Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Klein Tools, Inc. | STG3690QTR OverviewPresented in 16-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SPDT switching circuits. There are 4 circuits in this switch device. Search with STG3690 if you are looking for analog multiplexer variants. Analog switches have 1.5Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.65V as the lowest voltage for the electrical part. An operating current of 50nA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~3.6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 50nA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. STG3690QTR Features1 Channels Switch Circuit: SPDT 50nA Supply Current -3db Bandwidth: 50MHz STG3690QTR ApplicationsThere are a lot of STMicroelectronics STG3690QTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | 74V1T66CTR OverviewDue to its 5-TSSOP, SC-70-5, SOT-353 packaging, the electronic part is convenient for international shipping. Advanced packaging method Cut Tape (CT) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. The total number of terminations is 5. Due to its 1 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 5 pins is performed into the body of the electrical component. Try searching for 74V1T66 variants of the analog switch ic. A 10Ohm internal resistance characterizes this multiplexer. You can find the functions of the 5 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. The analogue multiplexer may be damaged if voltage is greater than 1μA. A 1 input needs to be operated. In an environment with a temperature higher than 125°C, the digital switches should not operate. This is electronic component of the 74V series. 74V1T66CTR Features1 Channels 74V1T66CTR ApplicationsThere are a lot of STMicroelectronics 74V1T66CTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | STG3699AQTR OverviewShipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 2.7V, it should be turned on and run. An electrical component of this type can be found in the 16 series. Based on SPDT switching circuits, these analog multiplexers work. Try searching for the analog switch ic with STG3699 if you are looking for variants. It has an internal resistance of 45mOhm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 4.3V in normal situations. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. It would be sufficient to run this analogue multiplexer with 50nA current. This analog switch requires a voltage of 1.65V~4.3V to drain from a single voltage supply. If put voltage greater than 50nA on the device, damage may be caused to the analogue multiplexer. Operating voltages of 3V are compatible with the electrical part. This electronic part has additional features, such as: 2-CHANNEL MUX/DEMUX. Multiplexer ics with 8 outputs are available. STG3699AQTR Features4 Channels Switch Circuit: SPDT 50nA Supply Current -3db Bandwidth: 50MHz Additional Features: 2-CHANNEL MUX/DEMUX STG3699AQTR ApplicationsThere are a lot of STMicroelectronics STG3699AQTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC1G66YEPR OverviewShipping overseas is convenient with the electronic component packed in 5-XFBGA, DSBGA. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 5 terminations. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPST - NO switching circuits. There are 1 circuits in this switch device. Try searching with 74LVC1G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. To find out what the 5 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. For this digital switch to work, 10μA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. SN74LVC1G66YEPR Features1 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 300MHz SN74LVC1G66YEPR ApplicationsThere are a lot of Texas Instruments SN74LVC1G66YEPR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC4851B1R OverviewPacked in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -55°C~125°C TA. This multiplexer is composed of 1 circuits. Try searching with M74HC48 to find analog multiplexer variants. This digital multiplexer has 650Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Users should never supply a voltage higher than 6V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. There is a 16-DIP package offered by suppliers. M74HC4851B1R FeaturesM74HC4851B1R ApplicationsThere are a lot of STMicroelectronics M74HC4851B1R Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC4053B1R OverviewThis electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. A 2 channel electronic part produces high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching with M74HC405 if you're looking for variants. There is 180Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analog switch ics with Dual supply type are cost-effective. A low voltage of 2V should be applied to the electronic component. The switch device would be able to operate with 8μA current. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 1V should be attached. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. It is possible to operate 6 inputs. The transfer of data can be performed over 200MHz bandwidths. There is 180Ohm Drain to Source resistance on this electronic part. M74HC4053B1R Features2 Channels Switch Circuit: SPDT 8μA Supply Current Bandwidth: 200MHz Drain-to-Source resistance: 180Ohm M74HC4053B1R ApplicationsThere are a lot of STMicroelectronics M74HC4053B1R Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
