My CartFlat Flex Cables (FFC, FPC)(1149)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| NXP Semiconductors | PCF2123BS/1,518 OverviewReal time clocks is embedded in the 16-VFQFN Exposed Pad package.Time clock is packaged in the manner of Tape & Reel (TR).There is 1.6V~5.5V supply voltage for this electrical RTC.The electrical real time clock belongs to the type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.As far as the operating temperature are concerned, electronic time clocks should be -40°C~85°C.During the course of operation, Alarm, Leap Year, Square Wave Output, Watchdog Timer can be ensured.The 16 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.RTC real time clocks such as this one are powered by 2V voltage.It is equipped with 16 pins.PCF2123 are the family RTCs belongs to.Located in Timers or RTCs, this component is present.Real time clocks' output frequency should not exceed 0.032MHz.There is a power supply of 1.1/5.5V used to power the real time clock.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF2123BS/1,518 Features16-VFQFN Exposed Pad package 16 terminations 16 pin count 1.1/5.5V power supplies PCF2123BS/1,518 ApplicationsThere are a lot of NXP USA Inc. PCF2123BS/1,518 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T35-70PC1 Overview28-DIP Module (0.600, 15.24mm) is where you'll find real time clocks.In this case, time clock is packaged in the way of Tube.The supply voltage of this electrical RTC is 4.75V~5.5V.Electrical real time clocks of this type are Clock/Calendar.This real time clock (RTC) is mounted in the way of Through Hole.Ideally, the operating temperature should be set to 0°C~70°C.When a command are executed, electronic time clocks are possible to maintain Leap Year in order to maintain the current state.It is possible to terminate transmission lines with 28 terminations, which means that the RTC module terminating the line matches its characteristic impedance.In the case of this RTC real time clock, there is 5V voltage supplied to it.The RTCs are equipped with the necessary features due to its 28 pins.As far as the family are concerned, RTCs are part of M48T35.Under the Timers or RTCs subcategory, the RTCs belongs.It is possible to store data and programs on the real time analog clocks with a memory size of 32MB.In this case, the RTC module is mounted in the way of Through Hole.As a power supply for the real time clock, a value of 5V is used.A total of 28 pins are attached to this real time clock.Maintaining a voltage of 5V will result in high efficiency.In the series Timekeeper?, it belongs to the real-time clock category.There is 32.768kHz frequency that can be achieved. M48T35-70PC1 Features28-DIP Module (0.600, 15.24mm) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T35-70PC1 ApplicationsThere are a lot of STMicroelectronics M48T35-70PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79522-I/MS OverviewThere is a package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) that contains real time clocks.Tube is the way in which time clock is packaged.As far as the supply voltage for this electrical RTC is concerned, it is 1.8V~3.6V.Electrical real time clock type Clock/Calendar.real time clock (RTC)s like this are mounted in the way of Surface Mount.The operating temperature should be -40°C~85°C.When running a program, electronic time clocks may be possible to ensure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID are maintained at all times.Transmission lines with 10 terminations have the characteristic impedance of the RTC module terminating them.In this RTC real time clock, there is a voltage of 3V supplied to it.RTCs belongs to MCP79522 family.A voltage of 1.3V~3.6V is required for the supply of this electrical digital time clock.A real time analog clock's memory size is 64B, which is available for storing programs and data.It should not exceed 5MHz as the output frequency of the real time analog clock.There are 10 pins on it. MCP79522-I/MS Features10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 terminations MCP79522-I/MS ApplicationsThere are a lot of Microchip Technology MCP79522-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T37V-10MH1F OverviewThere is a version of real time clocks in the package 44-BSOP (0.337, 8.56mm Width) requires SNAPHAT.As a result, time clock is packaged in the same way as Tape & Reel (TR).It requires a voltage of 3V~3.6V to be supplied.Electrical real time clock type Clock/Calendar.A part of this electronic RTC module is mounted in the way of Surface Mount.0°C~70°C is the operating temperature.As long as Alarm, Leap Year, Watchdog Timer is ensured when operating, the system will work properly.A transmission line with 44 terminations possesses the characteristic impedance of the RTC module terminating it.There is 3.3V voltage supplied to this RTC real time clock.It is equipped with 44 pins.M48T37 are RTC s family.Located in Timer or RTC, this component is present.