Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
NXP Semiconductors | PCA8565AU/5BB/1,01 OverviewIn package Die, real time clocks can be found.As of Bulk, time clock is packaged in this way.A voltage of 1.8V~5.5V is supplied to this electrical RTC.This electrical real time clock is type Clock/Calendar.The way this real time clock (RTC) is mounted on the system board is Surface Mount.-40°C~125°C should be the operating temperature.When operating, electronic time clocks are possible to make sure that Alarm, Leap Year, Square Wave Output, Watchdog Timer remains constant in the process.A transmission line can have a 9 termination by terminating it with a RTC module whose characteristic impedance matches the line's.It is possible to see 2V voltage being supplied to this RTC real time clock.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.Real time clocks of the series Automotive, AEC-Q100 are of this type. PCA8565AU/5BB/1,01 FeaturesDie package 9 terminations Automotive, AEC-Q100 series PCA8565AU/5BB/1,01 ApplicationsThere are a lot of NXP USA Inc. PCA8565AU/5BB/1,01 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCF8564AU/5GB/1,01 OverviewIn package Die, real time clocks can be found.As a result, time clock is packaged in the same way as Bulk.1V~5.5V is the supply voltage of this electrical RTC.Electrical real time clock type Clock/Calendar.This real time clock (RTC) is mounted in the way of Surface Mount.Ideally, the operating temperature should be -40°C~85°C.Operating with Alarm, Leap Year, Square Wave Output, Watchdog Timer are possible.When a transmission line is terminated with 9 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.This RTC real time clock is supplied with 2V voltage.The RTCs are equipped with the necessary features due to its 9 pins.A component such as this is included in the contents of Timer or RTC.The frequency of real time clocks' output should not exceed 0.032MHz.In order for it to be powered, it requires a power supply of 2/5V.1 timers are used in this system. They output a signal after an input signal is received at a predetermined time. PCF8564AU/5GB/1,01 FeaturesDie package 9 terminations 9 pin count 2/5V power supplies PCF8564AU/5GB/1,01 ApplicationsThere are a lot of NXP USA Inc. PCF8564AU/5GB/1,01 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCF2123U/12HA/1,00 OverviewThere is a version of real time clocks in the package Die.The package is Bulk.A voltage of 1.6V~5.5V is supplied to this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.There should be -40°C~85°C operating temperature.Operating with Alarm, Leap Year, Square Wave Output, Watchdog Timer are possible.It is possible to terminate a transmission line with a RTC module that matches the characteristic impedance of the line, which is known as 12 termination.It should be noted that this RTC real time clock is being supplied with 2V voltage at the moment.As a member of the PCF2123 family, RTCs belongs to them.Timers or RTCs includes this component as part of its contents.0.032MHz should be the maximum output frequency.A power supply of 1.1/5.5V is used to power it.When an input signal is received, 1 timers are used to output a signal at a preset time. PCF2123U/12HA/1,00 FeaturesDie package 12 terminations 1.1/5.5V power supplies PCF2123U/12HA/1,00 ApplicationsThere are a lot of NXP USA Inc. PCF2123U/12HA/1,00 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCF8593P,112 OverviewIn package 8-DIP (0.300, 7.62mm), real time clocks can be found.There is a way to package time clock in the form of a Tube.Unless otherwise stated, this electrical RTC's supply voltage is 2.5V~6V.Electrical real time clock type Clock/Calendar.This part is mounted on the systemboard in the way indicated by Through Hole.Temperatures should be kept at -40°C~85°C at all times for safe operation.When operating, electronic time clocks would be possible to ensure that the value Alarm, NVSRAM are maintained.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.RTC real time clocks like this have a 5V supply voltage.8 pins are present on it.RTCs belongs to PCF8593 family.In Timer or RTC, you can find this component.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 8B.The output frequency should not exceed 0.032MHz.A power supply of 3/5V is used to power it. PCF8593P,112 Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 3/5V power supplies PCF8593P,112 ApplicationsThere are a lot of NXP USA Inc. PCF8593P,112 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DP8573AN OverviewThe package 24-DIP (0.300, 7.62mm) contains real time clocks.Tube is the packaging method.There is 4.5V~5.5V voltage supply for this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.It should be noted that the real time clock (RTC) is mounted in the way of Through Hole.