My CartFlat Flex Cables (FFC, FPC)(1149)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Microchip Technology | MCP79520T-I/MN OverviewYou can find real time clocks in package 10-WFDFN Exposed Pad among the other packages that are available.A Tape & Reel (TR) package is used to package time clock.It requires a voltage of 1.8V~3.6V to be supplied.Electrical real time clock type Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted on the system board.A temperature of -40°C~85°C should be used for operation.When operating, electronic time clocks are possible to make sure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID remains constant in the process.There are 10 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.RTC real time clocks such as this one are powered by 3V voltage.MCP79520 are the family name of RTCs .A crucial thing to remember is that this electrical digital time clock has a supply voltage of 1.3V~3.6V.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 64B.There should not be a difference between real time clocks' output frequency and 5MHz.Surface Mount is the mounting type of the RTC module.A total of 10 pins are equipped with the real time clock. MCP79520T-I/MN Features10-WFDFN Exposed Pad package 10 terminations MCP79520T-I/MN ApplicationsThere are a lot of Microchip Technology MCP79520T-I/MN Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79402T-I/MNY OverviewThere is a package 8-WFDFN Exposed Pad that contains real time clocks.In this case, time clock is packaged in the way of Tape & Reel (TR).Unless otherwise stated, this electrical RTC's supply voltage is 1.8V~5.5V.The electrical real time clock belongs to the type Clock/Calendar.It should be noted that the real time clock (RTC) is mounted in the way of Surface Mount.The operating temperature should be -40°C~85°C.As long as Alarm, Leap Year, Square Wave Output, SRAM, Unique ID is ensured when operating, the system will work properly.A transmission line with 8 terminations possesses the characteristic impedance of the RTC module terminating it.RTC real time clocks such as this one are powered by 2.5V voltage.The RTCs are equipped with the necessary features due to its 8 pins.MCP79402 are the family RTCs belongs to.This electrical digital time clock's supply voltage is 1.3V~5.5V.In Timer or RTC, you can find this component.Programs and data can be stored in the 64B memory embedded in the RTC times.There should not be a frequency higher than 0.4MHz in the output.In this case, the RTC module is mounted in the way of Surface Mount.As a power supply for the real time clock, a value of 2/5V is used.8 pins are present on it.An input signal is received by 1 timers, which output a signal after a preset time. MCP79402T-I/MNY Features8-WFDFN Exposed Pad package 8 terminations 8 pin count 2/5V power supplies MCP79402T-I/MNY ApplicationsThere are a lot of Microchip Technology MCP79402T-I/MNY Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79401T-I/MS OverviewIn the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, real time clocks is embedded as a dependency.As a result, time clock is packaged in the same way as Tape & Reel (TR).This electrical RTC receives its power from the 1.8V~5.5V supply voltage.This electrical real time clock has the type Clock/Calendar.Here, Surface Mount represents how this part is mounted.As far as the operating temperature are concerned, electronic time clocks should be -40°C~85°C.There is a way to make sure that Alarm, Leap Year, Square Wave Output, SRAM, Unique ID is maintained when operating if desired.When a transmission line is terminated with 8 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.It is possible to see 2.5V voltage being supplied to this RTC real time clock.It is equipped with the necessary features since it has 8 pins.MCP79401 are RTC s family.The voltage supply of this electrical digital time clock is 1.3V~5.5V.In Timer or RTC, this part is included.It should be noted that the RTC times embed a memory of 64B which is usable for storing programs and data as well.A frequency above 0.4MHz should not be used for real time clocks' output.It appears that the RTC module's mounting type is Surface Mount.For powering the real time clock, a power supply with a voltage of 2/5V is used.It is equipped with 8 pins.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received. MCP79401T-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79401T-I/MS ApplicationsThere are a lot of Microchip Technology MCP79401T-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79412T-I/MS OverviewIn the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, real time clocks is embedded as a dependency.Tape & Reel (TR) is the way time clock is packaged.Electrical RTCs such as this have a 1.8V~5.5V supply.