815-TPS40041DRBRG4

Manufacturer:

Texas Instruments

Product Number:

815-TPS40041DRBRG4

Description:

TPS40041DRBRG4 Overview

Capsuled in the 8-VDFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1

Datasheet:

-

Description:

TPS40041DRBRG4 Overview

Capsuled in the 8-VDFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 2.25V~5.5V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. Switching can be done at 600kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Search for "TPS40041" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. Test statistics indicate DC regulator outputs 4.95V voltage. If you start a project, note down the dc dc regulator's usual output current of 15A. DC regulator has a maximum frequency of 700kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. In a dormant state, the dc switching uses 2mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. Voltage 2.25V is needed for the supply. Output current will not exceed 15A. The switching converter can output 4.84V volts at its utmost, according to the datasheet. Its lowest voltage output is not less than 600mV.

TPS40041DRBRG4 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V

TPS40041DRBRG4 Applications

There are a lot of Texas Instruments TPS40041DRBRG4 DC to DC converter applications.

• Cutting machine tools
• Adjustable voltage or current linear circuits
• Series voltage regulation circuits
• Alternators
• Electrical power transmission
• Communication system
• Textile machinery
• Motor controller circuits
• Sensitive electronic devices
• Lathes