Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My Cart
Total:0Sub-Total : $0.00
Image Part Manufacturer Description Stock Action
6PAIC3254IRHBRQ1 Texas Instruments

6PAIC3254IRHBRQ1 Overview


A 32-VFQFN Exposed Pad package is supplied for space savings. It is adopted to package in the manner of Tape & Reel (TR). Because it is a type of Audio, it delivers high-efficiency performance in many applications. It employs Surface Mount as its mounting type. A performance setting of -40°C~85°C allows it to operate normally. It consists of 2 / 2 ADCs/ DACs. The analog circuit is powered by 1.5V~3.6V. 1.26V~3.6V is the supply voltage for the digital circuit. The transmission line is terminated with 32 terminations to prevent reflection of signals. In electronic terms, it is a kind of 32-pin device. Its base part number AIC3254 can be used to find more parts like it. Based on the Surface Mount technology, the module is mounted to a PCB. Supply voltage should never exceed 3.6V. It is recommended that the minimum supply voltage be kept at 1.9V. A voltage of 1.8V is required to operate the device. It can be operated from a voltage of 3.3V. As a member of the Automotive, AEC-Q100 series, this electronic component is suitable for a wide spectrum of applications. There are 6 analog inputs on the device. A total of 4 analog outputs are available on the device. An analog output can be sampled from a numerical value by 2 DAC channels.

6PAIC3254IRHBRQ1 Features


Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
6 analog inputs
4 analog outputs

6PAIC3254IRHBRQ1 Applications


There are a lot of Texas Instruments 6PAIC3254IRHBRQ1 CODECs Interface ICs applications.

  • Registration mark timing
  • Full adders
  • War field flying robot with a using night-vision flying camera
  • Aerospace
  • Timber products
  • Radiation therapy
  • Ships navigation
  • Cut-to-length
  • Galvanometer scanners
  • Servo motors
999
In-stock
Get Quote
TLV320AIC23BPW Texas Instruments

TLV320AIC23BPW Overview


Due to space constraints, it is supplied in the 28-TSSOP (0.173, 4.40mm Width) package. The packaging way of Tube is adopted. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type of this device is Surface Mount. A -10°C~70°C operating performance setting allows it to operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. A supply voltage of 2.7V~3.6V is applied to the analog circuit. It is supplied with a voltage of 1.42V~3.6V to power the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 28 terminations. The device has 28 pins. The board is configured with 28 pins. Its base part number TLV320AIC23 can be used to find other parts that are related. It is recommended to maintain the maximum supply voltage at 3.6V. It is classified under the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 1.42V is recommended. Often in the process of converting digital signals into analog signals, there are 2 D/A converters. Information is stored with 24 bits. The device has 3 analog inputs. It features 4 analog outputs. 1 ADC channels indicate how many analog values can be read simultaneously.

TLV320AIC23BPW Features


Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
3 analog inputs
4 analog outputs

TLV320AIC23BPW Applications


There are a lot of Texas Instruments TLV320AIC23BPW CODECs Interface ICs applications.

  • Material handling
  • Electronics industry
  • X-Y positioning
  • Stagecraft
  • Elevators
  • Textile manufacturing
  • Code conversion
  • High-performance memory system
  • Data transfer
  • Flight simulators
999
In-stock
Get Quote
TLV320AIC3256IRSBR Texas Instruments

TLV320AIC3256IRSBR Overview


Space-saving reasons have led to it being packaged in a 40-WFQFN Exposed Pad package. Tape & Reel (TR) packaging is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. As far as mounting types are concerned, it uses Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. 2 / 2 ADC / DAC is integrated into it. 1.5V~1.95V of supply voltage are applied to the analog circuit. Supply voltage is set to 1.26V~1.95V for the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 40 terminations are used. This device consists of a row of 40-pins. The board is configured with 40 pins. More related parts can be found using its base part number TLV320AIC3256. Using Surface Mount technology, it is mounted to a PCB. 3.6V should be the maximum value of the supply voltage. Subcategory Other Consumer ICs describes this electronic part. Maintaining a minimum voltage of 1.1V is recommended. A 1.8V power supply is needed to operate it. A wide range of applications can be met by this electronic component belonging to the PowerTune? series. The device has 6 analog inputs. There are 4 analog outputs on this device. An analog output can be sampled from a numerical value by 2 DAC channels.

