815-TPS40040DRBTG4

Manufacturer:

Ultralife

Product Number:

815-TPS40040DRBTG4

Description:

TPS40040DRBTG4 Overview

This switching controller fits most application requirements since it is packaged in a 8-VDFN Exposed Pad package. For outputs of 1, this dc motor controller is su

Datasheet:

-

Description:

TPS40040DRBTG4 Overview

This switching controller fits most application requirements since it is packaged in a 8-VDFN Exposed Pad package. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 2.25V~5.5V and has a 2.25V~5.5V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 300kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. TPS40040 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 4.95V voltage. You should note that the dc dc regulator's usual output current is 15A. There is a maximum frequency of 350kHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V is used to better suit the DC to DC voltage regulator's situation. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. In a dormant state, the dc switching uses 2mA. Because the dc switcher's maximum input voltage is 5.5V users must limit the voltage accordingly. Voltage 2.25V must be supplied. There will be 15A output current greater than 15A from the dc switcher. Its datasheet indicates the switching converter can output a maximum of 4.95V volts. A voltage controller's lowest output voltage cannot be less than 600mV.

TPS40040DRBTG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V

TPS40040DRBTG4 Applications

There are a lot of Texas Instruments TPS40040DRBTG4 DC to DC converter applications.

• Electrical distribution systems
• Network technology
• Experimental setup
• Industrial robots
• Printing
• Computer application technology
• Power supplies of electronic gadgets
• Packaging
• CMM
• Hydrogen power