Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Klein Tools, Inc. | TS931BILT OverviewIn order to protect the op amps, a SC-74A, SOT-753 case is used. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. A total of 5 pins are located on this board. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 5-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~105°C. You can run this op amp ic on 20μA . 120dB should remain the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. It is possible to count 1 elements on this buffer amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL. TS931BILT Features5 Pins supply voltage of 3V 120dB voltage gain Output Type: Rail-to-Rail TS931BILT ApplicationsThere are a lot of STMicroelectronics TS931BILT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMC7101BIM5/NOPB OverviewThere is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 5 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 110μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 800μA . 110.63dB should be the voltage gain. Op amp ic has 1 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 12V. The instrumentation amplifier is packed in the form of TR. LMC7101BIM5/NOPB Features5 Pins supply voltage of 3V 110.63dB voltage gain Output Type: Rail-to-Rail LMC7101BIM5/NOPB ApplicationsThere are a lot of Texas Instruments LMC7101BIM5/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP6041T-E/OT OverviewThe linear amplifier is packaged in a SC-74A, SOT-753 case. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 5 terminations. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . 115dB should be the voltage gain. Op amp ic has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 600nA. MCP6041T-E/OT Features5 Pins supply voltage of 5V 115dB voltage gain Output Type: Rail-to-Rail MCP6041T-E/OT ApplicationsThere are a lot of Microchip Technology MCP6041T-E/OT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP6071T-E/OT OverviewThere is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 5 terminations this year. In this case, there are 5 pins on the board. I would like to remind you that this buffer op amp should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 5-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThere should be no change in the voltage gain at 115dB. Buffer op amp is equipped with 1 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is a recommendation that this electrical part be used with a supply with 110μA current rating. MCP6071T-E/OT Features5 Pins supply voltage of 3V 115dB voltage gain Output Type: Rail-to-Rail MCP6071T-E/OT ApplicationsThere are a lot of Microchip Technology MCP6071T-E/OT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LM318MX/NOPB OverviewIt is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 10mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. You can run this op amp ic on 5mA . Voltage gain should remain at 106.02dB. For the operating supply voltage of the op amp ic, there is a rating of 1. This linear amplifier pack is based on the TR axis. LM318MX/NOPB Features8 Pins supply voltage of 15V 106.02dB voltage gain LM318MX/NOPB ApplicationsThere are a lot of Texas Instruments LM318MX/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
10
In-stock
|
Get Quote | ||||
Ultralife | OPA2348AIDCNR Description OPA2348AIDCNR amplifiers have a single supply. OPA2348AIDCNR amp are low-power CMOS operational amplifiers. They have a wide bandwidth of 1MHz and the supply current is 45 uA. OPA2348AIDCNR IC is ideal for applications that require low power on a single supply. The low current of the supply, as well as the input current bias, is a perfect fit for low-power devices such as smoke detectors as well as other sensors with high impedance. OPA2348AIDCNR Features Low IQ: 45 μA (Typical) Rail-To-Rail Input and Output Single Supply: 2.1 V to 5.5 V Input Bias Current: 0.5 pA Excellent Bandwidth-to-Power Consumption Trade-off OPA2348AIDCNR Applications Portable Equipment Battery-Powered Equipment Smoke Alarms CO Detectors Medical Instrumentation |
999
In-stock
|
Get Quote | |||
Ultralife | OPA379AIDCKR OverviewThere is a 5-TSSOP, SC-70-5, SOT-353 case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. It consists of a total of 5 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. There are 5 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 2.9μA . There should be no change in the voltage gain at 120dB. The op amp ic has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For packing the buffer amplifier, the TR-axis is adopted. OPA379AIDCKR Features5 Pins supply voltage of 5V 120dB voltage gain Output Type: Rail-to-Rail OPA379AIDCKR ApplicationsThere are a lot of Texas Instruments OPA379AIDCKR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA1679IDR OverviewPackaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Audio-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThere are 4 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis. For optimal performance, this electrical part should be connected to a supply with a current of 2mA. This op amp ic is capable of conducting at least 199526.231 voltage gains. OPA1679IDR Featuressupply voltage of 15V Output Type: Rail-to-Rail OPA1679IDR ApplicationsThere are a lot of Texas Instruments OPA1679IDR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP6H01T-E/OT OverviewPackaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 5. The total number of pins on linear amplifier is 5. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 5 pins. Regarding input offset voltage, op amp rates 3.5mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . There should be no change in the voltage gain. This op amp contains 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 8V. MCP6H01T-E/OT Features5 Pins supply voltage of 5V 115dB voltage gain Output Type: Rail-to-Rail MCP6H01T-E/OT ApplicationsThere are a lot of Microchip Technology MCP6H01T-E/OT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LM833MM/NOPB OverviewThere is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Audio-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 5mA . 110dB should be the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 2. It is used TR to pack the op amps. LM833MM/NOPB Features8 Pins supply voltage of 15V 110dB voltage gain LM833MM/NOPB ApplicationsThere are a lot of Texas Instruments LM833MM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | TSH22IDT OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. An 2.15mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 100dB. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 15V. It is used TAPE AND REEL to pack the op amps. TSH22IDT Features8 Pins supply voltage of 15V 100dB voltage gain TSH22IDT ApplicationsThere are a lot of STMicroelectronics TSH22IDT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LPV358MM/NOPB OverviewIn the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Cut Tape (CT) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. Op amp rates 7mV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 15μA . Keeping the voltage gain at 100dB is the best course of action. There are a total of 2 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 3V voltage. An buffer amplifier is packed in a TR-shape according to the design. LPV358MM/NOPB Features8 Pins supply voltage of 5V 100dB voltage gain Output Type: Rail-to-Rail LPV358MM/NOPB ApplicationsThere are a lot of Texas Instruments LPV358MM/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. |
12559
In-stock
|
Get Quote | ||||
Ultralife | <h3>TLV274IDR Overview</h3><div><br/>The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. A Cut Tape (CT) case is used to deliver the buffer op amp. It is estimated that there will be 14 terminations in the next few months. The pins on this board total to 14 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 625μA . There should be no change in the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5V. A TR-shaped amplifier is used to pack the buffer amps. <br/><br/></div><h3>TLV274IDR Features</h3><div><br/>14 Pins<br/>supply voltage of 5V<br/>110dB voltage gain<br/>Output Type: Rail-to-Rail<br/><br/></div><h3>TLV274IDR Applications</h3><div><br/>There are a lot of Texas Instruments TLV274IDR Instrumentational OP Amps applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>High/low-pass filter circuit<!--<li--></li><li>Active probe<!--<li--></li><li>Signal transformation<!--<li--></li><li>Professional videography<!--<li--></li><li>Multiplication circuits <!--<li--></li><li>Differentiator circuits<!--<li--></li><li>Non-polarized electrodes<!--<li--></li><li>Proportional operation circuits<!--<li--></li><li>Cinema or auditorium audio system<!--<li--></li><li>Logarithmic operation circuits <!--<li--></li></ul> |
2500
In-stock
|
Get Quote | |||
Ultralife | LMC7111BIM5X/NOPB OverviewThere is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 5. A total of 5 pins are located on this board. Please take in mind that op amp should be run at 2.7V. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are located on the operational amplifiers. There is an input offset voltage of 900μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 25μA . There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted. LMC7111BIM5X/NOPB Features5 Pins supply voltage of 2.7V 113.98dB voltage gain Output Type: Rail-to-Rail LMC7111BIM5X/NOPB ApplicationsThere are a lot of Texas Instruments LMC7111BIM5X/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TLV9064IPWR OverviewIt is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the CMOS type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C TA , which is a good operating temperature. A linear amplifier like this has 4 circuits on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To run supply current of buffer amplifier under 538μA. TLV9064IPWR Featuressupply voltage of 5V Output Type: Rail-to-Rail TLV9064IPWR ApplicationsThere are a lot of Texas Instruments TLV9064IPWR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP6441T-E/LT OverviewThe linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 5. It consists of a total of 5 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 5 pins. There is an input offset voltage of 4.5mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou should keep the voltage gain at 110dB for the time being. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. In order to ensure optimal performance, an 450nA supply is recommended for this electrical component. MCP6441T-E/LT Features5 Pins supply voltage of 5V 110dB voltage gain Output Type: Rail-to-Rail MCP6441T-E/LT ApplicationsThere are a lot of Microchip Technology MCP6441T-E/LT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LMV821M5X/NOPB OverviewOp amp is packaged in SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 5-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 3.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 300μA can be used to operate this linear amplifier. The voltage gain should stay at 105dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are a total of 1 elements in this linear amplifier. For packing the buffer amplifier, the TR-axis is adopted. LMV821M5X/NOPB Features5 Pins supply voltage of 2.7V 105dB voltage gain Output Type: Rail-to-Rail LMV821M5X/NOPB ApplicationsThere are a lot of Texas Instruments LMV821M5X/NOPB Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA171AIDBVR DescriptionOPA171AIDBVR is an Operational Amplifier from the manufacturer of ON Semiconductor with a supply voltage of 20V. The operating temperature of OPA171AIDBVR is -40°C~125°C and its output current is 25mA. OPA171AIDBVR has 5 pins and it is available in SC-74A, SOT-753 packaging way. The nominal Gain Bandwidth Product of OPA171AIDBVR is 3MHz and Power Supply Rejection Ratio (PSRR) is 120dB. OPA171AIDBVR Features