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.This real time clock (RTC) is mounted in the way of Surface Mount.Temperature should be set at -40°C~85°C.Electronic time clocks are possible to guarantee Alarm, Leap Year, Square Wave Output, SRAM, Unique ID when operating.Transmission lines with 8 terminations have the characteristic impedance of their termination RTC modules.This RTC real time clock is powered by 5V volts.A total of 8 pins are equipped with the RTCs.MCP79412 are the family name of RTCs .A voltage of 1.3V~5.5V is required for the supply of this electrical digital time clock.Timers or RTCs is the subcategory in which the RTCs belongs.For storing data and programs, the RTC times embed a memory of 64B 1Kb.A frequency of 0.4MHz should not be exceeded by real time clocks' output.This RTC module is mounted using type Surface Mount.For powering the real time clock, a power supply with a voltage of 2/5V is used.It is equipped with 8 pins. MCP79412T-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79412T-I/MS ApplicationsThere are a lot of Microchip Technology MCP79412T-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79411T-I/MNY OverviewThe package 8-WFDFN Exposed Pad contains real time clocks.Packaged as Tape & Reel (TR).This electrical RTC has a supply voltage of 1.8V~5.5V.The type of this electrical real time clock is Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.A safe operation requires a temperature of -40°C~85°C at all times.As long as Alarm, Leap Year, Square Wave Output, SRAM, Unique ID is ensured when operating, the system will work properly.A transmission line can have a 8 termination by terminating it with a RTC module whose characteristic impedance matches the line's.Its supply voltage is 5V.The RTCs are equipped with the necessary features due to its 8 pins.RTCs are a member of the family MCP79411.A voltage of 1.3V~5.5V is supplied to this electrical digital time clock.In Timers or RTCs, this part is included.It is possible to store data and programs on the real time analog clocks with a memory size of 64B 1Kb.A frequency of 0.4MHz should not be exceeded by real time clocks' output.Mounting type Surface Mount matches the RTC module.A power supply of 2/5V is used to power it.The real time clock is equipped with 8 pins. MCP79411T-I/MNY Features8-WFDFN Exposed Pad package 8 terminations 8 pin count 2/5V power supplies MCP79411T-I/MNY ApplicationsThere are a lot of Microchip Technology MCP79411T-I/MNY Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79402-I/MS OverviewThe package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains real time clocks.Basically, time clock is packaged in a way that is equivalent to Tube.It is important to keep in mind that the supply voltage of this electrical RTC is 1.8V~5.5V.Electrical real time clock type Clock/Calendar.real time clock (RTC)s like this are mounted in the way of Surface Mount.-40°C~85°C is the operating temperature.When operating, Alarm, Leap Year, Square Wave Output, SRAM, Unique ID can be ensured.8 terminations result in transmission lines having the characteristic impedance of a RTC module terminating them.This RTC real time clock has a voltage supply of 2.5V which is provided to it.With its 8 pins, it has the necessary functions.MCP79402 are the family RTCs belongs to.The supply voltage of this electrical digital time clock is 1.3V~5.5V.Under the Timer or RTC subcategory, the RTCs belongs.The RTC times embed a memory of 64B available for storing programs and data.Real time clocks' output frequency should not exceed 0.4MHz.This RTC module is mounted using type Surface Mount.There is a power supply of 2/5V used to power the real time clock.With 8 pins, it is equipped.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received. MCP79402-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79402-I/MS ApplicationsThere are a lot of Microchip Technology MCP79402-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285ESSTRG4 OverviewThere is a package 24-SSOP (0.154, 3.90mm Width) that contains real time clocks.The package is in the form of Tape & Reel (TR).A voltage of 4.5V~5.5V is required for the supply of this electrical RTC.There is a type of electrical real time clock Clock/Calendar associated with this real time clock.There is an electronic component mounted in the way of Surface Mount.There should be a temperature of 0°C~70°C during the operation.If Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output is ensured during operation, then there is no problem.A transmission line with 24 terminations possesses the characteristic impedance of the RTC module terminating it.This RTC real time clock's supply voltage is 5V.With its 24 pins, it has the necessary functions.RTCs belongs to BQ3285 family.The supply voltage of this electrical digital time clock is 2.5V~4V.In Timer or RTC, you can find this component.A total of 242B of memory is available for storing data and programs on the real time analog clocks.Real time clocks' output frequency should not exceed 0.032MHz.Mounting type Surface Mount matches the RTC module.In order for it to be powered, it requires a power supply of 5V.A total of 24 pins are equipped with the real time clock.Upon receiving an input signal, 1 timers output a signal at a preset time.Optimal efficiency requires a supply voltage of 5V. BQ3285ESSTRG4 Features24-SSOP (0.154, 3.90mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285ESSTRG4 ApplicationsThere are a lot of Texas Instruments BQ3285ESSTRG4 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285ESTR Overview24-SOIC (0.295, 7.50mm Width) is where you'll find real time clocks.Tape & Reel (TR) is the way time clock is packaged, which is the way time clock is intended to be.The supply voltage of this electrical RTC is 4.5V~5.5V.An electrical real time clock of type Clock/Calendar can be said to be this one.real time clock (RTC)s like this are mounted in the way of Surface Mount.There should be a temperature of 0°C~70°C during the operation.In order to