Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | DRV8323SRTAT OverviewThis package was designed with Tape & Reel (TR)in mind.The part is packaged in a 40-WFQFN Exposed Pad case.Drivers controllers is recommended that the part be mounted by Surface Mount.The component connected in Brushless DC (BLDC)matches it perfectly.This device is capable of supplying voltages up to 6V~60V volts.A range of -40°C~125°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).The part has 40terminations available.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.Maintain the current output of the part at 5mA volts.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.DRV8323is the part number that finds it.40pins are used in its design. DRV8323SRTAT FeaturesApplications : Brushless DC (BLDC) base on DRV8323 number DRV8323SRTAT ApplicationsThere are a lot of Texas Instruments DRV8323SRTAT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8846RGER OverviewThe design contains a Tape & Reel (TR)package.There is 24-VFQFN Exposed Pad case included with the part.In most cases, it is recommended to mount the part at Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in DC Motors, General Purpose, Stepper Motors.There is a capability for the device to provide 4V~18V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 4V~18V.The recommended mounting method is Surface Mount.Based on the DRV8846part number, it is found.24pins are available on the device.The driver operates on a supply voltage of 18V volts. DRV8846RGER FeaturesApplications : DC Motors, General Purpose, Stepper Motors Load voltage across the chip 4V~18V base on DRV8846 number DRV8846RGER ApplicationsThere are a lot of Texas Instruments DRV8846RGER motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8850RGYR OverviewDrivers controllers is designed wDrivers controllersh a package of [0].This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 2V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in this part.You can apply voltage at 2V~5.5Vto the load.Please take in mind that this amplifier should be run at 4.2V.There is Surface Mount recommended mounting method for this device.The DRV8850part number is used to locate the part.24pins are present on the device.The Motion Control Electronicsseries contains it.There are 1 outputs available.In order to meet operation requirements, its maximum output current reaches [0].The supply current used for its operating is 2.9mA.This frequency can be achieved at 50kHz. DRV8850RGYR FeaturesApplications : DC Motors, General Purpose, Solenoids Load voltage across the chip 2V~5.5V base on DRV8850 number designed with 1 outputs DRV8850RGYR ApplicationsThere are a lot of Texas Instruments DRV8850RGYR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8320HRTVT OverviewThe package contains [0].This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.The component connected in Brushless DC (BLDC)matches it perfectly.The device can supply 6V~60V volts.A range of -40°C~125°C TAis available for operating temperature.Drivers controllers is possible to classify the motor type as Brushless DC (BLDC).A total of 32terminations are available in the part.This amplifier should be operated at 24V.Keep the part output current at 5mA.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.This can be determined by looking at the DRV8320 part number.The device has 32 pins. DRV8320HRTVT FeaturesApplications : Brushless DC (BLDC) base on DRV8320 number DRV8320HRTVT ApplicationsThere are a lot of Texas Instruments DRV8320HRTVT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE62086GXUMA2 OverviewDrivers controllers is designed with Tape & Reel (TR) package.The part is packaged in a 28-SOIC (0.295, 7.50mm Width) case.To mount the part by [0], it is recommended that you do so.I believe it would be suitable for the component connected to General Purpose.There is a capability for the device to provide 4.75V~5.5V volts.This device operates at a temperature of -40°C~150°C TJ.A motor of this type can be categorized as Brushed DC.This part has 28termination options.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 5V.Ideally, it should be mounted in the Surface Mountposition.Maintain the current output of the part at 600mA volts.