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 250kB.A Surface Mount mounting type is assigned to the RTC module.There are 44 pins on it.A high efficiency supply voltage should be maintained at 3.3V.It is a real-time clock in the series Timekeeper?.It is possible to reach a frequency of 100GHz.With 8 Bits, this digital time clock is designed. M48T37V-10MH1F Features44-BSOP (0.337, 8.56mm Width) requires SNAPHAT package 44 terminations 44 pin count Be maintained at 3.3V for high efficiency. Timekeeper? series 8 Bits M48T37V-10MH1F ApplicationsThere are a lot of STMicroelectronics M48T37V-10MH1F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940N-I/MS OverviewThis can be found in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).A Tube package is used to package time clock.In this electrical RTC, the supply voltage is 1.8V~5.5V.Clock/Calendar is the type of electrical real time clock that is being used.Surface Mount indicates how this real time clock (RTC) is mounted.Temperature should be set at -40°C~85°C.There is a way to make sure that Alarm, Leap Year, Square Wave Output, SRAM is maintained when operating if desired.Transmission lines with 8 terminations have the characteristic impedance of the RTC module terminating them.A voltage of 2.5V is applied to this electronic component.The RTCs are equipped with 8 pins.There are a family MCP7940N associated wit h thare object.This electrical digital time clock has a supply voltage of 1.3V~5.5V.A component such as this is included in the contents of Timer or RTC.The RTC times embed a memory of 64B available for storing programs and data.There should be no frequency greater than 0.032MHz in real time clocks' output.Mounting type Surface Mount matches the RTC module.There are 2/5V power supplies attached to it.A total of 8 pins are attached to this real time clock.It is a type of real time clock belonging to the Automotive, AEC-Q100 series. MCP7940N-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies Automotive, AEC-Q100 series MCP7940N-I/MS ApplicationsThere are a lot of Microchip Technology MCP7940N-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2123TS/1,118 OverviewThere is a version of real time clocks in the package 14-TSSOP (0.173, 4.40mm Width).Basically, time clock is packaged in a way that is equivalent to Tape & Reel (TR).It requires a voltage of 1.6V~5.5V to be supplied.This electrical real time clock belongs to the Clock/Calendar category.This part is mounted on the systemboard in the way indicated by Surface Mount.The temperature should always be kept at -40°C~85°C to ensure safe operation.During the course of operation, Alarm, Leap Year, Square Wave Output, Watchdog Timer can be ensured.The 14 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.In this case, the voltage supplied to the electronic component is 1.6V.With its 14 pins, it has the necessary functions.PCF2123 are a family of objects that belongs to RTCs .In Timers or RTCs, this part is included.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.It operates from 1.1/5.5V power supplies.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF2123TS/1,118 Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 1.1/5.5V power supplies PCF2123TS/1,118 ApplicationsThere are a lot of NXP USA Inc. PCF2123TS/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T02-70PC1 OverviewThis real time analog clock can be found in package 24-DIP Module (0.600, 15.24mm).Time clock is packaged in the manner of Tube.Its supply voltage is 4.75V~5.5V.The type of this electrical real time clock is Clock/Calendar.The way this real time clock (RTC) is mounted on the system board is Through Hole.In order to operate properly, the temperature should be 0°C~70°C.Operating with Leap Year are possible.