7930
In-stock
|
Get Quote | ||||
MG Chemicals | NX3L1G3157GM-Q100X OverviewShipping overseas is convenient due to the electrical component's packing in 6-XFDFN. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with NX3L1G3157. The voltage required by this switch device is 1.4V~4.3V, draining from a single voltage supply. Automotive, AEC-Q100 is a series number. NX3L1G3157GM-Q100X FeaturesSwitch Circuit: SPDT -3db Bandwidth: 60MHz NX3L1G3157GM-Q100X ApplicationsThere are a lot of NXP USA Inc. NX3L1G3157GM-Q100X Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | MAX4596DBVR OverviewShipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there are 5 terminations. A high-quality output is provided by the electrical component's 1 channels. A 3V voltage supply should turn on and run the electronic component. A total of 5 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching with MAX4596 to find analog multiplexer variants. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the 5 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2V. For this multiplexer to operate, 1μA current would be sufficient. This analog switch requires a voltage of 2.4V~5.5V to drain from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. This switch operates within the bandwidth of 300MHz. MAX4596DBVR Features1 Channels Switch Circuit: SPST - NO 1μA Supply Current Bandwidth: 300MHz MAX4596DBVR ApplicationsThere are a lot of Texas Instruments MAX4596DBVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
127
In-stock
|
Get Quote | ||||
Ultralife | CD4053BMT OverviewShipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -55°C~125°C TA. In total, 16 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. The analog switch ics are built using SPDT switching circuits. A 3 circuit is present in this switch device. Try searching for the analog switch ic with CD4053 if you are looking for variants. This digital multiplexer has 1.05kOhm internal resistance. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 3V. This multiplexer would work with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 9V. The voltage should be at least 2.5V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electronic component can function from 18V. A 6 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 30MHz bandwidths. CD4053BMT Features2 Channels Switch Circuit: SPDT 80nA Supply Current Bandwidth: 30MHz CD4053BMT ApplicationsThere are a lot of Texas Instruments CD4053BMT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
7127
In-stock
|
Get Quote | ||||
Ultralife | MAX4594DCKR OverviewShipping overseas is convenient with the electronic component packed in 5-TSSOP, SC-70-5, SOT-353. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. In total, 5 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 5 pins injected into the electronic part body. A SPST - NO switching circuit is used for these analog switches. If you are looking for variants of the digital switch, trying search with MAX4594. In this multiplexer, the internal resistance is 10Ohm. To find out what the 5 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. The switch device would be able to operate with 1μA current. This analog switch requires a voltage of 2.4V~5.5V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. MAX4594DCKR Features1 Channels Switch Circuit: SPST - NO 1μA Supply Current Bandwidth: 300MHz MAX4594DCKR ApplicationsThere are a lot of Texas Instruments MAX4594DCKR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TS3A5017DBQR OverviewDue to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SP4T switching circuits. There are 2 circuits in this switch device. Search with TS3A5017 if you are looking for analog multiplexer variants. There is 12Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2.3V as the lowest voltage for the electrical part. 2.5μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~3.6V. Putting voltage greater than 7μA on the multiplexer may cause damage. There are 165MHz bandwidths for data transfer. The analogue multiplexer has 8 outputs. TS3A5017DBQR Features4 Channels Switch Circuit: SP4T 2.5μA Supply Current Bandwidth: 165MHz TS3A5017DBQR ApplicationsThere are a lot of Texas Instruments TS3A5017DBQR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT4067QM96Q1 OverviewDue to its 24-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operation at a temperature around -40°C~125°C TA. 24 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with 74HCT4067 if you are looking for variants. A 180Ohm internal resistance characterizes this multiplexer. To find out what the 24 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. This electrical part is compatible with 5V operating voltages. Operating 16 inputs is required. In 89MHz-bandwidths, data can be transferred. The Automotive, AEC-Q100 series includes it. CD74HCT4067QM96Q1 Features1 Channels -3db Bandwidth: 89MHz Bandwidth: 89MHz CD74HCT4067QM96Q1 ApplicationsThere are a lot of Texas Instruments CD74HCT4067QM96Q1 Analog Switches & Multiplexers ICs applications.