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.28pins are used in its design.Drivers controllers is possible to access 6outputs.A voltage of 40V is used as the supply voltage for this driver.Continually maintains the output voltage at SPT?. TLE62086GXUMA2 FeaturesApplications : General Purpose Load voltage across the chip 5.5V~40V designed with 6 outputs TLE62086GXUMA2 ApplicationsThere are a lot of Infineon Technologies TLE62086GXUMA2 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6506 OverviewThe design includes a package of type [0].A 18-DIP (0.300, 7.62mm)case is included with the part.A mounting position of Through Holeis recommended for the part.As a result, it is appropriate for the component connected to General Purpose.In this case, the device can supply 4.5V~7V volts.This device operates at a temperature range of 0°C~125°C TA.This part offers 18terminations.Please take in mind that this amplifier should be run at 5V.There is Through Hole recommended mounting method for this device.L6506is the part number that finds it.There are 18 pins on it.Drivers controllers is a part of the Motion Control Electronics series.Drivers controllers operates from a voltage of 5V volts.Continually maintains the output voltage at 3.5V.As a result, we can recognize that the motor type is Stepper.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 2.75mAoutput current.Its maximal output current reaches 2.75mA to meet the operation requirements.A total of 4channels are available.The device is equipped with 1 drivers. L6506 FeaturesApplications : General Purpose base on L6506 number Motor Type classified as Stepper with 1 Drivers L6506 ApplicationsThere are a lot of STMicroelectronics L6506 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8307RHAT OverviewThere is a Tape & Reel (TR)package included in the design.The part is packged with 40-VFQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.For the component connected to [0], it is suitable.8.5V~32V volts can be supplied by the device.Regarding the operating temperature, it is in the range of -40°C~125°C TA°C.The motor type can be classified as Brushless DC (BLDC).This part offers 40terminations.There is Surface Mount recommended mounting method for this device.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.The DRV8307part number is used to locate the part.40pins are available on the device.There are 1 outputs available.Drivers controllers is maintained at 5V volts.Drivers controllers offers maximum design flexibilDrivers controllersy since Drivers controllerss output current is 300mA.This device operates on 12mAsupply current.Controller ic is possible to reach a frequency of 50MHz. DRV8307RHAT FeaturesApplications : General Purpose base on DRV8307 number designed with 1 outputs DRV8307RHAT ApplicationsThere are a lot of Texas Instruments DRV8307RHAT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8871DDA Description
DRV8871 equipment is a brushed DC motor driver suitable for printers, household appliances, industrial equipment and other small machines. Two logic inputs control the Hbridge driver, which consists of four N-channel MOSFET, which can control the motor in both directions and the peak current is up to 3.6 Mel A. By selecting the current attenuation mode, the input can be PWM to control the speed of the motor. Setting both inputs to low will enter low power hibernation mode. DRV8871 devices have advanced current regulation circuits that do not use analog reference voltage sources or external detection resistors. This novel solution uses a standard low-cost, low-power resistor to set the current threshold. The ability to limit current to a known level can significantly reduce the system power requirements and volume capacitance required to maintain a stable voltage, especially under motor start-up and stall conditions.
DRV8871DDA Features? H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads ? Wide 6.5-V to 45-V Operating Voltage ? 565-mΩ Typical RDS(on) (HS + LS) ? 3.6-A Peak Current Drive ? PWM Control Interface ? Current Regulation Without a Sense Resistor ? Low-Power Sleep Mode ? Small Package and Footprint – 8-Pin HSOP With PowerPAD? – 4.9 × 6 mm ? Integrated Protection Features – VM Undervoltage Lockout (UVLO) – Overcurrent Protection (OCP) – Thermal Shutdown (TSD) – Automatic Fault Recovery
DRV8871DDA Applications? Printers ? Appliances ? Industrial Equipment ? Other Mechatronic Applications
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8803PWP OverviewDrivers controllers includes a Tubepackage.The part is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) case.Surface Mountshould be used for mounting the part.For the component connected to [0], it is suitable.The device can supply 8.2V~60V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There is a motor type Brushed DCavailable.A total of 16terminations are available in the part.The voltage can applied to the load at the rate of 8.2V~60V.You should run this amplifier at 24V.The recommended way to mount it is Surface Mount.Keep the part output current at 1A.This can be determined by looking at the DRV8803 part number.There are 16 pins on it.Drivers controllers is possible to access 4outputs.Stepperrepresents the motor type.Controller ic uses 1.6mAas the supply current for Controller ics operation. DRV8803PWP FeaturesApplications : General Purpose Load voltage across the chip 8.2V~60V base on DRV8803 number designed with 4 outputs Motor Type classified as Stepper DRV8803PWP ApplicationsThere are a lot of Texas Instruments DRV8803PWP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8805PWP OverviewThere is a Tubepackage included in the design.The part is packged with 16-PowerTSSOP (0.173, 4.40mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a capability for the device to provide 8.2V~60V volts.