Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | SN74LS166ANE4 OverviewPDIP is the package in which the device is embedded. 16 is the total number of terminations on the chip. There is a Rail/Tube case containing it. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. It has 16 pins. As a general recommendation, mounting by Through Hole is recommended. This electronic component is classified as LS. 5V is noted as the operating supply voltage of this chip. This section has the following additional features: CLOCK INHIBIT. This device has 9 input lines available. A voltage of 5V can be delivered by it. IC chips contain a total of 8 bits. It has a total of 16 pins. It is recommended that it be used at temperatures below 70°C. This device should not be operated with a value lower than 0°C. It is employed under the condition of 5.25V. This supply voltage is employed higher than 4.75V. Its subcategory belongs to Shift Registers. This device operates at a frequency of 35MHz. SN74LS166ANE4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power SN74LS166ANE4 ApplicationsThere are a lot of Texas Instruments SN74LS166ANE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV8153PWE4 OverviewThere is an embedded device in the package TSSOP. A total of 20 terminations can be found on the chip. Parts with a 3.3V operating supply voltage are specified. The part consists of 1 elements. Devices with 20 pins are available. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. The operating supply voltage of this chip is noted to be within the range 5V. This part should have a minimum supply voltage (Vsup) of at least 3V. It has a total of zero pins. Temperatures below 85°C are recommended for use. Operation of this device requires a value greater than -40°C. The part is equipped with 9 outputs. SN74LV8153PWE4 FeaturesWith 20 pins Operate supply voltage at 5V SN74LV8153PWE4 ApplicationsThere are a lot of Texas Instruments SN74LV8153PWE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS164DRG4 OverviewThere is a SOIC package embedded with the device. This chip has a total termination count of 14. The case Tape & Reel (TR) contains it. There is 5V operating supply voltage listed on the part. 14 pins are present on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as LS. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: GATED SERIAL INPUTS (A AND B). The device has 2 input lines. There is a possibility of delivering voltage at 5V. There are 8 bits on the IC chip. In total, there are 14 pins on it. Under temperatures below 70°C, it is recommended to use it. For this device to work, it should not go below 0°C. Under 5.25V, this voltage is employed. It is used at a voltage greater than 4.75V. There are 8 output lines to operate. This device consists of 1 circuits in total. SN74LS164DRG4 FeaturesWith 14 pins Operate supply voltage at 5V It supplies 5V power With 8 output lines SN74LS164DRG4 ApplicationsThere are a lot of Texas Instruments SN74LS164DRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC195N OverviewAs a result, PDIP package contains the embedded device. 16 is the number of terminations on the chip. 5V is the part's operating supply voltage. In the HC/UH series, the electronic component belongs. Additional aspects of this section are as follows: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. There is a capability to deliver voltage at 2/6V. Vsup cannot exceed 6V for this part. The total number of IC chip bits is 4. In terms of its subcategory, it belongs to Shift Registers. Temperatures above 85°C must be avoided. SN74HC195N FeaturesIt supplies 2/6V power SN74HC195N ApplicationsThere are a lot of Texas Instruments SN74HC195N Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHCT594DBRG4 OverviewSSOP is the package in which the device is embedded. Chip terminations add up to 16. This item is packed in case Tape & Reel (TR). There is 5V operating supply voltage listed on the part. 1 elements make up this part. It has 16 pins. As a general recommendation, mounting by Surface Mount is recommended. In this case, the electronic component belongs to the AHCT/VHCT/VT. This chip's operating supply voltage is reported as 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. There is a capability to deliver voltage at 5V. 16 pins are present on it. Using it below 85°C is recommended. For this device to operate, it cannot be lower than -40°C. A voltage of 5.5V is employed as the supply voltage. A total of 9 output lines are available for operation. SN74AHCT594DBRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74AHCT594DBRG4 ApplicationsThere are a lot of Texas Instruments SN74AHCT594DBRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHCT594DRG4 