815-SN74CBT3253DBQR

Manufacturer:

Ultralife

Product Number:

815-SN74CBT3253DBQR

Description:

SN74CBT3253DBQR Overview

Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as

Datasheet:

SN74CBT3253DBQR

Description:

SN74CBT3253DBQR Overview

Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74CBT3253, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.There are 16 pins on it.The mount is in Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer contains 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.There is a power supply provided for the mux switch's normal operation of 5V.As part of the operation of this turn signal switch, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.A resistance of 7Ohm is used to operate the signal switching.The turn signal switch's circuit has 2 transmission channels.In addition, it provides improved characteristics compared to TTL COMPATIBLE MUX/DMUX SWITCH.Stability of the multiplexers can be kept when the supply voltage of 3μA is delivered to the load.

SN74CBT3253DBQR Features

Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
Operating with the supply current of 3μA

SN74CBT3253DBQR Applications

There are a lot of Texas Instruments SN74CBT3253DBQR Signal Switches / Multiplexers / Decoders applications.

• Data distribution
• Analog to digital conversion
• Electronically controlled engine system
• High-performance memory systems
• VGA
• Encrypted communications system
• Transmission from the computer system of a satellite
• Make full adder
• Automatic health monitoring systems
• Robotic vehicles