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.A Brushed DCmotor can be classified as a type of motor.There are 16 terminations available in the part.In this case, the voltage can be applied to the load at the rate of 8.2V~60V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.The recommended way to mount it is Surface Mount.Ensure that the part output current remains at 1A.The part number DRV8805indicates that it is found.Drivers controllers is designed wDrivers controllersh 16 pins.The Motion Control Electronicsseries includes this item.There are 4 outputs available.A voltage of 60Vis maintained at the output.Drivers controllers is possible to recognize Stepperas the type of motor. DRV8805PWP FeaturesApplications : General Purpose Load voltage across the chip 8.2V~60V base on DRV8805 number designed with 4 outputs Motor Type classified as Stepper DRV8805PWP ApplicationsThere are a lot of Texas Instruments DRV8805PWP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L9958 OverviewThe design includes a package of type [0].20-SOIC (0.433, 11.00mm Width) Exposed Padcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposematches it perfectly.There is a capability for the device to provide 4.5V~5.5V volts.This device operates at a temperature of -40°C~150°C TJ.A Brushed DCmotor can be classified as a type of motor.There are 20 terminations available in the part.The voltage can applied to the load at the rate of 4V~28V.The recommended mounting method is Surface Mount.Maintain the current output of the part at 8.6A volts.The L9958part number allows us to locate it.There are 20 pins on it.The number of outputs available is [0].A constant voltage is maintained at 300mV. L9958 FeaturesApplications : General Purpose Load voltage across the chip 4V~28V base on L9958 number designed with 2 outputs L9958 ApplicationsThere are a lot of STMicroelectronics L9958 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6227Q OverviewDrivers controllers is designed wDrivers controllersh a package of [0].There is 32-VFQFN Exposed Pad case included with the part.Ideally, the part should be mounted by Surface Mount.Fits the component connected to General Purpose.A device with a voltage range of 8V~52V volts is available.Drivers controllers operates wDrivers controllershin a range of -25°C~125°C TJdegrees Celsius.A Brushed DCmotor can be classified as a type of motor.A total of 32terminations are available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.You should run this amplifier at 48V.There is Surface Mount recommended mounting method for this device.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.Based on the L6227part number, it is found.A device with 32pins is available.The Motion Control Electronicsseries includes this item.There are 4 outputs available.52Vis maintained as the output voltage.There is STSPIN L62 change in the output voltage.Its maximal output current reaches 2.8A to meet the operation requirements.In this case, the frequency is 100kHz.The device is equipped with 2 drivers. L6227Q FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6227 number designed with 4 outputs with 2 Drivers L6227Q ApplicationsThere are a lot of STMicroelectronics L6227Q motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | E-L6258EX OverviewThe package is designed with [0].The part is packaged in a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposematches it perfectly.There is a capability for the device to provide 4.75V~5.25V volts.This device operates at a temperature of 150°C TJ.Drivers controllers is possible to categorize the motor type as Brushed DC.This part offers 36terminations.The voltage can applied to the load at the rate of 12V~40V.In order to get the best performance from this amplifier, it should be run at 5V.A Surface Mountmounting method is recommended for this product.The L6258part number allows us to locate it.36 pins are provided for its design.Drivers controllers belongs to the series [0].The motor type can be recognized as Stepper. E-L6258EX FeaturesApplications : General Purpose Load voltage across the chip 12V~40V base on L6258 number Motor Type classified as Stepper E-L6258EX ApplicationsThere are a lot of STMicroelectronics E-L6258EX motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8313PWP OverviewThe design includes a package of type [0].There is 28-PowerTSSOP (0.173, 4.40mm Width) case included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.In this case, the device can supply 8V~60V volts.This device operates at a temperature range of -40°C~150°C TJ.In this case, the motor type is Brushless DC (BLDC).There are 28 terminations available on this part.There is the option of applying the voltage to the load at the rate of 8V~60V.You should run this amplifier at 24V.Surface Mountis its recommended mounting method.