Force Sensors(6640)

SN74LVC257AQDRQ1 Overview

Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Using a 2V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the Automotive, AEC-Q100, 74LVC series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74LVC257, which is also useful when looking up signal switch's related components.In this case, 2.7V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.In this signal multiplexer, there are 2 bits that are provided.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.As part of the operation of this turn signal switch, there are 1 outputs.The switches package is packaged in a way which is consistent with TAPE AND REEL.As a result of the operation of the digitalswitch, 4 circuits are formed.

SN74LVC257AQDRQ1 Features

Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V

SN74LVC257AQDRQ1 Applications

There are a lot of Texas Instruments
SN74LVC257AQDRQ1 Signal Switches / Multiplexers / Decoders applications.

• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission
• Video transmission
• Image transmission
• Recording transmission
• Combinational circuit
• Logic gates for other digital devices
• Signal router
• Data communication

SN74CBT16800CDLR Overview

In order to save board space, digital switch is located in the 48-BSSOP (0.295, 7.50mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.The basic configuration includes 48 terminations.The base part number is 74CBT16800, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch has 48 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.With 48 pins, it is configured.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer provides 20 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.With a resistance of 0, it operates.With a resistance of 12Ohm, it operates.For greater switches' flexibility, the output current of 64mA is provided.

SN74CBT16800CDLR Features

Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16800CDLR Applications

There are a lot of Texas Instruments
SN74CBT16800CDLR Signal Switches / Multiplexers / Decoders applications.

• Telephone network
• Computer memory
• Transmission from the computer system of a satellite
• Time division multiplexing system
• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission

SN74CBT16811CDLR Overview

In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBT series can be used in a wide range of applications.The basic configuration includes 56 terminations.The base part number is 74CBT16811, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch has 56 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.With 56 pins, it is configured.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer provides 24 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.With a resistance of 0, it operates.With a resistance of 12Ohm, it operates.For greater switches' flexibility, the output current of 64mA is provided.

SN74CBT16811CDLR Features

Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT16811CDLR Applications

There are a lot of Texas Instruments
SN74CBT16811CDLR Signal Switches / Multiplexers / Decoders applications.

• Telephone network
• Computer memory
• Transmission from the computer system of a satellite
• Time division multiplexing system
• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission

SN74CBT3384CDBR Overview

For the purpose of saving board space, digital switch is included in the 24-SSOP (0.209, 5.30mm Width).In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.Among its basic configurations are 24 terminations.In addition, it also has a base part number of 74CBT3384, which can be used to find related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 24 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.The board has 24 pins configured.The mounting is in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 10 bits available.Keeping Vsup at 4V will prevent some unwanted failures.A power supply is provided for mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The resistance is 2.12Ohm is the resistance at which it operates.For higher switches' flexibility, 64mA is provided as an output current.

SN74CBT3384CDBR Features

Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT3384CDBR Applications

There are a lot of Texas Instruments
SN74CBT3384CDBR Signal Switches / Multiplexers / Decoders applications.

• Computer memory
• Transmission from the computer system of a satellite
• Time division multiplexing system
• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission
• Video transmission

SN74CBT3383CDGVR Overview

In order to conserve board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Bus FET Exchange Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74CBT series, which provide extensive application potential.This configuration includes 24 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74CBT3383.For multiplexer's system, 5V voltage is supplied.This turn signal switch has a total of 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.Currently, it is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 2 bits provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as Other Logic ICs.No external influence consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.It has 10 inputs.The resistance of the signal switching is 4.The system operates with a resistance of 8Ohm.For higher switches' flexibility, the output current is set to 64mA.

SN74CBT3383CDGVR Features

Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT3383CDGVR Applications

There are a lot of Texas Instruments
SN74CBT3383CDGVR Signal Switches / Multiplexers / Decoders applications.

• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission
• Video transmission
• Image transmission
• Recording transmission
• Combinational circuit

SN74CBT6800CDBR Overview

It is included in the 24-SSOP (0.209, 5.30mm Width) in order to save board space.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.Among its basic features are 24 terminations.There is a base part number 74CBT6800 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.A component pin count of 24 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.There are 24 pins on it.The mount is in Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order for 5V to operate normally, a power supply is provided.The part belongs to the Bus Driver/Transceivers category of signal switches.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.A resistance of 12Ohm is used to operate the signal switching.64mA provides a high degree of switches' flexibility.

SN74CBT6800CDBR Features

Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT6800CDBR Applications

There are a lot of Texas Instruments
SN74CBT6800CDBR Signal Switches / Multiplexers / Decoders applications.

• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission
• Video transmission
• Image transmission
• Recording transmission
• Combinational circuit
• Logic gates for other digital devices

SN74CBT6845CDBQR Overview

Due to the lack of space on the board, digital switch is provided in the 20-SSOP (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBT series are suitable for a wide range of applications.There are 20 terminations included in its basic configuration.The base part number is 74CBT6845, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 20 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic has 20 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 8 bits that are provided.Vsup should be kept at 4V to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 12Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.

SN74CBT6845CDBQR Features

Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT6845CDBQR Applications

There are a lot of Texas Instruments
SN74CBT6845CDBQR Signal Switches / Multiplexers / Decoders applications.

• Implementing boolean functions with multiple variables
• Data collection system
• Audio transmission
• Video transmission
• Image transmission
• Recording transmission
• Combinational circuit
• Logic gates for other digital devices
• Signal router
• Data communication

CD74HC147NSRE4 Overview

Digital switch is provided in the 16-SOIC (0.209, 5.30mm Width) for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.Priority Encoder is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sAs a member of 74HC series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74HC147 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemThere are 16 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.There are 9 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.The power supply of 2/6V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Arithmetic Circuits.The multiplexers have 10 input lines used to accept voltage levels.There are 4 output lines designed to serve as the source of the signal.

CD74HC147NSRE4 Features

Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
10 input lines
4 output lines

CD74HC147NSRE4 Applications

There are a lot of Texas Instruments
CD74HC147NSRE4 Signal Switches / Multiplexers / Decoders applications.

• Communication system
• Telephone network
• Computer memory
• Transmission from the computer system of a satellite
• Time division multiplexing system
• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system