.The device's mounting type is Surface Mount.Temperature -20°C~70°C TA is recommended for reliable performance.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.For the device to be charged, there is Constant Pulsed current required.There are related parts for this device under the base part number BQ2004.There are 16 terminations in it.Pins 16 are included.In addition to Voltage, there are several other programmable options.In order for the product to function as intended, there are 16 pins that must be connected.Currently, there are 1 available channels.With 5V, you can use a battery to power it.It is crucial that the supply voltage of the device does not exceed 5.5V for the device to work properly.During operation, 2A represents the output current.This device is classified as Power Management Circuits under the subcategory.This device can work at as low a voltage as possible, such as 4.5V.Vsup (maximum supply voltage) is set to 3mA.The part's power supply is set to a value of 5V.There is a minimum input voltage of 4.5V volts.The supply voltage should be set to 5V for best efficiency.With 300kHz switching frequency, the part operates. BQ2004SNG4 Features1 channels Power Management Circuits subcategory Switching frequency of 300kHz 16-SOIC (0.154, 3.90mm Width) package BQ2004SNG4 ApplicationsThere are a lot of Texas Instruments BQ2004SNG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24152YFFT OverviewIt is included in the Tape & Reel (TR) package for convenience.Located in package 20-UFBGA, DSBGA, it can be found there.Surface Mount is the mounting type of the device.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.This device makes use of an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT in order to provide its functionality.To charge the device, you need Constant - Programmable current.There are related parts to this device according to the base part number BQ24152.A total of 20 terminations can be found in it.For the battery pack, it is 4.44V Max.There are 20 pins on it.A number of programmable features are available, including Current, Timer, Voltage.According to the specifications, it should be rated at 1.25A when charging at maximum power.In order for the product to function as intended, there are 20 pins that must be connected.The number of available channels is 1.A 5V battery should be sufficient.Applied input voltage of 6V does not damage the device.Using a 4.44V output voltage results in high efficiency.It is in this instance that the device's output current is set to 1.2A.This device belongs to the subcategory of Power Management Circuits.This device can work at as low a voltage as possible, such as 4V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 5mA.The power supply for this part is set to 5V.It has a 4V volt minimum input voltage.In this particular part, the switching frequency is set to 3MHz. BQ24152YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Power Management Circuits subcategory Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24152YFFT ApplicationsThere are a lot of Texas Instruments BQ24152YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24200DGN OverviewThere is a package for Tube in which it can be found.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it as a convenience.A mounting type of Surface Mount has been specified for this device.Keeping the temperature at -40°C~125°C TJ is the right choice.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.It is necessary to supply the device with Constant current in order to charge it.By using the base part number BQ24200, related parts can be found for this device.In total, there are 8 terminations.There is 4.2V voltage in the battery pack.A total of 8 pins are present on it.In addition to Current, Timer, there are several other programmable options.The product is able to function with the help of 8 pins that are required.It is possible to access 1 channels.With a 13.5V supply voltage, it is capable of withstanding the operation of the device.Ideally, when the output voltage of the device is set to 4.25V, you will be able to achieve the highest degree of efficiency.A 500mA output current is used for operation.It is capable of functioning at a voltage as low as possible, for example 2.8V voltage for this circuit is used.As far as the input voltage is concerned, it has a minimum of 2.8V volts.It can accept a maximum input voltage of 13.5V volts.Additionally, OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE can be generated by the device.It is required that a maximum supply voltage of 4.25V be applied as the output voltage for this operation.In order to comply with the constraints, the maximum output current is reduced to 500mA. BQ24200DGN FeaturesBattery pack voltage of 4.2V 1 channels Addtional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package BQ24200DGN ApplicationsThere are a lot of Texas Instruments BQ24200DGN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24271RGER OverviewThere is an Tape & Reel (TR) package that contains it. The package 24-VFQFN Exposed Pad includes a version of it.Mounting type for the device is Surface Mount.The correct temperature setting is -40°C~85°C TA.A analog IC of POWER SUPPLY MANAGEMENT CIRCUIT has been used in the design of this device.To charge the device, you need Constant - Programmable current.There are related parts for this device under the base part number BQ24271.It has a total of 24 terminations.There is 3.7V voltage in the battery pack.Among the programmable features are Current.In order