TLV320AIC3256IRSBR Features


Embedded in the 40-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
6 analog inputs
4 analog outputs

TLV320AIC3256IRSBR Applications


There are a lot of Texas Instruments TLV320AIC3256IRSBR CODECs Interface ICs applications.

  • Feature extraction
  • Linear measurement
  • CNC machining
  • Galvanometer scanners
  • High-performance memory systems
  • Converting
  • Digital systems
  • Speed synchronization of multiple motors in industries
  • Wire number reduction in application that have multiple inputs
  • Data distribution
999
In-stock
Get Quote
PCM3794ARHBR Texas Instruments

PCM3794ARHBR Overview


A 32-VFQFN Exposed Pad package is provided to save space. Tape & Reel (TR) is the packaging method used. As a type of Stereo Audio, this electronic part is able to deliver high-efficient performance in various applications. It uses a mounting type of Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. 2 / 2 ADC / DAC is integrated into it. There is a voltage supply of 2.4V~3.6V to the analog circuit. Digital circuits are powered by 1.71V~3.6V supply voltages. Transmission lines have 32 terminations, which prevent signals from re-emitted. There are 32 pins on this device. It is configured with 32 pins. By using its base part number PCM3794, you can find more related parts. Voltage should not exceed 3.6V. As a result of analog signals being converted into digital signals, there are 2 A/D converters. It is recommended to maintain a voltage of 1.71V as the minimum value. A voltage of 3.3V is required to operate the device. Powered by a 3.3V supply voltage, it can run. The data transmission channel count is 4. The storage of information is provided by 16 bits. The normal electrical current of 10μA that is expected to flow through the circuit at any given time.

PCM3794ARHBR Features


Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters

PCM3794ARHBR Applications


There are a lot of Texas Instruments PCM3794ARHBR CODECs Interface ICs applications.

  • Counting applications
  • Wind turbines
  • Translating the decimal values to the binary
  • Rotating radar platforms
  • Backstop gauging
  • Off-Highway Vehicles (OHV)
  • Elevators
  • Missing value imputation
  • Wire number reduction in application that have multiple inputs
  • Motor speed /RPM readout
999
In-stock
Get Quote
TLV320AIC28IRGZ Texas Instruments

TLV320AIC28IRGZ Overview


For space-saving purposes, it is packaged in 48-VFQFN Exposed Pad. It is adopted to package in the manner of Tube. As a type of Stereo Audio, this electronic part is able to deliver high-efficient performance in various applications. A mounting type of Surface Mount is used for this device. When the operating performance is set to -40°C~85°C, it is able to operate normally. Integrated ADCs / DACs are available in 1 / 2. A supply voltage of 3V~3.6V is applied to the analog circuit. Digital circuits are powered by 1.65V~1.95V supply voltages. In order to avoid reflections off the end of the transmission line, 48 terminations are used. There are 48 pins on this device. It has a configuration of 48 pins. More related parts can be found using its base part number TLV320AIC28. The chip is mounted to the PCB using the Surface Mount technology. Voltage should not exceed 4.2V. Subcategory Other Consumer ICs describes this electronic part. 1.1V should be the minimum value of supply voltage. 3.6V is the supply voltage that it can operate from. Digital signals are converted into analog signals using 2 D/A converters. There are 24 bits provided to store information. The device is equipped with 6 analog inputs. There are 5 analog outputs on the board. As far as the analog values can be read at once, this ADC has 1 channels.

TLV320AIC28IRGZ Features


Embedded in the 48-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
1 / 2 ADCs / DACs
6 analog inputs
5 analog outputs

TLV320AIC28IRGZ Applications


There are a lot of Texas Instruments TLV320AIC28IRGZ CODECs Interface ICs applications.

