Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | BQ24751RHDT OverviewThe package Tape & Reel (TR) contains it, and you can find it there.For convenience, it is included in the 28-VFQFN Exposed Pad package.Device mounting type Surface Mount is specified.Keeping the temperature at -55°C~125°C TJ is the right choice.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.There are related parts to this device according to the base part number BQ24751.In general, the number of terminations found within it is 28 as a whole.It is 18.048V Max for the battery pack.It is equipped with 28 pins.When charging current is maximum, it is rated at 10A.In order for it to work, it requires 28 pins.There are a total of 1 channels available for use in this application.Power can be provided by a battery with 7V.Applied input voltage of 24V does not damage the device.Having the output voltage set to 4.512V may result in high efficiency.During operation, 1mA represents the output current.There is a subcategory of Power Management Circuits for this device.The device can operate at as low a supply voltage as possible, such as 5V.It is mounted in the manner of Surface Mount. BQ24751RHDT FeaturesBattery pack voltage of 18.048V Max 1 channels Power Management Circuits subcategory 28-VFQFN Exposed Pad package BQ24751RHDT ApplicationsThere are a lot of Texas Instruments BQ24751RHDT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24753ARHDR OverviewThere is a package for Tape & Reel (TR) in which it can be found.There is a 28-VFQFN Exposed Pad package included with this item that you will need to take care of.Mounting type Surface Mount matches the device.This is the right thing to do: set the temperature to -40°C~125°C TJ.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.To charge the device, there is a requirement for Constant - Programmable current.Based on the base part number BQ24753, it is possible to find related parts for this device.Among its terminations, there are 28.In the case of the battery pack, it is 18.048V Max.A total of 28 pins are present on it.This product requires that a total of 28 pins be connected in order for it to work correctly.This application has a total of 1 channels that can be used.Power can be provided by a battery with 20V.It is crucial that the supply voltage of the device does not exceed 24V for the device to work properly.It is performed with a current output of 10A for the output of the operation.It can function at as low a supply voltage as possible, such as 8V.It has a 7V volt minimum input voltage.This part has a switching frequency of 300kHz and operates with this frequency. BQ24753ARHDR FeaturesBattery pack voltage of 18.048V Max 1 channels Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24753ARHDR ApplicationsThere are a lot of Texas Instruments BQ24753ARHDR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC2906NG4 OverviewThis item can be found in the Tube package.It is contained in a package named 16-DIP (0.300, 7.62mm).A Through Hole mounting type is assigned to the device.If the temperature is set to -40°C~70°C TA, reliable performance will be assured.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.If you use the base part number UC2906, you can look for related parts.It has a total of 16 terminations.With 16 pins on it, it has a very simple design.This device has a number of programmable features, including Current.You need 16 pins for it to work.It is possible to access 1 channels.It should be able to run off of a 10V battery.Withstanding a voltage of 40V, it is a reliable piece of equipment.40V output voltages can result in high efficiency.When the operation is completed, the output current is 40mA.In order to ensure normal operation, the supply voltage (Vsup) should be kept above 5V.As a result of the reduction in maximum output current, the output current should be kept below 40mA during operation. UC2906NG4 Features1 channels 16-DIP (0.300, 7.62mm) package UC2906NG4 ApplicationsThere are a lot of Texas Instruments UC2906NG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24150YFFT OverviewIn the Tape & Reel (TR) package, you will find it.It is contained in a package named 20-UFBGA, DSBGA.The device is mounted with mounting type Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.This device makes use of an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT.To charge the device, you need Constant current.Based on the base part number BQ24150, its related parts can be identified.In total, there are 20 terminations.There is a setting of 4.44V Max for the battery pack.The device has a total of 20 pins.Among the programmable features are Current, Timer, Voltage.Product functionality is dependent on 20 pins.Channels are available in an amount of 1.Batteries with a 5V voltage are compatible with it.A supply voltage of no more than 6V is required for the device to operate properly.A 4.44V output voltage provides high efficiency.In order to operate, an output