Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartSolar Cells(36184)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | OPA350UA OverviewIn the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 150μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 5.2mA. The voltage gain should stay at 122dB. The op amp ic has 1 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Instrumentation amplifiers are numbered by their MicroAmplifier? series. OPA350UA Features8 Pins supply voltage of 5V 122dB voltage gain Output Type: Rail-to-Rail OPA350UA ApplicationsThere are a lot of Texas Instruments OPA350UA Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | <h3>AMC1301DWVR Description</h3><p><br/></p><p>The <strong>AMC1301DWVR</strong> is a precision, isolated amplifier with an isolation barrier that is highly resistant to magnetic interference between the output and the input circuitry. According to VDE V 0884-10 and UL1577, this barrier is certified to provide reinforced galvanic isolation of up to 7 kVPEAK. This device prevents noise currents on a high common-mode voltage line from entering the local ground and interfering with or destroying sensitive equipment when used in conjunction with an isolated power supply. The AMC1301DWVR's input is designed to connect directly to shunt resistors or other low-voltage signal sources. The device's high performance enables accurate current management, resulting in system-level power savings and lower torque ripple, particularly in motor control applications. The <strong>AMC1301DWVR</strong>'s inherent common-mode overvoltage and missing high-side supply voltage detection functions make system design and debugging easier. The AMC1301DWVR is available in a wide-body 8-pin SOIC (DWV) package and is fully specified for the extended industrial temperature range of –40°C to +125°C.</p><p><br/></p><p><br/></p><h3>AMC1301DWVR Features</h3><p><br/></p><ul class="list-paddingleft-2" style="list-style-type: disc;"><li><p>Fixed Gain: 8.2</p></li><li><p>System-Level Diagnostic Features</p></li><li><p>3.3-V Operation on High-Side and Low-Side</p></li><li><p>Low Offset Error and Drift: ±200 μV at 25°C, ± 3 μV/°C</p></li><li><p>±250-mV Input Voltage Range Optimized for Current Measurement Using Shunt Resistors</p></li></ul><p><br/></p><p><br/></p><h3>AMC1301DWVR Applications</h3><p><br/></p><ul class="list-paddingleft-2" style="list-style-type: disc;"><li><p>Isolated Voltage Sensing</p></li><li><p>Shunt-Resistor-Based Current Sensing In:</p></li></ul><p> – Motor Drives</p><p> – Frequency Inverters</p><p> – Uninterruptible Power Supplies</p><p><br/></p> |
2000
In-stock
|
Get Quote | |||
| Ultralife | THS4531AID OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Differential-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 100μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 250μA can be used to operate this linear amplifier. It is a member of the 114dB's 114dB family. The op amp ic has 1 channels on it. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages. THS4531AID Features8 Pins supply voltage of 2.7V 114dB voltage gain Output Type: Differential, Rail-to-Rail THS4531AID ApplicationsThere are a lot of Texas Instruments THS4531AID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LMC6484AIM/NOPB OverviewThere is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, op amp rates 750μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 2.6mA . 116.47dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. LMC6484AIM/NOPB Features14 Pins supply voltage of 5V 116.47dB voltage gain Output Type: Rail-to-Rail LMC6484AIM/NOPB ApplicationsThere are a lot of Texas Instruments LMC6484AIM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
113
In-stock
|
Get Quote | ||||
| Ultralife |
3571
In-stock
|
Get Quote | ||||
| Ultralife | TLE2072ID OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are J-FET types of amplifier on the chip. The op amp is delivered to you in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 3.1mA . It is recommended to keep the voltage gain at 106dB at all times. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 19V. In this case, Excalibur? represents the instrumentation amplifiers' series number. TLE2072ID Features8 Pins supply voltage of 5V 106dB voltage gain TLE2072ID ApplicationsThere are a lot of Texas Instruments TLE2072ID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LMH6552SD/NOPB OverviewThere is a 8-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. A Current Feedback-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 2.5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 16.5mV voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 22.5mA . It is a member of the 0dB's 0dB family. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 9V voltage. TR is adopted to pack the instrumentation amplifier. LMH?, PowerWise? corresponds to the op amp's series. 15Ohm should be the range of resistance for the linear amplifier. LMH6552SD/NOPB Features8 Pins supply voltage of 2.5V 0dB voltage gain Output Type: Differential Resistance of 15Ohm LMH6552SD/NOPB ApplicationsThere are a lot of Texas Instruments LMH6552SD/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | INA122U/2K5 OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Instrumentation-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. You should keep the voltage gain at 80dB for the time being. This op amp contains 1 circuits. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TR is adopted. 