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.The supply voltage of this RTC real time clock is 5V.The RTCs are equipped with the necessary features due to its 24 pins.M48T02 are the family name of RTCs .There are such RTCs in Timer or RTC subcategory.It is possible to store data and programs on the real time analog clocks with a memory size of 16MB.This RTC module has a mounting type of Through Hole.As a power supply for the real time clock, a value of 5V is used.A total of 24 pins are equipped with the real time clock.RTC time is essential that the supply voltage remain at 5V for maximum efficiency.In the Timekeeper? series, it is a type of real time clock.In this case, 70GHz is the highest frequency possible. M48T02-70PC1 Features24-DIP Module (0.600, 15.24mm) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T02-70PC1 ApplicationsThere are a lot of STMicroelectronics M48T02-70PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8593T/1,118 OverviewIn package 8-SOIC (0.154, 3.90mm Width), real time clocks is located.Basically, time clock is packaged in a way that is equivalent to Tape & Reel (TR).2.5V~6V is the supply voltage of this electrical RTC.Electrical real time clock type Clock/Calendar.Surface Mount is the way to mount this real time clock (RTC).Ideally, the operating temperature should be -40°C~85°C.When operating, you can ensure Alarm, NVSRAM.The 8 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.The supply voltage of this RTC real time clock is 3V.There are 8 pins on it.PCF8593 are the family RTCs belongs to.This part is included in Timer or RTC.In the real time analog clocks, the available memory size is 8B.There should be no frequency greater than 0.032MHz in real time clocks' output.There is a power supply of 3/5V used to power the real time clock. PCF8593T/1,118 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3/5V power supplies PCF8593T/1,118 ApplicationsThere are a lot of NXP USA Inc. PCF8593T/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T58Y-70PC1 DescriptionThe M48T58Y-70PC1 is an 8 Kb x 8 non-volatile static RAM and real-time clock. The monolithic chip is available in two special packages to provide a highly integrated battery-backed memory and real-time clock solution. M48T58Y-70PC1 Features
M48T58Y-70PC1 Applications
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79510T-I/MS OverviewIn package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), real time clocks can be found.Packaged as Tape & Reel (TR).There is 1.8V~3.6V voltage supply for this electrical RTC.Electrical real time clocks of type Clock/Calendar are involved.Here, Surface Mount represents how this part is mounted.Ideally, the operating temperature should be set to -40°C~85°C.If Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID is ensured when operating, then the operation will be successful.It is possible to terminate transmission lines with 10 terminations, which means that the RTC module terminating the line matches its characteristic impedance.There is 3V voltage supplied to this RTC real time clock.There are a family named MCP79510 that consarets of the RTCs .This electrical digital time clock is powered by a voltage that is 1.3V~3.6V at the time of installation.Programs and data can be stored in the 64B memory embedded in the RTC times.A frequency of 5MHz should not be exceeded by real time clocks' output.A mounting type of Surface Mount has been specified for this RTC module.A total of 10 pins are equipped with the real time clock. MCP79510T-I/MS Features10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 terminations MCP79510T-I/MS ApplicationsThere are a lot of Microchip Technology MCP79510T-I/MS Real Time Clocks applications.
|
8921
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2127T/2Y OverviewThere is an embedded version of real time clocks in the package 16-SOIC (0.295, 7.50mm Width).Time clock is packaged in the manner of Tape & Reel (TR).There is 1.8V~4.2V supply voltage for this electrical RTC.Clock/Calendar is the type of this electrical real time clock.real time clock (RTC)s like this are mounted in the way of Surface Mount.As far as the operating temperature are concerned, electronic time clocks should be -40°C~85°C.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM, TCXO/Crystal, Watchdog Timer are maintained at all times.A transmission line can have a 16 termination by terminating it with a RTC module whose characteristic impedance matches the line's.In this RTC real time clock, there is a voltage of 2V supplied to it.16 pins are attached to it.In terms of RTCs family, RTCs belongs to PCF2127.This electrical digital time clock has a 1.8V~4.2V supply voltage.In the subcategory of Timers or RTCs, the RTCs can be found.A total of 512B of memory is available for storing data and programs on the real time analog clocks.A frequency above 0.032MHz should not be used for real time clocks' output.In order for it to be powered, it requires a power supply of 2/4V.Following an input signal, there are 1 timers that output a signal at a preset time. PCF2127T/2Y Features16-SOIC (0.295, 7.50mm Width) package 16 terminations 16 pin count 2/4V power supplies PCF2127T/2Y ApplicationsThere are a lot of NXP USA Inc. PCF2127T/2Y Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T12-150PC1 