OverviewAs a result, SOIC package contains the embedded device. It sums up to 16 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. There is 5V operating supply voltage listed on the part. The part consists of 1 elements. It is equipped with a pin count of 16. As a general recommendation, mounting by Surface Mount is recommended. An electronic component is included in the AHCT/VHCT/VT. It is noted that this chip uses an operating supply voltage of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED. There is a possibility of delivering voltage at 5V. IC chips contain a total of 8 bits. It has a total of 16 pins. This product should not be used at temperatures above 85°C. For this device to operate, it cannot be lower than -40°C. A voltage of 5.5V is employed as the supply voltage. It is important to note that this supply voltage is higher than 4.5V. The number of output lines to be operated is 9. SN74AHCT594DRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74AHCT594DRG4 ApplicationsThere are a lot of Texas Instruments SN74AHCT594DRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHCT594PWG4 OverviewEmbedded in a package of type TSSOP, the device is available for use. The number of the chip's terminations sums up to 16. The part operates at 5V voltage. 1 elements make up this part. There are 16 pins on the device. The mounting method should be Surface Mount. Electronic components fall under the category of AHCT/VHCT/VT. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. A voltage of 5V can be delivered by it. It has a total of 8 pins. The pin count is 16. Temperatures below 125°C are recommended for use. In order for this device to function, the value should not be less than -40°C. We use this supply voltage under 5.5V. It is important to note that this supply voltage is higher than 4.5V. A total of 9 output lines are available for operation. SN74AHCT594PWG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74AHCT594PWG4 ApplicationsThere are a lot of Texas Instruments SN74AHCT594PWG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD54AC299F3A OverviewAs a result, CDIP package contains the embedded device. 20 is the sum of the number of terminations in the chip. A Rail/Tube case holds it. Voltage rating of the part is 3.3V. 1 elements make up this part. Devices with 20 pins are available. Mounting by Through Hole is recommended. There is an electronic component in the AC. Additionally, this section contains the following: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. A total of 8 bits are present on the IC chip. 20 pins are present on it. The product should be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. This supply voltage is employed under 5.5V. It is used at a higher voltage than 1.5V. A quiescent current of 8μA is used. CD54AC299F3A FeaturesWith 20 pins Quiescent Current at 8μA CD54AC299F3A ApplicationsThere are a lot of Texas Instruments CD54AC299F3A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN54195J OverviewThere is an embedded device in the package CDIP. The number of the chip's terminations sums up to 16. There is 5V operating supply voltage listed on the part. In the TTL/H/L series, the electronic component belongs. There are also the following additional considerations in this section: EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK. There should be no less than 4.5V supply voltage (Vsup) for this part. The device is capable of delivering voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup). It has a total of 4 pins. 16 pins are present on it. Temperatures above 125°C must be avoided. SN54195J FeaturesIt supplies 5V power SN54195J ApplicationsThere are a lot of Texas Instruments SN54195J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS395AD OverviewThere is an embedded device in the package SOIC. The number of the chip's terminations sums up to 16. 5V is the part's operating supply voltage. In the LS series, the electronic component belongs. The following additional elements are important to note: TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT. Ensure that Vsup is not less than 4.75V when powering this part. A voltage of 5V can be delivered by it. Vsup cannot exceed 5.25V for this part. IC chips contain a total of 4 bits. 16 pins are on it. The temperature should not exceed 70°C. SN74LS395AD FeaturesIt supplies 5V power SN74LS395AD ApplicationsThere are a lot of Texas Instruments SN74LS395AD Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV166ADGVRG4 OverviewAs a result, TFSOP package contains the embedded device. 