815-SN74CB3T1G125DBVR

Manufacturer:

Texas Instruments

Product Number:

815-SN74CB3T1G125DBVR

Description:

SN74CB3T1G125DBVR Overview

For the purpose of saving board space, digital switch is included in the SC-74A, SOT-753.Tape & Reel (TR) represents its packaging.Surface Mount is the moun

Datasheet:

SN74CB3T1G125DBVR

Description:

SN74CB3T1G125DBVR Overview

For the purpose of saving board space, digital switch is included in the SC-74A, SOT-753.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CB series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 5 terminations.To find signal switch's related components, a base part number of 74CB3T1G125 may also be used.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 5 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.There are 5 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of CB3T/3VT.In this signal multiplexer, there are 1 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 20μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 8Ohm.There are 1 elements used for the mux switch configuration.

SN74CB3T1G125DBVR Features

Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single

SN74CB3T1G125DBVR Applications

There are a lot of Texas Instruments SN74CB3T1G125DBVR Signal Switches / Multiplexers / Decoders applications.

• Make full adder
• Audio transmission
• Medical industry
• Data-routing applications
• Metal detectors
• Microprocessor memory systems
• Enabling block of memory depending on address in memory chips
• HD surveillance system
• Communication system
• Idle motor