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.When running a program, electronic time clocks may be possible to ensure that Alarm, Leap Year are maintained at all times.Transmission lines with 24 terminations have the characteristic impedance of their termination RTC modules.As it has 24 pins, it is equipped with the necessary features.As a member of the DP8573 family, RTCs belongs to them.A crucial thing to remember is that this electrical digital time clock has a supply voltage of 2.2V~5.1V.This part is included in Timer or RTC.The RTC times have a memory size of 32B that is available for storing data and programs.There is a mounting type of Through Hole for this RTC module.In order for it to be powered, it requires a power supply of 3/5V. DP8573AN Features24-DIP (0.300, 7.62mm) package 24 terminations 24 pin count 3/5V power supplies DP8573AN ApplicationsThere are a lot of Texas Instruments DP8573AN Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4285S-SB2 Overview24-SOIC (0.295, 7.50mm Width) is where you'll find real time clocks.Time clock is packaged in the way of Tube.4.5V~5.5V is the supply voltage of this electrical RTC.Electrical real time clock type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.In order to be safe, electronic time clocks are imperative that the temperature are kept at 0°C~70°C at all times.Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output can be ensured when operating.It is possible to terminate transmission lines with 24 terminations, which means that the RTC module terminating the line matches its characteristic impedance.The supply voltage of this RTC real time clock is 5V.With 24 pins, it is equipped with the necessary functions.BQ4285 are a family of objects that belongs to RTCs .Its supply voltage is 2.5V~4V.It falls under the subcategory of Timer or RTC.A memory of 114B is embedded in the RTC times, which can be used to store programs and data.There should be no frequency greater than 0.032MHz in real time clocks' output.There is a type of mounting for this RTC module: Surface Mount.The power supply is 5V.There are 24 pins on it.1 timer real time clocks send out a signal at a preset time based on input signals.RTC time is essential that the supply voltage remain at 5V for maximum efficiency. BQ4285S-SB2 Features24-SOIC (0.295, 7.50mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4285S-SB2 ApplicationsThere are a lot of Texas Instruments BQ4285S-SB2 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4847YMT OverviewIn package 28-DIP Module (0.61, 15.49mm), real time clocks is located.Time clock is packaged in the manner of Tube.This electrical RTC has a supply voltage of 4.5V~5.5V.Electrical real time clock type Clock/Calendar.There is an electronic component mounted in the way of Through Hole.There should be a temperature of 0°C~70°C during the operation.When a command are executed, electronic time clocks are possible to maintain Alarm, Daylight Savings, Leap Year, Supervisor, Watchdog Timer in order to maintain the current state.Transmission lines can be terminated with 28 terminations, which means that the RTC module that terminates the line matches its characteristic impedance.This RTC real time clock has a voltage of 5V.In terms of RTCs family, RTCs belongs to BQ4847.This electrical digital time clock's supply voltage is 2.3V~4V.The content of Timer or RTC includes this component.Mounting type Through Hole matches the RTC module.The power supply is 5V.It is equipped with 28 pins.High efficiency requires a 5V supply voltage. BQ4847YMT Features28-DIP Module (0.61, 15.49mm) package 28 terminations 5V power supplies Be maintained at 5V for high efficiency. BQ4847YMT ApplicationsThere are a lot of Texas Instruments BQ4847YMT Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ3285ESS OverviewThis can be found in the package 24-SSOP (0.154, 3.90mm Width).Tube is the way time clock is packaged.As far as the supply voltage for this electrical RTC is concerned, it is 4.5V~5.5V.An electrical real time clock of type Clock/Calendar can be said to be this one.There is an electronic component mounted in the way of Surface Mount.Ideally, the operating temperature should be 0°C~70°C.Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output can be ensured when operating.It is possible to terminate transmission lines with 24 terminations, which means that the RTC module terminating the line matches its characteristic impedance.The supply voltage of this RTC real time clock is 5V.24 pins are present on it.The family to which RTCs belongs are BQ3285.Its supply voltage is 2.5V~4V.Timer or RTC includes this component in its content.A memory of 242B is embedded in the RTC times, which can be used to store programs and data.Neither real time clocks' output frequency nor real time clocks' response frequency should exceed 0.032MHz.Mounting type is Surface Mount.For the purpose of powering the real time clock, the power supply is set to 5V.24 pins are attached to it.1 timer real time clocks send out a signal at a preset time based on input signals.RTC time is essential that the supply voltage remain at 5V for maximum efficiency. BQ3285ESS Features24-SSOP (0.154, 3.90mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285ESS ApplicationsThere are a lot of Texas Instruments BQ3285ESS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ3287EAMT OverviewThere is a version of real time clocks in the package 24-DIP Module (0.61, 15.49mm).A Tube package is used to package time clock.The supply voltage of this