Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | CD74HCT139E OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Through Hole.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74HCT series multiplexers.The basic configuration includes 16 terminations.The part number for 74HCT139 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.A component pin count of 16 can be found on this turn signal switch.In this case, Single is employed as the supply type.A total of 16 pins are configured on this board.The mounting point is Through Hole.In the HCT family, the logic switch is included.The multiplexer ic provides 4 bits.For mux switch's normal operation, power supply 5V is provided.As a result, the turn signal switch consists of 4 outputs.Decoder/Drivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 8μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.In order for the digitalswitch to function normally, it has 2 circuits. CD74HCT139E FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT139E ApplicationsThere are a lot of Texas Instruments CD74HCT139E Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD3861DBR OverviewProviding this information in the 24-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.It is packaged in the way of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTD series can be used for a wide range of applications.There are 24 terminations included in its basic configuration.Its logic switch base part number is 74CBTD3861 which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.There are 24 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits provided.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in a way which is consistent with TR.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided. SN74CBTD3861DBR FeaturesSupplied in the 24-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3861DBR ApplicationsThere are a lot of Texas Instruments SN74CBTD3861DBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC237NSR OverviewIn order to save board space, digital switch is located in the 16-SOIC (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.Several applications are possible for 74HC series multiplexers.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74HC237, so you can find its logic switch related parts using that number.The multiplexer's system works with 4.5V voltage.In this turn signal switch, there are 16 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.The multiplexer ic provides 8 bits.Vsup should be kept at 2V to prevent some unnecessary failures.Keeping Vsup at 6V will prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 2/6V.The turn signal switch has 8 outputs.The digital switch ic is an electronic part classified into Decoder/Drivers.It consumes 8μA current of multiplexer ic without external influences.This multiplexer is equipped with 3 inputs and 3 outputs.TR is used to package the switches.This mux switch configuration has 1 elements. CD74HC237NSR FeaturesSupplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 2/6V CD74HC237NSR ApplicationsThere are a lot of Texas Instruments CD74HC237NSR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3383CDWR OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Bus FET Exchange Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT3383.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 24 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.There are 24 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.The power supply of 5V is provided for mux switch's normal operation.This is a signal switch that is categorized as Other Logic ICs.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.As far as the resistance is concerned, it operates with 4.With a resistance of 8Ohm, it operates. SN74CBT3383CDWR FeaturesSupplied in the 24-SOIC (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3383CDWR ApplicationsThere are a lot of Texas Instruments SN74CBT3383CDWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CLVC139AQPWRG4Q1 OverviewDue to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 1.65V~3.6V voltage.The multiplexers from Automotive, AEC-Q100, 74LVC series can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74LVC139, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 2.7V volts.Currently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.A configuration of 16 pins is used.Surface Mount is the way it is mounted.The logic switch is a member of the LVC/LCX/Z family.In the signal multiplexer, there are 4 bits available.Keep Vsup at 1.65V to avoid unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.There is a power supply provided for the mux switch's normal operation of 3.3V.It consumes 10μA current of multiplexer ic since it is not affected by external factors.According to TR, the switches is packaged.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers. CLVC139AQPWRG4Q1 FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 3.3V 2 input lines CLVC139AQPWRG4Q1 ApplicationsThere are a lot of Texas Instruments CLVC139AQPWRG4Q1 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD3384DBR OverviewFor the purpose of saving board space, digital switch is included in the 24-SSOP (0.209, 5.30mm Width).It is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74CBTD series multiplexers.It is designed with 24 terminations as part of its basic configuration.Its logic switch base part number is 74CBTD3384 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic is configured with 24 pins.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In this signal multiplexer, there are 10 bits that are provided.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The switches package is packaged in a way which is consistent with TR.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility. SN74CBTD3384DBR FeaturesSupplied in the 24-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3384DBR ApplicationsThere are a lot of Texas Instruments SN74CBTD3384DBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74ACT139M OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tube.Surface Mount is the mounting method digital switch ic uses.Decoder/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers from the 74ACT series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.Its logic switch base part number is 74ACT139 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.The board is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the ACT family.Signal multiplexer consists of 4 bits.In order to maintain mux switch's normal operation, power is provided to 5V.There are 4 outputs designed for the operation of the turn signal switch.