815-TPS53127PWR

Manufacturer:

Texas Instruments

Product Number:

815-TPS53127PWR

Description:

TPS53127PWR Overview

As a result of 24-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller i

Datasheet:

TPS53127PWR

Description:

TPS53127PWR Overview

As a result of 24-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~24V volts and has 4.5V~24V supply voltage. Suitable for a -40°C~85°C TA dc switcher. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Soft Start is used for efficient switching control in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 24 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "TPS53127". In total, switching converter has 24 pins. Switching converter is a type of Switching Regulator or Controllers in particular. A 5.5V voltage of DC regulator was detected in the test statistics. It is estimated that this dc regulatorhas a maximum frequency of 700kHz. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V to better satisfy the need. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 24V. D-CAP2? series dc to dc voltage regulator belong to this series. Dormant dc switchings use 450μA. The maximum input voltage of this dc switcher is 24V, so users must limit the voltage accordingly. Voltage 4.5V is needed for the supply. A dc switcher can only produce an output current of 15A. Current supplied to the controller should not exceed 0.8mA. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. Neither the voltage controller's lowest voltage output 760mVr its highest voltage output is less than 760mV.

TPS53127PWR Features

Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V

TPS53127PWR Applications

There are a lot of Texas Instruments TPS53127PWR DC to DC converter applications.

• Die casting equipment
• Emergency lighting monitoring equipment
• Computer monitoring equipment of building
• CNC system
• Computer-related products
• Electrical power transmission
• Scientific testing
• Surface processing equipment
• Laboratories
• Linear guide