electrical RTC is 4.5V~5.5V.Clock/Calendar is the type of electrical real time clock that is being used.On the system board, this real time clock (RTC) is mounted in Through Hole.Electronic time clocks are recommended to operate at a temperature of 0°C~70°C.There is a way to make sure that Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output is maintained when operating if desired.In the case of 24 terminations, transmission lines have the characteristic impedance of the terminating RTC module.This RTC real time clock's supply voltage is 5V.In the family BQ3287, RTCs are a member.There are such RTCs in Timer or RTC subcategory.A memory of 242B is embedded into the RTC times for storing programs and data.The output frequency should not exceed 0.032MHz.It is mounted in the way of Through Hole.A power supply of 5V is used to power it.With 24 pins, it is equipped.1 timer real time clocks send out a signal at a preset time based on input signals.Maintaining the supply voltage at 5V is the key to high efficiency. BQ3287EAMT Features24-DIP Module (0.61, 15.49mm) package 24 terminations 5V power supplies Be maintained at 5V for high efficiency. BQ3287EAMT ApplicationsThere are a lot of Texas Instruments BQ3287EAMT Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4852YMC-85 OverviewThe package 36-DIP Module (0.610, 15.49mm) contains real time clocks.Tray is the way in which time clock is packaged.There is 4.5V~5.5V supply voltage for this electrical RTC.The type of this electrical real time clock is Clock/Calendar.This real time clock (RTC) is mounted in the way of Through Hole.The temperature should always be kept at 0°C~70°C to ensure safe operation.When operating, Alarm, Supervisor, Watchdog Timer can be ensured.It is possible to terminate transmission lines with 36 terminations, which means that the RTC module terminating the line matches its characteristic impedance.There is 5V voltage supplied to this RTC real time clock.Thare RTCs em are part of the family BQ4852.In Timer or RTC, this part is included.The RTC times embed a memory of 3.9MB available for storing programs and data.0.032MHz should be the maximum output frequency.Mounting type for the RTC module is Through Hole.For the purpose of powering the real time clock, the power supply is set to 5V.36 pins are attached to it.The supply voltage should be maintained at 5V for high efficiency. BQ4852YMC-85 Features36-DIP Module (0.610, 15.49mm) package 36 terminations 5V power supplies Be maintained at 5V for high efficiency. BQ4852YMC-85 ApplicationsThere are a lot of Texas Instruments BQ4852YMC-85 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ3285LDSS OverviewThis can be found in the package 24-SSOP (0.154, 3.90mm Width).The package is Tube.The supply voltage of this electrical RTC is 2.7V~5.5V.In this case, we are dealing with an electrical real time clock that has a type of Clock/Calendar.This real time clock (RTC) is mounted in the way of Surface Mount.The temperature should always be kept at 0°C~70°C to ensure safe operation.When a command are executed, electronic time clocks are possible to maintain Alarm, Daylight Savings, NVSRAM in order to maintain the current state.24 terminations are available for transmission lines, implying that the RTC module terminating the line matches its characteristic impedance.In this RTC real time clock, there is a voltage of 3V supplied to it.With its 24 pins, it has the necessary functions.In terms of RTCs family, RTCs belongs to BQ3285.This electrical digital time clock is powered by a voltage that is 2.4V~4V at the time of installation.RTCs in the Timer or RTC subcategory are available.The RTC times embed a memory of 242B available for storing programs and data.The output frequency should not exceed 0.032MHz.The RTC module is mounted with mounting type Surface Mount.As a power supply for the real time clock, a value of 3V is used.It is equipped with 24 pins.The supply voltage should be maintained at 3V for high efficiency. BQ3285LDSS Features24-SSOP (0.154, 3.90mm Width) package 24 terminations 24 pin count 3V power supplies Be maintained at 3V for high efficiency. BQ3285LDSS ApplicationsThere are a lot of Texas Instruments BQ3285LDSS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4850YMA-85 OverviewThere is a package called 32-DIP Module (0.61, 15.49mm) which contains real time clocks, and you can find real time clocks there.Packaged as Tray.As far as the supply voltage for this electrical RTC is concerned, it is 4.5V~5.5V.It can be said that this electrical real time clock belongs to the Clock/Calendar type.This part is mounted on the systemboard in the way indicated by Through Hole.Electronic time clocks should be 0°C~70°C degrees Celsius during operation.When a command are executed, electronic time clocks are possible to maintain Alarm in order to maintain the current state.There are 32 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.5V is the supply voltage of this RTC real time clock.Due to its 32 pins, it has the necessary features.As far as the family are concerned, RTCs are part of BQ4850.Timer or RTC includes this part.In these RTC times, there is a memory of 3.9MB where