ensure Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output when operating, a certain value has to be set.There are 24 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.In this RTC real time clock, there is a voltage of 5V supplied to it.The RTCs are equipped with the necessary features due to its 24 pins.There are only one family in which RTCs belongs, and that are BQ3285.This electrical digital time clock has a 2.5V~4V supply voltage.This component can be found in Timer or RTC.A memory of 242B is embedded in the RTC times, which can be used to store programs and data.A frequency of 0.032MHz should not be exceeded by real time clocks' output frequency.Surface Mount is the mounting type of the RTC module.There is a power supply of 5V used to power the real time clock.There are 24 pins on it.1 timer real time clocks send out a signal at a preset time based on input signals.In order to achieve high efficiency, the supply voltage should be kept at 5V. BQ3285ESTR Features24-SOIC (0.295, 7.50mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285ESTR ApplicationsThere are a lot of Texas Instruments BQ3285ESTR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T56C64MY6E OverviewIn the 18-SOX, 18-SOIC with Crystal (7.5mm Width) package, real time clocks is embedded.This package has a package type of Tube.The supply voltage of this electrical RTC is 4.5V~5.5V.The type of this electrical real time clock is Clock/Calendar.This electronic component has been mounted in the way of Surface Mount.Ideally, the operating temperature should be -40°C~85°C.EEPROM, Leap Year, NVSRAM can be ensured when operating.Transmitter lines with 18 terminations exhibit the characteristic impedance of the terminating RTC module.This RTC real time clock has a voltage supply of 5V which is provided to it.18 pins are attached to it.M41T56 are a family of objects that belongs to RTCs .In this electrical digital time clock, the supply voltage is 2.5V~3.5V.Under the Timer or RTC subcategory, the RTCs belongs.In the real time analog clocks, the available memory size is 56B 8KB.The frequency of real time clocks' output should not be higher than 0.032MHz.There is a mounting type of Surface Mount for this RTC module.There is a power supply of 5V used to power the real time clock.18 pins are attached to it.Maintaining a voltage of 5V will result in high efficiency. M41T56C64MY6E Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count 5V power supplies Be maintained at 5V for high efficiency. M41T56C64MY6E ApplicationsThere are a lot of STMicroelectronics M41T56C64MY6E Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285S-SB2TR OverviewIn package 24-SOIC (0.295, 7.50mm Width), real time clocks is located.Packaged as Tape & Reel (TR).There is 4.5V~5.5V supply voltage for this electrical RTC.It can be said that this electrical real time clock belongs to the Clock/Calendar type.The position of this real time clock (RTC) on the system board is indicated by Surface Mount.There should be a temperature of 0°C~70°C during the operation.During operation, Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output can be guaranteed.There is the possibility of terminating transmission lines with 24 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.Obviously, a voltage of 5V is being supplied to this electronic component.As it has 24 pins, it is equipped with the necessary features.There are a family BQ3285 associated wit h thare object.A voltage of 2.5V~4V is supplied to this electrical digital time clock.The RTCs belongs to the Timer or RTC subcategory.In the RTC times you will find a memory of 114B which is available for your programs and data storage.The output frequency of this real time analog clock should not exceed 0.032MHz Hz.Mounting type for the RTC module is Surface Mount.As a power supply for the real time clock, a value of 5V is used.A total of 24 pins are attached to this real time clock.1 timers are in the real time clock that outputs a signal in response to an input signal.In order to achieve high efficiency, the supply voltage should be kept at 5V. BQ3285S-SB2TR Features24-SOIC (0.295, 7.50mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285S-SB2TR ApplicationsThere are a lot of Texas Instruments BQ3285S-SB2TR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285LFSS-A1G4 OverviewThere is a package 24-SSOP (0.154, 3.90mm Width) that contains real time clocks.The package is packaged in the way of Tube.A voltage of 2.7V~5.5V is required for the supply of this electrical RTC.This electrical real time clock is of type Clock/Calendar.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.The temperature should always be kept at 0°C~70°C to ensure safe operation.