My CartGrounding Braid, Straps(2795)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | MUX36S08IRRJR OverviewPresented in 16-WQFN Exposed Pad, this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. The multiplexer consists of 1 circuits. Try searching with 36S08 if you're looking for variants. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The data can be transferred over a wide range of bandwidths, called 500MHz bandwidths. MUX36S08IRRJR Features8 Channels Bandwidth: 500MHz MUX36S08IRRJR ApplicationsThere are a lot of Texas Instruments MUX36S08IRRJR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36S16IRTVR OverviewThe electrical component comes in 32-WFQFN Exposed Pad packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 16:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C. There are 32 terminations totally. A 16 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with 36S16. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There are 500MHz bandwidths for data transfer. MUX36S16IRTVR Features16 Channels Bandwidth: 500MHz MUX36S16IRTVR ApplicationsThere are a lot of Texas Instruments MUX36S16IRTVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36D08IDWR OverviewPresented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. Totally, there are 28 terminations. A 8 channel electronic part produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 2 circuits in this multiplexer. Using the 36D08 search parameter, you can discover variants of the switch. For details about the functions of 28 pins, please refer to the datasheets. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A 500MHz-bandwidth can be used for data transfer. MUX36D08IDWR Features8 Channels Bandwidth: 500MHz MUX36D08IDWR ApplicationsThere are a lot of Texas Instruments MUX36D08IDWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36D08IRSNR OverviewPacked in 32-WFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. An extended operating temperature of -40°C~125°C degrees Celsius. Totally, there are 32 terminations. The electronic part delivers high-quality output through its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. 2 circuits are used in this analogue multiplexer. Try searching with 36D08 to find analog multiplexer variants. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. This switch operates within the bandwidth of 500MHz. MUX36D08IRSNR Features8 Channels Bandwidth: 500MHz MUX36D08IRSNR ApplicationsThere are a lot of Texas Instruments MUX36D08IRSNR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36S16IRSNR OverviewShipping overseas is convenient due to the electrical component's packing in 32-WFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 16:1. The operating temperature is extended to around -40°C~125°C. Total terminations are 32. As a result of its 16 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. Circuits number 1 make up this analogue multiplexer. Use 36S16 to search for variants of the digital switches. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There are various bandwidths available for data transfer. MUX36S16IRSNR Features16 Channels Bandwidth: 500MHz MUX36S16IRSNR ApplicationsThere are a lot of Texas Instruments MUX36S16IRSNR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4051BEE4 OverviewThe electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Using the CD4051 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 240Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 3V. This multiplexer would work with 80nA current. There is no problem with using dual supply voltage, but it should not exceed 9V. In the case of dual power supplies, you should connect at least 2.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 18V operating voltages. The electrical component supports 8 inputs. There are various bandwidths available for data transfer. CD4051BEE4 Features8 Channels 80nA Supply Current Bandwidth: 20MHz CD4051BEE4 ApplicationsThere are a lot of Texas Instruments CD4051BEE4 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A4624DCKT OverviewPacked in 6-TSSOP, SC-88, SOT-363, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 6. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. Into the electrical component body are injected 6 pins. SPDT switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with TS5A4624. This digital multiplexer has 900mOhm internal resistance. Please refer to the datasheets for 6 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 10nA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. If put voltage greater than 50nA on the device, damage may be caused to the analogue multiplexer. Operating 1 inputs is required. 100MHz bandwidths enable data to be transferred. The analog switch ics has 2 outputs. TS5A4624DCKT Features1 Channels Switch Circuit: SPDT 10nA Supply Current -3db Bandwidth: 90MHz Bandwidth: 100MHz TS5A4624DCKT ApplicationsThere are a lot of Texas Instruments TS5A4624DCKT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC2G53DCUT OverviewThis electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. 8 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 2.3V voltage supply. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with 74LVC2G53. There is 13Ohm internal resistance in this digital multiplexer. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexers or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. 1.65V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1μA. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The analog switch ic utilizes COMMON OUTPUT outputs in total. Operating 2 inputs is required. In 300MHz-bandwidths, data can be transferred. SN74LVC2G53DCUT Features2 Channels Switch Circuit: SPDT 1μA Supply Current -3db Bandwidth: 300MHz Bandwidth: 300MHz SN74LVC2G53DCUT ApplicationsThere are a lot of Texas Instruments SN74LVC2G53DCUT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A23160DGST OverviewThe electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 10 terminations. A high-quality output is provided by the electrical component's 2 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 10 series. A SPDT switching circuit is used for these analog switches. Try searching with TS5A23160 to find analog multiplexer variants. As far as internal resistance is concerned, it has 900mOhm. For details about the functions of 10 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 1.65V. 10nA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 500nA, damage can occur. Operating the 2 inputs requires 2 inputs. A 95MHz-bandwidth can be used for data transfer. Drain to Source resistance is 900mOhm. 4 outputs are included in the analogue multiplexer. TS5A23160DGST Features2 Channels Switch Circuit: SPDT 10nA Supply Current Bandwidth: 95MHz Drain-to-Source resistance: 900mOhm TS5A23160DGST ApplicationsThere are a lot of Texas Instruments TS5A23160DGST Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS3A5018PW OverviewAs the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Multiplexers built on a SPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with TS3A5018. This digital multiplexer has 10Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 3.6V. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 2.3V should be applied to the electronic component. This digital switch can be operated with a current of 2.5μA. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. The analogue multiplexer may be damaged if voltage is greater than 7μA. 3V operating voltages can be used with this electrical part. Operating 4 inputs is required. A 300MHz-bandwidth can be used for data transfer. The analogue multiplexer has 8 outputs. TS3A5018PW Features4 Channels Switch Circuit: SPDT 2.5μA Supply Current Bandwidth: 300MHz TS3A5018PW ApplicationsThere are a lot of Texas Instruments TS3A5018PW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4316M OverviewShipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Use 74HC4316 to search for variants of the digital switches. An switch multiplexer with 170Ohm internal resistance has a value of 170Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. An effective Dual, Single supply digital multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. A voltage higher than 160μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIf you are using dual power supplies, you should attach at least 1V. 200MHz-bandwidths can be used to transfer data between multiplexers. Check out the electrical component's additional features, such as the following: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY. Drain to Source resistance for this electronic component is 170Ohm. CD74HC4316M Features4 Channels Switch Circuit: SPST - NO Bandwidth: 200MHz Additional Features: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY Drain-to-Source resistance: 170Ohm CD74HC4316M ApplicationsThere are a lot of Texas Instruments CD74HC4316M Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4053APW OverviewPacked in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. It is safe to turn on and run the electronic component with a 2.3V voltage supply. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Circuits number 3 make up this analogue multiplexer. Try searching with 74LV4053 if you're looking for variants. A 100Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 2V. For this digital switch to work, 20μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It is possible to operate 6 inputs. A 50MHz-bandwidth can be used for data transfer. SN74LV4053APW Features2 Channels Switch Circuit: SPDT 20μA Supply Current Bandwidth: 50MHz SN74LV4053APW ApplicationsThere are a lot of Texas Instruments SN74LV4053APW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4066APW OverviewDue to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 14 terminations have been made so far. By its 4 channels, the electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 14 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74LV4066 if you are looking for analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. Please refer to the datasheets for 14 pins functions. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 20μA. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 20μA. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 50MHz-bandwidths can be used to transfer data between multiplexers. SN74LV4066APW Features4 Channels Switch Circuit: SPST - NO 20μA Supply Current Bandwidth: 50MHz SN74LV4066APW ApplicationsThere are a lot of Texas Instruments SN74LV4066APW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4351M OverviewDue to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. In total, 20 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There are 20 pins injected into the electronic part body. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4351. Analog switches have 130Ohm internal resistance. Please refer to the datasheets for 20 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. You should attach at least 1V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. It is possible to operate 8 inputs. The transfer of data can be performed over 180MHz bandwidths. CD74HC4351M Features1 Channels -3db Bandwidth: 145MHz Bandwidth: 180MHz CD74HC4351M ApplicationsThere are a lot of Texas Instruments CD74HC4351M Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4053PWT OverviewShipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -55°C~125°C TA. There are 16 terminations totally. Due to its 2 channels, the electrical component produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. Unlike digital switches, these are based on SPDT switching circuits. The multiplexer consists of 3 circuits. Use 74HC4053 to search for variants of the digital switches. As far as internal resistance is concerned, it has 180Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. Despite this switch device's dual supply capability, its voltage should not exceed 5V. With dual power supplies, you should attach at least 1V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical component supports 6 inputs. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. CD74HC4053PWT Features2 Channels Switch Circuit: SPDT Bandwidth: 200MHz CD74HC4053PWT ApplicationsThere are a lot of Texas Instruments CD74HC4053PWT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4053APWT OverviewAs the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 2 channels. When the electronic component is given a voltage of 2.3V, it should be turned on and run. 16 pins are injected to the electronic part body. Multiplexers built on a SPDT switching circuit are built. There are 3 circuits in this switch device. 