Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | LMP7702MM/NOPB OverviewPackaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 220μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The linear amplifier is packaged by using a TR axis. To run supply current of buffer amplifier under 1.7mA. Buffer op amp series numbers are indicated by the LMP?. LMP7702MM/NOPB Features8 Pins supply voltage of 5V 130dB voltage gain Output Type: Rail-to-Rail LMP7702MM/NOPB ApplicationsThere are a lot of Texas Instruments LMP7702MM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
17148
In-stock
|
Get Quote | ||||
Ultralife |
9477
In-stock
|
Get Quote | ||||
Ultralife | OPA132UA/2K5 OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 4mA and 10 . Keeping the voltage gain at 120dB is the best course of action. The op amp is rated for an operating supply voltage of 1. The linear amplifier is packaged by using a TR axis. OPA132UA/2K5 Features8 Pins supply voltage of 15V 120dB voltage gain OPA132UA/2K5 ApplicationsThere are a lot of Texas Instruments OPA132UA/2K5 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMP8601QMAX/NOPB OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Current Sense-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 3.3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 150μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 1.1mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 26.06dB at all times. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. An buffer amplifier is packed in a TR-shape according to the design. The Automotive, AEC-Q100, LMP? represents the op amp's series number. 590kOhm should be the range of resistance for the instrumentation amplifier. LMP8601QMAX/NOPB Features8 Pins supply voltage of 3.3V 26.06dB voltage gain Resistance of 590kOhm LMP8601QMAX/NOPB ApplicationsThere are a lot of Texas Instruments LMP8601QMAX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LF444CN/NOPB OverviewIn order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called J-FET-types. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 14. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 10mV. The mounting type that is recommended for this electrical part is Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . This op amp can operate from a supply current at 600μA. Voltage gain should remain at 100dB. Op amp ic has 4 channels. This buffer amplifier is assigned within the BI-FET? series by its manufacturer. LF444CN/NOPB Features14 Pins supply voltage of 15V 100dB voltage gain LF444CN/NOPB ApplicationsThere are a lot of Texas Instruments LF444CN/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMH6624MAX/NOPB OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 2.5V. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 100μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 12mA, this op amp ic can operate. The voltage gain should stay at 81dB. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 9V voltage. As a result of this, the buffer amplifier is packed in TR. LMH6624MAX/NOPB Features8 Pins supply voltage of 2.5V 81dB voltage gain LMH6624MAX/NOPB ApplicationsThere are a lot of Texas Instruments LMH6624MAX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLE2142AIDR OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . The buffer amplifier is capable of operating from a supply current of 6.9mA . You should keep the voltage gain at 106.85dB for the time being. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 22V. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the Excalibur?. TLE2142AIDR Features8 Pins supply voltage of 15V 106.85dB voltage gain TLE2142AIDR ApplicationsThere are a lot of Texas Instruments TLE2142AIDR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
37782
In-stock
|
Get Quote | ||||
Ultralife | THS4521IDGKT OverviewIn the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp ic rates 2mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 1.14mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 119dB is the best course of action. Instrumentation amplifier has 1 channels on it. One of the many benefits of this op amp ic is that it emits Differential, Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. For packing the buffer amplifier, the TR-axis is adopted. THS4521IDGKT Features8 Pins supply voltage of 3.3V 119dB voltage gain Output Type: Differential, Rail-to-Rail THS4521IDGKT ApplicationsThere are a lot of Texas Instruments THS4521IDGKT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | INA333AIDRGR OverviewIt is packaged in an 8-WFDFN Exposed Pad-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Instrumentation-type. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 50μA supply current, this operational amplifier ics can be operated. The buffer amp consists of 1 circuits in total. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There is an operating supply voltage rating of 3 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR. As a result, linear amplifier's quiescent current is 50μA. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. It is important that the linear amplifier resistance stays within the range of 100GOhm. INA333AIDRGR Features8 Pins supply voltage of 5V Output Type: Rail-to-Rail Resistance of 100GOhm INA333AIDRGR ApplicationsThere are a lot of Texas Instruments INA333AIDRGR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLV2372ID OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Op amp ic rates 4.5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 750μA can be used to operate this linear amplifier. The voltage gain should stay at 110dB. There are 2 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. TLV2372ID Features8 Pins supply voltage of 5V 110dB voltage gain Output Type: Rail-to-Rail TLV2372ID ApplicationsThere are a lot of Texas Instruments TLV2372ID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | INA152EA/250 OverviewThere is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Differential-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 10V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. The input offset voltage is 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. A supply current of 500μA can be used to operate this linear amplifier. It is a member of the 0dB's 0dB family. The buffer amp consists of 1 circuits in total. 2 channels are available on the instrumentation amplifier. This linear amplifier pack is based on the TR axis. There is a quiescent current of 500μA in this operational amplifier circuit. It is important that the linear amplifier resistance stays within the range of 80kOhm. INA152EA/250 Features8 Pins supply voltage of 10V 0dB voltage gain Resistance of 80kOhm INA152EA/250 ApplicationsThere are a lot of Texas Instruments INA152EA/250 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DescriptionThe INA333AIDGKR is a precision instrumentation amplifier with minimal power and high accuracy. It's perfect for a wide range of portable applications thanks to its adaptable 3-operational amplifier design, small size, and low power. Any gain between 1 and 1000 can be set with a single external resistor. The G = 1 + (100 k? / RG) gain equation is used in the construction of the INA333AIDGKR. The INA333AIDGKR has a low offset voltage (25 μV, G ≥ 100), good offset voltage drift (0.1 μV/°C, G ≥ 100), and robust common-mode rejection (100 dB at G ≥ 10). It can run on as little as 1.8 V (±0.9 V) and has a quiescent current of only 50 μA, making it excellent for battery-powered devices. The INA333AIDGKR device has a very low noise density (50 nV/√Hz) that extends down to DC and uses autocalibration techniques to assure outstanding precision throughout an extensive industrial temperature range. The INA333AIDGKR is available in both 8-pin VSSOP and WSON surface-mount packages, with a temperature range of TA = –40°C to +125°C. Features? Low Quiescent Current: 50 μA ? Operating Temperature: –40°C to +125°C ? RFI Filtered Inputs ? 8-Pin VSSOP and 8-Pin WSON Packages ? High CMRR: 100 dB (Minimum), G ≥ 10 ? Low Input Bias Current: 200 pA (Maximum) ? Supply Range: 1.8 V to 5.5 V ? Input Voltage: (V–) +0.1 V to (V+) –0.1 V ? Output Range: (V–) +0.05 V to (V+) –0.05 V ? Low Offset Voltage: 25 μV (Maximum), G ≥ 100 ? Low Drift: 0.1 μV/°C, G ≥ 100 ? Low Noise: 50 nV/√Hz, G ≥ 100 Applications? Thermocouple Amplifiers ? RTD Sensor Amplifiers ? Data Acquisition ? Medical Instrumentation ? Portable Instrumentation ? Weigh Scales ? Bridge Amplifiers ? ECG Amplifiers ? Pressure Sensors |
999
In-stock
|
Get Quote | |||
Ultralife | LM6134BIMX/NOPB OverviewThere is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. In total, there are 14 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 6mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. You should keep the voltage gain at 100dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier consists of 4 different elements in total. An buffer amplifier is packed in a TR-shape according to the design. As a result, it is recommended that a power supply of 390μA be used with this electronic part. LM6134BIMX/NOPB Features14 Pins supply voltage of 5V 100dB voltage gain Output Type: Rail-to-Rail LM6134BIMX/NOPB ApplicationsThere are a lot of Texas Instruments LM6134BIMX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA2333AQDRQ1 OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Zero-Drift-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 17μA and 10 . It is recommended to keep the voltage gain at 130dB at all times. On the output type, there are Rail-to-Rail different types of op amps. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. For the packing of the instrumentation amplifier, TR is adopted. As the name implies, Automotive, AEC-Q100 refers to the series of the buffer op amp. OPA2333AQDRQ1 Features8 Pins supply voltage of 5V 130dB voltage gain Output Type: Rail-to-Rail OPA2333AQDRQ1 ApplicationsThere are a lot of Texas Instruments OPA2333AQDRQ1 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
10
In-stock
|
Get Quote | ||||
Ultralife |
312
In-stock
|
Get Quote | ||||
Ultralife |
8438
In-stock
|
Get Quote | ||||
Ultralife |
18169
In-stock
|
Get Quote | ||||