current of 1.2A is used.This device is a member of subcategory Power Management Circuits.It can function at as low a supply voltage as possible, such as 4V.It is configured to be 5mA for Vsup (maximum supply voltage).A power supply setting of 0 has been assigned to the part.Voltage input must be at least 4V volts.The gadget's supply is running at 35μA volts.A switching frequency of 3MHz is present in the part.During operation, the maximum output current is reduced to 1.25A. BQ24150YFFT FeaturesBattery pack voltage of 4.44V Max 1 channels Power Management Circuits subcategory Switching frequency of 3MHz 20-UFBGA, DSBGA package BQ24150YFFT ApplicationsThere are a lot of Texas Instruments BQ24150YFFT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24705RGET OverviewThis item can be found in the Tape & Reel (TR) package.There is a 24-VFQFN Exposed Pad package included with this item that you will need to take care of.Mounting type Surface Mount is chosen for the device.The correct temperature setting is -40°C~125°C TJ.POWER SUPPLY MANAGEMENT CIRCUIT is the analog IC used in this device.Providing Constant - Programmable current to the device is the only way to charge it.It is possible to find the related parts of this device by looking at its base part number BQ24705.There are 24 terminations in it.It is a 18V Max voltage for the battery pack.24 pins are attached to it.The operation?are 24 pins.A total of 1 channels are available for use.It can be powered by a battery with 20V.Applied input voltage of 24V does not damage the device.In the case of 18V, the output voltage is likely to produce high efficiency.In this case, the output current of the device is set to 8A.At a low supply voltage, such as 5V, it can operate to the best of its ability.As far as the mounting is concerned, it is mounted in the way of Surface Mount.There is 8A current flowing through the gadget's supply.A switching frequency of 600kHz is present in the part.Input voltage is limited to 24V volts.In order for the operation to be carried out successfully, a maximum output supply voltage of 18V is required. BQ24705RGET FeaturesBattery pack voltage of 18V Max 1 channels Switching frequency of 600kHz 24-VFQFN Exposed Pad package BQ24705RGET ApplicationsThere are a lot of Texas Instruments BQ24705RGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24745RHDTG4 OverviewThe package that has it is the Tape & Reel (TR) package.We've included it in the 28-VFQFN Exposed Pad package so that it's easier to use.The device's mounting type is Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.A charge of Constant - Programmable current is required to be applied to the device.It is possible to find the related parts of this device by looking at its base part number BQ24745.In total, there are 28 terminations.A battery pack is going to have a voltage of 19.2V Max.28 pins are included in the package.For the product to work properly, 28 pins must be connected in order to make it work.A total of 1 channels are available for use.As their maximum supply voltage, devices require 24V.Power can be provided by a battery with 20V.It is important that the supply voltage does not exceed 24V for the device to work properly.In the case of 19.2V output voltage, there is a possibility of optimal efficiency.There is 8A output current when the device operates.Devices belonging to subcategory Power Management Circuits include this device.A supply voltage of 7V is suitable for it, because it can operate with a low supply voltage.12mA is set for Vsup (maximum supply voltage).It has a 7V volt minimum input voltage.The part has 300kHz switching frequency.In order to comply with the constraints, the maximum output current is reduced to 8.064A. BQ24745RHDTG4 FeaturesBattery pack voltage of 19.2V Max 1 channels Power Management Circuits subcategory Switching frequency of 300kHz 28-VFQFN Exposed Pad package BQ24745RHDTG4 ApplicationsThere are a lot of Texas Instruments BQ24745RHDTG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24003PWP OverviewIt is included in the Tube package for convenience.It is contained in a package named 20-PowerTSSOP (0.173, 4.40mm Width).This device is mounted using type Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~70°C TA.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.If the device needs to be charged, it must be supplied with Constant current.There are related parts to this device according to the base part number BQ24003.Taking it as a whole, it has been concluded that there are 20 terminations to be found.A battery pack is going to have a voltage of 4.2V.20 pins are attached to it.This feature allows for programmability, such as Current, Timer.In order for it to work, it requires 20 pins.Currently, there are 1 channels available.Batteries with a 5V voltage are compatible with it.With a 10V supply voltage, it is capable of withstanding the operation of the device.