Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
STMicroelectronics | L6258EX OverviewDrivers controllers includes a Tubepackage.The part is packaged in a PowerSO-36 Exposed Bottom Pad case.The part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.4.75V~5.25V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of 150°C TJdegrees Celsius.A motor of this type can be categorized as Brushed DC.In this part, there are 36 terminations available.Voltage can be applied at a rate of 12V~40V volts to the load.This amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.The output current should remain at 1.2A.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.L6258is the part number that finds it.36pins are available on the device.In the Motion Control Electronicsseries, it is included.A supply voltage of 40Vis required to operate this driver. L6258EX FeaturesApplications : General Purpose Load voltage across the chip 12V~40V base on L6258 number L6258EX ApplicationsThere are a lot of STMicroelectronics L6258EX motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6472PDTR OverviewThis package is designed to work with [0].Parts are packaged in 36-BSSOP (0.433, 11.00mm Width) Exposed Padcases.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.There is a possibility of providing 3.3V 5Vvolts through the device.Operation temperature ranges from -40°C~150°C TJ.This part offers 36terminations.Drivers controllers is possible to apply voltage at a rate of 8V~45Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 36Vsetting.Surface Mountis the recommended mounting method.The output current should be kept at 3A for the part.The device employs the STEPPER MOTOR CONTROLLER analog IC.Drivers controllers is based on the L6472 part number.36pins are used in its design.Drivers controllers belongs to Motion Control Electronics series.There are 1 outputs available.Drivers controllers is maintained at 45V volts.STSPIN L64 is the main series of the part.The characteristic of ALSO OPERATES AT 5 VOLTis also present. L6472PDTR FeaturesApplications : General Purpose Load voltage across the chip 8V~45V base on L6472 number designed with 1 outputs Additional Feature: ALSO OPERATES AT 5 VOLT L6472PDTR ApplicationsThere are a lot of STMicroelectronics L6472PDTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6235PD013TR OverviewThis package is designed to work with [0].Drivers controllers comes in a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.To mount the part by [0], it is recommended that you do so.In this case, it is appropriate for the component connected to General Purpose.In this case, the device can supply 12V~52V volts.In terms of operating temperature, it falls within the range -25°C~125°C TJ.In this case, the motor type is Brushless DC (BLDC).This part offers 36terminations.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 48V.Ensure that the part output current remains at 2.8A.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.Drivers controllers is based on the L6235 part number.There are 36 pins on it.Drivers controllers is a part of the Motion Control Electronics series.There are 1 outputs available.The driver is powered by a 52Vvolt supply.A constant voltage is maintained at 52V.There is STSPIN L62 change in the output voltage.This device has 3channels. L6235PD013TR FeaturesApplications : General Purpose Load voltage across the chip 12V~52V base on L6235 number designed with 1 outputs L6235PD013TR ApplicationsThere are a lot of STMicroelectronics L6235PD013TR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | <h3>DRV2605LDGSR Overview</h3><div><br/>The design includes a package of type [0].There is 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case included with the part.The part should be mounted by Surface Mount.For the component connected to [0], it is suitable.There is a capability for the device to provide 2V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There is a motor type ERM, LRAassociated with this motor type.In this part, there are 10 terminations available.The voltage can applied to the load at the rate of 2V~5.5V.Drivers controllers is important to note that this amplifier should be operated at the 3.6Vsetting.Its recommended mounting way is Surface Mount.A ANALOG CIRCUITanalog integrated circuit is employed in this device.The DRV2605part number is used to locate the part.10pins are available on the device.<br/><br/></div><h3>DRV2605LDGSR Features</h3><div><br/>Applications : Haptic Feedback<br/>Load voltage across the chip 2V~5.5V<br/>base on DRV2605 number<br/><br/></div><h3>DRV2605LDGSR Applications</h3><div><br/>There are a lot of Texas Instruments DRV2605LDGSR motor drivers applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>CHMSL (center high-mount stop lamps)<!--<li--></li><li>Outdoor area lights<!--<li--></li><li>High brightness LED lighting<!--<li--></li><li>LED bias<!--<li--></li><li>Industrial high-bay lights<!--<li--></li><li>Monitoring the energy that the luminaire uses<!