for the product to function as intended, there are 24 pins that must be connected.It appears that there are 1 channels available at this time.There is 6V maximum supply voltage for this device.This device can be operated at an input voltage of 6.5V without being damaged.In this case, the output current of the device is set to 1.5A.This circuit can function at a low supply voltage, such as 3.5VV.Aligning it with Surface Mount is required for mounting.Current is flowing through the gadget's supply at 1.5A volts.In this particular part, the switching frequency is set to 1.5MHz. BQ24271RGER FeaturesBattery pack voltage of 3.7V 1 channels Switching frequency of 1.5MHz 24-VFQFN Exposed Pad package BQ24271RGER ApplicationsThere are a lot of Texas Instruments BQ24271RGER Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24751RHDT OverviewThe package Tape & Reel (TR) contains it, and you can find it there.For convenience, it is included in the 28-VFQFN Exposed Pad package.Device mounting type Surface Mount is specified.Keeping the temperature at -55°C~125°C TJ is the right choice.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.There are related parts to this device according to the base part number BQ24751.In general, the number of terminations found within it is 28 as a whole.It is 18.048V Max for the battery pack.It is equipped with 28 pins.When charging current is maximum, it is rated at 10A.In order for it to work, it requires 28 pins.There are a total of 1 channels available for use in this application.Power can be provided by a battery with 7V.Applied input voltage of 24V does not damage the device.Having the output voltage set to 4.512V may result in high efficiency.During operation, 1mA represents the output current.There is a subcategory of Power Management Circuits for this device.The device can operate at as low a supply voltage as possible, such as 5V.It is mounted in the manner of Surface Mount. BQ24751RHDT FeaturesBattery pack voltage of 18.048V Max 1 channels Power Management Circuits subcategory 28-VFQFN Exposed Pad package BQ24751RHDT ApplicationsThere are a lot of Texas Instruments BQ24751RHDT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24153YFFR OverviewIn the Tape & Reel (TR) package, you will find it.The package that is included with it comes in the shape of a 20-UFBGA, DSBGA.Surface Mount is the mounting type of the device.The temperature should be set to -30°C~85°C TA to ensure reliable performance.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.In order to charge the device, it needs to receive Constant - Programmable current.By using the base part number BQ24153, related parts can be found for this device.It contains 20 terminations.The battery pack has 4.44V Max.The device has a total of 20 pins.You can program a number of features, including Current, Timer.For the product to work properly, 20 pins must be connected in order to make it work.Currently, there are 1 available channels.A 5V battery should be sufficient.There is no damage to the device if an input voltage of 6V is applied.In the case of a 4.44V output voltage, high efficiency is possible.1.25A is the output current during the operation.At a low supply voltage, such as 4V, it can operate to the best of its ability.Amounting is in line with Surface Mount. BQ24153YFFR FeaturesBattery pack voltage of 4.44V Max 1 channels 20-UFBGA, DSBGA package BQ24153YFFR ApplicationsThere are a lot of Texas Instruments BQ24153YFFR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24704RGER OverviewThe Tape & Reel (TR) package contains it.There is currently a package available named 24-VFQFN Exposed Pad.This device is mounted using type Surface Mount.The best thing to do is to set the temperature to -40°C~125°C TJ.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you need Constant - Programmable current.Based on the base part number BQ24704, its related parts can be identified.It contains 24 terminations, so that is how many there are.Hence, the battery pack is at 18V Max when it comes to voltage.Total number of pins: 24.As long as it is charged at maximum current, it will be rated as 8A.For the product to work properly, 24 pins must be connected in order to make it work.There are 1 channels available for this application.As their maximum supply voltage, devices require 24V.Power can be provided by a battery with 7V.It is important that the supply voltage does not exceed 14V for the device to work properly.A 18V output voltage provides high efficiency.A device of this type will have its output current set to 10A in this case.The device can operate at a voltage of 7V as low as possible.As far as the mounting is concerned, it is mounted in the way of Surface Mount.300kHz is the switching frequency of the part. BQ24704RGER FeaturesBattery pack voltage of 18V Max 1 channels Switching frequency of 300kHz 24-VFQFN Exposed Pad package BQ24704RGER ApplicationsThere are a lot of Texas Instruments BQ24704RGER Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24273YFFT OverviewIt is available in the package Tape & Reel (TR).There is a 49-UFBGA, DSBGA package included with this item that you will need to take care of.Mounting type Surface Mount matches the device.Keeping the temperature at -40°C~85°C TA is the right choice.Using an analog IC of type POWER SUPPLY MANAGEMENT CIRCUIT, this device is able to communicate with the outside world.To charge the device, you will need to supply it with Constant - Programmable of current.The base part number BQ24273 represents its related parts.The number of