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.This device operates with a current output of 1.2A.Using a supply voltage as low as 4.5V will allow it to function.The input voltage is set to 4.5V volts.Furthermore, the device can generate OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE features as well. BQ24003PWP FeaturesBattery pack voltage of 4.2V 1 channels Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-PowerTSSOP (0.173, 4.40mm Width) package BQ24003PWP ApplicationsThere are a lot of Texas Instruments BQ24003PWP Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24704RGET OverviewThere is a package Tape & Reel (TR) available.In the package 24-VFQFN Exposed Pad, there is a version of it.In this case, the device is mounted in the way of Surface Mount.It is best to set the temperature to -40°C~125°C TJ in order to prevent the system from overheating.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The device requires Constant - Programmable current to charge.Parts related to the base part number BQ24704 can be found based on that number.As you can see, it has 24 terminations in it.For the battery pack, it is set to 18V Max.The device has a total of 24 pins.A maximum charging current of 8A is achieved by the part.In order for the product to be functional, it requires that you connect the 24 pins according to the instructions.A total of 1 channels are available for use.24V is the maximum supply voltage for the device.A battery with 0V would be enough for it to run.If the supply voltage exceeds 14V, the device will not function properly.In the case of 18V output voltage, there is a possibility of optimal efficiency.Operation is achieved by providing a 1mA output current.This device can work at as low a voltage as possible, such as 7V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.This gadget's power supply has a current of 7μA flowing through it.As far as switching frequency is concerned, the part runs at 300kHz. BQ24704RGET FeaturesBattery pack voltage of 18V Max 1 channels Switching frequency of 300kHz 24-VFQFN Exposed Pad package BQ24704RGET ApplicationsThere are a lot of Texas Instruments BQ24704RGET Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9468UKBZ OverviewThe package that has it is the Tape & Reel (TR) package. PCA9468UKBZ FeaturesPCA9468UKBZ ApplicationsThere are a lot of NXP USA Inc. PCA9468UKBZ Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2054PN OverviewThis can be found in the Tube package.To make it easier for you, it is included with the 16-DIP (0.300, 7.62mm) package.Mounting type Through Hole is chosen for the device.It is best to set the temperature to -20°C~70°C TA.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Device charging requires Constant current.Parts related to the base part number BQ2054 can be found based on that number.In total, there are 16 terminations.It is equipped with 16 pins.The operation?are 16 pins.To ensure the device works properly, the supply voltage should not exceed 5.5V.The operation is carried out with an output current of 2A.The device can operate at as low a supply voltage as possible, such as 4.5V.Input voltage is limited to 4.5V volts at the lowest.Input voltage is 5V.For best results, set the supply voltage to 5V.In this particular part, the switching frequency is set to 100kHz. BQ2054PN FeaturesSwitching frequency of 100kHz 16-DIP (0.300, 7.62mm) package BQ2054PN ApplicationsThere are a lot of Texas Instruments BQ2054PN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9491AUKZ OverviewThis item can be found in the Tape & Reel (TR) package. PCA9491AUKZ FeaturesPCA9491AUKZ ApplicationsThere are a lot of NXP USA Inc. PCA9491AUKZ Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9431HKZ OverviewIt is included in the Tape & Reel (TR) package. It comes as part of the 16-XFQFN package.It appears that the device's mounting type is Surface Mount. PCA9431HKZ Features16-XFQFN package PCA9431HKZ ApplicationsThere are a lot of NXP USA Inc. PCA9431HKZ Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC3909N OverviewThere is a package for Tube in which it can be found.There is a 20-DIP (0.300, 7.62mm) package included with this item that you will need to take care of.The device's mounting type is Through Hole.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.To charge the device, there is a requirement for Constant - Programmable current.It is possible to find related parts of this device by using the base part number UC3909.There are no terminations in it at all.There are 20 pins on it.You need 20 pins for it to work.It can be powered by a battery with 15V.As long as the supply voltage is 40V, it is capable of withstanding the voltage.In the case of 5.25V output voltage, there is a possibility of optimal efficiency.With an output current of 0, the operation is carried out.The device falls under the Power Management Circuits subcategory.Using a supply voltage as low as 7.5V will allow it to function.In order to ensure optimum supply voltage, the maximum voltage setting is