data and programs can be stored.There is a type of mounting for this RTC module: Through Hole.There are 5V power supplies attached to it.There are 32 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. In order to achieve high efficiency, the supply voltage should be kept at 5V. BQ4850YMA-85 Features32-DIP Module (0.61, 15.49mm) package 32 terminations 32 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4850YMA-85 ApplicationsThere are a lot of Texas Instruments BQ4850YMA-85 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4822YMA-70 OverviewThere is an embedded version of real time clocks in the package 28-DIP Module (0.61, 15.49mm).A Tray package is used to package time clock.Its supply voltage is 4.5V~5.5V.Electrical real time clocks of type Clock/Calendar are involved.A part of this electronic RTC module is mounted in the way of Through Hole.Temperature should be set at 0°C~70°C.If Alarm, Leap Year, Supervisor, Watchdog Timer is ensured during operation, then there is no problem.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.In this case, the voltage supplied to the electronic component is 5V.There are 28 pins on it.The family RTCs belongs to are BQ4822.It is included as part of Timer or RTC.In the RTC times you will find a memory of 7.8kB which is available for your programs and data storage.A frequency of 0.032MHz should not be exceeded by real time clocks' output frequency.The mounting type of the RTC module is Through Hole.For powering the real time clock, a power supply with a voltage of 5V is used.A total of 28 pins are attached to this real time clock.RTC time is important to maintain the supply voltage at 5V in order to maintain high efficiency. BQ4822YMA-70 Features28-DIP Module (0.61, 15.49mm) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4822YMA-70 ApplicationsThere are a lot of Texas Instruments BQ4822YMA-70 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ4845YS-A4 Overview28-SOIC (0.295, 7.50mm Width) is where you'll find real time clocks.As a result, time clock is packaged in the same way as Tube.There is 4.5V~5.5V voltage supply for this electrical RTC.Clock/Calendar is the type of this electrical real time clock.It should be noted that the real time clock (RTC) is mounted in the way of Surface Mount.Ideally, the operating temperature should be 0°C~70°C.When a command are executed, electronic time clocks are possible to maintain Alarm, Daylight Savings, Leap Year, Supervisor, Watchdog Timer in order to maintain the current state.In the case of 28 terminations, transmission lines have the characteristic impedance of the terminating RTC module.This RTC real time clock has a voltage supply of 5V which is provided to it.There are 28 pins on it.RTCs are a member of the family BQ4845.Keeping in mind that the supply voltage of this electrical digital time clock is 2.3V~4V is important.Timer or RTC is the subcategory in which the RTCs belongs.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.Mounting type Surface Mount matches the RTC module.There are 5V power supplies attached to it.There are 28 pins on it.Upon receiving an input signal, 1 timers output a signal at a preset time.Maintaining the supply voltage at 5V is the key to high efficiency. BQ4845YS-A4 Features28-SOIC (0.295, 7.50mm Width) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4845YS-A4 ApplicationsThere are a lot of Texas Instruments BQ4845YS-A4 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ32000DR OverviewA package named 8-SOIC (0.154, 3.90mm Width) contains real time clocks.A Tape & Reel (TR) package is used to package time clock.Its supply voltage is 3V~3.6V.This electrical real time clock has the type Clock/Calendar.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.Electronic time clocks are recommended to operate at a temperature of -40°C~85°C.Electronic time clocks are possible to make sure that Leap Year, Square Wave Output, Trickle-Charger are maintained when operating.Transmission lines with 8 terminations have the characteristic impedance of their termination RTC modules.This electronic component receives a voltage of 3.3V.There are 8 pins on it.RTCs belongs to BQ32000 family.A voltage of 1.4V~3.6V is supplied to this electrical digital time clock.RTCs in the Timer or RTC subcategory are available.There should not be a frequency higher than 0.032MHz in the output.Mounting type is Surface Mount.It is equipped with 8 pins.Optimal efficiency can be achieved by maintaining the supply voltage at 3.3V. BQ32000DR Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count Be maintained at 3.3V for high efficiency. BQ32000DR ApplicationsThere are a lot of Texas Instruments BQ32000DR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP79411-I/MS OverviewThe package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains real time clocks.Tube is the way time clock is packaged.It requires a voltage of 1.8V~5.5V to be supplied.