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.For the normal operation of the device, 2 circuits must be formed. CD74ACT139M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74ACT139M ApplicationsThere are a lot of Texas Instruments CD74ACT139M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3251DBR OverviewDue to the fact that it is provided in the 16-SSOP (0.209, 5.30mm Width), digital switch allows the board to be compacted.It is packaged according to the Cut Tape (CT) method.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74CBT series multiplexers.Its basic configuration includes terminations in the 16 range.Its logic switch base part number is 74CBT3251 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.A total of 16 pins are configured on this board.The mount is in Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer provides 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).For mux switch's normal operation, power supply 5V is provided.The turn signal switch operates with 8 outputs.Other Logic ICs is a category for the digital switch ics.It consumes 3μA current of multiplexer ic without external influences.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.It operates with a resistance of 7Ohm.Furthermore, the characteristics of TTL COMPATIBLE MUX/DMUX SWITCH have been improved.The mux switch configuration contains 1 elements.When 3μA is delivered to the load, stability of the multiplexers can be maintained. SN74CBT3251DBR FeaturesSupplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH Operating with the supply current of 3μA SN74CBT3251DBR ApplicationsThere are a lot of Texas Instruments SN74CBT3251DBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD3384CDBQR OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 24-SSOP (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.These multiplexers are members of the 74CBTD series, which provide extensive application potential.Among its basic features are 24 terminations.You can also find related parts by using its logic switch base part number of 74CBTD3384.In multiplexer's system, 5V is the voltage supplied.Signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.There is a supply type of Single employed as part of this supply.This multiplexer ic has 24 pins configured.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits provided.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.No external influence consumes 1.5mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches packaging is based on TR.As far as the resistance is concerned, it operates with 2.With a resistance of 20Ohm, it operates.There is an output current of 64mA that allows for greater switches' flexibility. SN74CBTD3384CDBQR FeaturesSupplied in the 24-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3384CDBQR ApplicationsThere are a lot of Texas Instruments SN74CBTD3384CDBQR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CB3Q6800DGVR OverviewThis is a relatively small item of digital switch that is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save space on the board.Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CB series, which provide extensive application potential.As parts of its basic configuration, 24 terminations are desgined.The base part number is 74CB3Q6800, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThis turn signal switch has 24 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.The board has 24 pins configured.This unit is mounted in the way of Surface Mount.The CB3Q/3VH/3C/2B family includes the logic switch.There are 10 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without any external influences, it consumes 2mA current of multiplexer ic at all times.The switches packaging is based on TR.A resistance of 2 governs its operation.This signal switching operates at a resistance of 9Ohm.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics.For increased switches' flexibility, the output current of 30mA is provided. SN74CB3Q6800DGVR FeaturesSupplied in the 24-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V ALSO OPERATES AT 3.3V SUPPLY SN74CB3Q6800DGVR ApplicationsThere are a lot of Texas Instruments SN74CB3Q6800DGVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3253PWR OverviewDue to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74CBT3253, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 16 is found on this turn signal switch.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.There are 8 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.There is a power supply provided for the mux switch's normal operation of 5V.In order for the turn signal switch to work, there are 4 outputs.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with TR.With a resistance of 15Ohm, it operates.A total of 2 transmission channels are available in the turn signal switch's circuit.The characteristics of TTL COMPATIBLE MUX/DMUX SWITCH are also improved.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA. SN74CBT3253PWR FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH Operating with the supply current of 3μA SN74CBT3253PWR ApplicationsThere are a lot of Texas Instruments SN74CBT3253PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CB3Q6800PWR OverviewIn order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CB series are suitable for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.In addition, it also has a base part number of 74CB3Q6800, which can be used to find related parts.For multiplexer's system, 2.5V voltage is supplied.In this turn signal switch, there are 24 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CB3Q/3VH/3C/2B family.In the signal multiplexer, there are 10 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Bus Driver/Transceivers is the classification for this the digital switch ic.No external influence consumes 2mA current of multiplexer ic.The switches is packaged according to the way of TR.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 9Ohm.It also provides improved characteristics of ALSO OPERATES AT 3.3V SUPPLY.There is an output current of 30mA that allows for greater switches' flexibility. SN74CB3Q6800PWR FeaturesSupplied in the 24-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V ALSO OPERATES AT 3.3V SUPPLY SN74CB3Q6800PWR ApplicationsThere are a lot of Texas Instruments SN74CB3Q6800PWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV157ADR OverviewProviding this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.Cut Tape (CT) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Multiplexer as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.In addition to being a member of the 74LV series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.In addition, it also has a base part number of 74LV157, which can be used to find related parts.