74LV4053 can be used to search for analog multiplexer variants. An switch multiplexer with 180Ohm internal resistance has a value of 180Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 20μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating the 6 inputs requires 6 inputs. This switch operates within the bandwidth of 50MHz. SN74LV4053APWT Features2 Channels Switch Circuit: SPDT 20μA Supply Current Bandwidth: 50MHz SN74LV4053APWT ApplicationsThere are a lot of Texas Instruments SN74LV4053APWT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4066MT OverviewPresented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -55°C~125°C TA extended. In total, there are 14 terminations. A high-quality output is provided by the electrical component's 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for the analog switch ic with 74HC4066 if you are looking for variants. In this multiplexer, the internal resistance is 70Ohm. For details about the functions of 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 10V voltage to the switch device. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2V~10V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 16μA. It is possible to transfer data over a 200MHz-bandwidth. CD74HC4066MT Features4 Channels Switch Circuit: SPST - NO Bandwidth: 200MHz CD74HC4066MT ApplicationsThere are a lot of Texas Instruments CD74HC4066MT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | HD3SS3411IRWAT OverviewDue to its 14-WFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~105°C TA. In total, there have been 14 terminations. High-quality output is provided by the electronic component's 1 channels. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. A total of 1 circuits make up this switch device. HD3SS3411 can be used to search for analog multiplexer variants. For functions related to 14 pins, please refer to the datasheets. This analog switch requires a voltage of 3V~3.6V to drain from a single voltage supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A 7.5 GHz-bandwidth can be used for data transfer. HD3SS3411IRWAT Features1 Channels Bandwidth: 7.5 GHz HD3SS3411IRWAT ApplicationsThere are a lot of Texas Instruments HD3SS3411IRWAT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS3A5018D OverviewDue to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. These analog multiplexers are built based on SPDT switching circuits. Try searching for TS3A5018 variants of the analog switch ic. This digital multiplexer has 10Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. A analog switch ic that has a cost-effective Single supply type. 2.3V should be the lowest voltage fed to the electronic component. For this digital switch to work, 2.5μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 7μA. 3V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 4 inputs. There are various bandwidths available for data transfer. The analog switch ics has 8 outputs. TS3A5018D Features4 Channels Switch Circuit: SPDT 2.5μA Supply Current Bandwidth: 300MHz TS3A5018D ApplicationsThere are a lot of Texas Instruments TS3A5018D Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4051BMT OverviewPresented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 16. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. A total of 1 circuits make up this switch device. CD4051 can be used to search for analog multiplexer variants. A 1.05kOhm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 20V. A cost-effective Dual, Single supply type analogue multiplexer. There should be 3V voltage fed to the electrical part below 3V. The switch device would be able to operate with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 9V. You should attach at least 2.5V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. It can operate from 18V operating voltages. Operating the 8 inputs requires 8 inputs. A 20MHz-bandwidth can be used for data transfer. CD4051BMT Features8 Channels 80nA Supply Current Bandwidth: 20MHz CD4051BMT ApplicationsThere are a lot of Texas Instruments CD4051BMT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4053MT OverviewAs the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. A SPDT switching circuit is used for these analog switches. This multiplexer is composed of 3 circuits. Try searching with 74HC4053 if you're looking for variants. As far as internal resistance is concerned, it has 180Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 2V should be applied to the electronic component. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. A dual power supply should have at least 1V voltage attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating the 6 inputs requires 6 inputs. In 200MHz-bandwidths, data can be transferred. CD74HC4053MT Features2 Channels Switch Circuit: SPDT Bandwidth: 200MHz CD74HC4053MT ApplicationsThere are a lot of Texas Instruments CD74HC4053MT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC1G66QDCKRQ1 OverviewThe electronic component is convenient to ship overseas because it is packed in a 5-TSSOP, SC-70-5, SOT-353. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 5 terminations. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 2.3V voltage supply. As part of its design, the 5 series is equipped with this electronic component. SPST - NO switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with 74LVC1G66. This digital multiplexer has 10Ohm internal resistance. For details about the functions of 5 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. For this multiplexer to operate, 10μA current would be sufficient. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. In this switch multiplexer, there are COMMON OUTPUT outputs available. In 195MHz-bandwidths, data can be transferred. The series starts with Automotive, AEC-Q100. SN74LVC1G66QDCKRQ1 Features1 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 300MHz Bandwidth: 195MHz SN74LVC1G66QDCKRQ1 ApplicationsThere are a lot of Texas Instruments SN74LVC1G66QDCKRQ1 Analog Switches & Multiplexers ICs applications.