OPA171AIDBVR Applications
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | TL084CD OverviewThere is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 10mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 1.4mA. Op amp is a member of the 106.02dB's 106.02dB family. 4 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 18V. TL084CD Features14 Pins supply voltage of 15V 106.02dB voltage gain TL084CD ApplicationsThere are a lot of STMicroelectronics TL084CD Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | <h3>LMV931MGX/NOPB Overview</h3><div><br/>The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 116μA supply current, this operational amplifier ics can be operated. 113dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The instrumentation amplifier is packed in the form of TR. <br/><br/></div><h3>LMV931MGX/NOPB Features</h3><div><br/>5 Pins<br/>supply voltage of 2.7V<br/>113dB voltage gain<br/>Output Type: Rail-to-Rail<br/><br/></div><h3>LMV931MGX/NOPB Applications</h3><div><br/>There are a lot of Texas Instruments LMV931MGX/NOPB Instrumentational OP Amps applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Information processing<!--<li--></li><li>Video conversion and routing<!--<li--></li><li>Home audio systems<!--<li--></li><li>Strain gauges<!--<li--></li><li>Band-stop filter<!--<li--></li><li>Television broadcasting equipment<!--<li--></li><li>Multiplication circuits <!--<li--></li><li>Signal operation<!--<li--></li><li>Hand-held batteries<!--<li--></li><li>High/low-pass filter circuit<!--<li--></li></ul> |
3000
In-stock
|
Get Quote | |||
Ultralife |
12498
In-stock
|
Get Quote | ||||
Klein Tools, Inc. | TS954IPT OverviewA 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 6mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 950μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The op amp is rated for an operating supply voltage of 4. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. TS954IPT Features14 Pins supply voltage of 3V 86dB voltage gain Output Type: Rail-to-Rail TS954IPT ApplicationsThere are a lot of STMicroelectronics TS954IPT Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | OPA172IDBVR OverviewThe linear amplifier is packaged in a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. The total number of pins on linear amplifier is 5. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 5 pins. Op amp ic rates 200μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. Using an 1.6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 130dB is the best course of action. This op amp ic has 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis. OPA172IDBVR Features5 Pins 130dB voltage gain Output Type: Rail-to-Rail OPA172IDBVR ApplicationsThere are a lot of Texas Instruments OPA172IDBVR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | INA213BIDCKR OverviewThe linear amplifier is packaged in a 6-TSSOP, SC-88, SOT-363 case. Buffer amps of this type are called Current Sense-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 6 terminations this year. In total, there are 6 pins on this op amp ic. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 6 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 65μA . It is a member of the 33.98dB's 33.98dB family. The total number of elements in this buffer amplifier is 1. Buffer op amp series numbers are indicated by the Zero-Drift. INA213BIDCKR Features6 Pins 33.98dB voltage gain INA213BIDCKR ApplicationsThere are a lot of Texas Instruments INA213BIDCKR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
9511
In-stock
|
Get Quote | ||||
APS | MCP6042T-I/MS OverviewOp amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You should keep the voltage gain at 115dB for the time being. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 600nA. MCP6042T-I/MS Features8 Pins supply voltage of 5V 115dB voltage gain Output Type: Rail-to-Rail MCP6042T-I/MS ApplicationsThere are a lot of Microchip Technology MCP6042T-I/MS Instrumentational OP Amps applications.
|
1756
In-stock
|
Get Quote | |||
Ultralife |
62
In-stock
|
Get Quote | ||||
Ultralife | TLV4316IDR OverviewPackaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 14. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 14 pins. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. On this buffer amplifier, there are 4 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. In order to ensure optimal performance, an 400μA supply is recommended for this electrical component. TLV4316IDR Featuressupply voltage of 5V Output Type: Rail-to-Rail TLV4316IDR ApplicationsThere are a lot of Texas Instruments TLV4316IDR Instrumentational OP Amps applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.