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the LV/LV-A/LVX/H family.As a result, signal multiplexer provides a total of 2 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.During mux switch's normal operation, 3.3V is provided with a power supply.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.The switches package is packaged in a way which is consistent with TR.This turn signal switch's circuit is based on a circuit with 4 channels. SN74LV157ADR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LV157ADR ApplicationsThere are a lot of Texas Instruments SN74LV157ADR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTLV3126DR OverviewIt is included in the 14-SOIC (0.154, 3.90mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.As parts of its basic configuration, 14 terminations are desgined.Its logic switch base part number is 74CBTLV3126 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 2.5V volts.Currently, this turn signal switch has a total of 14 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.Currently, it is configured with 14 pins.The mounting is in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 10μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.The switches is packaged according to the way of TR.The system operates with a resistance of 2.A resistance of 7Ohm is used to operate the signal switching.The turn signal switch's circuit has 4 transmission channels.For greater switches' flexibility, the output current of 64mA is provided. SN74CBTLV3126DR FeaturesSupplied in the 14-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN74CBTLV3126DR ApplicationsThere are a lot of Texas Instruments SN74CBTLV3126DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTLV3251DGVR OverviewDue to the lack of space on the board, digital switch is provided in the 16-TFSOP (0.173, 4.40mm Width).It is packaged according to the Cut Tape (CT) method.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.3V~3.6V.provides digital controlled switch's digital controlled switch'sThese multiplexers are members of the 74CBTLV series, which provide extensive application potential.There are 16 terminations included in its basic configuration.The base part number is 74CBTLV3251, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.Single is employed as its supply type.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.In the CBTLV/3B family, the logic switch is included.Vsup should be kept at 2.3V to prevent some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.The turn signal switch contains 8 outputs designed to operate.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 10μA current.This multiplexer has a total of 8 inputs.The switches is packaged according to the way of TR.40Ohm is the resistance at which it operates.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.If the load is supplied with 10μA voltage, stability of the multiplexers can be maintained. SN74CBTLV3251DGVR FeaturesSupplied in the 16-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V Operating with the supply current of 10μA SN74CBTLV3251DGVR ApplicationsThere are a lot of Texas Instruments SN74CBTLV3251DGVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | <h3>SN74CBTLV3253PWR Overview</h3><div><br/>This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Cut Tape (CT) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 16 terminations.As its base part number is 74CBTLV3253, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 16 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.The mounting point is Surface Mount.There is a family of CBTLV/3B members.In the signal multiplexer, there are 2 bits available.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.The turn signal switch operates with 4 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.No external influence consumes 10μA current of multiplexer ic.There are 8 inputs provided in this multiplexer.The switches package is packaged in accordance with TR.The resistance of the signal switching is 40Ohm.When 10μA is delivered to the load, stability of the multiplexers can be maintained.<br/><br/></div><h3>SN74CBTLV3253PWR Features</h3><div><br/>Supplied in the 16-TSSOP (0.173, 4.40mm Width) package<br/>Adopting a supply type of Single<br/>Operating with the supply current of 10μA<br/><br/></div><h3>SN74CBTLV3253PWR Applications</h3><div><br/>There are a lot of Texas Instruments SN74CBTLV3253PWR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Microprocessor input/output systems<!--<li--></li><li>Automatic health monitoring systems<!--<li--></li><li>Data demultiplexing<!--<li--></li><li>Transmission from the computer system of a satellite<!--<li--></li><li>HDMI applications<!--<li--></li><li>RF-based home automation system<!--<li--></li><li>Analog, digital or video signal switching<!--<li--></li><li>Video transmission<!--<li--></li><li>Arithmetic Logic Units<!--<li--></li><li>Communication system<!--<li--></li></ul> |
2000
In-stock
|
Get Quote | |||
Ultralife | SN74LVC138APWT OverviewIn order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Tape & Reel (TR).Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.65V~3.6V, designers have superior flexibility.With the 74LVC series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.As its base part number is 74LVC138, logic switch can also be used to find its related parts.The multiplexer's system is powered by 1.8V voltage.This turn signal switch has 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.The LVC/LCX/Z family includes the logic switch.As a result, signal multiplexer provides 8 bits.