60μA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 10GOhm range, the op amp should be tested. INA122U/2K5 Features8 Pins supply voltage of 15V 80dB voltage gain Resistance of 10GOhm INA122U/2K5 ApplicationsThere are a lot of Texas Instruments INA122U/2K5 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | THS4524IDBTR OverviewThere is a 38-TFSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Differential-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. Linear amplifier has a total of 38 pins. Please take in mind that this instrumentation amplifier should be run at 3.3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 38 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 240μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 1.14mA volt supply current is needed for this linear amplifier to operate. Maintain 119dB as the voltage gain. A linear amplifier like this has 4 circuits on it. Buffer amplifier produces Differential, Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TR axis. In total, there are 1 op amps on the device. THS4524IDBTR Features38 Pins supply voltage of 3.3V 119dB voltage gain Output Type: Differential, Rail-to-Rail THS4524IDBTR ApplicationsThere are a lot of Texas Instruments THS4524IDBTR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
27588
In-stock
|
Get Quote | ||||
| Ultralife | OPA1632D OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Audio-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Op amp ic rates 3mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 14mA . 78dB should be the voltage gain. In addition to outputting Differential signals, this op amp ic offers a number of other advantages. There are 1 elements in this buffer amplifier. OPA1632D Features8 Pins supply voltage of 15V 78dB voltage gain Output Type: Differential OPA1632D ApplicationsThere are a lot of Texas Instruments OPA1632D Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM6171BIN/NOPB OverviewOp amp is packaged in 8-DIP (0.300, 7.62mm) case. An op amp ic of the Voltage Feedback type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 6mV. The mounting type that is recommended for this electrical part is Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits. There are a total of 1 channels available on the op amps. The VIP? III stands for the buffer op amp's serial number. LM6171BIN/NOPB Features8 Pins supply voltage of 5V 84dB voltage gain LM6171BIN/NOPB ApplicationsThere are a lot of Texas Instruments LM6171BIN/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | OPA211AIDR OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 30μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.6mA and 10 . There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 18V. As a result of this, the buffer amplifier is packed in TR. OPA211AIDR Features8 Pins supply voltage of 15V 114dB voltage gain Output Type: Rail-to-Rail OPA211AIDR ApplicationsThere are a lot of Texas Instruments OPA211AIDR Instrumentational OP Amps applications.
|
737
In-stock
|
Get Quote | |||
| Ultralife | OPA2188AID OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp ic rates 6μV for input offset voltage. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . An 415μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 136dB. On the buffer amps, there are 2 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 18V voltage. OPA2188AID Features8 Pins 136dB voltage gain Output Type: Rail-to-Rail OPA2188AID ApplicationsThere are a lot of Texas Instruments OPA2188AID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | THS4131IDGNR OverviewThe linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. An op amp ic of the Differential type. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 2mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 12.3mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 78dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 5V. A TR-shaped amplifier is used to pack the buffer amps. It is important to keep the resistance within the 34MOhm range of the op amps. THS4131IDGNR Features8 Pins supply voltage of 5V 78dB voltage gain Resistance of 34MOhm THS4131IDGNR ApplicationsThere are a lot of Texas Instruments THS4131IDGNR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | INA128UA/2K5 OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Instrumentation type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 125μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Keeping the voltage gain at 80dB is the best course of action. In total, there are 1 circuits on this buffer amplifier. TR is adopted to pack the instrumentation amplifier. The quiescent current is 700μA. 100GOhm should be the range of resistance for the linear amplifier. In total, there are 3 op amps on the device. INA128UA/2K5 Features8 Pins supply voltage of 15V 80dB voltage gain Resistance of 100GOhm INA128UA/2K5 ApplicationsThere are a lot of Texas Instruments INA128UA/2K5 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | THS4130IDGNR OverviewPackaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. There are two types of operational amplifiers in this circuit. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 2mV voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 12.3mA , this buffer op amp will be able to operate. The voltage gain should stay at 78dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 15V. An buffer amplifier is packed in a TR-shape according to the design. It is important to keep the resistance within the 34MOhm range of the op amps. THS4130IDGNR Features8 Pins supply voltage of 5V 78dB voltage gain Resistance of 34MOhm THS4130IDGNR ApplicationsThere are a lot of Texas Instruments THS4130IDGNR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | OPA857IRGTT OverviewPackaging for the buffer amplifier is in the form of a 16-VFQFN Exposed Pad case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 16 terminations over the past year. The total number of pins on linear amplifier is 16. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 16 pins on it. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 23.4mA can be used to operate this linear amplifier. This op amp contains 1 circuits. The linear amplifier is packaged by using a TR axis. OPA857IRGTT Features16 Pins supply voltage of 3.3V OPA857IRGTT ApplicationsThere are a lot of Texas Instruments OPA857IRGTT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