set to 19mA.When it comes to the part's power supply, it is set to 15V.The device has an input voltage of 15V.As far as switching frequency is concerned, the part runs at 242kHz.It can accept a maximum input voltage of 40V volts.Voltage 6.2V is the maximum output voltage needed for this operation.During operation, the maximum output current is reduced to 100mA. UC3909N FeaturesPower Management Circuits subcategory Switching frequency of 242kHz 20-DIP (0.300, 7.62mm) package UC3909N ApplicationsThere are a lot of Texas Instruments UC3909N Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2054PNG4 OverviewIt is included in the Tube package for convenience.It is contained in a package named 16-DIP (0.300, 7.62mm).In this case, the device is mounted in the way of Through Hole.Keeping the temperature at -20°C~70°C TA will ensure reliable performance.If the device needs to be charged, it must be supplied with Constant current.There are related parts to this device according to the base part number BQ2054.There is a preference for devices with 5.5V maximum supply voltages. BQ2054PNG4 Features16-DIP (0.300, 7.62mm) package BQ2054PNG4 ApplicationsThere are a lot of Texas Instruments BQ2054PNG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3420M5-16.8/NOPB OverviewThere is an Cut Tape (CT) package that contains it. The SC-74A, SOT-753 package includes it as a convenience.In this case, the device is mounted in the way of Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.It provides its functionality by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Based on the base part number LM3420, it is possible to find related parts for this device.It is possible to find a total of 5 terminations.There is 16.8V voltage in the battery pack.The device has a total of 5 pins.A total of 1 channels are available.It is recommended to use devices with a maximum supply voltage of 20V.With 16.8V, you can use a battery to power it.There is one subcategory of this device, and it is Power Management Circuits. LM3420M5-16.8/NOPB FeaturesBattery pack voltage of 16.8V 1 channels Power Management Circuits subcategory SC-74A, SOT-753 package LM3420M5-16.8/NOPB ApplicationsThere are a lot of Texas Instruments LM3420M5-16.8/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3621M/NOPB OverviewThe package that has it is the Tube package.Located in package 16-SOIC (0.154, 3.90mm Width), it can be found there.Mounting type Surface Mount is chosen for the device.It is best to set the temperature to 0°C~70°C TA.For the device to be charged, there is Constant current required.It is possible to find the related parts to the base part number LM3621.The number of terminations found in it is 16 as a whole.A battery pack is going to have a voltage of 4.2V.It operates on the basis of 16 pins.It should be able to run off a battery of 4.2V.The device can withstand a supply voltage of 5.5V.There is 20mA output current when the device operates.Devices in this category are classified as Power Management Circuits.At a low supply voltage, such as 3V, it can operate to the best of its ability.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.Vsup (maximum supply voltage) is set in the command to 5mA.The part's power supply is set to a value of 4.2V. LM3621M/NOPB FeaturesBattery pack voltage of 4.2V Power Management Circuits subcategory 16-SOIC (0.154, 3.90mm Width) package LM3621M/NOPB ApplicationsThere are a lot of Texas Instruments LM3621M/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2031SN-A5G4 OverviewYou can find it in the Tube package.The product comes in the package of a 16-SOIC (0.154, 3.90mm Width).Mounting type for the device is Surface Mount.If you wish to ensure reliable performance, set the temperature to -20°C~70°C TA.It uses an analog integrated circuit of type BATTERY CHARGE CONTROLLER.To charge the device, there is a requirement for Constant Pulsed current.It is possible to find the related parts of this device by looking at its base part number BQ2031.The overall number of terminations that can be found in it is 16 as a whole.In total, it has 16 pins.It is possible to program features such as Current, Timer, Voltage.As far as the charging current is concerned, it is 5mA at full charge.There are 16 pins necessary to make it work.It is important that the supply voltage does not exceed 5.5V for the device to work properly.In this case, the output current of the device is set to 2A.The device can operate at as low a supply voltage as possible, such as 4.5V.There is a 4.5V volt minimum input voltage requirement.Input voltage is 5V.If you want to maximize efficiency, you should set the voltage to 5V.As far as switching frequency is concerned, the part runs at 100kHz. BQ2031SN-A5G4 FeaturesSwitching frequency of 100kHz 16-SOIC (0.154, 3.90mm Width) package BQ2031SN-A5G4 ApplicationsThere are a lot of Texas Instruments BQ2031SN-A5G4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3622M-8.4/NOPB OverviewIt comes in the package?of