OverviewYou can find real time clocks in package 24-DIP Module (0.600, 15.24mm) among the other packages that are available.This package has a package type of Tube.This electrical RTC has a supply voltage of 4.5V~5.5V.Electrical real time clock type Clock/Calendar.A part of this electronic RTC module is mounted in the way of Through Hole.0°C~70°C should be the operating temperature.When operating as part of a process, electronic time clocks are possible to ensure that Leap Year are maintained at all times.There are 24 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.RTC real time clocks such as this one are powered by 5V voltage.With 24 pins, it is equipped.In the family M48T12, RTCs are a member.In Timer or RTC, you can find this component.It should be noted that the RTC times embed a memory of 2kB which is usable for storing programs and data as well.The RTC module is mounted with mounting type Through Hole.For powering the real time clock, a power supply with a voltage of 5V is used.With 24 pins, it is equipped.A high efficiency supply voltage should be maintained at 5V.It is a real-time clock in the series Timekeeper?.There are also 10 YEARS DATA RETENTION; ACCURACY 1 MIN/MONTH @ 25 DEGREE C; WRITE PROTECT VOLTAGE = 4.2V characteristics.In this case, 150GHz is the highest frequency possible. M48T12-150PC1 Features24-DIP Module (0.600, 15.24mm) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. Timekeeper? series M48T12-150PC1 ApplicationsThere are a lot of STMicroelectronics M48T12-150PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M48T08-150PC1 OverviewYou can find real time clocks in package 28-DIP Module (0.600, 15.24mm) among the other packages that are available.Tube is the packaging method.There is 4.75V~5.5V voltage supply for this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.This part is mounted on the systemboard in the way indicated by Through Hole.Electronic time clocks should be 0°C~70°C degrees Celsius during operation.In order to ensure Leap Year, Watchdog Timer when operating, a certain value has to be set.There is the possibility of terminating transmission lines with 28 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.This RTC real time clock is supplied with 5V voltage.Due to its 28 pins, it has the necessary features.M48T08 are the family RTCs belongs to.In the subcategory of Timer or RTC, the RTCs can be found.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 8kB.There is a mounting type of Through Hole for this RTC module.It is equipped with 28 pins.Optimal efficiency requires a supply voltage of 5V.It is a real-time clock in the series Timekeeper?.In this case, 32.768kHz is the highest frequency possible. M48T08-150PC1 Features28-DIP Module (0.600, 15.24mm) package 28 terminations 28 pin count Be maintained at 5V for high efficiency. Timekeeper? series M48T08-150PC1 ApplicationsThere are a lot of STMicroelectronics M48T08-150PC1 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF85063TP/1Z OverviewA package named 8-WFDFN Exposed Pad contains real time clocks.The package is Cut Tape (CT).Its supply voltage is 0.9V~5.5V.Electrical real time clocks of this type are Clock/Calendar.Surface Mount indicates how this real time clock (RTC) is mounted.In order to operate properly, the temperature should be -40°C~85°C.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output are maintained at all times.A transmission line with 8 terminations possesses the characteristic impedance of the RTC module terminating it.This RTC real time clock is powered by 3.3V volts.A total of 8 pins are equipped with the RTCs.In terms of RTCs family, RTCs belongs to PCF85063.Timers or RTCs is the subcategory in which the RTCs belongs.As a power supply for the real time clock, a value of 1.2/5V is used.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF85063TP/1Z Features8-WFDFN Exposed Pad package 8 terminations 8 pin count 1.2/5V power supplies PCF85063TP/1Z ApplicationsThere are a lot of NXP USA Inc. PCF85063TP/1Z Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W20-I/ST OverviewIn the 14-TSSOP (0.173, 4.40mm Width) package, real time clocks is embedded as a dependency.There is a way to package time clock in the form of a Tube.A voltage of 1.8V~3.6V is supplied to this electrical RTC.This electrical real time clock is type Clock/Calendar.Surface Mount is the way to mount this real time clock (RTC).Temperatures should be kept at -40°C~85°C at all times for safe operation.When operating, electronic time clocks are possible to make sure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Watchdog Timer remains constant in the process.There are 14 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.RTC real time clocks such as this one are powered by 5V voltage.14 pins are present on it.In the family MCP795W20, RTCs are a member.A voltage of 1.3V~3.6V is required for the supply of this electrical digital time clock.Timer or RTC is the subcategory in which the RTCs belongs.A real time analog clock's memory size is 64B, which is available for storing programs and data.There should be no frequency greater than 10MHz in real time clocks' output.Mounting type Surface Mount matches the RTC module.For powering the real time clock, a power supply with a voltage of 2/5V is used.It is equipped with 14 pins.ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are other characteristics of it.Digital time clocks with 8 bits are designed for this application. MCP795W20-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W20-I/ST ApplicationsThere are a lot of Microchip Technology MCP795W20-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2129AT/2,518 OverviewThe package 20-SOIC (0.295, 7.50mm Width) contains real time clocks.A Tape & Reel (TR) package is used to package time clock.Its supply voltage is 1.8V~4.2V.It can be said that this electrical real time clock belongs to the Clock/Calendar type.Surface Mount is the way this real time clock (RTC) is mounted.A temperature of -40°C~85°C should be used for operation.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, TCXO/Crystal, Watchdog Timer are maintained.With 20 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.A voltage of 3.3V is applied to this electronic component.20 pins are present on it.The family to which RTCs belongs are PCF2129.Note that the supply voltage is 1.8V~4.2V for this electrical digital time clock.In Timers or RTCs, you can find this component.There is a power supply of 2/4V used to power the real time clock.1 timers are control real time clocks that emits a signal after receiving an input signal at a predetermined time. PCF2129AT/2,518 Features20-SOIC (0.295, 7.50mm Width) package 20 terminations 20 pin count 2/4V power supplies PCF2129AT/2,518 ApplicationsThere are a lot of NXP USA Inc. PCF2129AT/2,518 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ4802YDWR OverviewThere is an embedded version of real time clocks in the package 28-SOIC (0.295, 7.50mm Width).The package is in the form of Tape & Reel (TR).This electrical RTC is powered by a voltage that is 4.5V~5.5V at the time of installation.This electrical real time clock has the type Clock/Calendar.This part is mounted on the systemboard in Surface Mount mode.0°C~70°C is the operating temperature.If Alarm, Daylight Savings, Leap Year, Supervisor, Watchdog Timer is ensured during operation, then there is no problem.In 28 terminations, a transmission line is terminated with an impedance-matched RTC module.This RTC real time clock's supply voltage is 5V.Due to its 28 pins, it has the necessary features.There are only one family in which RTCs belongs, and that are BQ4802.The supply voltage of this electrical digital time clock is 2.4V~4V.The content of Timer or RTC includes this component.Real time clocks' output frequency should not exceed 0.032MHz.In this case, the RTC module has a mounting type of Surface Mount.A power supply of 5V is used to power it.It is equipped with 28 pins.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.High efficiency requires a 5V supply voltage. BQ4802YDWR Features28-SOIC (0.295, 7.50mm Width) package 28 terminations 28 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ4802YDWR ApplicationsThere are a lot of Texas Instruments BQ4802YDWR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8563T/F4,112 OverviewReal time clocks is embedded in the 8-SOIC (0.154, 3.90mm Width) package.Time clock is packaged in the way of Tube.There is 1.8V~5.5V voltage supply for this electrical RTC.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.In this case, Surface Mount is the way this part is mounted on the systemboard.Electronic time clocks are recommended that the operating temperature be -40°C~85°C.When operating, electronic time clocks are possible to make sure that Alarm, Leap Year, Watchdog Timer remains constant in the process.Transmitter lines with 8 terminations exhibit the characteristic impedance of the terminating RTC module.This RTC real time clock's supply voltage is 2V.With 8 pins, it is equipped.There are a family named PCF8563 that consarets of the RTCs .This component can be found in Timer or RTC.Ensure that the output frequency does not exceed 0.032MHz.In order for it to be powered, it requires a power supply of 2/5V. PCF8563T/F4,112 