Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | CD74HC4094NSRG4 OverviewThere is a SOP package embedded with the device. This chip has a total termination count of 16. It is used to pack in Tape and Reel case. This part has an operating supply voltage of 4.5V. It is a part that has 1 elements on it. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. A total of 8 bits are present on the IC chip. It has a total of 16 pins. Under temperatures below 125°C, it is recommended to use it. Ideally, it should not fall below -55°C. Under 6V, this voltage is employed. It is necessary to use a voltage that is higher than 2V to provide this supply. There are 10 output lines to operate. There is a subcategory of it called Shift Registers. CD74HC4094NSRG4 FeaturesWith 16 pins Operate supply voltage at 5V With 10 output lines CD74HC4094NSRG4 ApplicationsThere are a lot of Texas Instruments CD74HC4094NSRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54LS674J OverviewThe device is embedded in CDIP package. Chip terminations add up to 24. 5V is the operating supply voltage of the part. It is a part that has 1 elements on it. 24 pins are located on the device. It is recommended to mount by Through Hole in order to get the best results. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. It has 16 bits in total. There are a total of 24 pins on it. Temperatures below 125°C are recommended for use. It should not be lower than -55°C to operate this device. We use this supply voltage under 5.5V. It is used at a voltage greater than 4.5V. There is a TUBE packaging for the part. SNJ54LS674J FeaturesWith 24 pins Operate supply voltage at 5V Packing Method : TUBE SNJ54LS674J ApplicationsThere are a lot of Texas Instruments SNJ54LS674J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4035BEE4 OverviewThere is a PDIP package embedded with the device. 16 is the sum of the number of terminations in the chip. This item is packed in case Rail/Tube. This part has an operating supply voltage of 5V. The part consists of 1 elements. 16 pins are available on the device. It is recommended to mount by Through Hole. The operating supply voltage of this chip is noted to be within the range 15V. The device has a total of 6 input lines. In total, it has 16 pins. It is recommended that it be used at temperatures below 125°C. For this device to work, it should not go below -55°C. We use this supply voltage under 18V. This supply voltage is employed higher than 3V. It runs on a quiescent current of 100μA. It belongs to the Shift Registers subcategory. CD4035BEE4 FeaturesWith 16 pins Operate supply voltage at 15V Quiescent Current at 100μA CD4035BEE4 ApplicationsThere are a lot of Texas Instruments CD4035BEE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 5962-8995301EA OverviewIn package CDIP, there is an embedded device. There are 16 terminations on the chip. Rail/Tube is the case in which it is packed. Parts with a 4.5V operating supply voltage are specified. 2 elements make up this part. 16 pins are provided on the device. It is recommended to mount by Through Hole in order to get the best results. Electronic components fall under the category of HC/UH. It has a total of 4 pins. There are a total of 16 pins on it. Under temperatures below 125°C, it is recommended to use it. Operation of this device requires a value greater than -55°C. This supply voltage is employed under 6V. This supply voltage is employed higher than 2V. A quiescent current of 8μA is used to run the device. 5962-8995301EA FeaturesWith 16 pins Quiescent Current at 8μA 5962-8995301EA ApplicationsThere are a lot of Texas Instruments 5962-8995301EA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC165MTG4 OverviewSOIC is a package containing the embedded device. This chip has a total termination count of 16. Its operating supply voltage is rated at 4.5V. It is a part that has 1 elements on it. The device is equipped with 16 pins. Surface Mount is recommended for mounting. There is an electronic component in the HC/UH. As noted, this chip operates within the range of 5V. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines. A total of 8 bits are present on the IC chip. The total number of pins is 16. This product should not be used at temperatures above 125°C. For this device to work, it should not go below -55°C. We use this supply voltage under 6V. It is used at a voltage greater than 2V. CD74HC165MTG4 FeaturesWith 16 pins Operate supply voltage at 5V CD74HC165MTG4 ApplicationsThere are a lot of Texas Instruments CD74HC165MTG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54HC166J OverviewAs a result, CDIP package contains the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. There is a Rail/Tube case containing it. 5V is the part's operating supply voltage. A total of 1 elements are present on this part. It is equipped with a pin count of 16. Through Hole is recommended for mounting. This electronic component is classified as HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. The total number of IC chip bits is 8. In total, there are 16 pins on it. It is recommended that it be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. 6V is the supply voltage used. Voltages higher than 2V are used for this supply. SNJ54HC166J FeaturesWith 16 pins Operate supply voltage at 5V SNJ54HC166J ApplicationsThere are a lot of Texas Instruments SNJ54HC166J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHCT595DBRG4 OverviewAs a result, SSOP package contains the embedded device. 16 is the total number of terminations on the chip. A Tape and Reel case is used to pack it. Voltage rating of the part is 5V. There are 1 elements on this part. In this device, there are 16 pins. It is recommended to mount by Surface Mount. Electronic components belong to the AHCT/VHCT/VT group. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A voltage of 5V can be delivered by it. It has a total of 8 pins. The pin count is 16. The product should be used at temperatures below 85°C. Ideally, it should not fall below -40°C. Under 5.5V, this supply voltage is employed. It is used at a voltage greater than 4.5V. There are 9 output lines to operate. SN74AHCT595DBRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74AHCT595DBRG4 ApplicationsThere are a lot of Texas Instruments SN74AHCT595DBRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54HC165W Overview16 is the number of terminations on the chip. Its operating supply voltage is rated at 5V. There are 1 elements on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. There are 8 bits on the IC chip. The total number of pins is 16. Using it below 125°C is recommended. It should not be lower than -55°C to operate this device. A voltage of 6V is employed as the supply voltage. This supply voltage is employed higher than 2V. To package the part, TUBE is used. SNJ54HC165W FeaturesWith 16 pins Operate supply voltage at 5V Packing Method : TUBE SNJ54HC165W ApplicationsThere are a lot of Texas Instruments SNJ54HC165W Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 5962-8860201KA OverviewTaking the total number of terminations on the chip and adding them up, we get 24. The part's operating supply voltage is rated 5V. Electronic components fall under the category of LS. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN. There should be no voltage less than 4.5V at the minimum supply voltage (Vsup). In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. It has 16 bits in total. In total, it has 24 pins. In its subcategory, it is listed under Shift Register. You should not use it above 125°C. 5962-8860201KA Features5962-8860201KA ApplicationsThere are a lot of Texas Instruments 5962-8860201KA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS597NS OverviewSOP is the package in which the device is embedded. 16 is the sum of the number of terminations in the chip. 5V is the operating supply voltage of the part. It is a component of the LS. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 4.75V. A device capable of delivering voltage at 5V can be used. A maximum supply voltage (Vsup) of 5.25V may be applied to this part. IC chip bits total 8. The pin count is 16. It should only be used at temperatures no greater than 70°C. SN74LS597NS FeaturesIt supplies 5V power SN74LS597NS ApplicationsThere are a lot of Texas Instruments SN74LS597NS Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | See Relate Datesheet |
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.