--<li--></li><li>Digital still cameras<!--<li--></li><li>LCD displays<!--<li--></li><li>Home lighting systems<!--<li--></li><li>parking lights<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8873SPWPT OverviewThere is a Cut Tape (CT)package included in the design.There is 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case included with the part.Drivers controllers is recommended to mount the part by Surface Mount.I believe it would be suitable for the component connected to Industrial.There is a capability for the device to provide 0V~5.5V volts.This device operates at a temperature of -40°C~125°C TA.This motor type can be categorized as Brushed DC.This part offers 24terminations.The voltage can applied to the load at the rate of 4.5V~38V.You should run this amplifier at 13.5V.Maintain the current output of the part at 10A volts.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.As a result of the DRV8873part number, it can be found. DRV8873SPWPT FeaturesApplications : Industrial Load voltage across the chip 4.5V~38V base on DRV8873 number DRV8873SPWPT ApplicationsThere are a lot of Texas Instruments DRV8873SPWPT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6208QTR OverviewThis package is designed to work with [0].The part is packaged in a 48-VFQFN Exposed Pad case.A mounting position of Surface Mountis recommended for the part.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.A range of -25°C~125°C TJis available for operating temperature.There are 48 terminations available on this part.Drivers controllers is possible to apply voltage to the load at the rate of 8V~52V.I would like to remind you that this amplifier should be operated at 48V.Surface Mountis the recommended mounting method.The output current should be kept at 2.5A for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.L6208is the part number that finds it.In the Motion Control Electronicsseries, it is included.A total of 2outputs are available.Keeps the output voltage at STSPIN L62at all times.For optimal operation, its maximum output current reaches [0]. L6208QTR FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6208 number designed with 2 outputs L6208QTR ApplicationsThere are a lot of STMicroelectronics L6208QTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8823QDCARQ1 OverviewThe design includes a package of type [0].There is 48-TFSOP (0.240, 6.10mm Width) Exposed Pad case included with the part.A mounting position of Surface Mountis recommended for the part.This component is suitable for the component connected to Automotive.This device is capable of supplying voltages up to 8V~32V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. Drivers controllers is possible to classify the motor type as Brushed DC.There are 48 terminations available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is recommended that this amplifier be run at 24V.Its recommended mounting way is Surface Mount.Maintain a current of 1.5A for the part output.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.The part number DRV8823indicates that it is found.48 pins are provided for its design.Drivers controllers belongs to the Motion Control Electronics series.Drivers controllers is maintained at a voltage of Automotive, AEC-Q100. DRV8823QDCARQ1 FeaturesApplications : Automotive Load voltage across the chip 8V~32V base on DRV8823 number DRV8823QDCARQ1 ApplicationsThere are a lot of Texas Instruments DRV8823QDCARQ1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | VNH7040AYTR DescriptionThe device is a full-bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. All switches are designed using STMicroelectronics? well known and proven proprietary VIPower? M0 technology that allows to efficiently integrate on the same die as a true Power MOSFET with an intelligent signal/protection circuitry. VNH7040AYTR FeaturesAEC-Q100 qualified Output current: 35 A 3 V CMOS compatible inputs Undervoltage shutdown Overvoltage clamp Thermal shutdown Cross-conduction protection Current and power limitation Very low standby power consumption Protection against loss of ground and loss of VCC PWM operation up to 20 kHz |
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8353RHRGZT OverviewThe design includes a package of type [0].Parts are packaged in 48-VFQFN Exposed Padcases.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to Brushless DC (BLDC).There is a capability for the device to provide 6V~95V volts.With regard to operating temperature, it ranges -40°C~125°C TA. A Brushless DC (BLDC)motor can be classified as a type of motor.This part has 48termination options.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 10V.The output current should remain at 25mA.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Using the DRV8353part number, it is located. DRV8353RHRGZT FeaturesApplications : Brushless DC (BLDC) Load voltage across the chip 9V~75V base on DRV8353 number DRV8353RHRGZT ApplicationsThere are a lot of Texas Instruments DRV8353RHRGZT motor drivers applications.
