My CartGrounding Braid, Straps(2795)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | CD74HC4052NSR OverviewShipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.209, 5.30mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 16. The electronic part delivers high-quality output through its 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for 74HC4052 variants of the analog switch ic. As far as internal resistance is concerned, it has 130Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. When using dual power supplies, you should attach at least 1V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A 185MHz-bandwidth can be used for data transfer. It can conduct in a 4-bit manner. CD74HC4052NSR Features8 Channels Switch Circuit: SP4T Bandwidth: 185MHz 4-Bit CD74HC4052NSR ApplicationsThere are a lot of Texas Instruments CD74HC4052NSR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS12A4515DR OverviewShipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3.3V voltage supply. It is injected into the electrical part body with 8 pins. These analog multiplexers are built based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with TS12A4515. A 20Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2V. This multiplexer would work with 50nA current. An analogue multiplexer drains from a single voltage supply at 2.7V~12V. The analogue multiplexer may be damaged if voltage is greater than 50nA. A 1 input needs to be operated. It is possible to transfer data over a 475MHz-bandwidth. TS12A4515DR Features1 Channels Switch Circuit: SPST - NC 50nA Supply Current -3db Bandwidth: 520MHz Bandwidth: 475MHz TS12A4515DR ApplicationsThere are a lot of Texas Instruments TS12A4515DR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4053ADBR OverviewDue to its 16-SSOP (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. There are 3 circuits in this multiplexer. Try searching with 74LV4053 if you're looking for variants. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 20μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Operating the 6 inputs requires 6 inputs. There are various bandwidths available for data transfer. SN74LV4053ADBR Features2 Channels Switch Circuit: SPDT 20μA Supply Current Bandwidth: 50MHz SN74LV4053ADBR ApplicationsThere are a lot of Texas Instruments SN74LV4053ADBR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A2066DCURG4 OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, 8 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. The electrical component body receives 8 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Look for analog switch ic variants by searching with TS5A2066. In this multiplexer, the internal resistance is 10Ohm. For details about the functions of 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this multiplexer to operate, 100nA current would be sufficient. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electrical component supports 2 inputs. In 300MHz-bandwidths, data can be transferred. TS5A2066DCURG4 Features2 Channels Switch Circuit: SPST - NO 100nA Supply Current Bandwidth: 300MHz TS5A2066DCURG4 ApplicationsThere are a lot of Texas Instruments TS5A2066DCURG4 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV4051ATDWRQ1 OverviewThe electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~105°C TA. Totally, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Use 74LV4051 to search for variants of the digital switches. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 20μA current would be sufficient. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It is possible to operate 8 inputs. The data can be transferred over a wide range of bandwidths, called 35MHz bandwidths. From the Automotive, AEC-Q100 series. SN74LV4051ATDWRQ1 Features8 Channels 20μA Supply Current Bandwidth: 35MHz SN74LV4051ATDWRQ1 ApplicationsThere are a lot of Texas Instruments SN74LV4051ATDWRQ1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4051BQPWRG4Q1 OverviewThis electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. The total number of terminations is 16. A 8 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with CD4051. Analog switches have 240Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 20V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 5V as the lowest voltage for the electrical part. This multiplexer would work with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 10V. If you are using dual power supplies, you should attach at least 2.5V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electrical component supports 8 inputs. There are 20MHz bandwidths for data transfer. This is electronic component of the Automotive, AEC-Q100 series. CD4051BQPWRG4Q1 Features8 Channels 80nA Supply Current Bandwidth: 20MHz CD4051BQPWRG4Q1 ApplicationsThere are a lot of Texas Instruments CD4051BQPWRG4Q1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS12A4514DR OverviewDue to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. With a 3.3V voltage supply, the electrical component should be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SPST - NO switching circuits. Look for analog switch ic variants by searching with TS12A4514. Internally, this switch multiplexer has a resistance of 15Ohm. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. For this digital switch to work, 50nA current would suffice. