Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartForce Sensors(6640)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | SN74HCT138PWRG4 OverviewThis is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74HCT series.The basic configuration of this system includes 16 terminations.In addition, it also has a base part number of 74HCT138, which can be used to find related parts.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HCT family.There are 8 bits in signal multiplexer.In order for 5V to operate normally, a power supply is provided.In order for the turn signal switch to work, there are 8 outputs.Decoder/Drivers is a category for the digital switch ics.Without any external influences, it consumes 80μA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A multiplexer such as this has 3 inputs available.TR is used to package the switches.The mux switch configuration consists of 1 elements. SN74HCT138PWRG4 FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT138PWRG4 ApplicationsThere are a lot of Texas Instruments SN74HCT138PWRG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC157DRG4 OverviewProviding this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged according to the Tape & Reel (TR) method.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.Using a 2V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74AHC series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number of 74AHC157 which can also be used in order to locate the logic switch that are related to this item.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 16 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is a member of the AHC/VHC/H/U/V family.The multiplexer ic provides 2 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch contains 1 outputs designed to operate.A multiplexer such as this has 8 inputs available.The switches is packaged according to the way of TR.In the turn signal switch's circuit, there are 4 channels used for transmission. SN74AHC157DRG4 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single SN74AHC157DRG4 ApplicationsThere are a lot of Texas Instruments SN74AHC157DRG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | 74LVC2G157DCTRE4 OverviewThis is a relatively small item of digital switch that is included in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) in order to save space on the board.It is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Multiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.65V~5.5V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74LVC series, which provide extensive application potential.As part of its basic configuration, 8 terminations are designed as a part of it.The part number for 74LVC2G157 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 1.8V voltage.This turn signal switch has a total of 8 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.A configuration of 8 pins is used.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of LV/LV-A/LVX/H.In this signal multiplexer, there are 2 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.The power supply of 3.3V is provided for mux switch's normal operation.This turn signal switch has 1 outputs designed for its operation.This multiplexer provides 2 inputs.TR is used to package the switches. 74LVC2G157DCTRE4 FeaturesSupplied in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Adopting a supply type of Single Power supplies of 3.3V 74LVC2G157DCTRE4 ApplicationsThere are a lot of Texas Instruments 74LVC2G157DCTRE4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4532BM96E4 OverviewDue to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Priority Encoder as the analog part of the circuit.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.When operated with a 3V~18V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 4000B series, they can be used in a wide variety of applications.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of CD4532, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.Its supply type is Dual, which is used as the source of power.It is configured with 16 pins.The mounting is in the way of Surface Mount.There are 8 bits signal multiplexer provides.Keeping Vsup at 3V will prevent some unwanted failures.For the turn signal switch's operation, there are 3 outputs.I would classify the digital switch ic as an electronic part belonging to the Arithmetic Circuits category.The switches package is packaged in accordance with the TR method.In order to accept voltage levels, the multiplexers have input lines 10 on the board.There are 4 output lines designed to serve as the source of the signal. CD4532BM96E4 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Dual 10 input lines 4 output lines CD4532BM96E4 ApplicationsThere are a lot of Texas Instruments CD4532BM96E4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC138APWE4 OverviewFor the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tube.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility using digital controlled switch when it works with 1.65V~3.6V voltage.In addition to being a member of the 74LVC series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74LVC138, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 1.8V volts.This turn signal switch contains 16 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 16 pins.The mounting is in the way of Surface Mount.Among the family of LVC/LCX/Z the logic switch is a member.There are 8 bits signal multiplexer provides.For the turn signal switch's operation, there are 8 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.It consumes 10μA current of multiplexer ic since it is not affected by external factors.This multiplexer provides 3 inputs.In mux switch configuration, there are 1 elements. SN74LVC138APWE4 FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74LVC138APWE4 ApplicationsThere are a lot of Texas Instruments SN74LVC138APWE4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC238PWRG4 OverviewDigital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.The basic configuration includes 16 terminations.There is a base part number of 74HC238 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 4.5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.This supply type employs Single.