16 is the sum of the number of terminations in the chip. Tape & Reel (TR) is the case in which it is packed. This part has an operating supply voltage of 2.5V. A total of 1 elements are present on this part. It is equipped with a pin count of 16. The recommended mounting method is Surface Mount. Electronic components are categorized as LV/LV-A/LVX/H. It is noted that this chip uses an operating supply voltage of 5V. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. A voltage of 3.3V is possible with this device. A total of 8 bits are present on an IC chip. In total, it has 16 pins. Temperatures below 85°C are recommended for use. Operation of this device requires a value greater than -40°C. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 2V. In its subcategory, it is listed under Shift Registers. SN74LV166ADGVRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 3.3V power SN74LV166ADGVRG4 ApplicationsThere are a lot of Texas Instruments SN74LV166ADGVRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV166ANSRG4 OverviewSOP is a package containing the embedded device. 16 is the total number of terminations on the chip. Presented in a case of Tape & Reel (TR). Its operating supply voltage is rated at 2.5V. This part has 1 elements. Devices with 16 pins are available. Surface Mount is recommended for mounting. Electronic components are categorized as LV/LV-A/LVX/H. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. A voltage of 3.3V can be delivered by it. There are 8 bits on the IC chip. There are a total of 16 pins on it. Under temperatures below 85°C, it is recommended to use it. For this device to work, it should not go below -40°C. Under 5.5V, this voltage is employed. A voltage higher than 2V is used as a supply voltage. It belongs to the subcategory of Shift Registers. SN74LV166ANSRG4 FeaturesWith 16 pins It supplies 3.3V power SN74LV166ANSRG4 ApplicationsThere are a lot of Texas Instruments SN74LV166ANSRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 8302101RA OverviewCDIP is a package containing the embedded device. 20 is the total number of terminations on the chip. It is used to pack in Rail/Tube case. The part operates at 5V voltage. A total of 1 elements are present on this part. It is equipped with a pin count of 20. Through Hole is recommended for mounting. In the ALS series, the electronic component belongs. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section include: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. There is a capability to deliver voltage at 5V. The total number of IC chip bits is 8. 20 pins are on it. Using it below 125°C is recommended. This device should not be operated with a value lower than -55°C. 5.5V is the supply voltage used. Voltages higher than 4.5V are used for this supply. 8302101RA FeaturesWith 20 pins Operate supply voltage at 5V It supplies 5V power 8302101RA ApplicationsThere are a lot of Texas Instruments 8302101RA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54ALS323W OverviewThere are 20 terminations on the chip. The part's operating supply voltage is rated 5V. The device is equipped with 20 pins. Electronic components are categorized as ALS. It's noted that the chip's operating supply voltage is in the range 5V. There are also the following additional considerations in this section: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. It can deliver voltage at 5V. The total number of IC chip bits is 8. This board has 20 pins in total. It is recommended that it be used at temperatures below 125°C. Ideally, it should not fall below -55°C. In order to package the part properly, TUBE is used. SNJ54ALS323W FeaturesWith 20 pins Operate supply voltage at 5V It supplies 5V power Packing Method : TUBE SNJ54ALS323W ApplicationsThere are a lot of Texas Instruments SNJ54ALS323W Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 83021022A OverviewChip terminations add up to 20. It is used to pack in Rail/Tube case. The part operates at 5V voltage. On this part, there are 1 elements. 20 pins are present on the device. It is recommended to mount by Surface Mount. An electronic component is included in the ALS. As noted, this chip operates within the range of 5V. Additional aspects of this section include: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. Voltage can be delivered at 5V. IC chip bits total 8. The total number of pins is 20. Using it below 125°C is recommended. For this device to operate, it cannot be lower than -55°C. This supply voltage is employed under 5.5V. It is necessary to use a voltage that is higher than 4.5V to provide this supply. 