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.The DRV8313part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 28 pins.The Motion Control Electronicsseries contains it.3outputs are available.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.With a 1.75A output current, it offers the greatest degree of design flexibility.Controller ic is powered by 5mAsupply current. DRV8313PWP FeaturesApplications : General Purpose Load voltage across the chip 8V~60V base on DRV8313 number designed with 3 outputs Motor Type classified as Brushless DC (BLDC) DRV8313PWP ApplicationsThere are a lot of Texas Instruments DRV8313PWP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8350RHRGZT OverviewThe design contains a Tape & Reel (TR)package.Drivers controllers is packaged wDrivers controllersh a 48-VFQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to Brushless DC (BLDC).6V~95V volts can be supplied by the device.Operation temperature ranges from -40°C~125°C TA.There is a motor type Brushless DC (BLDC)available.This part provides 48terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to note that this amplifier should be operated at the 10Vsetting.Ensure that the part output current remains at 25mA.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.The part number DRV8350indicates that it is found. DRV8350RHRGZT FeaturesApplications : Brushless DC (BLDC) Load voltage across the chip 9V~75V base on DRV8350 number DRV8350RHRGZT ApplicationsThere are a lot of Texas Instruments DRV8350RHRGZT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6506D OverviewThere is a Tubepackage included in the design.There is 20-SOIC (0.295, 7.50mm Width) case included with the part.In most cases, it is recommended to mount the part at Surface Mount.Fits the component connected to General Purpose.A device with a voltage range of 4.5V~7V volts is available.In terms of operating temperature, it falls within the range 0°C~125°C TA.This part provides 20terminations.Drivers controllers is important to remember that this amplifier should be run at 5V.Surface Mountis the recommended mounting method.This can be determined by looking at the L6506 part number.20pins are available on the device.Drivers controllers belongs to Motion Control Electronics series.The driver operates from a supply voltage of 5V volts.A constant voltage is maintained at 3.5V.The motor type can be identified as Stepper.With a 2.75mA output current, it offers maximal design flexibility.For optimal operation, its maximum output current reaches [0].On this device, there are 4channels. L6506D FeaturesApplications : General Purpose base on L6506 number Motor Type classified as Stepper L6506D ApplicationsThere are a lot of STMicroelectronics L6506D motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8802PWPR OverviewThe design contains a Cut Tape (CT)package.Parts are packaged in 28-PowerTSSOP (0.173, 4.40mm Width)cases.The part should be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.There is a capability for the device to provide 8.2V~45V volts.A range of -40°C~150°C TJis available for operating temperature.In this case, the motor type is Brushed DC.The part has 28terminations available.Drivers controllers is possible to apply voltage at a rate of 8.2V~45Vto the load.Drivers controllers is important to remember that this amplifier should be run at 24V.Surface Mountis its recommended mounting method.Set the part's output current to 1.1A.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.Using the DRV8802part number, it is located.There are 28 pins on it.Drivers controllers is part of the series [0]. DRV8802PWPR FeaturesApplications : General Purpose Load voltage across the chip 8.2V~45V base on DRV8802 number DRV8802PWPR ApplicationsThere are a lot of Texas Instruments DRV8802PWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8302DCA OverviewThis package was designed with Tubein mind.Parts are packaged in 56-TFSOP (0.240, 6.10mm Width) Exposed Padcases.