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.The logic switch is included into the family of HC/UH.There are 8 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.For mux switch's normal operation, power supply 2/6V is provided.The turn signal switch contains 8 outputs designed to operate.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 8μA current of multiplexer ic.The multiplexer is equipped with 3 inputs.The switches package is packaged in accordance with the TR method.A configuration element for the mux switch consists of 1 elements. CD74HC238PWRG4 FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2/6V CD74HC238PWRG4 ApplicationsThere are a lot of Texas Instruments CD74HC238PWRG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC2G157DCTRG4 OverviewDigital switch is provided in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) for the purpose of saving board space.Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 1.65V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74LVC series can be used in a wide range of applications.Among its basic configurations are 8 terminations.You can also find related parts by using its logic switch base part number of 74LVC2G157.The multiplexer's system is powered by 1.8V voltage.Signal switch has 8 component pins.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.Currently, it is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of LV/LV-A/LVX/H.In this signal multiplexer, there are 2 bits that are provided.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.mux switch's normal operation requires the power supply of 3.3V.The turn signal switch has 1 outputs designed for operation.The multiplexer provides 2 inputs.TR is used to package the switches. SN74LVC2G157DCTRG4 FeaturesSupplied in the 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC2G157DCTRG4 ApplicationsThere are a lot of Texas Instruments SN74LVC2G157DCTRG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC157NG4 OverviewDue to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.In this case, it is packaged as Tube.digital switch ic uses the method of Through Hole for mounting.the multiplexers uses IC Multiplexer as the analog IC.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HC series, they can be used in a wide variety of applications.There is a base part number of 74HC157 which can also be used in order to locate the logic switch that are related to this item. SN74HC157NG4 FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package SN74HC157NG4 ApplicationsThere are a lot of Texas Instruments SN74HC157NG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74HC158DR OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Multiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sWith the 74HC series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74HC158, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.With 16 pins, it is configured.The mounting point is Surface Mount.The HC/UH family includes the logic switch.The multiplexer ic provides 2 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Avoid unnecessary failures by keeping Vsup at 6V.In order for the turn signal switch to work, there are 1 outputs.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.In this multiplexer, there is a total of 8 inputs.In accordance with TR, switches can be packaged.This turn signal switch's circuit is based on a circuit with 4 channels. SN74HC158DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74HC158DR ApplicationsThere are a lot of Texas Instruments SN74HC158DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
999
In-stock
|
Get Quote | ||||
| Ultralife | SN74HC153NG4 OverviewAs a means of saving space, digital switch is provided in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.As far as mounting is concerned, digital switch ic uses Through Hole.A digital IC Multiplexer is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.The base part number is 74HC153, which can also be used to find its logic switch related parts. SN74HC153NG4 FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package SN74HC153NG4 ApplicationsThere are a lot of Texas Instruments SN74HC153NG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4066BPWG4 OverviewDue to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.Bilateral, FET Switches is the analog IC that the multiplexers uses.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 14 range.You can also find related parts by using its logic switch base part number of CD4066.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 14 component pins.GULL WING represents the end of conductors.Dual, Single is employed as its supply type.This multiplexer ic has 14 pins configured.The mounting is in the way of Surface Mount.It is provided that 5/15V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Multiplexer or Switches.It operates with a resistance of 1.05kOhm.