815-TPS40002DGQ

Manufacturer:

Ultralife

Product Number:

815-TPS40002DGQ

Description:

TPS40002DGQ Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc

Datasheet:

TPS40002DGQ

Description:

TPS40002DGQ Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 2.25V~5.5V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 600kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 10 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 5V. In addition to "TPS40002", there are other relevant dc to dc converter ics you can find. There are only 10 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 2.25V. As determined by the test statistics, the output voltage of DC regulator is 4V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. The maximum duty cycle of this voltage regulator dc to dc is set to 97 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 700kHz. A dc switching in a dormant state uses 1.5mA. The supply voltage should be 5V.

TPS40002DGQ Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %

TPS40002DGQ Applications

There are a lot of Texas Instruments TPS40002DGQ DC to DC converter applications.

• Injection molding machinery
• Solar power plants
• Sink circuits
• Machining centers
• Smoke prevention equipment
• Hydro power
• Drilling machines
• Smart grid
• Overvoltage protection circuits in TV sets
• Shearing machines