|
6675
In-stock
|
Get Quote | |||
Texas Instruments | DRV8873SPWPRQ1 Description DRV8873SPWPRQ1 is an integrated driver IC for driving a brushed DC motor in automotive applications. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that drive motors bi-directionally with up to 10-A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V. A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half-bridge control is available to drive two solenoid loads. Integrated current sensing provides an output current proportional to the motor load current of both hide-side FETs without the need for high-power sense resistors. This can be used to detect motor stall or change in load conditions. DRV8873SPWPRQ1 Features AEC-Q100 qualified for automotive applications Device temperature grade 1: –40°C to +125°C, TA N-channel H-bridge motor driver Drives one bidirectional brushed DC motor Two unidirectional brushed DC motors Solenoids or other resistive and inductive loads 4.5-V to 38-V Operating voltage range 10-A Peak current drive Integrated current sensing Proportional current output (IPROPI) DRV8873SPWPRQ1 Applications ? Electronic throttle control ? Exhaust gas recirculation ? Side-view mirror tilt ? e-Shifter ? Air-flow diverter valve control |
4294
In-stock
|
Get Quote | |||
STMicroelectronics | L6225PD OverviewThe design includes a package of type [0].A 20-SOIC (0.433, 11.00mm Width) Exposed Padcase is included with the part.To mount the part by [0], it is recommended that you do so.As a result, it is appropriate for the component connected to General Purpose.A device with a voltage range of 8V~52V volts is available.With regard to operating temperature, it ranges -25°C~125°C TJ. Drivers controllers is possible to categorize the motor type as Brushed DC.There are 20 terminations available on this part.There is the option of applying the voltage to the load at the rate of 8V~52V.In order to get the best performance from this amplifier, it should be run at 48V.A Surface Mountmounting method is recommended for this product.Keep the part output current at 4A.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.The part number L6225indicates that it is found.A device with 20pins is available.Drivers controllers belongs to the Motion Control Electronics series.There are 4 outputs available.There is 48V supply voltage required for this driver.The output voltage is maintained at 52V.STSPIN L62 is the main series of the part.Drivers controllers is possible to recognize Brushedas the type of motor.As a result, the maximum output current reaches 2.8Ain order to meet the requirements of the operation.There are 2 channels on it. L6225PD FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6225 number designed with 4 outputs Motor Type classified as Brushed L6225PD ApplicationsThere are a lot of STMicroelectronics L6225PD motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6225PDTR OverviewThis package was designed with Tape & Reel (TR)in mind.A 20-SOIC (0.433, 11.00mm Width) Exposed Padcase is included with the part.Mounting the part by Surface Mountis recommended.The component connected in General Purposeis compatible with it.In this case, the device can supply 8V~52V volts.A range of -25°C~125°C TJis available for operating temperature.The motor type can be classified as Brushed DC.This part provides 20terminations.You can apply voltage at 8V~52Vto the load.Please take in mind that this amplifier should be run at 48V.Ideally, it should be mounted in the Surface Mountposition.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.The part number L6225indicates that it is found.In this device, there are 20 pins.Drivers controllers belongs to Motion Control Electronics series.Currently, there are 4 outputs available.There is 48V supply voltage required for this driver.STSPIN L62 is the main series of the part.In order to achieve the operation requirements, the maximal output current reaches [0]. L6225PDTR FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6225 number designed with 4 outputs L6225PDTR ApplicationsThere are a lot of STMicroelectronics L6225PDTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8353RSRGZR OverviewThe design contains a Tape & Reel (TR)package.This part is packed in a 48-VFQFN Exposed Pad case.To mount the part by [0], it is recommended that you do so.Drivers controllers is fDrivers controllersting for the component connected in Brushless DC (BLDC).This device is capable of supplying voltages up to 6V~95V volts.In terms of operating temperature, it falls within the range -40°C~125°C TA.There is a motor type Brushless DC (BLDC)associated with this motor type.The part has 48terminations available.The voltage can applied to the load at the rate of 9V~75V.Drivers controllers is important to note that this amplifier should be operated at the 10Vsetting.Ensure that the part output current remains at 25mA.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.According to the DRV8353part number, the part is found. DRV8353RSRGZR FeaturesApplications : Brushless DC (BLDC) Load voltage across the chip 9V~75V base on DRV8353 number DRV8353RSRGZR ApplicationsThere are a lot of Texas Instruments DRV8353RSRGZR motor drivers applications.