a Tube. For convenience, it is included in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting type is assigned to the device.The best thing to do is to set the temperature to -20°C~70°C TA.The device relies on an analog IC called BATTERY CHARGE CONTROLLER to operate.To charge the device, there is a requirement for Constant current.This device's related parts can be found under the base part number LM3622.It contains 8 terminations, so that is how many there are.There are 8 pins on it, so it has a very simple design.To operate the product, it is necessary that 8 pins be inserted into the device.A supply voltage of no more than 24V is required for the device to operate properly.There is a possibility of high efficiency if the output voltage is set to 8.4V.The operation is carried out with an output current of 25mA.This device is classified as Power Management Circuits under the subcategory.A supply voltage of 4.5V is suitable for it, because it can operate with a low supply voltage.Amounting is in line with Surface Mount.Input voltage is 5V. LM3622M-8.4/NOPB FeaturesPower Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package LM3622M-8.4/NOPB ApplicationsThere are a lot of Texas Instruments LM3622M-8.4/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2057DGKR OverviewIf you are looking for it in the Tape & Reel (TR) package, then you have found it.It can be found in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Mounting type Surface Mount is chosen for the device.This is the right thing to do: set the temperature to -20°C~70°C TA.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.Charge the device by supplying it with Constant - Programmable current.It is possible to find the related parts of this device by looking at its base part number BQ2057.The overall number of terminations that can be found in it is 8 as a whole.Pins 8 are included.Features such as Current are programmable.Product functionality is dependent on 8 pins.A total of 1 channels are available for use.Battery voltage should be 5V.15V supply voltage is not a problem for it.Using a 4.1V output voltage results in high efficiency.A 40mA output current is used for operation.Subcategory 0 is home to this device.This device can work at as low a voltage as possible, such as 4.5V.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.It is set to 4mA for Vsup (maximum supply voltage). BQ2057DGKR Features1 channels Power Management Circuits subcategory 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package BQ2057DGKR ApplicationsThere are a lot of Texas Instruments BQ2057DGKR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3622AM-8.4/NOPB OverviewThere is an Tube package that contains it. There is a 8-SOIC (0.154, 3.90mm Width) package that comes with this item.Mounting type for the device is Surface Mount.Ideally, the temperature should be set to -20°C~70°C TA in order to ensure reliable performance.This device makes use of an analog IC called BATTERY CHARGE CONTROLLER in order to provide its functionality.Device charging requires Constant current.The base part number LM3622 represents its related parts.There are 8 terminations in it.The device consists of 8 pins, which are arranged in a row.This product requires that a total of 8 pins be connected in order for it to work correctly.As long as the supply voltage is 24V, it is capable of withstanding the voltage.Using a 8.4V output voltage results in high efficiency.A 25mA output current is used for operation.Devices belonging to subcategory Power Management Circuits include this device.This device can work at as low a voltage as possible, such as 4.5V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.5V is the input voltage for the device. LM3622AM-8.4/NOPB FeaturesPower Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package LM3622AM-8.4/NOPB ApplicationsThere are a lot of Texas Instruments LM3622AM-8.4/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3620M5X-8 OverviewThe Tape & Reel (TR) package contains it.There is a SC-74A, SOT-753 package that comes with this item.A mounting type of Surface Mount has been specified for this device.A temperature setting of 0°C~70°C TA would be the best thing to do.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Identify its related parts based on the base part number LM3620.The overall number of terminations that can be found in it is 5 as a whole.Hence, the battery pack is at 8.4V when it comes to voltage.Those devices that have a maximum supply voltage of 30V are recommended for use.In the case of 8.2V output voltage, there is a possibility of optimal efficiency.A 5V voltage input is present in the device.There is a minimum input voltage of 4V volts.An input voltage of 30V is the maximum for this device. LM3620M5X-8 FeaturesBattery pack voltage of 8.4V SC-74A, SOT-753 package LM3620M5X-8 ApplicationsThere are a lot of Texas Instruments LM3620M5X-8 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24007PWP OverviewThere is a package named Tube that contains it.For convenience, it is included in the 20-PowerTSSOP (0.173, 4.40mm Width) package.Mounting type Surface Mount is chosen for the device.Setting the temperature to -40°C~70°C TA is the right thing to do.