terminations found in it is 49 as a whole.Batteries have a voltage of 4.44V Max.Product functionality is dependent on 49 pins.This application has a total of 1 channels that can be used.10V is the maximum supply voltage for the device.A battery with 0V would be enough for it to run.An input voltage of 18V can be applied to the device without damage.This device operates with a current output of 2.5A.A power supply voltage as low as 4.2V can be used for it and it will work as well as possible.It is mounted in the same way as Surface Mount.For best efficiency, set the supply voltage to 10.5V.1.5MHz is the switching frequency of the part.Additional features of BATTERY DETECTION VOLTAGE THRESHOLD IS 3V, 3.3V can also be generated by the device. BQ24273YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Switching frequency of 1.5MHz Addtional features of BATTERY DETECTION VOLTAGE THRESHOLD IS 3V, 3.3V 49-UFBGA, DSBGA package BQ24273YFFT ApplicationsThere are a lot of Texas Instruments BQ24273YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24751BRHDR OverviewIn the Tape & Reel (TR) package, you will find it.Located in package 28-VFQFN Exposed Pad, it can be found there.Mounting type Surface Mount matches the device.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.A charge of Constant - Programmable current is required to be applied to the device.The base part number BQ24751 represents its related parts.It has a total of 28 terminations.The battery pack has 18.048V Max.A total of 28 pins are present on it.A maximum charging current of 10A is achieved by the part.In order for the product to be functional, it requires that you connect the 28 pins according to the instructions.The number of available channels is 1.The device can withstand a supply voltage of 24V.With a 80mA output current, the operation is conducted.It is capable of functioning at a voltage as low as possible, for example 5V voltage for this circuit is used.In order to mount it, it has to align itself with Surface Mount.The part has 300kHz switching frequency. BQ24751BRHDR FeaturesBattery pack voltage of 18.048V Max 1 channels Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24751BRHDR ApplicationsThere are a lot of Texas Instruments BQ24751BRHDR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24705RGET OverviewThis item can be found in the Tape & Reel (TR) package.There is a 24-VFQFN Exposed Pad package included with this item that you will need to take care of.Mounting type Surface Mount is chosen for the device.The correct temperature setting is -40°C~125°C TJ.POWER SUPPLY MANAGEMENT CIRCUIT is the analog IC used in this device.Providing Constant - Programmable current to the device is the only way to charge it.It is possible to find the related parts of this device by looking at its base part number BQ24705.There are 24 terminations in it.It is a 18V Max voltage for the battery pack.24 pins are attached to it.The operation?are 24 pins.A total of 1 channels are available for use.It can be powered by a battery with 20V.Applied input voltage of 24V does not damage the device.In the case of 18V, the output voltage is likely to produce high efficiency.In this case, the output current of the device is set to 8A.At a low supply voltage, such as 5V, it can operate to the best of its ability.As far as the mounting is concerned, it is mounted in the way of Surface Mount.There is 8A current flowing through the gadget's supply.A switching frequency of 600kHz is present in the part.Input voltage is limited to 24V volts.In order for the operation to be carried out successfully, a maximum output supply voltage of 18V is required. BQ24705RGET FeaturesBattery pack voltage of 18V Max 1 channels Switching frequency of 600kHz 24-VFQFN Exposed Pad package BQ24705RGET ApplicationsThere are a lot of Texas Instruments BQ24705RGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ24745RHDTG4 OverviewThe package that has it is the Tape & Reel (TR) package.We've included it in the 28-VFQFN Exposed Pad package so that it's easier to use.The device's mounting type is Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.A charge of Constant - Programmable current is required to be applied to the device.It is possible to find the related parts of this device by looking at its base part number BQ24745.In total, there are 28 terminations.A battery pack is going to have a voltage of 19.2V Max.28 pins are included in the package.For the product to work properly, 28 pins must be connected in order to make it work.A total of 1 channels are available for use.As their maximum supply voltage, devices require 24V.Power can be provided by a battery with 20V.It is important that the supply voltage does not exceed 24V for the device to work properly.In the case of 19.2V output voltage, there is a possibility of optimal efficiency.There is 8A output current when the device operates.Devices belonging to subcategory Power Management Circuits include this device.A supply voltage of 7V is suitable for it, because it can operate with a low supply voltage.12mA is set for Vsup (maximum supply voltage).It has a 7V volt minimum input voltage.The part has 300kHz switching frequency.In order to comply with the constraints, the maximum output current is reduced to 8.064A. BQ24745RHDTG4 FeaturesBattery pack voltage of 19.2V Max 1 channels Power Management Circuits subcategory Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24745RHDTG4 ApplicationsThere are a lot of Texas Instruments BQ24745RHDTG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.