|
5818
In-stock
|
Get Quote | |||
STMicroelectronics | L6228D OverviewThis package is designed to work with [0].A 24-SOIC (0.295, 7.50mm Width)case is included with the part.The part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.There is a possibility of providing 8V~52Vvolts through the device.There is a temperature range of -25°C~125°C TJin which this device operates.The part supports 24terminations.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 48V.In terms of mounting, it is recommended that it be mounted in Surface Mount.This can be determined by looking at the L6228 part number.Drivers controllers is designed wDrivers controllersh 24 pins.Drivers controllers belongs to the Motion Control Electronics series.There are a total of 4outputs available.A voltage of 52Vis maintained at the output.In this case, the output voltage is kept at STSPIN L62 volts.A motor type of Steppercan be recognized.Controller ic operates wController ich a supply current of 1.4A. L6228D FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6228 number designed with 4 outputs Motor Type classified as Stepper L6228D ApplicationsThere are a lot of STMicroelectronics L6228D motor drivers applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC34932EK OverviewThis package is designed to work with [0].The part is packged with 54-SSOP (0.295, 7.50mm Width) Exposed Pad case.Mounting the part by Surface Mountis recommended.The component connected in DC Motors, General Purposematches it perfectly.The device is capable of supplying a voltage of 5V~36V volts.This device operates at a temperature range of -40°C~150°C TJ.In this case, the motor type is Brushed DC, DC Servo.The part supports 54terminations.Drivers controllers is possible to apply voltage at a rate of 5V~36Vto the load.The device utilizes the IC BRUSH DC MOTOR CONTROLLERwhich is an analog IC.Using the MC34932part number, it is located.Drivers controllers belongs to the series [0]. MC34932EK FeaturesApplications : DC Motors, General Purpose Load voltage across the chip 5V~36V base on MC34932 number MC34932EK ApplicationsThere are a lot of NXP USA Inc. MC34932EK motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6208D OverviewThe package contains [0].There is 24-SOIC (0.295, 7.50mm Width) case included with the part.In most cases, it is recommended to mount the part at Surface Mount.This component is suitable for the component connected to General Purpose.A device with a voltage range of 8V~52V volts is available.This device operates at a temperature range of -25°C~125°C TJ.This part provides 24terminations.You can apply voltage at 8V~52Vto the load.In order to get the best performance from this amplifier, it should be run at 48V.Surface Mountis the recommended mounting method.Using the L6208part number, it is located.24pins are available on the device.The Motion Control Electronicsseries includes this item.There are a total of 4outputs available.A supply voltage of 48V is required for the operation of this driver.In this case, the output voltage is maintained at 52V.STSPIN L62 is the main series of the part.Drivers controllers is possible to recognize the motor type as [0].Its maximum output current reaches 5.6Ato meet the operational requirements. L6208D FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6208 number designed with 4 outputs Motor Type classified as Stepper L6208D ApplicationsThere are a lot of STMicroelectronics L6208D motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV3205QPHPRQ1 OverviewThe design includes a package of type [0].48-PowerTQFPcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.I believe it would be suitable for the component connected to Automotive.The device is capable of supplying a voltage of 4V~40V volts.There is a temperature range of -40°C~150°C TJin which this device operates.Drivers controllers is possible to classify the motor type as Brushless DC (BLDC).This part has 48termination options.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Drivers controllers is based on the DRV3205 part number.48pins are present on the device.Automotive, AEC-Q100 is the main series of the part. DRV3205QPHPRQ1 FeaturesApplications : Automotive base on DRV3205 number DRV3205QPHPRQ1 ApplicationsThere are a lot of Texas Instruments DRV3205QPHPRQ1 motor drivers applications.