83021022A FeaturesWith 20 pins Operate supply voltage at 5V It supplies 5V power 83021022A ApplicationsThere are a lot of Texas Instruments 83021022A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 5962-8685501EA OverviewThere is an embedded device in the package CDIP. Taking the total number of terminations on the chip and adding them up, we get 16. The case Rail/Tube contains it. This part has an operating supply voltage of 5V. The part consists of 1 elements. It is equipped with a pin count of 16. It is recommended to mount by Through Hole. Electronic components are categorized as HCT. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. Devices with voltage delivery capabilities of 5V are available. IC chips contain a total of 8 bits. 16 pins are present on it. This product should not be used at temperatures above 125°C. It should not be lower than -55°C to operate this device. 5.5V is the supply voltage used. The supply voltage is higher than 4.5V. There is a quiescent current of 8μA flowing through it. 5962-8685501EA FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power Quiescent Current at 8μA 5962-8685501EA ApplicationsThere are a lot of Texas Instruments 5962-8685501EA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54LS299J OverviewThis device can be found embedded within the package CDIP. 20 is the number of terminations on the chip. 5V is the part's operating supply voltage. On this part, there are 1 elements. 20 pins are available on the device. Using Through Hole as a mount point is recommended. It is a component of the LS. It is noted that the operating supply voltage of this chip falls within the range 5V. Please take note of the following additional aspects of this section: HOLD MODE. There is a capability to deliver voltage at 5V. There are 8 bits on the IC chip. In total, it has 20 pins. The product should be used at temperatures below 125°C. It should not be lower than -55°C to operate this device. It is used under the 5.5V supply voltage. It is used at a higher voltage than 4.5V. Packaging is in the form of TUBE. SNJ54LS299J FeaturesWith 20 pins Operate supply voltage at 5V It supplies 5V power Packing Method : TUBE SNJ54LS299J ApplicationsThere are a lot of Texas Instruments SNJ54LS299J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT164MTE4 OverviewThe device is embedded in SOIC package. Taking the total number of terminations on the chip and adding them up, we get 14. There is a Tape & Reel (TR) case containing it. Voltage rating of the part is 5V. The part consists of 1 elements. There are 14 pins on the device. Surface Mount is recommended for mounting. Electronic components are categorized as HCT. The operating supply voltage of this chip is noted to be within the range 5V. This device has 2 input lines available. It can deliver voltage at 5V. The pin count is 14. A temperature below 125°C is recommended for its use. For this device to work, it should not go below -55°C. Under 5.5V, this voltage is employed. It is important to note that this supply voltage is higher than 4.5V. CD74HCT164MTE4 FeaturesWith 14 pins Operate supply voltage at 5V It supplies 5V power CD74HCT164MTE4 ApplicationsThere are a lot of Texas Instruments CD74HCT164MTE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHC595DRG4 OverviewThere is an embedded device in the package SOIC. The number of the chip's terminations sums up to 16. It is used to pack in Tape & Reel (TR) case. Its operating supply voltage is rated at 3.3V. 1 elements make up this part. 16 pins are present on the device. Surface Mount is recommended for mounting. Electronic components belong to the AHC/VHC/H/U/V group. A range of 5V is noted as the operating supply voltage of this chip. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There are a total of 16 pins on it. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -40°C. Under 5.5V, this supply voltage is employed. This supply voltage is employed higher than 2V. There are 9 output lines to operate. SN74AHC595DRG4 FeaturesWith 16 pins Operate supply voltage at 5V With 9 output lines SN74AHC595DRG4 ApplicationsThere are a lot of Texas Instruments SN74AHC595DRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 84095012A Overview20 is the sum of the number of terminations in the chip. The part operates at 5V voltage. This part has 1 elements. It is equipped with a pin count of 20. As a general recommendation, mounting by Surface Mount is recommended. It is a component of the HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. It has a total of 8 pins. In total, it has 20 pins. At temperatures below 125°C, it is recommended for use. This device should not be operated below -55°C. We use this supply voltage under 6V. Voltages higher than 2V are used for this supply. A quiescent current of 8μA is used to run the device. Packaging is in the form of TUBE. 84095012A FeaturesWith 20 pins Operate supply voltage at 5V Quiescent Current at 8μA Packing Method : TUBE 84095012A ApplicationsThere are a lot of Texas Instruments 84095012A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHC595DG4 OverviewEmbedded in a package of type SOIC, the device is available for use. A total of 16 terminations can be found on the chip. A Rail/Tube case holds it. The part operates at 3.3V voltage. 