815-UCC2813D-5

Manufacturer:

Texas Instruments

Product Number:

815-UCC2813D-5

Description:

UCC2813D-5 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate ou

Datasheet:

UCC2813D-5

Description:

UCC2813D-5 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 3.6V~12V voltage are supplied and operated. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 10V. Searching "UCC2813" will return other relevant dc to dc converter ics. There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator should be 4V. Based on the test statistics, DC regulator outputs voltage 1V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 1MHz frequency setting on the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 10V. There is a requirement for a 10V supply voltage. A controller's current should not exceed 30mA. It runs on a supply current of 500μA. For this the controllers dc, the nominal current supply is 500μA. This controller performs best at a frequency of 1MHz.

UCC2813D-5 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813D-5 Applications

There are a lot of Texas Instruments UCC2813D-5 DC to DC converter applications.

• Household control circuits
• Milling machines
• Special machining machine tools
• Handheld GPS
• Television equipment
• Elevator lighting
• Packaging
• Bending machines
• Emergency lighting monitoring equipment
• Game consoles