|
8336
In-stock
|
Get Quote | |||
Infineon Technologies | IRMCF312TY OverviewThere is a Traypackage included in the design.Drivers controllers is packaged wDrivers controllersh a 100-LQFP case.A mounting position of Surface Mountis recommended for the part.Fits the component connected to Appliance.The device can supply 1.62V~1.98V 3V~3.6V volts.With regard to operating temperature, it ranges -40°C~85°C TA. Motors can be classified as AC, Synchronous.Surface Mountis its recommended mounting method.According to the IRMCF312part number, the part is found.The device has 100 pins.Drivers controllers is possible to access 2outputs.The driver operates on a supply voltage of 3.3V volts.In this case, MCE?is maintained as the output voltage.The maximal operating temperature reaches 85°C.Controller ic is recommended to operate at a higher temperature than -40°C.An application with a maximum supply voltage of 3.6V can be made possible.With a minimum supply voltage of [0], the device can function. IRMCF312TY FeaturesApplications : Appliance base on IRMCF312 number designed with 2 outputs IRMCF312TY ApplicationsThere are a lot of Infineon Technologies IRMCF312TY motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8808DCAR OverviewThere is a Tape & Reel (TR)package included in the design.The part is packaged in a 48-TFSOP (0.240, 6.10mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device can supply 7V~40V volts.This device operates at a temperature range of 0°C~135°C TJ.A motor of this type can be categorized as Brushed DC.This part provides 48terminations.Drivers controllers is possible to apply voltage to the load at the rate of 18V~38V.Drivers controllers is important to note that this amplifier should be operated at the 27Vsetting.Its recommended mounting way is Surface Mount.Ensure that the part output current remains at 2.5A.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.DRV8808is the part number that finds it.A device with 48pins is available. DRV8808DCAR FeaturesApplications : General Purpose Load voltage across the chip 18V~38V base on DRV8808 number DRV8808DCAR ApplicationsThere are a lot of Texas Instruments DRV8808DCAR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC33931VWR2 OverviewThe design includes a package of type [0].There is 44-BSSOP (0.433, 11.00mm Width) Exposed Pad case included with the part.Surface Mountshould be used for mounting the part.As a result, it is appropriate for the component connected to Automotive.Drivers controllers is capable of supplying 5V~28V volts.A range of -40°C~125°C TAis available for operating temperature.Drivers controllers is possible to classify the motor type as Brushed DC.A total of 44terminations are available in the part.There is the option of applying the voltage to the load at the rate of 5V~28V.Drivers controllers is important to note that this amplifier should be operated at the 14Vsetting.Maintain the current output of the part at 5A volts.As a result of the MC33931part number, it can be found. MC33931VWR2 FeaturesApplications : Automotive Load voltage across the chip 5V~28V base on MC33931 number MC33931VWR2 ApplicationsThere are a lot of NXP USA Inc. MC33931VWR2 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV83055QPHPRQ1 OverviewDrivers controllers is designed with Tape & Reel (TR) package.Drivers controllers is packaged wDrivers controllersh a 48-PowerTQFP case.In most cases, it is recommended to mount the part at Surface Mount.In this case, it is appropriate for the component connected to Three-Phase BLDC, PMSM Motors.The device is capable of supplying a voltage of 4.4V~45V volts.In terms of operating temperature, it falls within the range -40°C~125°C TA.The part has 48terminations available.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The part number DRV8305indicates that it is found.48pins are used in its design.Automotive, AEC-Q100 is the main series of the part. DRV83055QPHPRQ1 FeaturesApplications : Three-Phase BLDC, PMSM Motors base on DRV8305 number DRV83055QPHPRQ1 ApplicationsThere are a lot of Texas Instruments DRV83055QPHPRQ1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | IRMCK099MTR OverviewThere is a Tape & Reel (TR)package included in the design.There is 32-WFQFN Exposed Pad case included with the part.