My CartGrounding Braid, Straps(2795)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
 |
Belden Inc. | Ground Braid X |
8975
In-stock
|
Get Quote | ||
|
Belden Inc. | Ground Braid X |
4486
In-stock
|
Get Quote | ||
|
Belden Inc. | Ground Braid X |
7991
In-stock
|
Get Quote | ||
|
Belden Inc. | Ground Braid X |
7833
In-stock
|
Get Quote | ||
|
Daburn Electronics | Flat Ground Braid 0.500" (12.70mm, 1/2") - Width X 50.0' (15.24m) 10 AWG |
9230
In-stock
|
Get Quote | ||
| Alpha Wire | Tubular Ground Braid 0.171" (4.34mm, 11/64") - Inner Dia X 100.0' (30.48m) 36 AWG |
21
In-stock
|
Get Quote | |||
| AC Tasarim | Tubular Ground Braid 0.118" (3.00mm) - Inner Dia X Enter Number of Meters in Order Quantity 38 AWG |
6063
In-stock
|
Get Quote | |||
|
Belden Inc. | Tubular Ground Braid X 250.0' (76.20m) 30 AWG |
6500
In-stock
|
Get Quote | ||
| Belden Inc. | Tubular Ground Braid 0.210" (5.33mm, 21/100") - Inner Dia X 50.0' (15.24m) 34 AWG |
7
In-stock
|
Get Quote | |||
| Belden Inc. | Tubular Ground Braid 0.210" (5.33mm, 21/100") - Inner Dia X 250.0' (76.20m) 34 AWG |
3
In-stock
|
Get Quote | |||
| Techflex | Tubular Ground Braid 0.250" (6.35mm, 1/4") - Outer Dia X 100.0' (30.48m) 36 AWG |
9
In-stock
|
Get Quote | |||
| Techflex | Tubular Ground Braid 0.500" (12.70mm, 1/2") - Outer Dia X 100.0' (30.48m) 36 AWG |
3
In-stock
|
Get Quote | |||
| Techflex | Tubular Ground Braid 1.500" (38.10mm, 1 1/2") - Outer Dia X 25.0' (7.62m) 30 AWG |
1
In-stock
|
Get Quote | |||
| nVent | Flat, Busbar Ground Braid 0.512" (13.00mm) - Width X 0.5' (0.15m) |
171
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4051QPWRQ1 OverviewThe electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with 74HC4051. The internal resistance of this digital multiplexer is 130Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 16μA current would be sufficient. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. The voltage should be at least 1V if you are using dual power supplies. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. There are 8 inputs to be operated. 180MHz-bandwidths can be used to transfer data between multiplexers. From the Automotive, AEC-Q100 series. CD74HC4051QPWRQ1 Features8 Channels 16μA Supply Current Bandwidth: 180MHz CD74HC4051QPWRQ1 ApplicationsThere are a lot of Texas Instruments CD74HC4051QPWRQ1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC4066D OverviewThe electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 14 terminations have been recorded. A 4 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 14 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with 74HC4066. As far as internal resistance is concerned, it has 85Ohm. You can find the functions of the 14 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 2μA current would suffice. An analogue multiplexer drains from a single voltage supply at 2V~6V. Put voltage above 2μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating voltages range from 5V. There are 30MHz bandwidths for data transfer. It has a Drain to Source resistance of 150Ohm ohms. SN74HC4066D Features4 Channels Switch Circuit: SPST - NO 2μA Supply Current Bandwidth: 30MHz Drain-to-Source resistance: 150Ohm SN74HC4066D ApplicationsThere are a lot of Texas Instruments SN74HC4066D Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4052PW OverviewAs the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. An electrical component like this is included in the 16 series. A SP4T switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. Use 74HC4052 to search for variants of the digital switches. Analog switches have 130Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 2V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 5VWith dual power supplies, you should attach at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to transfer data over a 185MHz-bandwidth. There is 80Ohm resistance between the Drain and Source on this part. It is able to conduct in a 4-bit way. CD74HC4052PW Features8 Channels Switch Circuit: SP4T Bandwidth: 185MHz Drain-to-Source resistance: 80Ohm 4-Bit CD74HC4052PW ApplicationsThere are a lot of Texas Instruments CD74HC4052PW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TS5N412PW OverviewThe electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 4 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Based on SPDT switching circuits, these analog multiplexers work. It consists of 4 circuits. Using the TS5N412 search parameter, you can discover variants of the switch. A 12.5Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. Users should never supply a voltage higher than 5.25V to a switch device. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 4.75V. This digital switch can be operated with a current of 10mA. This analogue multiplexer requires a voltage of 4.75V~5.25V when it drains from a single voltage supply. Operating voltages range from 5V. Among the inputs that can be operated are the 8 inputs. 25MHz bandwidths enable data to be transferred. Multiplexer ics with 4 outputs are available. TS5N412PW Features4 Channels Switch Circuit: SPDT 10mA Supply Current -3db Bandwidth: 25MHz Min Bandwidth: 25MHz TS5N412PW ApplicationsThere are a lot of Texas Instruments TS5N412PW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | NX3DV3899GU,115 OverviewPacked in 16-XFQFN, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. 2:2 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. There are 16 terminations totally. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using DPDT switching circuits. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with NX3DV3899. There is Multiplexer or Switches analog multiplexer like this in the world. Using only a single voltage supply, this analog switch requires 1.4V~4.3V voltage. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. NX3DV3899GU,115 FeaturesSwitch Circuit: DPDT -3db Bandwidth: 200MHz NX3DV3899GU,115 ApplicationsThere are a lot of NXP USA Inc. NX3DV3899GU,115 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT4051MT OverviewAs the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. With a 4.5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. A 1 circuit is present in this switch device. Try searching for the analog switch ic with 74HCT4051 if you are looking for variants. A 180Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The electronic component can function from 5V. Operating the 8 inputs requires 8 inputs. 180MHz bandwidths enable data to be transferred. CD74HCT4051MT Features1 Channels Bandwidth: 180MHz CD74HCT4051MT ApplicationsThere are a lot of Texas Instruments CD74HCT4051MT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