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.Drivers controllers is capable of supplying 8V~60V volts.This device operates at a temperature of -40°C~125°C TA.There is a motor type Brushless DC (BLDC)available.There are 56 terminations available on this part.The recommended mounting method is Surface Mount.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Based on the DRV8302part number, it is found.56 pins are provided for its design.The item belongs to the Motion Control Electronics series.The number of outputs available is [0].The motor type can be identified as Brushless DC (BLDC).As it has an output current of [0], it provides maximum flexibility in design. DRV8302DCA FeaturesApplications : General Purpose base on DRV8302 number designed with 1 outputs Motor Type classified as Brushless DC (BLDC) DRV8302DCA ApplicationsThere are a lot of Texas Instruments DRV8302DCA motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV2605YZFT OverviewThis package was designed with Tape & Reel (TR)in mind.This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.This component is suitable for the component connected to Haptic Feedback.A device with a voltage range of 2.5V~5.5V volts is available.There is a temperature range of -40°C~150°C TJin which this device operates.This motor type can be categorized as ERM, LRA.In this part, there are 9 terminations available.The voltage can applied to the load at the rate of 2.5V~5.5V.I would like to remind you that this amplifier should be operated at 3.6V.Ideally, it should be mounted in the Surface Mountposition.The device employs the BRUSH DC MOTOR CONTROLLER analog IC.Based on the DRV2605part number, it is found.9pins are present on the device.Drivers controllers is possible to access 1outputs.In this case, 5.5Vis maintained as the output voltage.600μAis the supply current used for its operation. DRV2605YZFT FeaturesApplications : Haptic Feedback Load voltage across the chip 2.5V~5.5V base on DRV2605 number designed with 1 outputs DRV2605YZFT ApplicationsThere are a lot of Texas Instruments DRV2605YZFT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MTS62C19A-HS105 OverviewDrivers controllers is designed with Tube package.A 24-BFSOP (0.295, 7.50mm Width)case is included with the part.In general, it is recommended that the part be mounted by Surface Mount.In this case, it is appropriate for the component connected to Automotive.Drivers controllers is capable of supplying 4.5V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.A motor of this type can be categorized as Brushed DC.This part offers 24terminations.The voltage can applied to the load at the rate of 10V~40V.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The output current should be kept at 550mA for the part.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.This can be determined by looking at the MTS62C19A part number.A device with 24pins is available.Drivers controllers belongs to the series [0].A supply voltage of 30V is required for the operation of this driver.At [0], the output voltage is maintained.Also, ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40Vcan be found as a characteristic of this type.Currently, there are 2 channels available. MTS62C19A-HS105 FeaturesApplications : Automotive Load voltage across the chip 10V~40V base on MTS62C19A number Additional Feature: ALSO REQUIRED LOAD SUPPLY VOLTAGE OF 10V TO 40V MTS62C19A-HS105 ApplicationsThere are a lot of Microchip Technology MTS62C19A-HS105 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MCP8024-H/MP OverviewThe design contains a Tubepackage.Drivers controllers comes in a 40-VFQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 6V~28V volts.A range of -40°C~150°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).Surface Mountis its recommended mounting method.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.The MCP8024part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 40 pins.There are 3 outputs available.In this case, 12Vis maintained as the output voltage.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.With a 500mA output current, it offers the greatest degree of design flexibility.In this case, 461kHzis the maximum frequency that can be achieved. MCP8024-H/MP FeaturesApplications : General Purpose base on MCP8024 number designed with 3 outputs Motor Type classified as Brushless DC (BLDC) MCP8024-H/MP ApplicationsThere are a lot of Microchip Technology MCP8024-H/MP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | E-TEA3718SFPTR OverviewDrivers controllers is designed with Tape & Reel (TR) package.A 20-SOIC (0.295, 7.50mm Width)case is included with the part.A mounting position of Surface Mountis recommended for the part.The component connected in General Purposematches it perfectly.There is a possibility of providing 4.75V~5.25Vvolts through the device.This device operates at a temperature of 0°C~150°C TJ.The part has 20terminations available.There is the option of applying the voltage to the load at the rate of 10V~45V.I would like to remind you that this amplifier should be operated at 5V.A Surface Mountmounting method is recommended for this product.Maintain the current output of the part at 1.5A volts.