Ultralife | LM6142BIMX/NOPB OverviewIn the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 750μA. 108.63dB should be the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 2 elements. For packing the buffer amplifier, the TR-axis is adopted. LM6142BIMX/NOPB Features8 Pins supply voltage of 2.7V 108.63dB voltage gain Output Type: Rail-to-Rail LM6142BIMX/NOPB ApplicationsThere are a lot of Texas Instruments LM6142BIMX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA2336EA/250 OverviewPackaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. The input offset voltage is 500μV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Voltage gain should remain at 115dB. There are a total of 2 channels available on the op amps. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The instrumentation amplifier is packed in the form of TR. As a result, it is recommended that a power supply of 20μA be used with this electronic part. Instrumentation amplifiers are numbered by their MicroAmplifier? series. OPA2336EA/250 Features8 Pins supply voltage of 5V 115dB voltage gain Output Type: Rail-to-Rail OPA2336EA/250 ApplicationsThere are a lot of Texas Instruments OPA2336EA/250 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
2098
In-stock
|
Get Quote | ||||
Ultralife | LT1014DMDW OverviewThere is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 16 terminations. In this case, there are 16 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 16 pins. Op amp rates 200μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . As long as the supply current of the chip does not exceed 350μA, this op amp ic can operate. 120dB should remain the voltage gain. Op amp ic has 4 channels. The operating supply voltage of the buffer op amp is rated at 22V. LT1014DMDW Features16 Pins supply voltage of 15V 120dB voltage gain LT1014DMDW ApplicationsThere are a lot of Texas Instruments LT1014DMDW Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMH6504MA/NOPB OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Variable Gain type. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. The op amp ic has an array of 8 pins on it. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 11mA. 1 channels are available on the instrumentation amplifier. The linear amplifier consists of 1 different elements in total. Instrumentation amplifiers are numbered by their LMH? series. It is important that the linear amplifier resistance stays within the range of 7MOhm. The buffer op amp also uses a ANALOG CIRCUIT analog IC. LMH6504MA/NOPB Features8 Pins supply voltage of 5V Resistance of 7MOhm LMH6504MA/NOPB ApplicationsThere are a lot of Texas Instruments LMH6504MA/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | PGA281AIPW OverviewPackaging for the buffer amplifier is in the form of a 16-TSSOP (0.173, 4.40mm Width) case. This is a Programmable Gain type op amp. A Tube case is used to deliver the buffer op amp. There have been a total of 16 terminations over the past year. There are a total of 16 pins on this op amp. This particular linear amplifier is a type of Instrumentation Amplifier device, to be precise. It has 16 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 5μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~140°C . As long as the supply current of the chip does not exceed 2.4mA, this op amp ic can operate. This op amp contains 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. As a result, linear amplifier's quiescent current is 3mA. PGA281AIPW Features16 Pins Output Type: Rail-to-Rail PGA281AIPW ApplicationsThere are a lot of Texas Instruments PGA281AIPW Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMH6517SQ/NOPB OverviewThere is a 32-WFQFN Exposed Pad case package that contains the instrumentation amplifiers. Op amps are Variable Gain types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 32 terminations. The pins on this board total to 32 in total. An 32-pin op amp ic is included in the package. Op amp ic rates 25mV for input offset voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 80mA, this op amp ic can operate. It is recommended to keep the voltage gain at 22dB at all times. As one of the many benefits of this buffer amplifier, it puts out Differential signals, which is one of the many benefits it offers. 2 elements make up the design of this buffer amplifier. 220Ohm should be the range of resistance for the instrumentation amplifier. Using CONSUMER CIRCUIT, you can sort the electronic part based on the type of consumer IC that is included. LMH6517SQ/NOPB Features32 Pins 22dB voltage gain Output Type: Differential Resistance of 220Ohm LMH6517SQ/NOPB ApplicationsThere are a lot of Texas Instruments LMH6517SQ/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
1103
In-stock
|
Get Quote | ||||
Ultralife | LT1014CN OverviewThere is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 16 terminations. The pins on this board total to 14 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 60μV for this buffer op amp. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Operational amplifier can operate supply current at 350μA. There should be no change in the voltage gain at 120dB. The op amp ic has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 22V. LT1014CN Features14 Pins supply voltage of 15V 120dB voltage gain LT1014CN ApplicationsThere are a lot of Texas Instruments LT1014CN Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Kraft Tool Co |
52920
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.