Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | SN74ALS841DWR OverviewIt is embedded in the 24-SOIC (0.295, 7.50mm Width) package. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. It is a type of FPGA belonging to the 74ALS series. The design of this electronic part is based on 10 bits. In this device, there are 24 terminations that have been designed. 74ALS841 is its family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 24 pins. This electronic device belongs to the family of ALS. This board has 24 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. In the subcategory FF/Latches, this part belongs. On the basis of its reliability, this device is well suited for TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 10 output lines. There are 1 elements in it. There are also other characteristics of it, such as POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION. SN74ALS841DWR Features24-SOIC (0.295, 7.50mm Width) package 74ALS series 10 Bits 74ALS841 family 24 pin count 24 pins 1 elements SN74ALS841DWR ApplicationsThere are a lot of Texas Instruments SN74ALS841DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS873BNT OverviewIn the package 24-DIP (0.300, 7.62mm), it can be found. The package is in the form of Tube. Tri-State is used for the output it is configured with. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It is 0°C~70°C at the operating temperature. It is a type of FPGA belonging to the 74ALS series. 4 Bits are used in the design of this electronic part. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74ALS873. With a supply voltage of 5V, it operates. 24 pins are included. There is a device in this electronic family called ALS. There are 24 pins on it. The electronic part is mounted using the Through Hole method. This device has 2 ports on board, which are all available at the same time. This part can be found within the Bus Driver/Transceiver subcategory. There are 5V power supplies attached to it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As the output current is 24mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 5V. There is also WITH CLEAR characteristics to it. SN74ALS873BNT Features24-DIP (0.300, 7.62mm) package 74ALS series 4 Bits 74ALS873 family 24 pin count 24 pins 5V power supplies SN74ALS873BNT ApplicationsThere are a lot of Texas Instruments SN74ALS873BNT Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS533ADWR OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tape & Reel (TR) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device is designed with 20 terminations. The family it belongs to is 74ALS533. With the supply voltage set at 5V, it is able to operate. The 20 pind are equipped with it. It is part of the family of electronic devices called ALS. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. With 24mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage. SN74ALS533ADWR Features20-SOIC (0.295, 7.50mm Width) package 74ALS series 8 Bits 74ALS533 family 20 pin count 20 pins 5V power supplies SN74ALS533ADWR ApplicationsThere are a lot of Texas Instruments SN74ALS533ADWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS994NT Overview24-DIP (0.300, 7.62mm) contains it. A Tube package is used to package it. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is 0°C~70°C. The 74ALS series contains FPGAs of this type. The electronic part in this image has 10 bits. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ALS994 is its family. It operates with a supply voltage of 5V. 24 pins are available on it. There is a device in this electronic family called ALS. This board has 24 pins on it, which is what it is designed for. A Through Hole mounting method has been used for this electronic part. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. As the output current is 24mA, the design flexibility is maximum. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It follows that 10 output lines are generated from the binary equivalent of the input line. This object is composed of 1 elements. In addition, WITH READ-BACK characterize it. SN74ALS994NT Features24-DIP (0.300, 7.62mm) package 74ALS series 10 Bits 74ALS994 family 24 pin count 24 pins 5V power supplies 1 elements SN74ALS994NT ApplicationsThere are a lot of Texas Instruments SN74ALS994NT Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS992NTG4 OverviewIn the package 24-DIP (0.300, 7.62mm), it can be found. The package is in the form of Tube. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Through Hole, this electronic part is mounted. There is no supply voltage for this device. A temperature of 0°C~70°C is used for operation. 74ALS is the series number of this FPGA. This type belongs to the 74ALS992 family. SN74ALS992NTG4 Features24-DIP (0.300, 7.62mm) package 74ALS series 74ALS992 family SN74ALS992NTG4 ApplicationsThere are a lot of Texas Instruments SN74ALS992NTG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT373DBR OverviewA package called 20-SSOP (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74BCT373 family. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. It is a member of the BCT/FBT family of electronic devices. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. There are 8 input lines in which electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. SN74BCT373DBR Features20-SSOP (0.209, 5.30mm Width) package 74BCT series 8 Bits 74BCT373 family 20 pin count 20 pins 5V power supplies SN74BCT373DBR ApplicationsThere are a lot of Texas Instruments SN74BCT373DBR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT573NSRE4 OverviewIn the package 20-SOIC (0.209, 5.30mm Width), it can be found. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at 0°C~70°C degrees Celsius. The 74BCT series contains FPGAs of this type. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74BCT573 is the family name of it. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. BCT/FBT is the family of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. 5V power supplies are needed to operate it. (Vsup) should be greater than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL. The 64mA output current gives it maximum design flexibility. SN74BCT573NSRE4 Features20-SOIC (0.209, 5.30mm Width) package 74BCT series 8 Bits 74BCT573 family 20 pin count 20 pins 5V power supplies SN74BCT573NSRE4 ApplicationsThere are a lot of Texas Instruments SN74BCT573NSRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT29843DWRE4 OverviewA package called 24-SOIC (0.295, 7.50mm Width) contains it. A Tape & Reel (TR) package is used to package it. Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. The 74BCT series contains FPGAs of this type. The design of this electronic part is based on 9 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74BCT29843 family. With a supply voltage of 5V, it operates. 24 pins are provided. In the world of electronics, this electronic device belongs to the family of BCT/FBT. With the design of the board, there are only 24 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. It reaches a maximum supply voltage (Vsup) of 5.5V. There is 5V power supply for it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. An electronic circuit can be found on 9 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. It also has characteristics of WITH CLEAR AND PRESET. As its maximal power current (ICC) reaches 35mA, it is able to operate. SN74BCT29843DWRE4 Features24-SOIC (0.295, 7.50mm Width) package 74BCT series 9 Bits 74BCT29843 family 24 pin count 24 pins 5V power supplies SN74BCT29843DWRE4 ApplicationsThere are a lot of Texas Instruments SN74BCT29843DWRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AS573ADWRE4 OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. It is configured with an output of Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is set as the operating temperature. An FPGA of this type belongs to the 74AS series. 8 Bits are used in the design of this electronic part. This device has 20 terminations. 74AS573 is its family. In order to function, the supply voltage should be set to 5V. 20 pins are included. AS is the family name of this electronic device. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. Subcategory FF/Latches contains this part. The maximal supply voltage (Vsup) reaches 5.5V. The system is powered by 5V sources. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. Electronic circuits are represented by 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. As the output current is 48mA, the design flexibility is maximum. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. As its maximal power current (ICC) reaches 93mA, it is able to operate. SN74AS573ADWRE4 Features20-SOIC (0.295, 7.50mm Width) package 74AS series 8 Bits 74AS573 family 20 pin count 20 pins 5V power supplies SN74AS573ADWRE4 ApplicationsThere are a lot of Texas Instruments SN74AS573ADWRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT29843NTG4 OverviewThere is an embedded version of it in package 24-DIP (0.300, 7.62mm). Tube is the way in which it is packaged. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Through Hole. It operates at a voltage of 4.5V~5.5V. There is 0°C~70°C operating temperature. The 74BCT series of FPGAs is the one this FPGA belongs to. 74BCT29843 is its family. SN74BCT29843NTG4 Features24-DIP (0.300, 7.62mm) package 74BCT series 74BCT29843 family SN74BCT29843NTG4 ApplicationsThere are a lot of Texas Instruments SN74BCT29843NTG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS994DW OverviewIn the package 24-SOIC (0.295, 7.50mm Width), it can be found. Tube is the packaging method. Tri-State is used for the output it is configured with. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. 