815-SN74CBT16244DGVR

Manufacturer:

Texas Instruments

Product Number:

815-SN74CBT16244DGVR

Description:

SN74CBT16244DGVR Overview

Due to the lack of space on the board, digital switch is provided in the 48-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to

Datasheet:

SN74CBT16244DGVR

Description:

SN74CBT16244DGVR Overview

Due to the lack of space on the board, digital switch is provided in the 48-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.There are 48 terminations included in its basic configuration.The base part number is 74CBT16244, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 48 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 16 bits that are provided.Keep Vsup at 4V to avoid unnecessary failures.In order for 5V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.A resistance of 7Ohm is used to operate it.For increased switches' flexibility, the output current of 64mA is provided.

SN74CBT16244DGVR Features

Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16244DGVR Applications

There are a lot of Texas Instruments SN74CBT16244DGVR Signal Switches / Multiplexers / Decoders applications.

• Image transmission
• Make full adder
• Combinational circuit
• Arithmetic Logic Units
• CPU memory location identification
• Enabling different rows of memory depending on address in memory chips
• Recording transmission
• Control unit of Central Processing unit (CPU)
• Home automation system
• Electronic circuits