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.Surface Mount is the way this real time clock (RTC) is mounted.Keeping the temperature at -40°C~85°C is essential to maintaining a safe working environment.When operating, electronic time clocks are possible to make sure that Alarm, Leap Year, Square Wave Output, SRAM, Unique ID remains constant in the process.It is possible to terminate a transmission line with a RTC module that matches the characteristic impedance of the line, which is known as 8 termination.The supply voltage of this RTC real time clock is 5V.8 pins are attached to it.As a member of the MCP79411 family, RTCs belongs to them.The supply voltage of this electrical digital time clock is 1.3V~5.5V.It falls under the subcategory of Timers or RTCs.The RTC times embed a memory of 64B 1Kb available for storing programs and data.There should not be a difference between real time clocks' output frequency and 0.4MHz.The mounting type of the RTC module is Surface Mount.The power supply is 2/5V.8 pins are present on it. MCP79411-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79411-I/MS ApplicationsThere are a lot of Microchip Technology MCP79411-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M48T35Y-70PC1 Overview28-DIP Module (0.600, 15.24mm) contains real time clocks.As of Tube, time clock is packaged in this way.There is 4.5V~5.5V supply voltage for this electrical RTC.There is a type Clock/Calendar for this electrical real time clock.This part is mounted on the systemboard in the way indicated by Through Hole.Keeping the temperature at 0°C~70°C is essential to maintaining a safe working environment.When running a program, electronic time clocks may be possible to ensure that Leap Year are maintained at all times.A transmission line can have a 28 termination by terminating it with a RTC module whose characteristic impedance matches the line's.Its supply voltage is 5V.The reason for this is that, due to the fact that it has 28 pins, it has the necessary features.As far as the family are concerned, RTCs are part of M48T35.In Timer or RTC, this part is included.The RTC times have a memory size of 32kB that is available for storing data and programs.The RTC module is mounted with mounting type Through Hole.A total of 5V power supplies are required to operate it.A total of 28 pins are equipped with the real time clock.RTC time is important to maintain the supply voltage at 5V in order to maintain high efficiency.Real-time clocks belonging to the Timekeeper? series are this type.There is a frequency of 70GHz that can be achieved. M48T35Y-70PC1 Features28-DIP Module (0.600, 15.24mm) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T35Y-70PC1 ApplicationsThere are a lot of STMicroelectronics M48T35Y-70PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T81SM6F OverviewThere is a package 8-SOIC (0.154, 3.90mm Width) that contains real time clocks.There is a packaging method that is similar to Tape & Reel (TR).This electrical RTC has a supply voltage of 2.7V~5.5V.An electrical real time clock of this type is called a Clock/Calendar.There is an real time clock (RTC) mounted in the way of Surface Mount.Ideally, the operating temperature should be set to -40°C~85°C.During the course of operation, Alarm, Leap Year, Square Wave Output, Watchdog Timer can be ensured.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.In the case of this RTC real time clock, there is 5V voltage supplied to it.A total of 8 pins are equipped with the RTCs.RTCs are a member of the family M41T81.Note that the supply voltage is 2V~3.5V for this electrical digital time clock.It falls under the subcategory of Timer or RTC.Programs and data can be stored in the 20B memory embedded in the RTC times.This RTC module is mounted using type Surface Mount.It operates from 3/5V power supplies.It is equipped with 8 pins.When an input signal is received, 1 timers are used to output a signal at a preset time.In this case, the frequency can be achieved at 32.768kHz.The outputs are set to 1. M41T81SM6F Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3/5V power supplies 1 outputs M41T81SM6F ApplicationsThere are a lot of STMicroelectronics M41T81SM6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T65Q6F Overview
M41T65Q6F Features
M41T65Q6F Applications
|
999
In-stock
|
Get Quote | |||
APS | MCP79510-I/MS OverviewThere is a package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) that contains real time clocks.Tube is the package format.To supply this electrical RTC, a voltage of 1.8V~3.6V is required.Clock/Calendar is the type of this electrical real time clock.There is an real time clock (RTC) mounted in the way of Surface Mount.Ideally, the operating temperature should be -40°C~85°C.If Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID is ensured during operation, then there is no problem.A transmission line with 10 terminations possesses the characteristic impedance of the RTC module terminating it.3V is the supply voltage of this RTC real time clock.MCP79510 are a family of objects that belongs to RTCs .The supply voltage of this electrical digital time clock is 1.3V~3.6V.5MHz should be the maximum output frequency.It is equipped with 10 pins. MCP79510-I/MS Features10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 terminations MCP79510-I/MS ApplicationsThere are a lot of Microchip Technology MCP79510-I/MS Real Time Clocks applications.