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.Providing Constant current to the device is the only way to charge it.The base part number BQ24007 can be used to locate related parts for this device.It has 20 terminations.The battery pack is set to 4.2V when it comes to the battery.Pins 20 are included.Current, Timer, for example, can be programmed.Product functionality is dependent on 20 pins.It appears that there are 1 channels available at this time.Battery voltage should be 5V.To ensure the device works properly, the supply voltage should not exceed 10V.With a 4.2V output voltage, high efficiency is possible.When the operation is completed, the output current is 1.2A.There is a subcategory of Power Management Circuits for this device.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.A minimum input voltage of 4.5V volts is required for this device.The additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE can also be generated with this device. BQ24007PWP FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-PowerTSSOP (0.173, 4.40mm Width) package BQ24007PWP ApplicationsThere are a lot of Texas Instruments BQ24007PWP Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3420M5-4.2 OverviewYou can find it in the Tape & Reel (TR) package.We've included it in the SC-74A, SOT-753 package so that it's easier to use.A mounting type of Surface Mount has been specified for this device.Keeping the temperature at -40°C~85°C TA is the right choice.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Based on the base part number LM3420, its related parts can be identified.As far as the terminations are concerned, there are 5.4.2V is the voltage for the battery pack.The device consists of 5 pins, which are arranged in a row.It is possible to use a total of 1 channels.20V is the maximum supply voltage for the device.It should be able to run off a battery of 4.2V. LM3420M5-4.2 FeaturesBattery pack voltage of 4.2V 1 channels SC-74A, SOT-753 package LM3420M5-4.2 ApplicationsThere are a lot of Texas Instruments LM3420M5-4.2 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ24204DGN OverviewIt is available in the package Tube.A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is included with this item as part of its contents.This device has a mounting type of Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The device requires Constant current to charge.This device's related parts can be found under the base part number BQ24204.I have found that the number of terminations found in it as a whole is 8.In the battery pack, the voltage is 4.2V.It is equipped with 8 pins.You can program a number of features, including Current, Timer.For the product to work properly, 8 pins must be connected in order to make it work.The number of channels available is 1.It is crucial that the supply voltage of the device does not exceed 13.5V for the device to work properly.Using a 4.1V output voltage results in high efficiency.There is a constant output current of 500mA when it is operating.The device falls under the Power Management Circuits subcategory.This device can work at as low a voltage as possible, such as 2.8V.2.5mA is set for Vsup (maximum supply voltage).The input voltage is set to 2.8V volts.Furthermore, the device can generate OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE features as well. BQ24204DGN FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package BQ24204DGN ApplicationsThere are a lot of Texas Instruments BQ24204DGN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3420AM5X-8.2 OverviewIt is available in the package Tape & Reel (TR).It comes as part of the SC-74A, SOT-753 package.The mounting type of the device is Surface Mount.Ensure reliable performance by setting the temperature to -40°C~85°C TA.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.It is possible to find related parts of this device by using the base part number LM3420.A total of 5 terminations can be found in it.For the battery pack, it is 8.2V.In total, it has 5 pins.A total of 1 channels are available for use.The maximum supply voltage of the device is 20V.It can be powered by a battery with 8.2V. LM3420AM5X-8.2 FeaturesBattery pack voltage of 8.2V 1 channels SC-74A, SOT-753 package LM3420AM5X-8.2 ApplicationsThere are a lot of Texas Instruments LM3420AM5X-8.2 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3622MX-8.4 OverviewThere is a package named Tape & Reel (TR) that contains it.With this item, there is a 8-SOIC (0.154, 3.90mm Width) package that comes with it.This device has a mounting type of Surface Mount.The temperature should be set to -20°C~70°C TA to ensure reliable performance.In order to provide its functionality, this device uses an