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to Appliance.Drivers controllers is capable of supplying 3V~3.6V volts.In terms of operating temperature, it falls within the range -40°C~125°C TA.There is a motor type AC, Synchronousassociated with this motor type.There are 32 terminations available in the part.I would like to remind you that this amplifier should be operated at 3.3V.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.iMOTION?is maintained as the output voltage. IRMCK099MTR FeaturesApplications : Appliance IRMCK099MTR ApplicationsThere are a lot of Infineon Technologies IRMCK099MTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE4205G OverviewThe package contains [0].This part is packed in a 20-SOIC (0.295, 7.50mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to Automotive.A device with a voltage range of 6V~32V volts is available.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.The part has 20terminations available.There is the option of applying the voltage to the load at the rate of 6V~32V.Drivers controllers is recommended to keep the part output current at 1A.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.According to the TLE4205part number, the part is found.Drivers controllers belongs to Motion Control Electronics series. TLE4205G FeaturesApplications : Automotive Load voltage across the chip 6V~32V base on TLE4205 number TLE4205G ApplicationsThere are a lot of Infineon Technologies TLE4205G motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | TC647BEUA OverviewDrivers controllers is designed with Tube package.The part is packged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.Mounting the part by Surface Mountis recommended.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 3V~5.5V volts.This device operates at a temperature range of -40°C~85°C TA.A Brushless DC (BLDC)motor can be classified as a type of motor.The part supports 8terminations.Drivers controllers is important to remember that this amplifier should be run at 5V.Its recommended mounting way is Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.Based on the TC647part number, it is found.8pins are used in its design.The Motion Control Electronicsseries contains it.At [0], the output voltage is maintained.Continually maintains the output voltage at FanSense?.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.Featuring a 5mAoutput current, this device provides maximum design flexibility.Currently, there are 1 channels available.30Hzis the frequency that can be achieved. TC647BEUA FeaturesApplications : Fan Controller base on TC647 number Motor Type classified as Brushless DC (BLDC) TC647BEUA ApplicationsThere are a lot of Microchip Technology TC647BEUA motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | VNH5180A-E OverviewThis package was designed with Tubein mind.Drivers controllers comes in a 36-BFSOP (0.295, 7.50mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.Fits the component connected to Automotive.The device can supply 5.5V~18V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.Drivers controllers is possible to categorize the motor type as Brushed DC.There is the option of applying the voltage to the load at the rate of 5.5V~18V.There is Surface Mount recommended mounting method for this device.Keep the part output current at 8A.Based on the VNH5180part number, it is found.The device has 36 pins.There are a total of 1outputs available.ECOPACK?, VIPower? is the main series of the part. VNH5180A-E FeaturesApplications : Automotive Load voltage across the chip 5.5V~18V base on VNH5180 number designed with 1 outputs VNH5180A-E ApplicationsThere are a lot of STMicroelectronics VNH5180A-E motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | L293DNEE4 OverviewDrivers controllers is designed wDrivers controllersh a package of [0].This part is packed in a 16-DIP (0.300, 7.62mm) case.In most cases, it is recommended to mount the part at Through Hole.