Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | OPA694IDBVT OverviewThe linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. Op amps are Current Feedback types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 5 mark. The pins on this board total to 5 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 5-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 3mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.8mA and 10 . There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 12.6V. For packing the buffer amplifier, the TR-axis is adopted. OPA694IDBVT Features5 Pins supply voltage of 5V OPA694IDBVT ApplicationsThere are a lot of Texas Instruments OPA694IDBVT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP6V27-E/SN OverviewIn the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are Zero-Drift types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 2.3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Voltage gain should remain at 155dB. On the buffer amps, there are 2 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. It is recommended that this electronic component be used with an 620μA supply. MCP6V27-E/SN Features8 Pins supply voltage of 2.3V 155dB voltage gain Output Type: Rail-to-Rail MCP6V27-E/SN ApplicationsThere are a lot of Microchip Technology MCP6V27-E/SN Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMP8603MME/NOPB OverviewThe linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Current Sense type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are located on this board. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . An 1.1mA volt supply current is needed for this linear amplifier to operate. Maintain 40.04dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the LMP?. LMP8603MME/NOPB Features8 Pins 40.04dB voltage gain LMP8603MME/NOPB ApplicationsThere are a lot of Texas Instruments LMP8603MME/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
459
In-stock
|
Get Quote | ||||
Ultralife |
131148
In-stock
|
Get Quote | ||||
Ultralife | THS4031CDGNR OverviewA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Op amps are Voltage Feedback types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 2mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 8.5mA . It is recommended to keep the voltage gain at 95dB at all times. Op amp ic has 1 channels. This linear amplifier pack is based on the TR axis. THS4031CDGNR Features8 Pins supply voltage of 15V 95dB voltage gain THS4031CDGNR ApplicationsThere are a lot of Texas Instruments THS4031CDGNR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLE2141ACD OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 1mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 3.5mA can be used to operate this linear amplifier. Op amp is a member of the 106.85dB's 106.85dB family. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. Excalibur? corresponds to the op amp's series. TLE2141ACD Features8 Pins supply voltage of 15V 106.85dB voltage gain TLE2141ACD ApplicationsThere are a lot of Texas Instruments TLE2141ACD Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
9329
In-stock
|
Get Quote | ||||
Ultralife |
29552
In-stock
|
Get Quote | ||||
Ultralife | LME49720NA Description The LME49720NA/NOPB is a dual, high performance, high fidelity audio operational amplifier in 8 pin DIP package. This ultra low distortion, low noise, high slew rate operational amplifier is optimized and fully specified for high performance and high fidelity applications. Combining advanced leading edge process technology with state of the art circuit design, the LME49720 audio operational amplifier deliver superior audio signal amplification for outstanding audio performance. The LME49720 combines extremely low voltage noise density (2.7nV/√Hz) with low THD+N (0.00003%) to easily satisfy most demanding audio applications. This audio operational amplifier is unity gain stable and achieves outstanding AC performance while driving complex loads with values as high as 100pF. LME49720NA Features Easily Drives 600? Loads/Optimized for Superior Audio Signal Fidelity Output Short Circuit Protection PSRR and CMRR Exceed 120dB (typ) SOIC, PDIP, TO-99 Metal Can Packages LME49720NA Applications Ultra High Quality Audio Amplification High Fidelity Preamplifiers High Fidelity Multimedia State of the Art Phono Pre Amps High Performance Professional Audio High Fidelity Equalization and Crossover Networks High Performance Line Drivers High Performance Line Receivers High Fidelity Active Filters |
999
In-stock
|
Get Quote | |||
Ultralife |
7328
In-stock
|
Get Quote | ||||
Ultralife | OPA2376AID OverviewIn the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 2.2V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 25μV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 760μA volt supply current is needed for this linear amplifier to operate. Maintain 134dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Instrumentation amplifiers are numbered by their e-trim? series. OPA2376AID Features8 Pins supply voltage of 2.2V 134dB voltage gain Output Type: Rail-to-Rail OPA2376AID ApplicationsThere are a lot of Texas Instruments OPA2376AID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
40498
In-stock
|
Get Quote | ||||
APS | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
Ultralife | OPA2343UA OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 850μA. You should keep the voltage gain at 120dB for the time being. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 3V voltage. MicroAmplifier? corresponds to the op amp's series. OPA2343UA Features8 Pins supply voltage of 5V 120dB voltage gain Output Type: Rail-to-Rail OPA2343UA ApplicationsThere are a lot of Texas Instruments OPA2343UA Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA177GP OverviewThe linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 60μV. For this electronic part, it is recommended that you mount it with type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. An 1.3mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of instrumentation amplifier is rated 18V voltage. OPA177GP Features8 Pins supply voltage of 15V 135.56dB voltage gain OPA177GP ApplicationsThere are a lot of Texas Instruments OPA177GP Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLE2142CD OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. The input offset voltage is 1.9mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 6.9mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 106.85dB at all times. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. Excalibur? corresponds to linear amplifier's series. TLE2142CD Features8 Pins supply voltage of 15V 106.85dB voltage gain TLE2142CD ApplicationsThere are a lot of Texas Instruments TLE2142CD Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