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output are maintained at all times.Transmitter lines with 24 terminations exhibit the characteristic impedance of the terminating RTC module.The supply voltage of this RTC real time clock is 3V.With its 24 pins, it has the necessary functions.BQ3285 are a family of objects that belongs to RTCs .Its supply voltage is 2.4V~4V.A component such as this is included in the contents of Timer or RTC.In the real time analog clocks, the available memory size is 242B.The frequency of real time clocks' output should not exceed 0.032MHz.RTC module mounting type Surface Mount is specified.In order for it to be powered, it requires a power supply of 3/5V.It is equipped with 24 pins.In order to achieve high efficiency, the supply voltage should be kept at 3V. BQ3285LFSS-A1G4 Features24-SSOP (0.154, 3.90mm Width) package 24 terminations 24 pin count 3/5V power supplies Be maintained at 3V for high efficiency. BQ3285LFSS-A1G4 ApplicationsThere are a lot of Texas Instruments BQ3285LFSS-A1G4 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ4845YS-A4TR OverviewThe package 28-SOIC (0.295, 7.50mm Width) contains real time clocks.Tape & Reel (TR) is the way in which time clock is packaged.Its supply voltage is 4.5V~5.5V.This electrical real time clock has the type Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted on the system board.There should be a temperature of 0°C~70°C during the operation.When operating, you can ensure Alarm, Daylight Savings, Leap Year, Supervisor, Watchdog Timer.Transmission lines can be terminated with 28 terminations, which means that the RTC module that terminates the line matches its characteristic impedance.5V is the supply voltage of this RTC real time clock.A total of 28 pins can be found on it.There are a family BQ4845 associated wit h thare object.The voltage supply of this electrical digital time clock is 2.3V~4V.There are such RTCs in Timer or RTC subcategory.Neither real time clocks' output frequency nor real time clocks' response frequency should exceed 0.032MHz.The RTC module is mounted with mounting type Surface Mount.There is a power supply of 5V used to power the real time clock.There are 28 pins on it.An input signal is received by 1 timers, which output a signal after a preset time.RTC time is important to maintain the supply voltage at 5V in order to maintain high efficiency. BQ4845YS-A4TR Features28-SOIC (0.295, 7.50mm Width) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4845YS-A4TR ApplicationsThere are a lot of Texas Instruments BQ4845YS-A4TR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T00SC64MY6F OverviewThe package 18-SOX, 18-SOIC with Crystal (7.5mm Width) contains real time clocks.There is a packaging method that is similar to Tape & Reel (TR).2.7V~5.5V is the supply voltage of this electrical RTC.The type of this electrical real time clock is Clock/Calendar.This part is mounted on the systemboard in the way indicated by Surface Mount.A safe operation requires a temperature of -40°C~85°C at all times.During operation, the value of EEPROM, Leap Year can be ensured.There are 18 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.3V is the supply voltage of this RTC real time clock.With 18 pins, it is equipped.M41T00 are a family of objects that belongs to RTCs .The voltage supply of this electrical digital time clock is 2.5V~35V.There are such RTCs in Timer or RTC subcategory.The RTC times within the system have a memory of 8KB available for storing data and programs for the purposes of the system.Mounting type is Surface Mount.18 pins are present on it.High efficiency requires a 5V supply voltage.There is 400kHz frequency that can be achieved. M41T00SC64MY6F Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count Be maintained at 5V for high efficiency. M41T00SC64MY6F ApplicationsThere are a lot of STMicroelectronics M41T00SC64MY6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285P-SB2E3 OverviewThe package 24-DIP (0.600, 15.24mm) contains real time clocks.As you can see, time clock is packaged as if time clock were in the form of Tube.Unless otherwise stated, this electrical RTC's supply voltage is 4.5V~5.5V.There is a type of electrical real time clock Clock/Calendar associated with this real time clock.This part is mounted on the systemboard in Through Hole mode.Ideally, the operating temperature should be 0°C~70°C.When operating, you can ensure Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output.There are 24 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.This RTC real time clock is powered by 5V volts.With its 24 pins, it has the necessary functions.The family to which RTCs belongs are BQ3285.In this electrical digital time clock, the supply voltage is 2.5V~4V.There are such RTCs in Timer or RTC subcategory.In these RTC times, there is a memory of 114B where data and programs can be stored.Real time clocks' output frequency should not exceed 0.032MHz.It is mounted in the way of Through Hole.There is a power supply of 5V used to power the real time clock.A total of 24 pins are equipped with the real time clock.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.Maintaining a voltage of 5V will result in high efficiency. BQ3285P-SB2E3 Features24-DIP (0.600, 15.24mm) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285P-SB2E3 ApplicationsThere are a lot of Texas Instruments BQ3285P-SB2E3 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T82SM6E OverviewYou can find real time clocks in package 8-SOIC (0.154, 3.90mm Width) among the other packages that are available.There is a packaging method that is similar to Tube.It requires a voltage of 3V~5.5V to be supplied.It can be said that this electrical real time clock belongs to the Clock/Calendar type.The way this real time clock (RTC) is mounted on the system board is Surface Mount.There should be a temperature of -40°C~85°C during the operation.Operating with Alarm, Leap Year, SRAM, Watchdog Timer are possible.In 8 terminations, a transmission line is terminated with an impedance-matched RTC module.In this case, the voltage supplied to the electronic component is 5V.It is equipped with the necessary features since it has 8 pins.As far as the family are concerned, RTCs are part of M41T82.As far as the supply voltage for this electrical digital time clock is concerned, it is 2V~5.5V.In Timers or RTCs, you can find this component.It is possible to store data and programs on the real time analog clocks with a memory size of 7B.The frequency of real time clocks' output should not exceed 0.4MHz.RTC module mounting type Surface Mount is specified.For the purpose of powering the real time clock, the power supply is set to 3.3/5V.It is equipped with 8 pins.