|
8254
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC4066RGYR OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 14-VFQFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 14. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 14 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with 74AHC4066. Internally, this switch multiplexer has a resistance of 75Ohm. For functions related to 14 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 20μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In 50MHz-bandwidths, data can be transferred. SN74AHC4066RGYR Features4 Channels Switch Circuit: SPST - NO Bandwidth: 50MHz SN74AHC4066RGYR ApplicationsThere are a lot of Texas Instruments SN74AHC4066RGYR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4052BPWRG4 OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is injected into the electrical part body with 16 pins. These analog multiplexers are built based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching for the analog switch ic with CD4052 if you are looking for variants. It has an internal resistance of 240Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. It would be sufficient to run this analogue multiplexer with 80nA current. If put voltage greater than 9V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 2.5V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages range from 18V. The 8 inputs need to be operated in order to work. A 25MHz-bandwidth can be used for data transfer. 4-bits are supported. CD4052BPWRG4 Features4 Channels Switch Circuit: SP4T 80nA Supply Current Bandwidth: 25MHz 4-Bit CD4052BPWRG4 ApplicationsThere are a lot of Texas Instruments CD4052BPWRG4 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4051ADGVR OverviewPresented in 16-TFSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. It is safe to turn on and run the electronic component with a 2.3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Circuits number 1 make up this analogue multiplexer. Try searching with 74LV4051 to find analog multiplexer variants. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. 20μA current would be enough for this multiplexer to operate. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. A 8 input needs to be operated. The transfer of data can be performed over 35MHz bandwidths. SN74LV4051ADGVR Features8 Channels 20μA Supply Current Bandwidth: 35MHz SN74LV4051ADGVR ApplicationsThere are a lot of Texas Instruments SN74LV4051ADGVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | NX3L2T66GM,125 OverviewPacked in 8-XFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. It is part of the design of the 8 series that this electronic component is included. These analog multiplexers are built based on SPST - NO switching circuits. The multiplexer consists of 2 circuits. Use NX3L2T66G to search for variants of the digital switches. Using a single voltage supply, this switch device consumes 1.4V~4.3V volts. NX3L2T66GM,125 FeaturesSwitch Circuit: SPST - NO -3db Bandwidth: 60MHz NX3L2T66GM,125 ApplicationsThere are a lot of NXP USA Inc. NX3L2T66GM,125 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AUC2G66DCTR OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 2 channels. Turning on and running the electrical part should be easy with a 1.1V voltage supply. 8 pins are injected to the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Use 74AUC2G66 to search for variants of the digital switches. Analog switches have 15Ohm internal resistance. The datasheets for the 8 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 2.7V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. 800mV is the lowest voltage the electrical component should receive. The switch device would be able to operate with 10μA current. This analogue multiplexer requires a voltage of 0.8V~2.7V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 10μA. The data can be transferred over a wide range of bandwidths, called 500MHz bandwidths. SN74AUC2G66DCTR Features2 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 50MHz Bandwidth: 500MHz SN74AUC2G66DCTR ApplicationsThere are a lot of Texas Instruments SN74AUC2G66DCTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AUC2G66YZPR OverviewShipping overseas is convenient with the electronic component packed in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. Powered by a 1.1V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74AUC2G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 2.7V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. There should be 800mV voltage fed to the electrical part below 800mV. The switch device would be able to operate with 10μA current. The voltage required by this switch device is 0.8V~2.7V, draining from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. COMMON OUTPUT outputs are utilized by this digital multiplexer. There are 500MHz bandwidths for data transfer. SN74AUC2G66YZPR Features2 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 50MHz Bandwidth: 500MHz SN74AUC2G66YZPR ApplicationsThere are a lot of Texas Instruments SN74AUC2G66YZPR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4051BQPWRQ1 OverviewPacked in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. This multiplexer is composed of 1 circuits. Using the CD4051 search parameter, you can discover variants of the switch. There is 240Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 20V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 5V should be applied to the electronic component. The switch device would be able to operate with 80nA current. For this switch, a dual supply voltage is feasible, but it must not exceed 10VWhen using dual power supplies, you should attach at least 2.5V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating 8 inputs is required. The transfer of data can be performed over 20MHz bandwidths. It belongs to the series Automotive, AEC-Q100. CD4051BQPWRQ1 Features8 Channels 80nA Supply Current Bandwidth: 20MHz CD4051BQPWRQ1 ApplicationsThere are a lot of Texas Instruments CD4051BQPWRQ1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT4316E OverviewThis electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPST - NO switching circuits. Search with 74HCT4316 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 170Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. If put voltage greater than 16μA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. Operating voltages range from 5V. There are 200MHz bandwidths for data transfer. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY. CD74HCT4316E Features4 Channels Switch Circuit: SPST - NO Bandwidth: 200MHz Additional Features: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY CD74HCT4316E ApplicationsThere are a lot of Texas Instruments CD74HCT4316E Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