|
1251
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T11M6F DescriptionThe M41T11M6F is a low-power serial real-time clock (RTC) with 56 bytes of NVRAM. A built-in 32.768 kHz oscillator (external crystal controlled) and the first 8 bytes of the RAM are used for the clock/calendar function and are configured in binary-coded decimal (BCD) format. Addresses and data are transferred serially via a two-line bidirectional bus. The built-in address register is incremented automatically after each writes or reads a data byte. M41T11M6F FeaturesCounters for seconds, minutes, hours, days, dates, months, years, and century 32 KHz crystal oscillator integrating load capacitance (12.5 pF) providing exceptional oscillator stability and high crystal series resistance operation Serial interface supports I2C bus (100 kHz protocol) Ultra-low battery supply current of 0.8 µA (typ. at 3 V) 2.0 to 5.5 V clock operating voltage Automatic switchover and deselect circuitry 56 bytes of general-purpose RAM Software clock calibration to compensate for crystal deviation due to temperature Automatic leap-year compensation Operating temperature of –40 to 85°C Packaging includes a 28-lead SOIC and SNAPHAT® top (to be ordered separately; 3.3 V to 5.0 V supply voltage only) M41T11M6F ApplicationsAutomotive Advanced driver assistance systems (ADAS) Industrial Motor drives Enterprise systems Enterprise projectors |
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T56M6F OverviewThere is a package 8-SOIC (0.154, 3.90mm Width) that contains real time clocks.A Tape & Reel (TR) package is used to package time clock.It is important to keep in mind that the supply voltage of this electrical RTC is 4.5V~5.5V.An electrical real time clock of type Clock/Calendar can be said to be this one.This real time clock (RTC) is mounted in the way of Surface Mount.A safe operation requires a temperature of -40°C~85°C at all times.During operation, Leap Year, NVSRAM can be guaranteed.With 8 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.Obviously, a voltage of 5V is being supplied to this electronic component.As it has 8 pins, it is equipped with the necessary features.M41T56 are RTC s family.This electrical digital time clock has a supply voltage of 2.5V~3.5V.There is a component of this type in Timer or RTC.Neither real time clocks' output frequency nor real time clocks' response frequency should exceed 0.032MHz.It appears that the RTC module's mounting type is Surface Mount.As a power supply for the real time clock, a value of 5V is used.A total of 8 pins are attached to this real time clock.Maintaining the supply voltage at 5V is the key to high efficiency. M41T56M6F Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 5V power supplies Be maintained at 5V for high efficiency. M41T56M6F ApplicationsThere are a lot of STMicroelectronics M41T56M6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T11MH6F Overview28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets is where you'll find real time clocks.There is a way to package time clock in the form of a Tape & Reel (TR).This electrical RTC receives its power from the 2V~5.5V supply voltage.The type of this electrical real time clock is Clock/Calendar.There is an electronic component mounted in the way of Surface Mount.Electronic time clocks are recommended to operate at a temperature of -40°C~85°C.In order to ensure Leap Year, NVSRAM when operating, a certain value has to be set.The 28 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.It has a total of 28 pins on it.The M41T11 family contains RTCs .It is important to keep in mind that the supply voltage of this electrical digital time clock is 2.5V~3.5V.Timer or RTC includes this component as part of its contents.A frequency of 0.032MHz should not be exceeded by real time clocks' output.There is a type of mounting for this RTC module: Surface Mount.It operates from 2.5/5V power supplies.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. M41T11MH6F Features28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets package 28 terminations 28 pin count 2.5/5V power supplies M41T11MH6F ApplicationsThere are a lot of STMicroelectronics M41T11MH6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41ST85WMX6TR OverviewThere is a package 28-SOIC (0.295, 7.50mm Width) that contains real time clocks.Time clock is packaged in the manner of Tape & Reel (TR).It requires a voltage of 2.7V~3.6V to be supplied.The type of this electrical real time clock is Clock/Calendar.It should be noted that the real time clock (RTC) is mounted in the way of Surface Mount.