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. CD4066BPWG4 FeaturesSupplied in the 14-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Dual, Single Power supplies of 5/15V CD4066BPWG4 ApplicationsThere are a lot of Texas Instruments CD4066BPWG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4016BMG4 OverviewIt is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bilateral, FET Switches.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.With a supply voltage of 3V~18V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.The part number for CD4016 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V voltage.There are 14 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.There is a type of supply Dual, Single that is employed in this case.With 14 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer provides 1 bits.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.This multiplexer is equipped with 4 inputs and 4 outputs.A resistance of 2kOhm is used to operate the signal switching.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. CD4016BMG4 FeaturesSupplied in the 14-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Dual, Single CD4016BMG4 ApplicationsThere are a lot of Texas Instruments CD4016BMG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC2G157DCU3 OverviewIn order to save board space, digital switch is located in the 8-VFSOP (0.091, 2.30mm Width).The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Data Selector/Multiplexer.A temperature of -40°C~85°C TA will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 1.65V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74LVC series multiplexers.As part of its basic configuration, 8 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74LVC2G157 may also be used.For multiplexer's system, a voltage of 3.3V is supplied.GULL WING is used as the point at which the conductors come to an end as part of this formula.The logic switch is a member of the LV/LV-A/LVX/H family.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.The turn signal switch has 1 outputs.In this multiplexer, there is a total of 2 inputs. SN74LVC2G157DCU3 FeaturesSupplied in the 8-VFSOP (0.091, 2.30mm Width) package SN74LVC2G157DCU3 ApplicationsThere are a lot of Texas Instruments SN74LVC2G157DCU3 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LVC157APWRE4 OverviewThis is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.Multiplexers from the 74LVC series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC157 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 1.8V.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.The board has 16 pins configured.The mount is in Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Signal multiplexer contains 2 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.There are 1 outputs designed for the operation of the turn signal switch.This multiplexer is equipped with 8 inputs and 8 outputs.The switches package is packaged in accordance with the TR method.A total of 4 channels are used for transmission in the turn signal switch's circuit. SN74LVC157APWRE4 FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC157APWRE4 ApplicationsThere are a lot of Texas Instruments SN74LVC157APWRE4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT153M96 OverviewProviding this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers of the 74HCT series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74HCT153, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.The board is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the HCT family.As a result, signal multiplexer provides a total of 4 bits.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch operates with 1 outputs.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It has 8 inputs.In accordance with TR, switches can be packaged.This turn signal switch's circuit uses 2 transmission channels. CD74HCT153M96 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT153M96 ApplicationsThere are a lot of Texas Instruments CD74HCT153M96 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC138DG4 OverviewDue to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.These multiplexers are members of the 74AHC series, which provide extensive application potential.The basic configuration includes 16 terminations.There is a base part number 74AHC138 that can be used to locate signal switch's related components as well.In this case, 3.3V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the AHC/VHC/H/U/V family.Signal multiplexer consists of 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.There is a power supply provided for the mux switch's normal operation of 2/5.5V.This turn signal switch has 8 outputs designed for its operation.The part belongs to the Decoder/Drivers category of signal switches.Not being affected by the external factors, consumes 4μA current of multiplexer ic.In this multiplexer, there is a total of 3 inputs.In mux switch configuration, there are 1 elements. SN74AHC138DG4 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/5.5V SN74AHC138DG4 ApplicationsThere are a lot of Texas Instruments SN74AHC138DG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
1577
In-stock
|
Get Quote | ||||
| Kraft Tool Co |
999
In-stock
|
Get Quote | ||||
| APS | PM8305-LGI OverviewIn this case, it is packaged as Tray.As you can see, it is mounted in the direction of Surface Mount.With a supply voltage of 1.8V, reliable performance of the multiplexers can be achieved. PM8305-LGI FeaturesOperating with the supply voltage of 1.8V PM8305-LGI ApplicationsThere are a lot of Microchip Technology PM8305-LGI Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Kraft Tool Co |
