815-TPS40211DGQR

Manufacturer:

Texas Instruments

Product Number:

815-TPS40211DGQR

Description:

TPS40211DGQR Overview

The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. It is sufficient to generate 1 o

Datasheet:

TPS40211DGQR

Description:

TPS40211DGQR Overview

The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~52V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 35kHz~1MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. The switching converters's terminals (s) are designed at DUAL. 10 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. A search for "TPS40211" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 10. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 250V. The dc dc regulator's usual output current is 400mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 95 %. Switching controllers work at 1MHz Hz. The dc switching utilizes 1.5mA when it is in a dormant state. The dc switcher's maximum input voltage is 52V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. Input current cannot exceed 6A with this dc switcher. Components may become damaged if their current exceeds 2.5mA.

TPS40211DGQR Features

Transistor Driver Outputs
Switching Frequency: 35kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 1MHz

TPS40211DGQR Applications

There are a lot of Texas Instruments TPS40211DGQR DC to DC converter applications.

• Imported equipment
• Printing equipment
• Wind power
• Wide-range voltage regulation circuits
• Geothermal power
• CNC system
• Driver circuits
• PSRR circuits
• Industrial robots
• Flexible manufacturing cells