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Without external influences, it consumes 10μA current of multiplexer ic.This multiplexer is equipped with 3 inputs and 3 outputs.The switches packaging is based on TR.In mux switch configuration, there are 1 elements. SN74LVC138APWT FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74LVC138APWT ApplicationsThere are a lot of Texas Instruments SN74LVC138APWT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS151DR OverviewIn order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.75V~5.25V voltage.Since they are members of the 74LS series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74LS151, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of LS the logic switch is a member.There are 16 bits signal multiplexer provides.It is provided that 5V has a power supply in order to function normally.The turn signal switch has 1 outputs designed for operation.Without the influence of external factors, it consumes 6mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches packaging is based on TR.For the purpose of accepting voltage levels, the multiplexers have 8 input lines. SN74LS151DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V 8 input lines SN74LS151DR ApplicationsThere are a lot of Texas Instruments SN74LS151DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3244DBQR OverviewProviding this information in the 20-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.It is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74CBT series, which provide extensive application potential.As parts of its basic configuration, 20 terminations are desgined.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 20 component pins.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.A total of 20 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 8 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 50μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.In accordance with TR, switches can be packaged.The resistance is 2.The resistance of the signal switching is 7Ohm.64mA provides a high degree of switches' flexibility. SN74CBT3244DBQR FeaturesSupplied in the 20-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3244DBQR ApplicationsThere are a lot of Texas Instruments SN74CBT3244DBQR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTLV3384DGVR OverviewFor the purpose of saving board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) is the packaging method.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBTLV series can be used in a wide range of applications.The basic configuration of this system includes 24 terminations.There is a base part number 74CBTLV3384 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 2.5V voltage.Signal switch has 24 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board is configured with 24 pins.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides 10 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches packaging is based on TR.This signal switching operates at a resistance of 2.7Ohm is the resistance at which it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current. SN74CBTLV3384DGVR FeaturesSupplied in the 24-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single SN74CBTLV3384DGVR ApplicationsThere are a lot of Texas Instruments SN74CBTLV3384DGVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CB3Q3305PWRG4 OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 8-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The multiplexers from 74CB series can be used for a wide range of applications.As part of its basic configuration, 8 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of 74CB3Q3305.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 8 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A configuration of 8 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The multiplexer ic provides 1 bits.Avoid unnecessary failures by keeping Vsup at 3.6V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 700μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.The signal switching operates with a resistance of 2.It operates with a resistance of 9Ohm.For transmission, there are 2 channels in the turn signal switch's circuit.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 3.3V SUPPLY.There is an output current of 30mA that allows for greater switches' flexibility. SN74CB3Q3305PWRG4 FeaturesSupplied in the 8-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single ALSO OPERATES WITH 3.3V SUPPLY SN74CB3Q3305PWRG4 ApplicationsThere are a lot of Texas Instruments SN74CB3Q3305PWRG4 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3257DBR OverviewIn order to conserve board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers from 74CBT series can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The part number for 74CBT3257 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.There are 16 pins on it.This unit is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In this signal multiplexer, there are 8 bits provided.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.This turn signal switch has 2 outputs designed for its operation.No external influence consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.Currently, the switches is packaged in accordance with the TR method.The system operates with a resistance of 15Ohm.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.It also provides improved characteristics of TTL COMPATIBLE MUX/DMUX SWITCH.Providing the load with a supply voltage of 3μA can maintain stability of the multiplexers. SN74CBT3257DBR FeaturesSupplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH Operating with the supply current of 3μA SN74CBT3257DBR ApplicationsThere are a lot of Texas Instruments SN74CBT3257DBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3253RGYR OverviewDue to the lack of space on the board, digital switch is provided in the 16-VFQFN Exposed Pad.As a result, it is packaged in a way that is referred to as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBT series can be used for a wide range of applications.Among its basic configurations are 16 terminations.As its base part number is 74CBT3253, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.A component pin count of 16 can be found on this turn signal switch.There is a type of supply of Single.A configuration of 16 pins is used.It is mounted in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.It is provided that 5V has a power supply in order to function normally.There are 4 outputs designed for the operation of the turn signal switch.Other Logic ICs is the classification for this the digital switch ic.It consumes 3μA current of multiplexer ic without external influences.