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.If Alarm, Leap Year, NVSRAM, Square Wave Output, Supervisor, Watchdog Timer is ensured when operating, then the operation will be successful.With 28 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.Obviously, a voltage of 3V is being supplied to this electronic component.There are 28 pins on it.The M41ST family contains RTCs .A crucial thing to remember is that this electrical digital time clock has a supply voltage of 2.5V~3.5V.It is included as part of Timer or RTC.There should be no more than a 0.032MHz frequency at real time clocks' output.In this case, the RTC module has a mounting type of Surface Mount.28 pins are attached to it.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received.Maintaining the supply voltage at 3.3V is the key to high efficiency. M41ST85WMX6TR Features28-SOIC (0.295, 7.50mm Width) package 28 terminations 28 pin count Be maintained at 3.3V for high efficiency. M41ST85WMX6TR ApplicationsThere are a lot of STMicroelectronics M41ST85WMX6TR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M41T94MH6F Overviewreal time clocks is located in package 28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets.There is a way to package time clock in the form of a Tape & Reel (TR).This electrical RTC receives its power from the 2.7V~5.5V supply voltage.It is a Clock/Calendar type electrical real time clock.Here, Surface Mount represents how this part is mounted.Keeping the temperature at -40°C~85°C is essential to maintaining a safe working environment.When operating, electronic time clocks would be possible to ensure that the value Alarm, Leap Year, NVRAM, Square Wave Output, Watchdog Timer are maintained.There are 28 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.This electronic component receives a voltage of 3V.A total of 28 pins are equipped with the RTCs.M41T94 are a family of objects that belongs to RTCs .This electrical digital time clock has a 2.5V~3.5V supply voltage.The content of Timer or RTC includes this component.The frequency of real time clocks' output should not be higher than 0.032MHz.Mounting type Surface Mount is chosen for the RTC module.The power supply is 3/5V.A total of 28 pins are attached to this real time clock.Following an input signal, there are 1 timers that output a signal at a preset time. M41T94MH6F Features28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets package 28 terminations 28 pin count 3/5V power supplies M41T94MH6F ApplicationsThere are a lot of STMicroelectronics M41T94MH6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | PCF2123BS/1,518 OverviewReal time clocks is embedded in the 16-VFQFN Exposed Pad package.Time clock is packaged in the manner of Tape & Reel (TR).There is 1.6V~5.5V supply voltage for this electrical RTC.The electrical real time clock belongs to the type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.As far as the operating temperature are concerned, electronic time clocks should be -40°C~85°C.During the course of operation, Alarm, Leap Year, Square Wave Output, Watchdog Timer can be ensured.The 16 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.RTC real time clocks such as this one are powered by 2V voltage.It is equipped with 16 pins.PCF2123 are the family RTCs belongs to.Located in Timers or RTCs, this component is present.Real time clocks' output frequency should not exceed 0.032MHz.There is a power supply of 1.1/5.5V used to power the real time clock.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF2123BS/1,518 Features16-VFQFN Exposed Pad package 16 terminations 16 pin count 1.1/5.5V power supplies PCF2123BS/1,518 ApplicationsThere are a lot of NXP USA Inc. PCF2123BS/1,518 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | PCF2123TS/1,118 OverviewThere is a version of real time clocks in the package 14-TSSOP (0.173, 4.40mm Width).Basically, time clock is packaged in a way that is equivalent to Tape & Reel (TR).It requires a voltage of 1.6V~5.5V to be supplied.This electrical real time clock belongs to the Clock/Calendar category.This part is mounted on the systemboard in the way indicated by Surface Mount.The temperature should always be kept at -40°C~85°C to ensure safe operation.During the course of operation, Alarm, Leap Year, Square Wave Output, Watchdog Timer can be ensured.The 14 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.In this case, the voltage supplied to the electronic component is 1.6V.With its 14 pins, it has the necessary functions.PCF2123 are a family of objects that belongs to RTCs .In Timers or RTCs, this part is included.