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2/5V power supplies PCF8563T/F4,112 ApplicationsThere are a lot of NXP USA Inc. PCF8563T/F4,112 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA8802UG/12KB/1,0 OverviewThis real time analog clock can be found in package 8-XFBGA, WLCSP.A Bulk package is used to package time clock.In this electrical RTC, the supply voltage is 1.6V~5.5V.This electrical real time clock belongs to the Binary Counter category.This part is mounted on the systemboard in Surface Mount mode.Ideally, the operating temperature should be set to -40°C~85°C.When operating, electronic time clocks would be possible to ensure that the value Square Wave Output, Unique ID are maintained.This electronic component receives a voltage of 3V.RTCs are a member of the family PCA8802.As soon as the maximum supply voltage (Vsup) of 5.5V is reached, the circuit is off.Vsup (supply voltage) should remain above 1.6V.Additionally, it has the property of SEATED HGT_NOM; TERM PITCH-MAX. PCA8802UG/12KB/1,0 Features8-XFBGA, WLCSP package PCA8802UG/12KB/1,0 ApplicationsThere are a lot of NXP USA Inc. PCA8802UG/12KB/1,0 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2127AT/1,512 OverviewThis can be found in the package 20-SOIC (0.295, 7.50mm Width).The package is in the form of Tube.A voltage of 1.8V~4.2V is required for the supply of this electrical RTC.This electrical real time clock has the type Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted.Temperatures should be kept at -40°C~85°C at all times for safe operation.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM, TCXO/Crystal, Watchdog Timer are maintained at all times.A total of 20 pins are included in this product.PCF2127 are the family name of RTCs .This electrical digital time clock is powered by a voltage that is 1.8V~4.2V at the time of installation.The RTC times within the system have a memory of 512B available for storing data and programs for the purposes of the system. PCF2127AT/1,512 Features20-SOIC (0.295, 7.50mm Width) package 20 pin count PCF2127AT/1,512 ApplicationsThere are a lot of NXP USA Inc. PCF2127AT/1,512 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2129AT/1,512 OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, real time clocks is embedded as a dependency.As you can see, time clock is packaged as if time clock were in the form of Tube.This electrical RTC is powered by a voltage that is 1.8V~4.2V at the time of installation.Electrical real time clock type Clock/Calendar.In this case, Surface Mount is the way this part is mounted on the systemboard.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.Operating with Alarm, Leap Year, Square Wave Output, TCXO/Crystal, Watchdog Timer are possible.A transmission line can have a 20 termination by terminating it with a RTC module whose characteristic impedance matches the line's.The board is equipped with a total of 20 pins.There are only one family in which RTCs belongs, and that are PCF2129.Its supply voltage is 1.8V~4.2V.The content of Timers or RTCs includes this component.For the purpose of powering the real time clock, the power supply is set to 2/4V. PCF2129AT/1,512 Features20-SOIC (0.295, 7.50mm Width) package 20 terminations 20 pin count 2/4V power supplies PCF2129AT/1,512 ApplicationsThere are a lot of NXP USA Inc. PCF2129AT/1,512 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA8565BS/1,118 OverviewIn the package 10-VFDFN Exposed Pad, you will find real time clocks, and you will be able to install real time clocks.As of Tape & Reel (TR), time clock is packaged in this way.This electrical RTC is powered by a voltage that is 1.8V~5.5V at the time of installation.An electrical real time clock of type Clock/Calendar can be said to be this one.Surface Mount is the way this real time clock (RTC) is mounted.Temperature should be set at -40°C~125°C.When running a program, electronic time clocks may be possible to ensure that Alarm, Leap Year, Square Wave Output, Watchdog Timer are maintained at all times.In the case of 10 terminations, transmission lines have the characteristic impedance of the terminating RTC module.In this RTC real time clock, there is a voltage of 2V supplied to it.With 10 pins, it is equipped with the necessary functions.This object belongs to the family PCA8565.The output frequency should not exceed 0.032MHz.Following an input signal, there are 1 timers that output a signal at a preset time. PCA8565BS/1,118 Features10-VFDFN Exposed Pad package 10 terminations 10 pin count PCA8565BS/1,118 ApplicationsThere are a lot of NXP USA Inc. PCA8565BS/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940MT-I/STVAO OverviewThere is a