  • Medical industry
  • Automated Guided Vehicles (AGV)
  • Counting applications
  • CT and MRI scanning machinery
  • Speed measurement
  • Galvanometer scanners
  • RF-based home automation system
  • Image search
  • Elevators
  • Feature extraction
999
In-stock
Get Quote
TLV320AIC23BIRHD Texas Instruments

TLV320AIC23BIRHD Overview


A 28-VFQFN Exposed Pad package is supplied for space savings. It is adopted to package in the manner of Tube. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. It employs Surface Mount as its mounting type. When the operating performance is set to -40°C~85°C, it is able to operate normally. 2 / 2 ADC / DAC is integrated into it. 2.7V~3.6V of supply voltage are applied to the analog circuit. 1.42V~3.6V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 28 terminations are used. In terms of electronics, it is a 28-pin device. There are 28 pins on this board. More related parts can be found using its base part number TLV320AIC23. It is recommended to maintain the maximum supply voltage at 3.6V. Converting analog signals to digital signals requires 2 A/D converters. It is classified under the subcategory of Other Consumer ICs. A minimum supply voltage of 1.42V should be maintained. There are 3 analog inputs on the device. A total of 4 analog outputs are included. ADC channels represent the number of analog values that can be read simultaneously.

TLV320AIC23BIRHD Features


Embedded in the 28-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs

TLV320AIC23BIRHD Applications


There are a lot of Texas Instruments TLV320AIC23BIRHD CODECs Interface ICs applications.

  • Digital systems
  • Dimensionality reduction
  • Switching function
  • Demultiplexing
  • Backstop gauging
  • Robotics
  • Cut-to-length
  • Metal forming & fabrication
  • Speed synchronization of multiple motors in industries
  • Code conversion
999
In-stock
Get Quote
TLV320AIC3268IRGCR Texas Instruments

TLV320AIC3268IRGCR Overview


A 64-VFQFN Exposed Pad package is supplied for space savings. Packaging is done in the form of a Tape & Reel (TR). Its Audio type ensures high-efficiency performance in a range of applications. Surface Mount is the mounting type employed by this device. Using -40°C~85°C as the operating performance allows it to operate normally. The board is integrated with 2 / 2 ADCs and DACs. The analog circuit is powered by 1.5V~1.95V. It is supplied with a voltage of 1.26V~1.95V to power the digital circuit. Transmission lines have 64 terminations, which prevent signals from re-emitted. The device has a 64-pin configuration. The base part number TLV320AIC3268 can be used to find related parts. Based on the Surface Mount technology, the module is mounted to a PCB. From a supply voltage of 1.8V, it can operate. A minimum supply voltage of 1.5V is supported. The maximum supply voltage it can handle is 1.95V. It features 8 analog inputs. It is equipped with 7 analog outputs. An analog output can be sampled from numerical values using 2 DAC channels.

TLV320AIC3268IRGCR Features


Embedded in the 64-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
8 analog inputs
7 analog outputs

TLV320AIC3268IRGCR Applications


There are a lot of Texas Instruments TLV320AIC3268IRGCR CODECs Interface ICs applications.

  • Speed synchronization of multiple motors in industries
  • Off-Highway Vehicles (OHV)
  • Missing value imputation
  • Data distribution
  • Printing
  • Spooling or level wind
  • Automated Guided Vehicles (AGV)
  • Cut-to-length
  • Material handling
  • Robotic arm positioning
999
In-stock
Get Quote
TLV320AIC3256IYZFT Texas Instruments

TLV320AIC3256IYZFT Overview


It is supplied in the 42-UFBGA, DSBGA package for the purpose of space saving. The packaging way of Tape & Reel (TR) is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. As far as mounting types are concerned, it uses Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. It features 2 / 2 ADCs / DACs. An analog circuit is supplied with a voltage of 1.5V~1.95V. Supply voltage is set to 1.26V~1.95V for the digital circuit. There are 42 terminations used to prevent signals from reflecting off the end of the transmission line. In electronic terms, it is a kind of 42-pin device. It has a configuration of 42 pins. Its base part number TLV320AIC3256 can be used to find more related parts. Using the Surface Mount technology, it is mounted to a PCB. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. Analog signals are converted to digital signals by means of 2 A/D converters. There is subcategory Other Consumer ICs for this electronic part. Minimum supply voltage should remain at 1.1V. Power supplies of 1.8V are used. This electronic part belonging to the family of PowerTune? series is well suited for a wide range of applications. 6 analog inputs are available on this device. There are 4 analog outputs on this device.

TLV320AIC3256IYZFT Features


Embedded in the 42-UFBGA, DSBGA package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
6 analog inputs
4 analog outputs

TLV320AIC3256IYZFT Applications


There are a lot of Texas Instruments TLV320AIC3256IYZFT CODECs Interface ICs applications.