|
5882
In-stock
|
Get Quote | |||
MG Chemicals | NX3DV3899HR,115 OverviewThe electrical component comes in 16-XFQFN Exposed Pad packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:2. Operational temperature extended around -40°C~125°C TA. Total terminations are 16. The electronic part body is injected with 16 pins. Based on DPDT switching circuits, these analog multiplexers work. It consists of 2 circuits. Try searching with NX3DV3899 if you're looking for variants. This switch device is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 1.4V~4.3V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. NX3DV3899HR,115 FeaturesSwitch Circuit: DPDT -3db Bandwidth: 200MHz NX3DV3899HR,115 ApplicationsThere are a lot of NXP USA Inc. NX3DV3899HR,115 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TS5A3357QDCURQ1 OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 3:1. Increasing operating temperature to around -40°C~125°C TA. A total of 8 terminations have been recorded. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A total of 8 pins are injected into the body of the electronic part. These analog multiplexers are built based on SP3T switching circuits. Look for analog switch ic variants by searching with TS5A3357. Internally, this switch multiplexer has a resistance of 15Ohm. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.65V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. When the digital multiplexer is charged above 10μA, damage can occur. In order to operate the 1 inputs, there are several steps to follow. The transfer of data can be performed over 334MHz bandwidths. There are 3 outputs on the analogue multiplexer. From the Automotive, AEC-Q100 series. TS5A3357QDCURQ1 Features1 Channels Switch Circuit: SP3T 1μA Supply Current Bandwidth: 334MHz TS5A3357QDCURQ1 ApplicationsThere are a lot of Texas Instruments TS5A3357QDCURQ1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TS3DS26227YZTR OverviewShipping overseas is convenient due to the electrical component's packing in 12-UFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 12 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 12 pins. A SPDT switching circuit is used to build these analog multiplexers. Using the TS3DS26227 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 5Ohm. Please refer to the datasheets for 12 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. 1μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 2.3V~3.6V volts. The analogue multiplexer may be damaged if voltage is greater than 20nA. There are 2 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 800MHz bandwidths. Don't miss this electronic component's additional features, such as: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V. There are 4 outputs on the analogue multiplexer. TS3DS26227YZTR Features1 Channels Switch Circuit: SPDT 1μA Supply Current -3db Bandwidth: 80MHz Bandwidth: 800MHz Additional Features: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V TS3DS26227YZTR ApplicationsThere are a lot of Texas Instruments TS3DS26227YZTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV4066ADGVR OverviewThe electrical component comes in 14-TFSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 14. A high-quality output is provided by the electrical component's 4 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 14 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for the analog switch ic with 74LV4066 if you are looking for variants. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. Datasheets for 14 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. It is recommended to use 2V as the lowest voltage for the electrical part. 20μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 20μA on the digital multiplexer, damage may occur. There are SEPARATE OUTPUT outputs on this analog switch ic. The transfer of data can be performed over 50MHz bandwidths. SN74LV4066ADGVR Features4 Channels Switch Circuit: SPST - NO 20μA Supply Current Bandwidth: 50MHz SN74LV4066ADGVR ApplicationsThere are a lot of Texas Instruments SN74LV4066ADGVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV4066ADR OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). Advanced packaging method Cut Tape (CT) is used to provide high reliability. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. A total of 14 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. A total of 14 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with 74LV4066 if you're looking for variants. It has an internal resistance of 75Ohm. For functions related to 14 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. There should be 2V voltage fed to the electrical part below 2V. In order to operate this switch device, it would need a current of 20μA. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. If you put voltage higher than 20μA on the digital multiplexer, damage may occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In 50MHz-bandwidths, data can be transferred. SN74LV4066ADR Features4 Channels Switch Circuit: SPST - NO 20μA Supply Current Bandwidth: 50MHz SN74LV4066ADR ApplicationsThere are a lot of Texas Instruments SN74LV4066ADR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | STG6384QTR OverviewPresented in 10-UFQFN, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 10 terminations totally. This electronic part offers high-quality output due to its 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 10 series. These analog multiplexers are built based on SPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. Use STG5684 to search for variants of the digital switches. In this multiplexer, the internal resistance is 10mOhm. Datasheets for functions of 10 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. 50nA current would be enough for this multiplexer to operate. The voltage required by this switch device is 1.65V~4.3V, draining from a single voltage supply. When the digital multiplexer is charged above 50nA, damage can occur. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. STG6384QTR Features1 Channels Switch Circuit: SPST - NO 50nA Supply Current -3db Bandwidth: 65MHz STG6384QTR ApplicationsThere are a lot of STMicroelectronics STG6384QTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TMUX1072RUTR OverviewThis electronic part is conveniently packaged in 12-UFQFN, making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C extended. Total terminations are 12. A high-quality output is provided by the electrical component's 1 channels. These analog multiplexers are built based on SPDT switching circuits. 