1 elements make up this part. In this device, there are 16 pins. Surface Mount is recommended for mounting. It is a component of the AHC/VHC/H/U/V. The operating supply voltage of this chip is noted to be within the range 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A total of 8 bits are present on an IC chip. It has a total of zero pins. Under temperatures below 125°C, it is recommended to use it. In order for this device to function, the value should not be less than -40°C. It is used under the 5.5V supply voltage. There is a voltage applied to the supply that is greater than 2V. There are 9 output lines to operate. SN74AHC595DG4 FeaturesWith 16 pins Operate supply voltage at 5V With 9 output lines SN74AHC595DG4 ApplicationsThere are a lot of Texas Instruments SN74AHC595DG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV164ADGVRG4 OverviewTFSOP is the package in which the device is embedded. 14 is the total number of terminations on the chip. The Tape and Reel case contains it. The part operates at 2.5V voltage. A total of 1 elements are present on this part. 14 pins are present on the device. The recommended mounting method is Surface Mount. In this case, the electronic component belongs to the LV/LV-A/LVX/H. In terms of supply voltage, this chip operates within the range of 5V. In the device, there are 2 input lines. The device is capable of delivering voltage at 3.3V. There are a total of 14 pins on it. At temperatures below 85°C, it is recommended for use. This device should not be operated with a value lower than -40°C. A voltage of 5.5V is employed as the supply voltage. A voltage higher than 2V is used as a supply voltage. SN74LV164ADGVRG4 FeaturesWith 14 pins Operate supply voltage at 5V It supplies 3.3V power SN74LV164ADGVRG4 ApplicationsThere are a lot of Texas Instruments SN74LV164ADGVRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV164ADG4 OverviewEmbedded in a package of type SOIC, the device is available for use. 14 is the total number of terminations on the chip. 2.5V is the part's operating supply voltage. This part has 1 elements. The device is equipped with 14 pins. It is recommended to mount by Surface Mount. The electronic component belongs to the LV/LV-A/LVX/H. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: AND-GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines. Voltage can be delivered at 3.3V by the device. The pin count is 14. A temperature below 125°C is recommended for its use. It should not be less than -40°C when operating this device. It is used under the 5.5V supply voltage. It is used at a voltage greater than 2V. SN74LV164ADG4 FeaturesWith 14 pins Operate supply voltage at 5V It supplies 3.3V power SN74LV164ADG4 ApplicationsThere are a lot of Texas Instruments SN74LV164ADG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54ALS165J OverviewThere is an embedded device in the package CDIP. This chip has a total termination count of 16. Parts with a 5V operating supply voltage are specified. It is a part that has 1 elements on it. 16 pins are present on the device. Through Hole is recommended for mounting. Electronic components fall under the category of ALS. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: CLOCK INHIBIT. There is a capability to deliver voltage at 5V. IC chip bits total 8. 16 pins are present on it. It should be used below 125°C. For this device to operate, it cannot be lower than -55°C. It is used under the 5.5V supply voltage. It is important to note that this supply voltage is higher than 4.5V. SNJ54ALS165J FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power SNJ54ALS165J ApplicationsThere are a lot of Texas Instruments SNJ54ALS165J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV164ANSRG4 OverviewThere is an embedded device in the package SOP. This chip has a total termination count of 14. It is packed in a case number Tape and Reel. A voltage of 2.5V is specified for the part's operating supply. A total of 1 elements are present on this part. 14 pins are located on the device. Mounting by Surface Mount is recommended. The electronic component belongs to the LV/LV-A/LVX/H. In the device, there are 2 input lines. The device is capable of delivering voltage at 3.3V. The total number of pins is 14. It is recommended that it be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. A voltage of 5.5V is used to supply this voltage. A voltage higher than 2V is used as a supply voltage. SN74LV164ANSRG4 FeaturesWith 14 pins It supplies 3.3V power SN74LV164ANSRG4 ApplicationsThere are a lot of Texas Instruments SN74LV164ANSRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 5962-8860201JA OverviewCDIP package contains the device. It sums up to 24 where the chip's terminations add up. The Rail/Tube case contains it. 5V is the operating supply voltage of the part. This part has 1 elements. 