  • Web tensioning
  • Multiplication
  • Linear measurement
  • Analog to digital conversion in the analog decoder
  • Material handling
  • Metal forming & fabrication
  • Linear distance measurement
  • Medical industry
  • Demultiplexing
  • Steel mills
999
In-stock
Get Quote
PCM3501E Texas Instruments

PCM3501E Overview


For space-saving purposes, it is packaged in 24-SSOP (0.209, 5.30mm Width). It is adopted to package in the Tube way. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. This device employs the mounting type Surface Mount. Using -25°C~85°C as the operating performance allows it to operate normally. 1 / 1 ADCs and DACs are integrated into it. 2.7V~3.6V of supply voltage are applied to the analog circuit. 2.7V~3.6V provides the supply voltage to the digital circuit. There are 24 terminations used to prevent signals from reflecting off the end of the transmission line. There are 24 pins on this device. It has a configuration of 24 pins. More related parts can be found by using its base part number PCM3501. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. Subcategory Codecs applies to this electronic part. At a minimum, the voltage should be kept at 2.7V. The supply voltage is set to 3.3V. The device can operate with a voltage of 3.3V. Often in the process of converting digital signals into analog signals, there are 1 D/A converters. Information is stored with 16 bits. This electronic part belonging to the family of SoundPlus? series is well suited for a wide range of applications. During any given time, a circuit should carry a current of 12μA.

PCM3501E Features


Embedded in the 24-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
1 / 1 ADCs / DACs

PCM3501E Applications


There are a lot of Texas Instruments PCM3501E CODECs Interface ICs applications.

  • Pulp & paper mills
  • Aerospace
  • War field flying robot with a using night-vision flying camera
  • Image denoising
  • Linear measurement
  • Sawmills
  • Counting applications
  • Off-Highway Vehicles (OHV)
  • Wire number reduction in application that have multiple inputs
  • Medical industry
999
In-stock
Get Quote
PCM2900CDBR Texas Instruments

PCM2900CDBR Overview


For space-saving reasons, it is supplied in a 28-SSOP (0.209, 5.30mm Width) package. As a packaging method, Tape & Reel (TR) is adopted. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Stereo Audio. This device employs the mounting type Surface Mount. It is able to operate normally when the operating performance is set at -25°C~85°C. It consists of 2 / 2 ADCs/ DACs. Supply voltage 3.1V~3.5V is provided to the analog circuit. Digital circuits are powered by 3.1V~3.5V supply voltages. Signals are prevented from reflecting off the transmission line's terminations by using 28 terminations. In electronic terms, it is a kind of 28-pin device. The board is configured with 28 pins. By using its base part number PCM2900, you can find more related parts. On a PCB based on Surface Mount technology, it is mounted. Supply voltage should never exceed 5.25V. Converting analog signals to digital signals requires 1 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. Power supplies of 5V are used to operate it. Powered by a 5V supply voltage, it can run. It is expected that 67mA will flow normally through the circuit throughout its lifetime. A total of 2 analog outputs are included.

PCM2900CDBR Features


Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs

PCM2900CDBR Applications


There are a lot of Texas Instruments PCM2900CDBR CODECs Interface ICs applications.

  • Addition
  • Printing
  • Dimensionality reduction
  • Pulp & paper mills
  • Feature extraction
  • Stagecraft
  • Wire number reduction in a particular circuits
  • Automatic health monitoring systems
  • Timber products
  • Sawmills
999
In-stock
Get Quote
PCM2906CDBR Texas Instruments

PCM2906CDBR Overview


Space-saving is achieved by supplying it in the 28-TSSOP (0.173, 4.40mm Width) package. We have adopted the packaging method of Tape & Reel (TR). It can perform highly efficiently in various applications since it is a type of Stereo Audio. Mounting type Surface Mount is used. Operating performance -25°C~85°C permits it to function normally. In addition, it is equipped with 2 / 2 ADCs and DACs. An analog circuit is supplied with a voltage of 3.1V~3.5V. 3.1V~3.5V is the supply voltage for the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 28 terminations are used. Essentially, it is an electronic device with 28 pins. Find more related parts by using its base part number PCM2906. On a PCB based on Surface Mount technology, it is mounted. Supply voltage should never exceed 5.25V. Analog signals are converted to digital signals by means of 1 A/D converters. A part in this category is classified as subcategory Other Consumer ICs. The minimum value of supply voltage should be maintained at 4.35V. Power supplies of 5V are required to operate it. When the supply voltage is 5V, it can operate. Current flowing through a circuit on a regular basis is 67mA. The device has 2 analog outputs.