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.TEA3718is the part number that finds it.20 pins are provided for its design.Drivers controllers belongs to the series [0].There are a total of 1outputs available. E-TEA3718SFPTR FeaturesApplications : General Purpose Load voltage across the chip 10V~45V base on TEA3718 number designed with 1 outputs E-TEA3718SFPTR ApplicationsThere are a lot of STMicroelectronics E-TEA3718SFPTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8701PRGET OverviewThe design contains a Tape & Reel (TR)package.Drivers controllers comes in a 24-VFQFN Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.The device can supply 0V~5.5V volts.The operating temperature ranges from -40°C~125°C TAto -40°C~125°C TA.Motors can be classified as Brushed DC.In this part, there are 24 terminations available.Drivers controllers is possible to apply voltage at a rate of 5.9V~45Vto the load.The amplifier should be set to 8V.There is Surface Mount recommended mounting method for this device.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.Drivers controllers is based on the DRV8701 part number.24 pins are provided for its design.Drivers controllers belongs to the Motion Control Electronics series. DRV8701PRGET FeaturesApplications : General Purpose Load voltage across the chip 5.9V~45V base on DRV8701 number DRV8701PRGET ApplicationsThere are a lot of Texas Instruments DRV8701PRGET motor drivers applications.
|
9053
In-stock
|
Get Quote | |||
Texas Instruments | DRV8320RSRHAT OverviewThis package was designed with Tape & Reel (TR)in mind.Drivers controllers comes in a 40-VFQFN Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to Brushless DC (BLDC).There is a capability for the device to provide 6V~60V volts.With regard to operating temperature, it ranges -40°C~125°C TA. There is a motor type Brushless DC (BLDC)associated with this motor type.This part offers 40terminations.You should run this amplifier at 24V.Maintain a current of 5mAfor the part output.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.DRV8320is the part number that finds it.40pins are used in its design. DRV8320RSRHAT FeaturesApplications : Brushless DC (BLDC) base on DRV8320 number DRV8320RSRHAT ApplicationsThere are a lot of Texas Instruments DRV8320RSRHAT motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6474H OverviewThis package was designed with Tubein mind.A 28-TSSOP (0.173, 4.40mm Width) Exposed Padcase is included with the part.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.There is a possibility of providing 3.3V 5Vvolts through the device.This device operates at a temperature of -40°C~150°C TJ.This part offers 28terminations.You can apply voltage at 8V~45Vto the load.I would like to remind you that this amplifier should be operated at 3.3V.A Surface Mountmounting method is recommended for this product.The L6474part number is used to locate the part.28pins are available on the device.In the Motion Control Electronicsseries, it is included.1outputs are available.45Vis maintained as the output voltage.In this case, STSPIN L64is maintained as the output voltage.0 indicates that the motor type is [0].For optimal operation, its maximum output current reaches [0].Its operating current is 650μA. L6474H FeaturesApplications : General Purpose Load voltage across the chip 8V~45V base on L6474 number designed with 1 outputs Motor Type classified as Stepper L6474H ApplicationsThere are a lot of STMicroelectronics L6474H motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3626DW OverviewThis package was designed with Tubein mind.This part is packaged with a case of [0].Surface Mountshould be used for mounting the part.Fits the component connected to General Purpose.In this case, the device can supply 11V~14.5V volts.There is a temperature range of 0°C~70°C TAin which this device operates.Drivers controllers is possible to classify the motor type as Brushless DC (BLDC).The part supports 28terminations.I would like to remind you that this amplifier should be operated at 12V.