6173
In-stock
|
Get Quote | ||||
| Ultralife | SN74LV4051APW OverviewAs the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. A 8 channel electronic part produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. Using the 74LV4051 search parameter, you can discover variants of the switch. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. The switch device would be able to operate with 20μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 35MHz bandwidths. It has a Drain to Source resistance of 100Ohm ohms. SN74LV4051APW Features8 Channels 20μA Supply Current Bandwidth: 35MHz Drain-to-Source resistance: 100Ohm SN74LV4051APW ApplicationsThere are a lot of Texas Instruments SN74LV4051APW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MPC507AU/1K OverviewAs the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. 28 terminations have been made so far. The electronic part delivers high-quality output through its 2 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 28 series. It consists of 2 circuits. Look for analog switch ic variants by searching with MPC507. There is 1.5kOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 28 pins functions. The digital multiplexer has a low cost Dual supply. In order to operate this switch device, it would need a current of 700μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VThe voltage should be at least 5V if you are using dual power supplies. A total of COMMON OUTPUT outputs are available on this analog switch ic. A voltage of 18V can be used to operate the electronic component. A 16 input needs to be operated. MPC507AU/1K Features2 Channels 700μA Supply Current MPC507AU/1K ApplicationsThere are a lot of Texas Instruments MPC507AU/1K Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| APS | HV2621/R4X OverviewDue to its 64-VFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around 0°C~70°C TA. In total, there are 64 terminations. The electronic part provides high-quality output because it has 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. On the other hand, analog switches can be constructed using SPST switching circuits. There are 1 circuits in this multiplexer. A voltage of 3V~5.5V is required to drain this analog switch from a single voltage supply. HV2621/R4X Features1 Channels Switch Circuit: SPST HV2621/R4X ApplicationsThere are a lot of Microchip Technology HV2621/R4X Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | NX3L1T3157GM,115 OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 6-XFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 6. The electronic part provides high-quality output because it has 1 channels. With a 1.65V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 6 pins. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 1 make up this analogue multiplexer. Try searching for NX3L1T3157G variants of the analog switch ic. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. NX3L1T3157GM,115 Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 60MHz NX3L1T3157GM,115 ApplicationsThere are a lot of NXP USA Inc. NX3L1T3157GM,115 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
240
In-stock
|
Get Quote | ||||
| Ultralife | CD74HC4052PWRG4 OverviewShipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 4:1. Temperatures around -55°C~125°C TA are extended for operation. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. Unlike digital switches, these are based on SP4T switching circuits. 2 circuits are used in this analogue multiplexer. Use 74HC4052 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 130Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. If you are using dual power supplies, you should attach at least 1V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. There are 185MHz bandwidths for data transfer. 4-bit conductivity is possible. CD74HC4052PWRG4 Features8 Channels Switch Circuit: SP4T Bandwidth: 185MHz 4-Bit CD74HC4052PWRG4 ApplicationsThere are a lot of Texas Instruments CD74HC4052PWRG4 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MPC506AU/1K OverviewPresented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 16:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 28. A electrical component with 1 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. MPC506 can be used to search for analog multiplexer variants. It has an internal resistance of 1.5kOhm. You can find the functions of the 28 pins in the datasheets. The analog switch ic is of the Dual supply type and is cost-effective. The switch device would be able to operate with 700μA current. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 5V to your dual power supply. A voltage of 18V can be used to operate the electronic component. It is possible to operate 16 inputs. MPC506AU/1K Features1 Channels 700μA Supply Current MPC506AU/1K ApplicationsThere are a lot of Texas Instruments MPC506AU/1K Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | MPC508AU OverviewThe electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with MPC508 to find analog multiplexer variants. As far as internal resistance is concerned, it has 1.5kOhm. You can find the functions of the 16 pins in the datasheets. An effective Dual supply digital multiplexer. It would be sufficient to run this analogue multiplexer with 700μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. With dual power supplies, you should attach at least 5V. COMMON OUTPUT outputs are utilized by this digital multiplexer. The electronic component can function from 15V. MPC508AU Features8 Channels 700μA Supply Current MPC508AU ApplicationsThere are a lot of Texas Instruments MPC508AU Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | HCF4051YM013TR OverviewShipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. 1 circuits are used in this analogue multiplexer. Use HCF4051 to search for variants of the digital switches. As far as internal resistance is concerned, it has 280Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 20V. The lowest voltage fed to the electronic component should be 3V. Analogue multiplexers require a 3V~20V voltage to drain from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The Automotive, AEC-Q100 series includes it. HCF4051YM013TR Features8 Channels -3db Bandwidth: 60MHz HCF4051YM013TR ApplicationsThere are a lot of STMicroelectronics HCF4051YM013TR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