24 pins are located on the device. It is recommended to mount by Through Hole in order to get the best results. Electronic components are categorized as LS. As noted, this chip operates within the range of 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN. There are 16 bits in the IC chip. 24 pins are present on it. The product should be used at temperatures below 125°C. Ideally, it should not fall below -55°C. It is used under the 5.5V supply voltage. This supply voltage is employed higher than 4.5V. 5962-8860201JA FeaturesWith 24 pins Operate supply voltage at 5V 5962-8860201JA ApplicationsThere are a lot of Texas Instruments 5962-8860201JA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN54LS673J OverviewCDIP is the package in which the device is embedded. 24 is the number of terminations on the chip. Rail/Tube is the case in which it is packed. Its operating supply voltage is rated at 5V. 1 elements are present in this part. 24 pins are present on the device. Mounting by Through Hole is recommended. There is an electronic component in the LS. A range of 5V is noted as the operating supply voltage of this chip. IC chip bits total 16. The pin count is 24. Temperatures below 125°C are recommended for use. In order for this device to function, the value should not be less than -55°C. A voltage of 5.5V is employed as the supply voltage. Voltages higher than 4.5V are used for this supply. SN54LS673J FeaturesWith 24 pins Operate supply voltage at 5V SN54LS673J ApplicationsThere are a lot of Texas Instruments SN54LS673J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT597MTG4 OverviewSOIC is a package containing the embedded device. It sums up to 16 where the chip's terminations add up. It is used to pack in Tape & Reel (TR) case. 5V is the part's operating supply voltage. On this part, there are 1 elements. 16 pins are provided on the device. Surface Mount is recommended for mounting. The electronic component belongs to the HCT. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. It can deliver voltage at 5V. It has a total of 8 pins. There are a total of 16 pins on it. Using it below 125°C is recommended. It should not be lower than -55°C to operate this device. A voltage of this type is employed under 5.5V. It is used at a higher voltage than 4.5V. CD74HCT597MTG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power CD74HCT597MTG4 ApplicationsThere are a lot of Texas Instruments CD74HCT597MTG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT597MG4 OverviewSOIC package contains the device. It sums up to 16 where the chip's terminations add up. The part's operating supply voltage is rated 5V. A total of 1 elements can be found on this part. 16 pins are located on the device. The mounting method should be Surface Mount. It is a component of the HCT. 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. A voltage of 5V can be delivered by it. A total of 8 bits are present on the IC chip. In total, there are 16 pins on it. It should be used below 125°C. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. It is important to note that this supply voltage is higher than 4.5V. It runs on a quiescent current of 8μA. CD74HCT597MG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power Quiescent Current at 8μA CD74HCT597MG4 ApplicationsThere are a lot of Texas Instruments CD74HCT597MG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC4094MTG4 OverviewThe device is embedded in SOIC package. 16 is the number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. The part's operating supply voltage is rated 4.5V. There are 1 elements on this part. In this device, there are 16 pins. Mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section include: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. It has a total of zero pins. It should be used below 125°C. In order for this device to function, the value should not be less than -55°C. A voltage of this type is employed under 6V. A total of 10 output lines need to be operated. In terms of its subcategory, it belongs to Shift Registers. CD74HC4094MTG4 FeaturesWith 16 pins Operate supply voltage at 5V With 10 output lines CD74HC4094MTG4 ApplicationsThere are a lot of Texas Instruments CD74HC4094MTG4 Shift Registers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.