PCM2906CDBR Features


Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs

PCM2906CDBR Applications


There are a lot of Texas Instruments PCM2906CDBR CODECs Interface ICs applications.

  • Demultiplexing
  • Digital systems
  • Microprocessor
  • Ball screw positioning
  • Position measurement
  • High-performance memory system
  • Off-Highway Vehicles (OHV)
  • CT and MRI scanning machinery
  • Printing
  • Automated Guided Vehicles (AGV)
999
In-stock
Get Quote
TWL6040A2ZQZ Texas Instruments

TWL6040A2ZQZ Overview


A 120-VFBGA package is provided to save space. Tray is the packaging method used. Its Audio type ensures high-efficiency performance in a range of applications. Surface Mount is the mounting type employed by this device. At -30°C~85°C, it can operate normally. It is equipped with a total of 2 / 4 ADCs and DACs. In the analog circuit, the supply voltage is 2.1V. The digital circuit is provided with the supply voltage of 1.8V. The transmission line is terminated with 120 terminations to prevent reflection of signals. There are 120 pins on this device. There are 120 pins on this board. Its base part number TWL6040 can be used to find more related parts. This device is mounted on a PCB which uses the Surface Mount technology. The maximum value of supply voltage should be maintained at 5.5V. Analog signals are converted into digital signals using 2 A/D converters. It is recommended that the minimum supply voltage be kept at 2.3V. Voltage 2.1V is used for its power supply. In order to convert digital signals into analog signals, there are 4 D/A converters. Data transmission is achieved through 8 channels. The supply voltage is 10mA.

TWL6040A2ZQZ Features


Embedded in the 120-VFBGA package
Operating temperature of -30°C~85°C
2 / 4 ADCs / DACs
2 A/D converters
Operating supply current of 10mA

TWL6040A2ZQZ Applications


There are a lot of Texas Instruments TWL6040A2ZQZ CODECs Interface ICs applications.

  • Advanced breast cancer treatments
  • Dimensionality reduction
  • Translating the decimal values to the binary
  • Full adders
  • CT and MRI scanning machinery
  • Data distribution
  • Semiconductor fabrication
  • Magnetic positional control
  • X-Y positioning
  • Material handling
999
In-stock
Get Quote
TP3054WM-X Texas Instruments

TP3054WM-X Overview


A 16-SOIC (0.295, 7.50mm Width) package is provided to save space. The packaging way of Tube is adopted. Due to the fact that this part is of the type PCM, Filter, it is capable of delivering high-efficiency performance in a wide range of applications. This device employs the mounting type Surface Mount. At -25°C~125°C, it can operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit is provided with the supply voltage of ±5V. To prevent signals from reflecting off of the transmission line, there are 16 terminations. In electronic terms, it is a kind of 16-pin device. More related parts can be found using its base part number TP3054. The chip is mounted to the PCB using the Surface Mount technology. Ideally, the supply voltage should remain at 5.25V. Analog signals are converted into digital signals by A/D converters. There is a subcategory of Codecs for this electronic part. Supply voltage should be maintained at 4.75V. There is 5V supply voltage for this device. Operating voltages as low as 5V can be used. There are a variety of applications for this electronic part from the COMBO? series. The supply current kept below 0.009mA makes them operate in an easy way. It is important to note that the supply voltage -5V has more negative polarity than the ground.

TP3054WM-X Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 1 ADCs / DACs
1 A/D converters

TP3054WM-X Applications


There are a lot of Texas Instruments TP3054WM-X CODECs Interface ICs applications.

  • Filling
  • Chemical dosing pumps
  • RF-based home automation system
  • Medical industry
  • Flight simulators
  • Half adders
  • Digital systems
  • Packaging
  • Wind turbines
  • CNC machining
999
In-stock
Get Quote
TP3057WM Texas Instruments

