815-TPS53129RGER

Manufacturer:

Texas Instruments

Product Number:

815-TPS53129RGER

Description:

TPS53129RGER Overview

The switching controller fits in the 24-VFQFN Exposed Pad package and is ideal for most applications. dc motor controller is suitable for 2 output generation. PMIC

Datasheet:

TPS53129RGER

Description:

TPS53129RGER Overview

The switching controller fits in the 24-VFQFN Exposed Pad package and is ideal for most applications. dc motor controller is suitable for 2 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.5V~24V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Soft Start for efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. There are many different types of terminations for 24. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 5.5V is input. You can find other relevant dc to dc converter ics by searching "TPS53129". Total pins of switching converter are 24. Test statistics indicate DC regulator outputs 5.5V voltage. You should note down the dc dc regulator's usual output current of 15A when you start a project. There is a maximum frequency of 700kHz for this dc regulators. It is suggested that users apply 24V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It belongs to the D-CAP2? series of dc to dc voltage regulator. Dormant dc switchings use 450μA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 24V. 4.5V is the required supply voltage. DC switcher will not be able to provide an output current above 15A volts. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 760mV.

TPS53129RGER Features

Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION

TPS53129RGER Applications

There are a lot of Texas Instruments TPS53129RGER DC to DC converter applications.

• Industrial controllers
• Motor controller circuits
• Medical monitoring systems
• Post equipment
• Drilling machines
• Planers
• Nuclear power plants
• Smoke exhaust equipment
• Current source circuits
• Game consoles