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received.With 8 Bits, this digital time clock is designed. M41T82SM6E Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3.3/5V power supplies 8 Bits M41T82SM6E ApplicationsThere are a lot of STMicroelectronics M41T82SM6E Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T93RMY6E OverviewIn the 18-SOX, 18-SOIC with Crystal (7.5mm Width) package, real time clocks is embedded.The package is Tube.There is 2.7V~5.5V supply voltage for this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.Here, Surface Mount represents how this part is mounted.The temperature should always be kept at -40°C~85°C to ensure safe operation.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM, Watchdog Timer are maintained.The 18 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.3V is the supply voltage of this RTC real time clock.The board is equipped with a total of 18 pins.The family RTCs belongs to are M41T93.This electrical digital time clock has a 1.8V~5.5V supply voltage.It is included as part of Timers or RTCs.There should not be a frequency higher than 5MHz in the output.Surface Mount is the mounting type of the RTC module.In order for it to be powered, it requires a power supply of 3/5V.It is equipped with 18 pins.Upon receiving an input signal, 1 timers output a signal at a preset time.8 Bits are used in the design of this digital time clock. M41T93RMY6E Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count 3/5V power supplies 8 Bits M41T93RMY6E ApplicationsThere are a lot of STMicroelectronics M41T93RMY6E Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ4285S-SB2G4 OverviewThere is a package called 24-SOIC (0.295, 7.50mm Width) which contains real time clocks, and you can find real time clocks there.Tube is the way time clock is packaged.To supply this electrical RTC, a voltage of 4.5V~5.5V is required.Clock/Calendar is the type of this electrical real time clock.This part is mounted on the systemboard in Surface Mount mode.The operating temperature should be 0°C~70°C.During operation, the value of Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output can be ensured.There is the possibility of terminating transmission lines with 24 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.A voltage of 5V is applied to this electronic component.Due to its 24 pins, it has the necessary features.BQ4285 are RTC s family.There is a voltage of 2.5V~4V when powering this electrical digital time clock.Timer or RTC includes this component as part of its contents.In the RTC times, there is a memory of 114B that is available for storing programs as well as data.In order for it to work properly, real time clocks' output frequency should not exceed 0.032MHz.There is a mounting type of Surface Mount for this RTC module.There are 5V power supplies attached to it.It is equipped with 24 pins.An input signal is received by 1 timers, which output a signal after a preset time.A high efficiency supply voltage should be maintained at 5V. BQ4285S-SB2G4 Features24-SOIC (0.295, 7.50mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4285S-SB2G4 ApplicationsThere are a lot of Texas Instruments BQ4285S-SB2G4 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795B11-I/ST OverviewThere is an embedded version of real time clocks in the package 14-TSSOP (0.173, 4.40mm Width).Time clock is packaged in the manner of Tube.This electrical RTC has a supply voltage of 1.8V~5.5V.The type of this electrical real time clock is Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted.Electronic time clocks should be -40°C~85°C degrees Celsius during operation.If Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer is ensured during operation, then there is no problem.When a transmission line is terminated with 14 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.A voltage of 5V is applied to this electronic component.With 14 pins, it is equipped with the necessary functions.The family to which RTCs belongs are MCP795B11.This electrical digital time clock has a 1.3V~5.5V supply voltage.The RTCs belongs to the Timer or RTC subcategory.A memory of 64B is embedded into the RTC times for storing programs and data.Neither real time clocks' output frequency nor real time clocks' response frequency should exceed 10MHz.Amounting type Surface Mount is the one associated with the RTC module.The power supply is 2/5V.A total of 14 pins are equipped with the real time clock.There are also ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ characteristics.This digital time clock is designed with 8 Bits. MCP795B11-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795B11-I/ST ApplicationsThere are a lot of Microchip Technology MCP795B11-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795B11T-I/SL OverviewThere is a package called 14-SOIC (0.154, 3.90mm Width) which contains real time clocks, and you can find real time clocks there.Tape & Reel (TR) is the way time clock is packaged.A voltage of 1.8V~5.5V is supplied to this electrical RTC.This electrical real time clock has the type Clock/Calendar.A part of this electronic RTC module is mounted in the way of Surface Mount.The temperature should always be kept at -40°C~85°C to ensure safe operation.When operating, electronic time clocks are possible to ensure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer are maintained.With 14 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.A voltage of 5V is applied to this electronic component.A total of 14 pins are equipped with the RTCs.There are a family named MCP795B11 that consarets of the RTCs .Its supply voltage is 1.3V~5.5V.This part is included in Timer or RTC.It should be noted that the RTC times embed a memory of 64B which is usable for storing programs and data as well.Real time clocks' output frequency should not exceed 10MHz.For powering the real time clock, a power supply with a voltage of 2/5V is used.Additionally, it has ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ.It is designed with 8 bits. MCP795B11T-I/SL Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795B11T-I/SL ApplicationsThere are a lot of Microchip Technology MCP795B11T-I/SL Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP8570AV OverviewAmong the packages 28-LCC (J-Lead) is where real time clocks can be found.Tube is the way time clock is packaged, which is the way time clock is intended to be.To supply this electrical RTC, a voltage of 4.5V~5.5V is required.This electrical real time clock has the type Timer Clock Peripheral (TCP).This part is mounted on the systemboard in the way indicated by Surface Mount.Electronic time clocks should be -40°C~85°C degrees Celsius during operation.When operating, you can ensure Alarm, Leap Year.There are 28 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.5V voltage is present on this electronic component.With 28 pins, it is equipped with the necessary functions.DP8570 are the family RTCs belongs to.This electrical digital time clock has a 2.2V~5.1V supply voltage.It falls under the subcategory of Timer or RTC.A memory of 44B can be used to store data and programs.RTC module mounting type Surface Mount is specified.It is equipped with 28 pins.2 timers are used in this system. They output a signal after an input signal is received at a predetermined time.Optimal efficiency can be achieved by maintaining the supply voltage at 5V.Additionally, it has 4 PROGRAMMABLE MODES FOR TIMER; 4 SELECTABLE OSCILLATOR FREQUENCIES.16 Bits are used in the design of this digital time clock. DP8570AV Features28-LCC (J-Lead) package 28 terminations 28 pin count Be maintained at 5V for high efficiency. 16 Bits DP8570AV ApplicationsThere are a lot of Texas Instruments DP8570AV Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP8573AV OverviewThere is a package called 28-LCC (J-Lead) which contains real time clocks, and you can find real time clocks there.Time clock is packaged in the way of Tube.A voltage of 4.5V~5.5V is required for the supply of this electrical RTC.This electrical real time clock belongs to the Clock/Calendar category.The real time clock (RTC) that is mounted in the way of Surface Mount is connected to this circuit board.Electronic time clocks are recommended to operate at a temperature of -40°C~85°C.In order to ensure Alarm, Leap Year when operating, a certain value has to be set.In 28 terminations, a transmission line is terminated with an impedance-matched RTC module.This RTC real time clock is powered by 5V volts.A total of 28 pins are equipped with the RTCs.The family RTCs belongs to are DP8573.Its supply voltage is 2.2V~5.1V.A component such as this is included in the contents of Timer or RTC.The RTC times embed a memory of 32B available for storing programs and data.This RTC module is mounted using type Surface Mount.It is equipped with 28 pins.In order to achieve high efficiency, the supply voltage should be kept at 5V.PRESCALED XTAL OSCILLATOR OUTPUT FOR RTC; POWER FAIL I/P FOR BUS LOCK-OUT are other characteristics of it. DP8573AV Features28-LCC (J-Lead) package 28 terminations 28 pin count Be maintained at 5V for high efficiency. DP8573AV ApplicationsThere are a lot of Texas Instruments DP8573AV Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795B22-I/ST OverviewIn package 14-TSSOP (0.173, 4.40mm Width), real time clocks can be found.Packaged as Tube.In this electrical RTC, the supply voltage is 1.8V~5.5V.This electrical real time clock has the type Clock/Calendar.In this case, Surface Mount is the way this part is mounted on the systemboard.The operating temperature should be -40°C~85°C.When operating, electronic time clocks would be possible to ensure that the value Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer are maintained.With 14 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.This RTC real time clock has a voltage supply of 5V which is provided to it.The RTCs are equipped with 14 pins.In the family MCP795B22, RTCs are a member.Its supply voltage is 1.3V~5.5V.Located in Timer or RTC, this component is present.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 64B.Ensure that the output frequency does not exceed 10MHz.Mounting type is Surface Mount.There are 2/5V power supplies attached to it.The real time clock is equipped with 14 pins.ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are also characteristics of it.With 8 Bits, this digital time clock is designed. MCP795B22-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795B22-I/ST ApplicationsThere are a lot of Microchip Technology MCP795B22-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795B21-I/SL OverviewAmong the packages 14-SOIC (0.154, 3.90mm Width) is where real time clocks can be found.Tube is the packaging method.In this electrical RTC, the supply voltage is 1.8V~5.5V.This electrical real time clock is of type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.There should be a temperature of -40°C~85°C during the operation.During operation, Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer can be guaranteed.A transmission line with 14 terminations possesses the characteristic impedance of the RTC module terminating it.Obviously, a voltage of 5V is being supplied to this electronic component.With its 14 pins, it has the necessary functions.There are a family MCP795B21 associated wit h thare object.In this electrical digital time clock, the supply voltage is 1.3V~5.5V.It falls under the subcategory of Timer or RTC.The RTC times embed a memory of 64B available for storing programs and data.The output frequency should not exceed 10MHz.A power supply of 2/5V is used to power it.It is also characterized by ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ.Digital time clocks with 8 bits are designed for this application. MCP795B21-I/SL Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795B21-I/SL ApplicationsThere are a lot of Microchip Technology MCP795B21-I/SL Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP8570AVX OverviewThe package 28-LCC (J-Lead) contains real time clocks.There is a packaging method that is similar to Tape & Reel (TR).Its supply voltage is 4.5V~5.5V.Electrical real time clocks of type Timer Clock Peripheral (TCP) are involved.There is an real time clock (RTC) mounted in the way of Surface Mount.Ideally, the operating temperature should be -40°C~85°C.When a command are executed, electronic time clocks are possible to maintain Alarm, Leap Year in order to maintain the current state.A transmission line can have a 28 termination by terminating it with a RTC module whose characteristic impedance matches the line's.RTC real time clocks like this have a 5V supply voltage.The RTCs are equipped with the necessary features due to its 28 pins.RTCs belongs to DP8570 family.This electrical digital time clock has a supply voltage of 2.2V~5.1V.In Timer or RTC, you can find this component.There is a memory size of 44B available for storing data and programs on the real time analog clocks.The frequency of real time clocks' output should not exceed 10MHz.Amounting type Surface Mount is the one associated with the RTC module.A total of 28 pins are equipped with the real time clock.2 timers are control real time clocks that emits a signal after receiving an input signal at a predetermined time.Maintaining a voltage of 5V will result in high efficiency.Additionally, it has 4 PROGRAMMABLE MODES FOR TIMER; 4 SELECTABLE OSCILLATOR FREQUENCIES.A 16 bit digital time clock is designed for this application. DP8570AVX Features28-LCC (J-Lead) package 28 terminations 28 pin count Be maintained at 5V for high efficiency. 16 Bits DP8570AVX ApplicationsThere are a lot of Texas Instruments DP8570AVX Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795B12-I/SL OverviewThere is a package 14-SOIC (0.154, 3.90mm Width) that contains real time clocks.The package is packaged in the way of Tube.Electrical RTCs such as this have a 1.8V~5.5V supply.This electrical real time clock is type Clock/Calendar.This real time clock (RTC) is mounted in the way of Surface Mount.There should be a temperature of -40°C~85°C during the operation.During operation, Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer can be guaranteed.In the case of 14 terminations, transmission lines have the characteristic impedance of the terminating RTC module.It is possible to see 5V voltage being supplied to this RTC real time clock.It is equipped with 14 pins.There are only one family in which RTCs belongs, and that are MCP795B12.Its supply voltage is 1.3V~5.5V.Timer or RTC is the subcategory in which the RTCs belongs.A memory of 64B is embedded into the RTC times for storing programs and data.In order for it to work properly, real time clocks' output frequency should not exceed 10MHz.A total of 2/5V power supplies are required to operate it.ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are other characteristics of it.A digital time clock with 8 bits is designed for this application. MCP795B12-I/SL Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795B12-I/SL ApplicationsThere are a lot of Microchip Technology MCP795B12-I/SL Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics |
999
In-stock
|
Get Quote | ||||