999
In-stock
|
Get Quote | ||||
| Kraft Tool Co |
999
In-stock
|
Get Quote | ||||
| Kraft Tool Co |
999
In-stock
|
Get Quote | ||||
| MG Chemicals | 74CBTLVD3245DS,118 OverviewAs a means of saving space, digital switch is provided in the 20-SSOP (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~125°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.The part number for 74CBTLVD3245 can be used to find its logic switch related parts as well.Signal switch has 20 component pins. 74CBTLVD3245DS,118 FeaturesSupplied in the 20-SSOP (0.154, 3.90mm Width) package 74CBTLVD3245DS,118 ApplicationsThere are a lot of NXP USA Inc. 74CBTLVD3245DS,118 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| Kraft Tool Co |
999
In-stock
|
Get Quote | ||||
| MG Chemicals | CBTU4411EE,518 OverviewFor the purpose of saving board space, digital switch is included in the 72-LFBGA.Tape & Reel (TR) is the packaging method.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 1.7V~1.9V, designers are provided with a greater degree of flexibility.In addition to being a member of the CBT series, these multiplexers have a wide range of applications.There is a design for terminating 72 as part of its basic configuration.There is a base part number 74CBTU4411 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemIn this turn signal switch, there are 72 components that can be connected to each pin.As a result, BALL represents the end of the conductors.In the signal multiplexer, there are 11 bits available.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.A resistance of 2 governs its operation. CBTU4411EE,518 FeaturesSupplied in the 72-LFBGA package CBTU4411EE,518 ApplicationsThere are a lot of NXP USA Inc. CBTU4411EE,518 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | CBT3245ADS,112 OverviewFor the purpose of saving board space, digital switch is included in the 20-SSOP (0.154, 3.90mm Width).The package is packaged in accordance with Tube.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.There are 20 terminations included in its basic configuration.The base part number is 74CBT3245, which is also useful when looking up signal switch's related components.In multiplexer's system, 5V is the voltage supplied.There are 20 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 1 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.Keeping Vsup at 5.5V will prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.2 ports are used for some other peripheral signal switchings to plug in. CBT3245ADS,112 FeaturesSupplied in the 20-SSOP (0.154, 3.90mm Width) package Power supplies of 5V CBT3245ADS,112 ApplicationsThere are a lot of NXP USA Inc. CBT3245ADS,112 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | CBT16210DGG,518 OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 48-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the packaging method.digital switch ic uses the method of Surface Mount for mounting.Bus Switch is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 48 range.There is a base part number 74CBT16210 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.This turn signal switch has 48 component pins.It employs GULL WING as the point at which conductors come to an end.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits provided.To avoid unnecessary failures, keep the supply voltage at 4.5V (Vsup).It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.The signal switching operates with a resistance of 2. CBT16210DGG,518 FeaturesSupplied in the 48-TFSOP (0.240, 6.10mm Width) package CBT16210DGG,518 ApplicationsThere are a lot of NXP USA Inc. CBT16210DGG,518 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | CBTD16212DL,112 OverviewProviding this information in the 56-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus FET Exchange Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 56 terminations are desgined.The base part number is 74CBTD16212, which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 56 component pins.It is the end of conductors that is represented by GULL WING.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 12 bits signal multiplexer provides.Keeping the minimum supply voltage (Vsup) at 4.5V prevents some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.It is provided that 5V has a power supply in order to function normally.This is a signal switch that is categorized as Other Logic ICs.A resistance of 4 governs its operation. CBTD16212DL,112 FeaturesSupplied in the 56-BSSOP (0.295, 7.50mm Width) package Power supplies of 5V CBTD16212DL,112 ApplicationsThere are a lot of NXP USA Inc. CBTD16212DL,112 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | CBT3126DS,112 OverviewDigital switch is provided in the 16-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBT series, which provide extensive application potential.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74CBT3126, so you can find its logic switch related parts using that number.The multiplexer's system works with 5V voltage.Signal switch has 16 component pins.A conductor terminates at GULL WING.The logic switch is included into the family of CBT/FST/QS/5C/B.There are 1 bits signal multiplexer provides.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.A resistance of 2 is used to operate the signal switching. CBT3126DS,112 FeaturesSupplied in the 16-SSOP (0.154, 3.90mm Width) package Power supplies of 5V CBT3126DS,112 ApplicationsThere are a lot of NXP USA Inc. CBT3126DS,112 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