301
In-stock
|
Get Quote | ||||
Ultralife | LM7301IM/NOPB OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 2.2V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. There is an input offset voltage of 8mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . There should be no change in the voltage gain at 97.03dB. As far as the device is concerned, buffer amplifier has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that you use an 720μA power supply with this electrical part in order for it to operate correctly. LM7301IM/NOPB Features8 Pins supply voltage of 2.2V 97.03dB voltage gain Output Type: Rail-to-Rail LM7301IM/NOPB ApplicationsThere are a lot of Texas Instruments LM7301IM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LM10CLN/NOPB OverviewA 8-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. In the case of Tube cases, linear amplifier will be delivered. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.25V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 4mV voltage. The mounting type that is recommended for this electrical part is Through Hole. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 280μA. Voltage gain should remain at 112.04dB. The buffer amp consists of 1 circuits in total. The buffer amplifier consists of 2 amplifiers. LM10CLN/NOPB Features8 Pins supply voltage of 3.25V 112.04dB voltage gain LM10CLN/NOPB ApplicationsThere are a lot of Texas Instruments LM10CLN/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMC6062IM/NOPB OverviewOp amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 1.3mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Maintain 132.04dB as the voltage gain. On this buffer amplifier, there are 2 circuits. There are 2 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. LMC6062IM/NOPB Features8 Pins supply voltage of 5V 132.04dB voltage gain Output Type: Rail-to-Rail LMC6062IM/NOPB ApplicationsThere are a lot of Texas Instruments LMC6062IM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLE2061MD OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 3.1mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . As long as the supply current of the chip does not exceed 290μA, this op amp ic can operate. There should be no change in the voltage gain at 93.06dB. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, TR is adopted as the packing method. Buffer op amp series numbers are indicated by the Excalibur?. TLE2061MD Features8 Pins supply voltage of 5V 93.06dB voltage gain TLE2061MD ApplicationsThere are a lot of Texas Instruments TLE2061MD Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA134PA DescriptionThe OPA134 series are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications. A true FET input stage is incorporated to provide superior sound quality and speed for exceptional audio performance. This, in combination with high output drive capability and excellent DC performance,allows for use in a wide variety of demanding applications. In addition, the OPA134 has a wide output swing, to within 1 V of the rails, allowing increased headroom and making it ideal for use in any audio circuit. The OPA134 SoundPlusTM audio operational amplifiers are easy to use and free from phase-inversion and the overload problems often found in common FET-input operational amplifiers. They can be operated from +2.5-V to +18-V power supplies. Input cascode circuitry provides excellent common-mode rejection and maintains low input bias current over its wide input voltage range, minimizing distortion. OPA134 series operational amplifiers are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions, including high load capacitance. The dual and quad versions feature completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded . OPA134PA Features
OPA134PA Applications
|
999
In-stock
|
Get Quote | |||
Ultralife | LMH6559MA/NOPB OverviewIt is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 3mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 10mA . 59.98dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 5V. LMH6559MA/NOPB Features8 Pins supply voltage of 5V 59.98dB voltage gain LMH6559MA/NOPB ApplicationsThere are a lot of Texas Instruments LMH6559MA/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | INA826AID OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a Instrumentation type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 8 pins are available on the instrumentation amplifier. Op amp rates 150μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 200μA. It is a member of the 60dB's 60dB family. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. 200μA quiescent currents are flowing through buffer op amp. Instrumentation amplifier resistance should stay within the range of 100kOhm. INA826AID Features8 Pins supply voltage of 15V 60dB voltage gain Output Type: Rail-to-Rail Resistance of 100kOhm INA826AID ApplicationsThere are a lot of Texas Instruments INA826AID Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
5752
In-stock
|
Get Quote | ||||
Ultralife | LMC6084IMX/NOPB OverviewIn the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 14. There are a total of 14 pins on this op amp. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are included on the operational amplifiers. Op amp rates 800μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 2.2mA . There should be no change in the voltage gain at 122.92dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is possible to count 4 elements on this buffer amplifier. A TR-shaped amplifier is used to pack the buffer amps. LMC6084IMX/NOPB Features14 Pins supply voltage of 5V 122.92dB voltage gain Output Type: Rail-to-Rail LMC6084IMX/NOPB ApplicationsThere are a lot of Texas Instruments LMC6084IMX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMH6505MM/NOPB OverviewThe linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Variable Gain type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Other Analog ICs op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 55mV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 11mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 80dB for the time being. There are a total of 1 channels available on the op amps. Op amp has total of 1 elements. The op amp resistance should stay within the range of 7MOhm. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC. LMH6505MM/NOPB Features8 Pins supply voltage of 5V 80dB voltage gain Resistance of 7MOhm LMH6505MM/NOPB ApplicationsThere are a lot of Texas Instruments LMH6505MM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
200
In-stock
|
Get Quote | ||||
Ultralife |
28697
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.