100
In-stock
|
Get Quote | ||||
| Ultralife | OPA340MDBVTEP OverviewThe linear amplifier is packaged in a SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 5. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . This op amp can operate from a supply current at 750μA. 124dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted. Instrumentation amplifiers are numbered by their MicroAmplifier? series. OPA340MDBVTEP Features5 Pins supply voltage of 5V 124dB voltage gain Output Type: Rail-to-Rail OPA340MDBVTEP ApplicationsThere are a lot of Texas Instruments OPA340MDBVTEP Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | INA132U/2K5 OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 160μA can be used to operate this linear amplifier. Voltage gain should remain at 0dB. On the buffer amps, there are 1 channels that can be used. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. There is a quiescent current of 160μA in this operational amplifier circuit. It is important that the linear amplifier resistance stays within the range of 80kOhm. An analog IC known as a ANALOG CIRCUIT is the other type of IC that is used in this op amp ic. It is important to note that this buffer op amp also has the following extra benefit: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY. INA132U/2K5 Features8 Pins supply voltage of 15V 0dB voltage gain Resistance of 80kOhm INA132U/2K5 ApplicationsThere are a lot of Texas Instruments INA132U/2K5 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | OPA365AMDBVTEP OverviewIn order to protect the op amps, a SC-74A, SOT-753 case is used. General Purpose-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 5. A total of 5 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 5 pins are available on the instrumentation amplifier. Op amp ic rates 200μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 4.6mA and 10 . It is recommended to keep the voltage gain at 120dB at all times. Op amp ic has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. It is used TR to pack the op amps. OPA365AMDBVTEP Features5 Pins supply voltage of 5V 120dB voltage gain Output Type: Rail-to-Rail OPA365AMDBVTEP ApplicationsThere are a lot of Texas Instruments OPA365AMDBVTEP Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | OPA140AIDR OverviewIt is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the J-FET-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 18V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 120μV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1.8mA . 126dB should be the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 18V voltage. An buffer amplifier is packed in a TR-shape according to the design. OPA140AIDR Features8 Pins supply voltage of 18V 126dB voltage gain Output Type: Rail-to-Rail OPA140AIDR ApplicationsThere are a lot of Texas Instruments OPA140AIDR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM6132BIMX/NOPB OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1.7V. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 390μA . Op amp is a member of the 100dB's 100dB family. Buffer op amp is equipped with 2 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This linear amplifier pack is based on the TR axis. LM6132BIMX/NOPB Features8 Pins supply voltage of 5V 100dB voltage gain Output Type: Rail-to-Rail LM6132BIMX/NOPB ApplicationsThere are a lot of Texas Instruments LM6132BIMX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
592
In-stock
|
Get Quote | ||||
| Ultralife |
27495
In-stock
|
Get Quote | ||||
| Ultralife | LMV932MA/NOPB OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. Op amp ic rates 1mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 116μA , this buffer op amp will be able to operate. The voltage gain should stay at 100dB. The op amp ic has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. LMV932MA/NOPB Features8 Pins supply voltage of 2.7V 100dB voltage gain Output Type: Rail-to-Rail LMV932MA/NOPB ApplicationsThere are a lot of Texas Instruments LMV932MA/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | OPA341NA/250 OverviewThe linear amplifier is packaged in a SOT-23-6 case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. Buffer amplifier has a total of 6 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 6 pins are located on the operational amplifiers. There is an input offset voltage of 6mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . A supply current of 750μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 120dB at all times. On the buffer amps, there are 1 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. To pack the operational amplifier ics, TR is adopted as the packing method. This buffer amplifier is assigned within the MicroAmplifier? series by its manufacturer. OPA341NA/250 Features6 Pins supply voltage of 5V 120dB voltage gain Output Type: Rail-to-Rail OPA341NA/250 ApplicationsThere are a lot of Texas Instruments OPA341NA/250 Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
13976
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