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.It operates from 1.1/5.5V power supplies.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF2123TS/1,118 Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 1.1/5.5V power supplies PCF2123TS/1,118 ApplicationsThere are a lot of NXP USA Inc. PCF2123TS/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M48T02-70PC1 OverviewThis real time analog clock can be found in package 24-DIP Module (0.600, 15.24mm).Time clock is packaged in the manner of Tube.Its supply voltage is 4.75V~5.5V.The type of this electrical real time clock is Clock/Calendar.The way this real time clock (RTC) is mounted on the system board is Through Hole.In order to operate properly, the temperature should be 0°C~70°C.Operating with Leap Year are possible.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.The supply voltage of this RTC real time clock is 5V.The RTCs are equipped with the necessary features due to its 24 pins.M48T02 are the family name of RTCs .There are such RTCs in Timer or RTC subcategory.It is possible to store data and programs on the real time analog clocks with a memory size of 16MB.This RTC module has a mounting type of Through Hole.As a power supply for the real time clock, a value of 5V is used.A total of 24 pins are equipped with the real time clock.RTC time is essential that the supply voltage remain at 5V for maximum efficiency.In the Timekeeper? series, it is a type of real time clock.In this case, 70GHz is the highest frequency possible. M48T02-70PC1 Features24-DIP Module (0.600, 15.24mm) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T02-70PC1 ApplicationsThere are a lot of STMicroelectronics M48T02-70PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | PCF8593T/1,118 OverviewIn package 8-SOIC (0.154, 3.90mm Width), real time clocks is located.Basically, time clock is packaged in a way that is equivalent to Tape & Reel (TR).2.5V~6V is the supply voltage of this electrical RTC.Electrical real time clock type Clock/Calendar.Surface Mount is the way to mount this real time clock (RTC).Ideally, the operating temperature should be -40°C~85°C.When operating, you can ensure Alarm, NVSRAM.The 8 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.The supply voltage of this RTC real time clock is 3V.There are 8 pins on it.PCF8593 are the family RTCs belongs to.This part is included in Timer or RTC.In the real time analog clocks, the available memory size is 8B.There should be no frequency greater than 0.032MHz in real time clocks' output.There is a power supply of 3/5V used to power the real time clock. PCF8593T/1,118 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3/5V power supplies PCF8593T/1,118 ApplicationsThere are a lot of NXP USA Inc. PCF8593T/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | PCF8523T/1,118 OverviewA package named 8-SOIC (0.154, 3.90mm Width) contains real time clocks.As of Tape & Reel (TR), time clock is packaged in this way.Electrical RTCs such as this have a 1.6V~5.5V supply.An electrical real time clock of type Clock/Calendar can be said to be this one.real time clock (RTC)s like this are mounted in the way of Surface Mount.The operating temperature should be -40°C~85°C.When a command are executed, electronic time clocks are possible to maintain Alarm, Leap Year, Watchdog Timer in order to maintain the current state.It is possible to terminate a transmission line with a RTC module that matches the characteristic impedance of the line, which is known as 8 termination.In the case of this RTC real time clock, there is 3V voltage supplied to it.A total of 8 pins are equipped with the RTCs.PCF8523 are a family of objects that belongs to RTCs .Keeping in mind that the supply voltage of this electrical digital time clock is 1.8V~5.5V is important.This component can be found in Timer or RTC.There should be no more than a 0.032MHz frequency at real time clocks' output.It operates from 1.2/5.5V power supplies.Following an input signal, there are 1 timers that output a signal at a preset time. PCF8523T/1,118 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 1.2/5.5V power supplies PCF8523T/1,118 ApplicationsThere are a lot of NXP USA Inc. PCF8523T/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.