analog IC called BATTERY CHARGE CONTROLLER.For the device to be charged, there is Constant current required.You can find this device's related parts by searching the base part number LM3622.As far as the terminations are concerned, there are 8.8.4V is the voltage for the battery pack.The device has a total of 8 pins.In general, it is recommended to use devices with 24V maximum supply voltages.The 8.4V output voltage allows for high efficiency.A mounting requires that it align itself with Surface Mount.Input voltage is 5V.The device can also generate the additional features of SEATED HGT-NOM.Input voltage should not be less than 4.5V volts. LM3622MX-8.4 FeaturesBattery pack voltage of 8.4V Addtional features of SEATED HGT-NOM 8-SOIC (0.154, 3.90mm Width) package LM3622MX-8.4 ApplicationsThere are a lot of Texas Instruments LM3622MX-8.4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3420M5X-8.2 OverviewThere is a package for Tape & Reel (TR) in which it can be found.There is currently a package available named SC-74A, SOT-753.There is a type of mounting for this device: Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.The related parts of the base part number LM3420 can be found by following the order of the base part number.Taking it as a whole, it has been concluded that there are 5 terminations to be found.Battery pack voltage is 8.2V.In total, it has 5 pins.There are a total of 1 channels available for your use.It is recommended to use devices with a maximum supply voltage of 20V.Batteries with 8.2V should be able to power it. LM3420M5X-8.2 FeaturesBattery pack voltage of 8.2V 1 channels SC-74A, SOT-753 package LM3420M5X-8.2 ApplicationsThere are a lot of Texas Instruments LM3420M5X-8.2 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3622AMX-4.2 OverviewThis can be found in the Tape & Reel (TR) package.In order to make it more convenient, it has been included in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is chosen for the device.Setting the temperature to -20°C~70°C TA is the right thing to do.BATTERY CHARGE CONTROLLER is the analog IC used in this device.The device needs to be charged at a current of Constant in order to function.Based on the base part number LM3622, it is possible to find related parts for this device.As you can see, it has 8 terminations in it.4.2V is the voltage for the battery pack.8 pins are on it in total.Devices with 24V maximum supply voltages are recommended.The 4.2V output voltage allows for high efficiency.It is mounted in the manner of Surface Mount.A 5V voltage input is present in the device.In addition to the features above, the device can also generate the following features of SEATED HGT-NOM.Input voltage must be no less than 4.5V volts.24V is its maximum input voltage. LM3622AMX-4.2 FeaturesBattery pack voltage of 4.2V Addtional features of SEATED HGT-NOM 8-SOIC (0.154, 3.90mm Width) package LM3622AMX-4.2 ApplicationsThere are a lot of Texas Instruments LM3622AMX-4.2 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM3621MX OverviewThere is a package Tape & Reel (TR) available.In order to make it more convenient, it has been included in the 16-SOIC (0.154, 3.90mm Width) package.In this case, the device is mounted in the way of Surface Mount.To ensure reliable performance, the temperature should be set to 0°C~70°C TA.Using an analog IC of type BATTERY CHARGE CONTROLLER, this device is able to communicate with the outside world.To charge the device, you will need to supply it with Constant of current.Identify its related parts based on the base part number LM3621.A total of 16 terminations can be found in it.There is a setting of 4.2V for the battery pack.There is 5.5V maximum supply voltage for this device.A mounting requires that it align itself with Surface Mount.The device has an input voltage of 4.2V.It is necessary to have a 3V volt input voltage.There is a maximum input voltage of 5.5V for this device. LM3621MX FeaturesBattery pack voltage of 4.2V 16-SOIC (0.154, 3.90mm Width) package LM3621MX ApplicationsThere are a lot of Texas Instruments LM3621MX Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LP3946LD/NOPB OverviewThe package Tape & Reel (TR) contains it, and you can find it there.To make it easier for you, it is included with the 14-WFDFN Exposed Pad package.Amounting type Surface Mount is the one associated with the device.This is the right thing to do: set the temperature to -40°C~85°C TA.To charge the device, Constant - Programmable current is required.There are related parts for this device under the base part number LP3946.There is 4.2V voltage in the battery pack.According to the manufacturer, it is rated at 950mA at maximum charging current.Its maximum supply voltage is 6V.It is mounted in the same way as Surface Mount. LP3946LD/NOPB FeaturesBattery pack voltage of 4.2V 14-WFDFN Exposed Pad package LP3946LD/NOPB ApplicationsThere are a lot of Texas Instruments LP3946LD/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.