package called 8-TSSOP (0.173, 4.40mm Width) which contains real time clocks, and you can find real time clocks there.As a result, time clock is packaged in the same way as Tape & Reel (TR).Unless otherwise stated, this electrical RTC's supply voltage is 1.8V~5.5V.The electrical real time clock belongs to the type Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted.As far as the operating temperature are concerned, electronic time clocks should be -40°C~85°C.When operating, you can ensure Alarm, Leap Year, Square Wave Output, SRAM.8 terminations result in transmission lines having the characteristic impedance of a RTC module terminating them.A voltage of 2.5V is applied to this electronic component.The RTC times embed a memory of 64B available for storing programs and data.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.It is a type of real time clock belonging to the Automotive, AEC-Q100 series. MCP7940MT-I/STVAO Features8-TSSOP (0.173, 4.40mm Width) package 8 terminations Automotive, AEC-Q100 series MCP7940MT-I/STVAO ApplicationsThere are a lot of Microchip Technology MCP7940MT-I/STVAO Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF2129AT/1,518 OverviewIn package 20-SOIC (0.295, 7.50mm Width), real time clocks is located.Tape & Reel (TR) is the way time clock is packaged.Unless otherwise stated, this electrical RTC's supply voltage is 1.8V~4.2V.It is a Clock/Calendar type electrical real time clock.A part of this electronic RTC module is mounted in the way of Surface Mount.-40°C~85°C should be the operating temperature.If Alarm, Leap Year, Square Wave Output, TCXO/Crystal, Watchdog Timer is ensured during operation, then there is no problem.A transmission line with 20 terminations possesses the characteristic impedance of the RTC module terminating it.A total of 20 pins are equipped with the RTCs.RTCs are a member of the family PCF2129.A voltage of 1.8V~4.2V is supplied to this electrical digital time clock.Under the Timers or RTCs subcategory, the RTCs belongs.A total of 2/4V power supplies are required to operate it. PCF2129AT/1,518 Features20-SOIC (0.295, 7.50mm Width) package 20 terminations 20 pin count 2/4V power supplies PCF2129AT/1,518 ApplicationsThere are a lot of NXP USA Inc. PCF2129AT/1,518 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8583BS,518 OverviewYou can find real time clocks in package 20-VQFN Exposed Pad among the other packages that are available.Time clock is packaged in the manner of Tape & Reel (TR).Its supply voltage is 2.5V~6V.An electrical real time clock of this type is called a Clock/Calendar.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.During operation, the value of Alarm, NVSRAM, Square Wave Output can be ensured.There are 20 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.In the case of this RTC real time clock, there is 5V voltage supplied to it.A total of 20 pins are included in this product.RTCs are a member of the family PCF8583.In the subcategory of Timer or RTC, the RTCs can be found.A memory of 240B can be used to store data and programs.0.1MHz should be the maximum output frequency.The power supply is 3/5V.Furthermore, TIMEKEEPING CURRENT = 10UA; AUTO WORD INCREMENTING are its characteristics. PCF8583BS,518 Features20-VQFN Exposed Pad package 20 terminations 20 pin count 3/5V power supplies PCF8583BS,518 ApplicationsThere are a lot of NXP USA Inc. PCF8583BS,518 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940MT-I/MNY OverviewA package named 8-WFDFN Exposed Pad contains real time clocks.As you can see, time clock is packaged as if time clock were in the form of Tape & Reel (TR).Its supply voltage is 1.8V~5.5V.An electrical real time clock of type Clock/Calendar can be said to be this one.This real time clock (RTC) is mounted in the way of Surface Mount.In order to be safe, electronic time clocks are imperative that the temperature are kept at -40°C~85°C at all times.Alarm, Leap Year, Square Wave Output, SRAM can be ensured when operating.When a transmission line is terminated with 8 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.Obviously, a voltage of 2.5V is being supplied to this electronic component.This object belongs to the family MCP7940M.Timer or RTC includes this part.For powering the real time clock, a power supply with a voltage of 2/5V is used.The real time clock is equipped with 8 pins.1 timers are used in this system. They output a signal after an input signal is received at a predetermined time. MCP7940MT-I/MNY Features8-WFDFN Exposed Pad package 8 terminations 2/5V power supplies MCP7940MT-I/MNY ApplicationsThere are a lot of Microchip Technology MCP7940MT-I/MNY Real Time Clocks applications.