| STMicroelectronics | M41T11M6E OverviewThis real time analog clock can be found in package 8-SOIC (0.154, 3.90mm Width).As a result, time clock is packaged in the same way as Tube.There is a voltage of 2V~5.5V when powering this electrical RTC.Electrical real time clock type Clock/Calendar.real time clock (RTC)s like this are mounted in the way of Surface Mount.A safe operation requires a temperature of -40°C~85°C at all times.When operating, electronic time clocks are possible to ensure that Leap Year, NVSRAM are maintained.There is the possibility of terminating transmission lines with 8 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.A total of 8 pins are attached to this RTCs.The family in which RTCs belongs are M41T11.This electrical digital time clock has a supply voltage of 2.5V~3.5V.In Timer or RTC, this part is included.There should be no frequency greater than 0.032MHz in real time clocks' output.The mounting type of the RTC module is Surface Mount.It operates from 2.5/5V power supplies.There are 8 pins on it. M41T11M6E Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2.5/5V power supplies M41T11M6E ApplicationsThere are a lot of STMicroelectronics M41T11M6E Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ4802LYDSH OverviewIn package 28-SOIC (0.337, 8.56mm Width) with SNAPHAT Sockets, real time clocks is located.As of Tube, time clock is packaged in this way.A voltage of 2.7V~3.6V is supplied to this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.The position of this real time clock (RTC) on the system board is indicated by Surface Mount.0°C~70°C is the operating temperature.In order to ensure Alarm, Daylight Savings, Leap Year, Supervisor, Watchdog Timer when operating, a certain value has to be set.There are 28 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.3.3V voltage is present on this electronic component.A total of 28 pins are equipped with the RTCs.In terms of RTCs family, RTCs belongs to BQ4802.Keeping in mind that the supply voltage of this electrical digital time clock is 2.4V~4V is important.It falls under the subcategory of Timer or RTC.It should not exceed 0.032MHz as the output frequency of the real time analog clock.There is a type of mounting for this RTC module: Surface Mount.The real time clock is equipped with 28 pins.1 timers are used in this system. They output a signal after an input signal is received at a predetermined time.RTC time is essential that the supply voltage remain at 3.3V for maximum efficiency. BQ4802LYDSH Features28-SOIC (0.337, 8.56mm Width) with SNAPHAT Sockets package 28 terminations 28 pin count Be maintained at 3.3V for high efficiency. BQ4802LYDSH ApplicationsThere are a lot of Texas Instruments BQ4802LYDSH Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T11MH6E OverviewThis real time analog clock can be found in package 28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets.This package has a package type of Tube.In this electrical RTC, the supply voltage is 2V~5.5V.In this case, we are dealing with an electrical real time clock that has a type of Clock/Calendar.This part is mounted on the systemboard in the way indicated by Surface Mount.A temperature of -40°C~85°C should be used for operation.When operating as part of a process, electronic time clocks are possible to ensure that Leap Year, NVSRAM are maintained at all times.28 terminations are available for transmission lines, implying that the RTC module terminating the line matches its characteristic impedance.A total of 28 pins can be found on it.The family in which RTCs belongs are M41T11.There is 2.5V~3.5V supply voltage for this electrical digital time clock.Under the Timer or RTC subcategory, the RTCs belongs.Ensure that the output frequency does not exceed 0.032MHz.There is a type of mounting for this RTC module: Surface Mount.For powering the real time clock, a power supply with a voltage of 2.5/5V is used.A total of 28 pins are attached to this real time clock. M41T11MH6E Features28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets package 28 terminations 28 pin count 2.5/5V power supplies M41T11MH6E ApplicationsThere are a lot of STMicroelectronics M41T11MH6E Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T201Y-70MH1E Overviewreal time clocks is located in package 44-BSOP (0.337, 8.56mm Width) requires SNAPHAT.Tube is the way in which time clock is packaged.As far as the supply voltage for this electrical RTC is concerned, it is 4.5V~5.5V.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.This electronic component has been mounted in the way of Surface Mount.Electronic time clocks are recommended that the operating temperature be 0°C~70°C.During operation, Alarm, Leap Year, Square Wave Output, Supervisor, Watchdog Timer, Y2K can be guaranteed.Transmitter lines with 44 terminations exhibit the characteristic impedance of the terminating RTC module.There is 5V voltage supplied to this RTC real time clock.A total of 44 pins are attached to this RTCs.In terms of RTCs family, RTCs belongs to M48T201.A voltage of 3V is supplied to this electrical digital time clock.This part is included in Timer or RTC.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 512kB.This RTC module is mounted using type Surface Mount.The power supply is 5V.44 pins are attached to it.1 timers are in the real time clock that outputs a signal in response to an input signal.RTC time is important to maintain the supply voltage at 5V in order to maintain high efficiency.It is a real-time clock in the series Timekeeper?.There is a frequency of 70GHz that can be achieved. M48T201Y-70MH1E Features44-BSOP (0.337, 8.56mm Width) requires SNAPHAT package 44 terminations 44 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T201Y-70MH1E ApplicationsThere are a lot of STMicroelectronics M48T201Y-70MH1E Real Time Clocks applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