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The part number UCC3626indicates that it is found.28 pins are provided for its design.Drivers controllers is a part of the Motion Control Electronics series.There are 1 outputs available.5.2Vis maintained as the output voltage.Drivers controllers is possible to recognize the motor type as [0].As it has a 2mAoutput current, it provides maximum design flexibility.As a result, the maximum output current reaches 100mAin order to meet the requirements of the operation. UCC3626DW FeaturesApplications : General Purpose base on UCC3626 number designed with 1 outputs Motor Type classified as Brushless DC (BLDC) UCC3626DW ApplicationsThere are a lot of Texas Instruments UCC3626DW motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6235D OverviewThe package is designed with [0].The part is packged with 24-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.There is a possibility of providing 12V~52Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -25°C~125°C TJdegrees Celsius.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).A total of 24terminations are available in this part.Drivers controllers is possible to apply voltage to the load at the rate of 12V~52V.The amplifier should be set to 48V.Surface Mountis its recommended mounting method.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.According to the L6235part number, the part is found.The device has 24 pins.Drivers controllers belongs to the Motion Control Electronics series.Drivers controllers is possible to access 3outputs.The driver operates from a supply voltage of 42V volts.Drivers controllers is maintained at 52V volts.STSPIN L62is maintained as the output voltage.The motor type can be recognized as Brushless DC (BLDC). L6235D FeaturesApplications : General Purpose Load voltage across the chip 12V~52V base on L6235 number designed with 3 outputs Motor Type classified as Brushless DC (BLDC) L6235D ApplicationsThere are a lot of STMicroelectronics L6235D motor drivers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | L6226PDTR OverviewDrivers controllers is designed wDrivers controllersh a package of [0].Drivers controllers is packaged wDrivers controllersh a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposeis compatible with it.Drivers controllers is capable of supplying 8V~52V volts.The operating temperature ranges from -25°C~125°C TJto -25°C~125°C TJ.In this case, the motor type is Brushed DC.This part has 36termination options.At a rate of [0], voltage can be applied to the load.I would like to remind you that this amplifier should be operated at 48V.The recommended mounting method is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.According to the L6226part number, the part is found.36 pins are provided for its design.Drivers controllers belongs to Motion Control Electronics series.4outputs are available in total.Drivers controllers operates from a voltage of 48V volts.In this case, 52Vis maintained as the output voltage.Drivers controllers is maintained at a voltage of STSPIN L62.For compliance with the operation requirements, the maximum output current is [0]. L6226PDTR FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6226 number designed with 4 outputs L6226PDTR ApplicationsThere are a lot of STMicroelectronics L6226PDTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DRV8841PWP OverviewThis package was designed with Tubein mind.Parts are packaged in 28-PowerTSSOP (0.173, 4.40mm Width)cases.The part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.This device is capable of supplying voltages up to 8.2V~45V volts.Operation temperature ranges from -40°C~150°C TJ.There is a motor type Brushed DCavailable.A total of 28terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of 8.2V~45Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.There is Surface Mount recommended mounting method for this device.Using the DRV8841part number, it is located.In this device, there are 28 pins.The Motion Control Electronicsseries includes this item.The motor type can be recognized as Stepper. DRV8841PWP FeaturesApplications : General Purpose Load voltage across the chip 8.2V~45V base on DRV8841 number Motor Type classified as Stepper DRV8841PWP ApplicationsThere are a lot of Texas Instruments DRV8841PWP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC33931EK OverviewThe package is designed with [0].This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.The component connected in Automotiveis compatible with it.Drivers controllers is capable of supplying 5V~28V volts.The operating temperature ranges from -40°C~125°C TAto -40°C~125°C TA.A motor of this type can be categorized as Brushed DC.At a rate of [0], voltage can be applied to the load.Maintain a current of 5A for the part output.The MC33931part number is used to locate the part. MC33931EK FeaturesApplications : Automotive Load voltage across the chip 5V~28V base on MC33931 number MC33931EK ApplicationsThere are a lot of NXP USA Inc. MC33931EK motor drivers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.