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. If you put voltage higher than 50nA on the digital multiplexer, damage may occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There are 1 inputs to be operated. A 520MHz-bandwidth can be used for data transfer. TS12A4514DR Features1 Channels Switch Circuit: SPST - NO 50nA Supply Current Bandwidth: 520MHz TS12A4514DR ApplicationsThere are a lot of Texas Instruments TS12A4514DR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS12A4517DR OverviewDue to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 8 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. These analog multiplexers are built based on SPST - NC switching circuits. Use TS12A4517 to search for variants of the digital switches. There is 20Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. An effective Dual supply digital multiplexer. A low voltage of 1V should be applied to the electronic component. The switch device would be able to operate with 70μA current. The analogue multiplexer may be damaged if voltage is greater than 70μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 1 inputs. A 464MHz-bandwidth can be used for data transfer. Additional features include: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V. TS12A4517DR Features1 Channels Switch Circuit: SPST - NC 70μA Supply Current Bandwidth: 464MHz Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V TS12A4517DR ApplicationsThere are a lot of Texas Instruments TS12A4517DR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A623157DGSR OverviewShipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. There are 10 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. TS5A623157 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for 10 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. This digital switch can be operated with a current of 10nA. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 150nA, damage can occur. A 371MHz-bandwidth can be used for data transfer. The analog switch ics includes 4 outputs. TS5A623157DGSR Features2 Channels Switch Circuit: SPDT 10nA Supply Current Bandwidth: 371MHz TS5A623157DGSR ApplicationsThere are a lot of Texas Instruments TS5A623157DGSR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS3A4742DGKR OverviewThe electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. By its 2 channels, the electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPST - NC switching circuits. Search with TS3A4742 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 900mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~3.6V. When the digital multiplexer is charged above 750nA, damage can occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 2 inputs to be operated. A 125MHz-bandwidth can be used for data transfer. TS3A4742DGKR Features2 Channels Switch Circuit: SPST - NC Bandwidth: 125MHz TS3A4742DGKR ApplicationsThere are a lot of Texas Instruments TS3A4742DGKR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS3A44159PWRG4 OverviewShipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. A 1.8V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Try searching with TS3A44159 to find analog multiplexer variants. It has an internal resistance of 450mOhm. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 4.3V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. It would be sufficient to run this analogue multiplexer with 15nA current. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. Putting voltage greater than 400nA on the multiplexer may cause damage. Operating voltages of 3V are compatible with the electrical part. The electrical component supports 4 inputs. In 35MHz-bandwidths, data can be transferred. The analog switch ics has 8 outputs. TS3A44159PWRG4 Features4 Channels Switch Circuit: SPDT 15nA Supply Current Bandwidth: 35MHz TS3A44159PWRG4 ApplicationsThere are a lot of Texas Instruments TS3A44159PWRG4 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A23166YZTR OverviewDue to its 8-UFBGA, DSBGA packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. By its 2 channels, the electronic component provides high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 8 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with TS5A23166 to find analog multiplexer variants. Analog switches have 900mOhm internal resistance. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. For this multiplexer to operate, 10nA current would be sufficient. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A voltage higher than 100nA may cause damage to the switch multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This switch operates within the bandwidth of 150MHz. TS5A23166YZTR Features2 Channels Switch Circuit: SPST - NO 10nA Supply Current Bandwidth: 150MHz TS5A23166YZTR ApplicationsThere are a lot of Texas Instruments TS5A23166YZTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | NX3L2267GU,115 OverviewThis electronic part is conveniently packaged in 10-XFQFN, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 10 terminations. An electrical component of this type can be found in the 10 series. Based on SPDT switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with NX3L2267. In this analog multiplexer, the value is Multiplexer or Switches. This analog switch requires a voltage of 1.4V~4.3V to drain from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output. NX3L2267GU,115 FeaturesSwitch Circuit: SPDT -3db Bandwidth: 60MHz NX3L2267GU,115 ApplicationsThere are a lot of NXP USA Inc. NX3L2267GU,115 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | STG5683QTR OverviewThe electrical component comes in 16-UFQFN packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. These analog multiplexers are built based on SPDT switching circuits. Try searching with STG5683 if you're looking for variants. There is 550mOhm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 4.5V in normal situations. A cost-effective Single supply type analogue multiplexer. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 50nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~4.5V. The analogue multiplexer may be damaged if voltage is greater than 50nA. Among the inputs that can be operated are the 2 inputs. The analog switch ics includes 4 outputs. STG5683QTR Features1 Channels Switch Circuit: SPDT 50nA Supply Current -3db Bandwidth: 33MHz STG5683QTR ApplicationsThere are a lot of STMicroelectronics STG5683QTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX509IPWR OverviewThe electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. As a result of its 2 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this switch device. Try searching for MUX509 variants of the analog switch ic. Analog switches have 250Ohm internal resistance. Datasheets for functions of 16 pins are available. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to use COMMON OUTPUT outputs on this digital multiplexer. 500MHz bandwidths enable data to be transferred. It has a Drain to Source resistance of 250Ohm ohms. MUX509IPWR Features2 Channels Switch Circuit: SP4T Bandwidth: 500MHz Drain-to-Source resistance: 250Ohm MUX509IPWR ApplicationsThere are a lot of Texas Instruments MUX509IPWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX1136DQAR OverviewShipping overseas is convenient due to the electrical component's packing in 10-UFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~125°C TA. A total of 10 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.2V volts, the electrical part can be powered up and run. These analog multiplexers are built based on SPDT switching circuits. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with TMUX1136. A voltage of 1.08V~5.5V is required for this switch device, which drains from a single voltage source. The data can be transferred over a wide range of bandwidths, called 250MHz bandwidths. TMUX1136DQAR Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 220MHz Bandwidth: 250MHz TMUX1136DQAR ApplicationsThere are a lot of Texas Instruments TMUX1136DQAR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | M74HC4851RM13TR OverviewShipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. There are 1 circuits in this switch device. M74HC48 can be used to search for analog multiplexer variants. This digital multiplexer has 650Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. An effective Single supply digital multiplexer. A low voltage of 2V should be applied to the electronic component. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. The electrical component supports 8 inputs. M74HC4851RM13TR Features8 Channels M74HC4851RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC4851RM13TR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX6122DGSR OverviewThis electronic part is conveniently packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~125°C TA. A total of 10 terminations have been recorded. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. On the other hand, analog switches can be constructed using SPST switching circuits. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with TMUX6122 if you are looking for variants. It is possible to transfer data over a 630MHz-bandwidth. Providing power to the analogue multiplexer requires a voltage of 5VV. TMUX6122DGSR Features1 Channels Switch Circuit: SPST -3db Bandwidth: 630MHz Bandwidth: 630MHz TMUX6122DGSR ApplicationsThere are a lot of Texas Instruments TMUX6122DGSR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX1109PWR OverviewThe electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Cut Tape (CT). There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. This multiplexer is composed of 2 circuits. Search with TMUX1109 if you are looking for analog multiplexer variants. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. In 155MHz-bandwidths, data can be transferred. TMUX1109PWR Features1 Channels -3db Bandwidth: 135MHz Bandwidth: 155MHz TMUX1109PWR ApplicationsThere are a lot of Texas Instruments TMUX1109PWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX1109RSVR OverviewPacked in 16-UFQFN, the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Increasing operating temperature to around -40°C~125°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. There are 2 circuits in this multiplexer. Using the TMUX1109 search parameter, you can discover variants of the switch. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. 155MHz bandwidths enable data to be transferred. TMUX1109RSVR Features1 Channels -3db Bandwidth: 135MHz Bandwidth: 155MHz TMUX1109RSVR ApplicationsThere are a lot of Texas Instruments TMUX1109RSVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX1134PWR OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 20-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. Total terminations are 20. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. Unlike digital switches, these are based on SPDT switching circuits. The multiplexer consists of 4 circuits. Use TMUX1134 to search for variants of the digital switches. An analogue multiplexer drains from a single voltage supply at 1.08V~5.5V. The data can be transferred over a wide range of bandwidths, called 220MHz bandwidths. TMUX1134PWR Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 220MHz Bandwidth: 220MHz TMUX1134PWR ApplicationsThere are a lot of Texas Instruments TMUX1134PWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX507IPWR OverviewShipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 28. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with MUX507 if you are looking for variants. You can find the functions of the 28 pins in the datasheets. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A total of COMMON OUTPUT outputs are available on this analog switch ic. It is possible to transfer data over a 500MHz-bandwidth. MUX507IPWR Features2 Channels Bandwidth: 500MHz MUX507IPWR ApplicationsThere are a lot of Texas Instruments MUX507IPWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX506IDWR OverviewShipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 16:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. In total, 28 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This multiplexer is composed of 1 circuits. MUX506 can be used to search for analog multiplexer variants. For details about the functions of 28 pins, please refer to the datasheets. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. COMMON OUTPUT outputs are utilized by this digital multiplexer. This switch operates within the bandwidth of 500MHz. MUX506IDWR Features1 Channels Bandwidth: 500MHz MUX506IDWR ApplicationsThere are a lot of Texas Instruments MUX506IDWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX6136PWR OverviewPresented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Totally, there are 16 terminations. A 1 channel electronic part produces high-quality output. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with TMUX6136 if you are looking for variants. It is possible to transfer data over a 670MHz-bandwidth. TMUX6136PWR Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 670MHz Bandwidth: 670MHz TMUX6136PWR ApplicationsThere are a lot of Texas Instruments TMUX6136PWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX6104PWR OverviewThe electrical component comes in 14-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C extended. In total, there have been 14 terminations. A high-quality output is provided by the electrical component's 1 channels. A total of 1 circuits make up this switch device. Try searching with TMUX6104 to find analog multiplexer variants. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A 400MHz-bandwidth can be used for data transfer. TMUX6104PWR Features1 Channels -3db Bandwidth: 500MHz Bandwidth: 400MHz TMUX6104PWR ApplicationsThere are a lot of Texas Instruments TMUX6104PWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX6111PWR OverviewThe electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. SPST switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 4. Try searching for the analog switch ic with TMUX6111 if you are looking for variants. In 380MHz-bandwidths, data can be transferred. TMUX6111PWR Features1 Channels Switch Circuit: SPST -3db Bandwidth: 800MHz Bandwidth: 380MHz TMUX6111PWR ApplicationsThere are a lot of Texas Instruments TMUX6111PWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TMUX6112RTER OverviewPacked in 16-WFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. The analog switch ics are built using SPST switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching for TMUX6112 variants of the analog switch ic. It is possible to transfer data over a 800MHz-bandwidth. TMUX6112RTER Features1 Channels Switch Circuit: SPST -3db Bandwidth: 800MHz Bandwidth: 800MHz TMUX6112RTER ApplicationsThere are a lot of Texas Instruments TMUX6112RTER Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5A22362DRCT-NM OverviewShipping overseas is convenient due to the electrical component's packing in 10-VFDFN Exposed Pad. To ensure high reliability, a new packaging method Cut Tape (CT) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 10 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. Electronic part bodies are injected with 10 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for TS5A22362 variants of the analog switch ic. It has an internal resistance of 940mOhm. For details about the functions of 10 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. In order to operate this switch device, it would need a current of 200nA. An analogue multiplexer drains from a single voltage supply at 2.3V~5.5V. If put voltage greater than 1.3μA on the device, damage may be caused to the analogue multiplexer. There are 2 inputs to be operated. There are various bandwidths available for data transfer. This digital multiplexer has 4 outputs. TS5A22362DRCT-NM Features1 Channels Switch Circuit: SPDT 200nA Supply Current Bandwidth: 18.3MHz TS5A22362DRCT-NM ApplicationsThere are a lot of Texas Instruments TS5A22362DRCT-NM Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36D04IPWR OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operational temperature extended around -40°C~125°C TA. Totally, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with 36D04 if you are looking for variants. A 170Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. As far as the outputs go, this switch multiplexer utilizes COMMON OUTPUT of them. It is possible to transfer data over a 500MHz-bandwidth. MUX36D04IPWR Features2 Channels Bandwidth: 500MHz MUX36D04IPWR ApplicationsThere are a lot of Texas Instruments MUX36D04IPWR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MUX36S08IRUMR OverviewThis electronic part is conveniently packaged in 16-WQFN Exposed Pad, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C degrees Celsius. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 1 circuits in this switch device. Try searching with 36S08 to find analog multiplexer variants. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. It is possible to transfer data over a 500MHz-bandwidth. MUX36S08IRUMR Features8 Channels Bandwidth: 500MHz MUX36S08IRUMR ApplicationsThere are a lot of Texas Instruments MUX36S08IRUMR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