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches packaging is based on TR.With a resistance of 10Ohm, it operates.The turn signal switch's circuit has 2 transmission channels.The characteristics of TTL COMPATIBLE MUX/DMUX SWITCH are also improved. SN74CBT3253RGYR FeaturesSupplied in the 16-VFQFN Exposed Pad package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH SN74CBT3253RGYR ApplicationsThere are a lot of Texas Instruments SN74CBT3253RGYR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3253DBQR OverviewDue to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74CBT3253, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.There are 16 pins on it.The mount is in Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer contains 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.There is a power supply provided for the mux switch's normal operation of 5V.As part of the operation of this turn signal switch, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.A resistance of 7Ohm is used to operate the signal switching.The turn signal switch's circuit has 2 transmission channels.In addition, it provides improved characteristics compared to TTL COMPATIBLE MUX/DMUX SWITCH.Stability of the multiplexers can be kept when the supply voltage of 3μA is delivered to the load. SN74CBT3253DBQR FeaturesSupplied in the 16-SSOP (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH Operating with the supply current of 3μA SN74CBT3253DBQR ApplicationsThere are a lot of Texas Instruments SN74CBT3253DBQR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3244DWR OverviewAs a means of saving space, digital switch is provided in the 20-SOIC (0.295, 7.50mm Width).The package is packaged in accordance with Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.Among its basic features are 20 terminations.Its logic switch base part number is 74CBT3244 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 20 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.Currently, it is configured with 20 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 8 bits that are provided.A power supply is provided for mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.No external influence consumes 50μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches is packaged according to the way of TR.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility. SN74CBT3244DWR FeaturesSupplied in the 20-SOIC (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3244DWR ApplicationsThere are a lot of Texas Instruments SN74CBT3244DWR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HC148DT OverviewIn order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Priority Encoder.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74HC series.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74HC148.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.A configuration of 16 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.The turn signal switch has 3 outputs designed for operation.Part number Arithmetic Circuits indicates that the digital switch ic is an electronic part.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 8 inputs and 8 outputs.The switches package is packaged in a way which is consistent with TR. SN74HC148DT FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC148DT ApplicationsThere are a lot of Texas Instruments SN74HC148DT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT3245ADGVR OverviewDue to the fact that it is provided in the 20-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 20 terminations.In addition, it also has a base part number of 74CBT3245, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides a total of 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.There are no external influences on this multiplexer ic, so it consumes 50μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA. SN74CBT3245ADGVR FeaturesSupplied in the 20-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT3245ADGVR ApplicationsThere are a lot of Texas Instruments SN74CBT3245ADGVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74AC251M96 OverviewDue to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74AC series multiplexers.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74AC251 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 3.3V voltage is supplied.Signal switch has 16 component pins.GULL WING represents the end of conductors.Single is used as its supply type.A total of 16 pins are configured on this board.The mounting point is Surface Mount.The logic switch is a member of the AC family.In the signal multiplexer, there are 8 bits available.Avoid unnecessary failures by keeping Vsup at 5.5V.For mux switch's normal operation, there is a power supply provided at 3.3/5V.There are 1 outputs designed to operate the turn signal switch.The multiplexer is equipped with 8 inputs.The switches is packaged according to the way of TR. CD74AC251M96 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3/5V CD74AC251M96 ApplicationsThere are a lot of Texas Instruments CD74AC251M96 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTLV3861DGVR OverviewIt is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in accordance with Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.As parts of its basic configuration, 24 terminations are desgined.As its base part number is 74CBTLV3861, logic switch can also be used to find its related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.A configuration of 24 pins is used.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer contains 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.mux switch's normal operation requires the power supply of 2.5/3.3V.Bus Driver/Transceivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 10μA current.According to TR, the switches is packaged.As far as the resistance is concerned, it operates with 2.A resistance of 40Ohm is used to operate it.Higher switches' flexibility is provided by providing 64mA as the output current. SN74CBTLV3861DGVR FeaturesSupplied in the 24-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V SN74CBTLV3861DGVR ApplicationsThere are a lot of Texas Instruments SN74CBTLV3861DGVR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74ACT153NSR OverviewThis is a relatively small item of digital switch that is included in the 16-SOIC (0.209, 5.30mm Width) in order to save space on the board.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74ACT series.Among its basic configurations are 16 terminations.The base part number is 74ACT153, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.This turn signal switch has a total of 16 component pins.A conductor terminates at GULL WING.Single is employed as its supply type.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the ACT family.In this signal multiplexer, there are 2 bits that are provided.Keeping Vsup at 4.5V will prevent some unwanted failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.It has 8 inputs.TR is used to package the switches.Voltage levels are accepted through 2 input lines of multiplexers. CD74ACT153NSR FeaturesSupplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V 2 input lines CD74ACT153NSR ApplicationsThere are a lot of Texas Instruments CD74ACT153NSR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.