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.A device with a voltage range of 4.5V~36V volts is available.There is a temperature range of 0°C~70°C TAin which this device operates.A Brushed DCmotor can be classified as a type of motor.There are 16 terminations available in the part.Drivers controllers is possible to apply voltage at a rate of 4.5V~36Vto the load.The amplifier should be set to 5V.A Through Holemounting method is recommended for this product.The part number L293indicates that it is found.16pins are present on the device.The output voltage is maintained at 36V.In order to achieve the operation requirements, the maximal output current reaches [0].This device has 4drivers installed. L293DNEE4 FeaturesApplications : General Purpose Load voltage across the chip 4.5V~36V base on L293 number with 4 Drivers L293DNEE4 ApplicationsThere are a lot of Texas Instruments L293DNEE4 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | IRMCK099M OverviewThe design includes a package of type [0].There is 32-WFQFN Exposed Pad case included with the part.Ideally, the part should be mounted by Surface Mount.Fits the component connected to Appliance.The device can supply 3V~3.6V volts.In terms of operating temperature, it falls within the range -40°C~125°C TA.There is a motor type AC, Synchronousassociated with this motor type.This part has 32termination options.Drivers controllers is important to remember that this amplifier should be run at 3.3V.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.In this case, the output voltage is kept at iMOTION? volts. IRMCK099M FeaturesApplications : Appliance IRMCK099M ApplicationsThere are a lot of Infineon Technologies IRMCK099M motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6227PD OverviewThe package is designed with [0].This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 8V~52V volts.A range of -25°C~125°C TJis available for operating temperature.A Brushed DCmotor can be classified as a type of motor.There are 36 terminations available in the part.A voltage of 8V~52Vcan be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 48V.The recommended mounting method is Surface Mount.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.Based on the L6227part number, it is found.36pins are used in its design.Drivers controllers is a part of the Motion Control Electronics series.4outputs are available in total.A supply voltage of 48V is required for the operation of this driver.In this case, the output voltage is maintained at 52V.In this case, STSPIN L62is maintained as the output voltage.The motor type can be identified as Brushed.For the purposes of meeting its operation requirements, the maximum output current reaches [0]. L6227PD FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6227 number designed with 4 outputs Motor Type classified as Brushed L6227PD ApplicationsThere are a lot of STMicroelectronics L6227PD motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | IM513L6AXKMA1 OverviewThe package is designed with [0].A 24-PowerDIP Modulecase is included with the part.In general, it is recommended that the part be mounted by Through Hole.I believe it would be suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 13.5V~18.5V volts.The operating temperature ranges from -40°C~125°Cto -40°C~125°C.There are 24 terminations available in the part.Drivers controllers is recommended that this amplifier be run at 15V.Set the part's output current to 10A.A AC MOTOR CONTROLLERanalog integrated circuit is employed in this device.CIPOS?is maintained as the output voltage. IM513L6AXKMA1 FeaturesApplications : General Purpose IM513L6AXKMA1 ApplicationsThere are a lot of Infineon Technologies IM513L6AXKMA1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | IM231M6T2BAKMA1 OverviewThe package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 23-DIP Module (0.573, 14.55mm) case.Drivers controllers is recommended that the part be mounted by Through Hole.Drivers controllers is fDrivers controllersting for the component connected in Fan Motor Driver.The device is capable of supplying a voltage of 13.5V~16.5V volts.Operation temperature ranges from -40°C~150°C TJ.There is the option of applying the voltage to the load at the rate of 450V.Keep the part output current at 4A.A AC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Continually maintains the output voltage at CIPOS? IPM. IM231M6T2BAKMA1 FeaturesApplications : Fan Motor Driver Load voltage across the chip 450V IM231M6T2BAKMA1 ApplicationsThere are a lot of Infineon Technologies IM231M6T2BAKMA1 motor drivers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.