2 circuits are used in this analogue multiplexer. TMUX1072 can be used to search for analog multiplexer variants. Analogue multiplexers require a 2.3V~5.5V voltage to drain from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. 1200MHz-bandwidths can be used to transfer data between multiplexers. TMUX1072RUTR Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 1.2GHz Bandwidth: 1200MHz TMUX1072RUTR ApplicationsThere are a lot of Texas Instruments TMUX1072RUTR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TS3A27518EIPWRQ1 OverviewDue to its 24-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 2 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. It is part of the design of the 24 series that this electronic component is included. A SPDT switching circuit is used for these analog switches. Use TS3A27518 to search for variants of the digital switches. It has an internal resistance of 6.2Ohm. Datasheets for functions of 24 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 40nA current. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. The 6 inputs need to be operated in order to work. There are 240MHz bandwidths for data transfer. In this digital multiplexer, there are 12 outputs. This is one of the Automotive, AEC-Q100 series. TS3A27518EIPWRQ1 Features2 Channels Switch Circuit: SPDT 40nA Supply Current Bandwidth: 240MHz TS3A27518EIPWRQ1 ApplicationsThere are a lot of Texas Instruments TS3A27518EIPWRQ1 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TMUX1102DBVR OverviewShipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. In total, 6 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. The analog switch ics are built using SPST switching circuits. There are 1 circuits in this multiplexer. Try searching with TMUX1102 if you're looking for variants. 300MHz-bandwidths can be used to transfer data between multiplexers. TMUX1102DBVR Features1 Channels Switch Circuit: SPST -3db Bandwidth: 300MHz Bandwidth: 300MHz TMUX1102DBVR ApplicationsThere are a lot of Texas Instruments TMUX1102DBVR Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | CBTV24DD12ETY OverviewThe electronic component is convenient to ship overseas because it is packed in a 48-TFBGA. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -10°C~85°C TA are extended for operation. A key feature of the 48 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. There are 12 circuits in this switch device. Using a single voltage supply, this switch device consumes 1.62V~3.63V volts. CBTV24DD12ETY FeaturesSwitch Circuit: SPDT -3db Bandwidth: 7.4GHz CBTV24DD12ETY ApplicationsThere are a lot of NXP USA Inc. CBTV24DD12ETY Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV4052ATPWREP OverviewThe electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~105°C TA degrees Celsius. In total, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with 74LV4052. Internally, this switch multiplexer has a resistance of 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 20μA current would suffice. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In order to operate the 8 inputs, there are several steps to follow. In 50MHz-bandwidths, data can be transferred. SN74LV4052ATPWREP Features4 Channels Switch Circuit: SP4T 20μA Supply Current Bandwidth: 50MHz SN74LV4052ATPWREP ApplicationsThere are a lot of Texas Instruments SN74LV4052ATPWREP Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HC4066PWT OverviewThe electrical component comes in 14-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An injection of 14 pins is performed into the body of the electrical component. SPST - NO switching circuits are used in these analog switch ics. Try searching with 74HC4066 to find analog multiplexer variants. Analog switches have 30Ohm internal resistance. Datasheets for 14 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. An effective Single supply digital multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 2μA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. Put voltage above 2μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There is a voltage range of 5V operating voltages for the electrical part. A 30MHz-bandwidth can be used for data transfer. SN74HC4066PWT Features4 Channels Switch Circuit: SPST - NO 2μA Supply Current Bandwidth: 30MHz SN74HC4066PWT ApplicationsThere are a lot of Texas Instruments SN74HC4066PWT Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC1G3157DCK3 OverviewThe electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 6. The electronic part delivers high-quality output through its 1 channels. A SPDT switching circuit is used for these analog switches. A total of 1 circuits make up this switch device. Using the 74LVC1G3157 search parameter, you can discover variants of the switch. To find out what the 6 pins do, please refer to the datasheets. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. 340MHz-bandwidths can be used to transfer data between multiplexers. SN74LVC1G3157DCK3 Features1 Channels Switch Circuit: SPDT -3db Bandwidth: 340MHz Bandwidth: 340MHz SN74LVC1G3157DCK3 ApplicationsThere are a lot of Texas Instruments SN74LVC1G3157DCK3 Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD4052BPW OverviewPacked in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. Try searching with CD4052 to find analog multiplexer variants. It has an internal resistance of 240Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexers should not be powered above 20V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 80nA current. If put voltage greater than 9V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 2.5V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 18V are compatible with the electrical part. Among the inputs that can be operated are the 8 inputs. It is possible to transfer data over a 25MHz-bandwidth. 4-bit operation is possible. CD4052BPW Features4 Channels Switch Circuit: SP4T 80nA Supply Current Bandwidth: 25MHz 4-Bit CD4052BPW ApplicationsThere are a lot of Texas Instruments CD4052BPW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HC4852PW OverviewThe electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with 74HC4852 if you are looking for variants. Analog switches have 650Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 2μA. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. It is possible to operate 8 inputs. This digital multiplexer has 4 outputs. 4-bit operation is possible. SN74HC4852PW FeaturesSwitch Circuit: SP4T 2μA Supply Current 4-Bit SN74HC4852PW ApplicationsThere are a lot of Texas Instruments SN74HC4852PW Analog Switches & Multiplexers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.