10 Bits are used in the design of this electronic part. In this device, there are 24 terminations that have been designed. The family in which it belongs to is 74ALS994. The supply voltage of the device is 5V. The 24 pind are equipped with it. In terms of electronic devices, this one is in the ALS family. With the design of the board, there are only 24 pins. Surface Mount is the method used for mounting this electronic part. It belongs to the subcategory of FF/Latches. 5V power supplies are needed to operate it. The 24mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. 10 output lines generate the binary equivalent of the input lines. There are 1 elements in it. WITH READ-BACK are other characteristics of it. SN74ALS994DW Features24-SOIC (0.295, 7.50mm Width) package 74ALS series 10 Bits 74ALS994 family 24 pin count 24 pins 5V power supplies 1 elements SN74ALS994DW ApplicationsThere are a lot of Texas Instruments SN74ALS994DW Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT29843DWR OverviewThe package in which it is embedded is named 24-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. The 74BCT series is associated with this FPGA. There are 9 bits in this electronic part. This device has 24 terminations. There is no doubt that it belongs to the family 74BCT29843. The supply voltage of the device is 5V. 24 pins are included. It is a member of the BCT/FBT family of electronic devices. With the design of the board, there are only 24 pins. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. The device is powered by 5V power supplies. Based on its reliable performance, this device is suitable for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 9 output lines. It consists of 1 elements. There are also other characteristics of it, such as WITH CLEAR AND PRESET. In order to operate properly, its maximum power current (ICC) should be 35mA. SN74BCT29843DWR Features24-SOIC (0.295, 7.50mm Width) package 74BCT series 9 Bits 74BCT29843 family 24 pin count 24 pins 5V power supplies 1 elements SN74BCT29843DWR ApplicationsThere are a lot of Texas Instruments SN74BCT29843DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC373PWRG4 OverviewThere is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). A Tape & Reel (TR) package is used to package it. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 2V~6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74HC series. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74HC373. In order to operate it, the supply voltage must be 5V. With 20 pins, it is equipped. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. 6V is the maximum voltage (Vsup) that can be supplied. There is 2/6V power supply for it. The supply voltage (Vsup) should be greater than 2V. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TR. With 7.8mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage. SN74HC373PWRG4 Features20-TSSOP (0.173, 4.40mm Width) package 74HC series 8 Bits 74HC373 family 20 pin count 20 pins 2/6V power supplies SN74HC373PWRG4 ApplicationsThere are a lot of Texas Instruments SN74HC373PWRG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ABT533ADWRE4 OverviewThere is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). This package has the format of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74ABT family. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. As a member of the 74ABT533 family, it falls under that category. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is a member of the ABT family of electronic devices. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. The device is powered by 5V power supplies. A supply voltage (Vsup) greater than 4.5V is required. Electronic circuits are represented by 8 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. Maximum power supply (ICC) for its operation is 30mA. SN74ABT533ADWRE4 Features20-SOIC (0.295, 7.50mm Width) package 74ABT series 8 Bits 74ABT533 family 20 pin count 20 pins 5V power supplies SN74ABT533ADWRE4 ApplicationsThere are a lot of Texas Instruments SN74ABT533ADWRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74F2373NG4 OverviewIt is embedded in the 20-DIP (0.300, 7.62mm) package. It is packaged in the way of Tube. The output it is configured with uses Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Through Hole. It operates at a voltage of 4.5V~5.5V. The temperature at which the machine is operating is 0°C~70°C. 74F is the series number of this FPGA. It belongs to 74F2373 family. SN74F2373NG4 Features20-DIP (0.300, 7.62mm) package 74F series 74F2373 family SN74F2373NG4 ApplicationsThere are a lot of Texas Instruments SN74F2373NG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74F2373DWRE4 OverviewA package called 20-SOIC (0.295, 7.50mm Width) contains it. A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. An FPGA of this type belongs to the 74F series. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74F2373 is its family. It operates with a supply voltage of 5V. There are 20 pins on it. It is part of the family of electronic devices called F/FAST. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 5.5V. There is 5V power supply for it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. On the basis of its reliability, this device is well suited for TAPE AND REEL. The output current of 12mA makes it feature maximum design flexibility. A binary equivalent of the input line is generated by the 8 output lines. SN74F2373DWRE4 Features20-SOIC (0.295, 7.50mm Width) package 74F series 8 Bits 74F2373 family 20 pin count 20 pins 5V power supplies SN74F2373DWRE4 ApplicationsThere are a lot of Texas Instruments SN74F2373DWRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AC533NSR OverviewIn the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A Tape & Reel (TR) package is used to package it. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The voltage supply is 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. The 74AC series contains FPGAs of this type. An electronic part with 8 bits is designed. This device has 20 terminations. It belongs to 74AC533 family. The device is operated when the supply voltage is set to 3.3V. 20 pins are provided. AC is the family name of this electronic device. There are 20 pins on it. Surface Mount is the way in which this electronic part is mounted. 2 ports are available on this device. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. There are 3.3/5V power supplies attached to it. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. There are electronic circuits attached to the 8 input lines. The device's reliable performance makes it a good choice for TAPE AND REEL. The 24mA output current gives it maximum design flexibility. SN74AC533NSR Features20-SOIC (0.209, 5.30mm Width) package 74AC series 8 Bits 74AC533 family 20 pin count 20 pins 3.3/5V power supplies SN74AC533NSR ApplicationsThere are a lot of Texas Instruments SN74AC533NSR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74F2373DBR OverviewThe 20-SSOP (0.209, 5.30mm Width) package contains it. As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic components are mounted using the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of 0°C~70°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. An electronic part with 8 bits is designed. This device has 20 terminations. It is a member of the 74F2373 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. It is a member of the F/FAST family of electronic devices. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 5V power supplies are needed to run it. The supply voltage (Vsup) should be greater than 4.5V. Electronic circuits comprise 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. SN74F2373DBR Features20-SSOP (0.209, 5.30mm Width) package 74F series 8 Bits 74F2373 family 20 pin count 20 pins 5V power supplies SN74F2373DBR ApplicationsThere are a lot of Texas Instruments SN74F2373DBR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74BCT373DBRE4 OverviewIn the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. As a result, it has a packaging of Tape & Reel (TR). In its configuration, Tri-State is used as the output. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at 0°C~70°C. This FPGA is part of the 74BCT series. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74BCT373 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. In terms of electronic devices, this one is in the BCT/FBT family. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum supply voltage (Vsup). The system is powered by 5V sources. The supply voltage (Vsup) should be greater than 4.5V. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. SN74BCT373DBRE4 Features20-SSOP (0.209, 5.30mm Width) package 74BCT series 8 Bits 74BCT373 family 20 pin count 20 pins 5V power supplies SN74BCT373DBRE4 ApplicationsThere are a lot of Texas Instruments SN74BCT373DBRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AC533NSRE4 OverviewIn the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. A 2V~6V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. 74AC is the series number of this FPGA. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74AC533 family. The device works with a voltage of 3.3V for its supply voltage. There are 20 pins on it. It is a member of the AC family of electronic devices. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 6V. 3.3/5V power supplies are needed to operate it. (Vsup) should be greater than 2V. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility. SN74AC533NSRE4 Features20-SOIC (0.209, 5.30mm Width) package 74AC series 8 Bits 74AC533 family 20 pin count 20 pins 3.3/5V power supplies SN74AC533NSRE4 ApplicationsThere are a lot of Texas Instruments SN74AC533NSRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ACT533DBRE4 OverviewThe 20-SSOP (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the way it is packaged. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. An FPGA in this series belongs to the 74ACT family. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. 74ACT533 is its family. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. It is a member of the ACT family of electronic devices. It is designed with 20 pins. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. There are 5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility. SN74ACT533DBRE4 Features20-SSOP (0.209, 5.30mm Width) package 74ACT series 8 Bits 74ACT533 family 20 pin count 20 pins 5V power supplies SN74ACT533DBRE4 ApplicationsThere are a lot of Texas Instruments SN74ACT533DBRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ABT533APWE4 OverviewIn the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tube is the way in which it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -40°C~85°C. In the 74ABT series, this FPGA is located. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. The family 74ABT533 includes it. The device is operated when the supply voltage is set to 5V. The device is equipped with 20 pins. There is a device in this electronic family called ABT. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. There is 5V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 30mA. SN74ABT533APWE4 Features20-TSSOP (0.173, 4.40mm Width) package 74ABT series 8 Bits 74ABT533 family 20 pin count 20 pins 5V power supplies SN74ABT533APWE4 ApplicationsThere are a lot of Texas Instruments SN74ABT533APWE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ABT843NSRE4 OverviewThe 24-SOIC (0.209, 5.30mm Width) package contains it. This package has the format of Tape & Reel (TR). The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. This FPGA is part of the 74ABT series. It is designed with 9 bits. As far as this device is concerned, it has no terminations. It is a member of the 74ABT843 family. It operates with a supply voltage of 5V. 24 pins are provided. In the world of electronics, this electronic device belongs to the family of ABT. There are 24 pins on it. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. This part is included in FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. 5V power supplies are needed to operate it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. This device is well suited for TAPE AND REEL based on its reliable performance. In order to operate properly, its maximum power current (ICC) should be 34mA. SN74ABT843NSRE4 Features24-SOIC (0.209, 5.30mm Width) package 74ABT series 9 Bits 74ABT843 family 24 pin count 24 pins 5V power supplies SN74ABT843NSRE4 ApplicationsThere are a lot of Texas Instruments SN74ABT843NSRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC573ADWG4 OverviewA package called 20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. The 74HC series is associated with this FPGA. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74HC573. With a supply voltage of 5V, it operates. It has 20 pins that makes it easy to use. This electronic device is categorized as a HC/UH electronic device. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. It reaches a maximum supply voltage (Vsup) of 6V. There is 2/6V power supply for it. It is recommended that the supply voltage (Vsup) be greater than 2V. Electronic circuits are represented by 8 input lines. The output current of 7.8mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. SN74HC573ADWG4 Features20-SOIC (0.295, 7.50mm Width) package 74HC series 8 Bits 74HC573 family 20 pin count 20 pins 2/6V power supplies SN74HC573ADWG4 ApplicationsThere are a lot of Texas Instruments SN74HC573ADWG4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS375NSRE4 OverviewIt is embedded in the 16-SOIC (0.209, 5.30mm Width) package. As a result, it has a packaging of Tape & Reel (TR). Differential is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.75V~5.25V supply voltage is required to operate it. The temperature at which the machine is operating is 0°C~70°C. The 74LS series of FPGAs is the one this FPGA belongs to. An electronic part with 2 bits is designed. A device such as this has 16 terminations designed. This type belongs to the 74LS375 family. A 5V voltage supply is required for operation. The 16 pind are equipped with it. It is a member of the LS family of electronic devices. With the design of the board, there are only 16 pins. The electronic part is mounted using the Surface Mount method. Subcategory FF/Latches includes this part. 5V power supplies are needed to operate it. Based on its reliable performance, this device is well suited to TAPE AND REEL. Due to its 8mA output current, it offers maximum design flexibility. High efficiency requires a voltage supply of 5V. 4 output lines generate the binary equivalent of the input lines. Its superior flexibility is achieved by using 2 circuits. There are also characteristics of DUMMY VAL associated with it. SN74LS375NSRE4 Features16-SOIC (0.209, 5.30mm Width) package 74LS series 2 Bits 74LS375 family 16 pin count 16 pins 5V power supplies SN74LS375NSRE4 ApplicationsThere are a lot of Texas Instruments SN74LS375NSRE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74F2373DWE4 OverviewThe 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the packaging method. In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. A temperature of 0°C~70°C is used for operation. In the 74F series, this FPGA is located. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74F2373. A 5V voltage supply is required for operation. It has 20 pins that makes it easy to use. It is a member of the F/FAST family of electronic devices. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 5V power supplies. There should be a voltage supply (Vsup) greater than 4.5V. Its 12mA output current allows for maximum design flexibility. The binary equivalent of the input line is generated by 8 output lines. SN74F2373DWE4 Features20-SOIC (0.295, 7.50mm Width) package 74F series 8 Bits 74F2373 family 20 pin count 20 pins 5V power supplies SN74F2373DWE4 ApplicationsThere are a lot of Texas Instruments SN74F2373DWE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74F2373DWR OverviewIn the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is 0°C~70°C at the operating temperature. An FPGA of this type belongs to the 74F series. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. It belongs to 74F2373 family. The supply voltage of the device is 5V. The device is equipped with 20 pins. In the world of electronics, this electronic device belongs to the family of F/FAST. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. This part is included in FF/Latches. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. There are 5V power supplies attached to it. The supply voltage (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The output current of 12mA makes it feature maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. SN74F2373DWR Features20-SOIC (0.295, 7.50mm Width) package 74F series 8 Bits 74F2373 family 20 pin count 20 pins 5V power supplies SN74F2373DWR ApplicationsThere are a lot of Texas Instruments SN74F2373DWR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ABT573AZQNR OverviewIt is embedded in the 20-VFBGA package. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. There is -40°C~85°C operating temperature. The 74ABT series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. As a member of the 74ABT573 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. ABT is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. Vsup reaches 5.5V as the maximum supply voltage. A total of 5V power supplies are needed to run it. A supply voltage (Vsup) greater than 4.5V is required. Based on its reliable performance, this device is suitable for TAPE AND REEL. It follows that 8 output lines are generated from the binary equivalent of the input line. In addition, BROADSIDE VERSION OF 373 characterize it. SN74ABT573AZQNR Features20-VFBGA package 74ABT series 8 Bits 74ABT573 family 20 pin count 20 pins 5V power supplies SN74ABT573AZQNR ApplicationsThere are a lot of Texas Instruments SN74ABT573AZQNR Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV573ATDWE4 Overview20-SOIC (0.295, 7.50mm Width) contains it. Tube is the way in which it is packaged. It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates at a voltage of 2V~5.5V. There is -40°C~85°C operating temperature. It is a type of FPGA belonging to the 74LV series. The design of this electronic part is based on 8 bits. This device has 20 terminations. As a member of the 74LV573 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. LV/LV-A/LVX/H is the family of this electronic device. In addition, it is designed with a pin number of 20. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The 16mA output current gives it maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. SN74LV573ATDWE4 Features20-SOIC (0.295, 7.50mm Width) package 74LV series 8 Bits 74LV573 family 20 pin count 20 pins 5V power supplies SN74LV573ATDWE4 ApplicationsThere are a lot of Texas Instruments SN74LV573ATDWE4 Latches applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LVC841ADWR Overview24-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. It operates at -40°C~85°C degrees Celsius. An FPGA of this type belongs to the 74LVC series. An electronic part with 10 bits is designed. A device such as this has 24 terminations designed. The family 74LVC841 includes it. The device works with a voltage of 1.8V for its supply voltage. The 24 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. With the design of the board, there are only 24 pins. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. 3.3V power supplies are needed to operate it. On the basis of its reliability, this device is well suited for TAPE AND REEL. 10 output lines generate the binary equivalent of the input lines. A total of 1 elements are contained in it. SN74LVC841ADWR Features24-SOIC (0.295, 7.50mm Width) package 74LVC series 10 Bits 74LVC841 family 24 pin count 24 pins 3.3V power supplies 1 elements SN74LVC841ADWR ApplicationsThere are a lot of Texas Instruments SN74LVC841ADWR Latches applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.