|
5815
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W21-I/ST OverviewYou can find real time clocks in package 14-TSSOP (0.173, 4.40mm Width) among the other packages that are available.In this case, time clock is packaged in the way of Tube.As far as the supply voltage for this electrical RTC is concerned, it is 1.8V~3.6V.This electrical real time clock has the type Clock/Calendar.This part is mounted on the systemboard in the way indicated by Surface Mount.The temperature should always be kept at -40°C~85°C to ensure safe operation.Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer can be ensured when operating.Transmission lines with 14 terminations have the characteristic impedance of their termination RTC modules.5V is the supply voltage of this RTC real time clock.It is equipped with 14 pins.MCP795W21 is the family name of this object.This electrical digital time clock has a 1.3V~3.6V supply voltage.Timer or RTC includes this part.A memory of 64B is embedded in the RTC times, which can be used to store programs and data.10MHz should be the maximum output frequency.A Surface Mount mounting type is assigned to the RTC module.As a power supply for the real time clock, a value of 2/5V is used.With 14 pins, it is equipped.It is also characterized by ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ.8 Bits make up this digital time clock. MCP795W21-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W21-I/ST ApplicationsThere are a lot of Microchip Technology MCP795W21-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79410T-I/MS OverviewA package named 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains real time clocks.Tape & Reel (TR) is the way time clock is packaged.The supply voltage of this electrical RTC is 1.8V~5.5V.The type of this electrical real time clock is Clock/Calendar.The position of this real time clock (RTC) on the system board is indicated by Surface Mount.Ideally, the operating temperature should be set to -40°C~85°C.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM, Unique ID are maintained.It is possible to terminate a transmission line with a RTC module that matches the characteristic impedance of the line, which is known as 8 termination.Obviously, a voltage of 5V is being supplied to this electronic component.Due to its 8 pins, it has the necessary features.MCP79410 are a family of objects that belongs to RTCs .It is important to keep in mind that the supply voltage of this electrical digital time clock is 1.3V~5.5V.Timers or RTCs is the subcategory in which the RTCs belongs.It should be noted that the RTC times embed a memory of 64B 1Kb which is usable for storing programs and data as well.0.4MHz should be the maximum output frequency.It is mounted in the way of Surface Mount.The power supply is 2/5V.A total of 8 pins are equipped with the real time clock. MCP79410T-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79410T-I/MS ApplicationsThere are a lot of Microchip Technology MCP79410T-I/MS Real Time Clocks applications.
|
8724
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79400T-I/SN OverviewThere is an embedded version in the package 8-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.This electrical RTC has a supply voltage of 1.8V~5.5V.Electrical real time clocks of this type are Clock/Calendar.There is an real time clock (RTC) mounted in the way of Surface Mount.Temperature should be set at -40°C~85°C.Electronic time clocks are possible to make sure that Alarm, Leap Year, Square Wave Output, SRAM, Unique ID are maintained when operating.The 8 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.RTC real time clocks like this have a 2.5V supply voltage.A total of 8 pins are included in this product.MCP79400 are the family name of RTCs .This electrical digital time clock's supply voltage is 1.3V~5.5V.A component such as this is included in the contents of Timer or RTC.A frequency of 0.4MHz should not be exceeded by real time clocks' output frequency.This RTC module is mounted using type Surface Mount.There are 2/5V power supplies attached to it.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. When an input signal is received, 1 timers are used to output a signal at a preset time. MCP79400T-I/SN Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79400T-I/SN ApplicationsThere are a lot of Microchip Technology MCP79400T-I/SN Real Time Clocks applications.
|
62
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79410T-I/MNY OverviewA package named 8-WFDFN Exposed Pad contains real time clocks.As a result, time clock is packaged in the same way as Tape & Reel (TR).There is 1.8V~5.5V supply voltage for this electrical RTC.Clock/Calendar is the type of this electrical real time clock.Here, Surface Mount represents how this part is mounted.A temperature of -40°C~85°C should be used for operation.Electronic time clocks are possible to make sure that Alarm, Leap Year, Square Wave Output, SRAM, Unique ID are maintained when operating.Transmission lines with 8 terminations have the characteristic impedance of their termination RTC modules.This RTC real time clock's supply voltage is 5V.The RTCs are equipped with the necessary features due to its 8 pins.There are a family MCP79410 associated wit h thare object.This electrical digital time clock is powered by 1.3V~5.5V voltage.It falls under the subcategory of Timers or RTCs.A memory of 64B 1Kb is embedded in the RTC times, which can be used to store programs and data.The output frequency of this real time analog clock should not exceed 0.4MHz Hz.This RTC module is mounted using type Surface Mount.For the purpose of powering the real time clock, the power supply is set to 2/5V.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. MCP79410T-I/MNY Features8-WFDFN Exposed Pad package 8 terminations 8 pin count 2/5V power supplies MCP79410T-I/MNY ApplicationsThere are a lot of Microchip Technology MCP79410T-I/MNY Real Time Clocks applications.
|
9288
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