TP3057WM Overview


As a space saver, it comes in the 16-SOIC (0.295, 7.50mm Width) package. It is adopted to package in the manner of Tube. As a type of PCM, Filter, this electronic part is able to deliver high-efficient performance in various applications. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -25°C~125°C, it can operate normally. It is equipped with a total of 1 / 2 ADCs and DACs. The analog circuit is powered by ±5V. There are 16 terminations used to prevent signals from reflecting off the end of the transmission line. The device has a 16-pin configuration. The pins are configured as 16. Its base part number TP3057 can be used to find other parts that are related. The chip is mounted to the PCB using the Surface Mount technology. Ideally, the supply voltage should remain at 5.25V. Analog signals are converted to digital signals by means of 1 A/D converters. Subcategory Codecs describes this electronic part. The minimum value of supply voltage should be maintained at 4.75V. There is no supply voltage for it. The device is able to operate at 5V voltages. In order to convert digital signals into analog signals, there are 2 D/A converters. It is easy to operate them since the supply current is kept below 0.009mA. Circuits with -5V supply voltages have polarities that are more negative than ground.

TP3057WM Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057WM Applications


There are a lot of Texas Instruments TP3057WM CODECs Interface ICs applications.

  • Pulp & paper mills
  • Advanced breast cancer treatments
  • Timber products
  • Material handling
  • Electronic circuits
  • Ball screw positioning
  • Servo motors
  • High-performance memory systems
  • Linear measurement
  • Position measurement
999
In-stock
Get Quote
TP3057V Texas Instruments

TP3057V Overview


Space-saving is achieved by supplying it in the 20-LCC (J-Lead) package. Packaging is done in the form of a Tube. It can perform highly efficiently in various applications since it is a type of PCM, Filter. Surface Mount is the mounting type employed by this device. At -25°C~125°C, it can operate normally. Integrated ADCs / DACs are available in 1 / 2. Supply voltage is ±5V for the analog circuit. Signals are prevented from reflecting off the end of transmission lines by 20 terminations. In electronic terms, it is a kind of 20-pin device. The board is configured with 20 pins. Find more related parts by using its base part number TP3057. Mounted on a PCB based on the technology of Surface Mount. Supply voltage should be maintained at 5.25V. Analog signals are converted into digital signals by A/D converters. It is classified as a Codecs electronic part. It is recommended that the supply voltage is maintained at 4.75V. In order to operate, it must be supplied with a voltage of 5V. When the supply voltage is 5V, it can operate. The conversion of digital signals into analog signals is done using D/A converters, and there are 2 D/A converters available. Circuits with -5V supply voltages have polarities that are more negative than ground.

TP3057V Features


Embedded in the 20-LCC (J-Lead) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057V Applications


There are a lot of Texas Instruments TP3057V CODECs Interface ICs applications.

  • Logical circuits
  • Half adders
  • Metal forming & fabrication
  • Oil & gas production
  • Ball screw positioning
  • Missing value imputation
  • CPU memory location identification
  • Robotic arm positioning
  • Motor speed /RPM readout
  • Cut-to-length
999
In-stock
Get Quote
TP3057N Texas Instruments

TP3057N Overview


A 16-DIP (0.300, 7.62mm) package is provided to save space. The packaging way of Tube is adopted. This electronic part is categorized as a type of PCM, Filter, making it capable of providing high-efficiency performance in a variety of applications. Mounting type Through Hole is used. Operating performance -25°C~125°C permits it to function normally. It is integrated with 1 / 2 ADCs / DACs. Supply voltage is ±5V for the analog circuit. There are 16 terminations used to prevent signals from reflecting off the end of the transmission line. This device consists of a row of 16-pins. There are 16 pins on it. More related parts can be found using its base part number TP3057. The chip is mounted to the PCB using the Through Hole technology. The maximum value of supply voltage should be maintained at 5.25V. Analog signals are converted into digital signals using 1 A/D converters. A part in this category is classified as subcategory Codecs. Maintaining a minimum voltage of 4.75V is recommended. A voltage of 5V is required to operate the device. 5V is the supply voltage that it can operate from. To convert digital signals into analog signals, there are 2 D/A converters. They can operate with ease if the supply current is kept below 0.009mA. In this circuit, there are -5V supply voltages with polarity that is more negative than ground.

TP3057N Features


Embedded in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057N Applications


There are a lot of Texas Instruments TP3057N CODECs Interface ICs applications.

  • Ships navigation
  • Speed synchronization of multiple motors in industries
  • Filling
  • Web tensioning
  • Sawmills
  • Wire number reduction in application that have multiple inputs
  • Textile manufacturing
  • Subtraction
  • Metal forming & fabrication
  • Automated Guided Vehicles (AGV)
999
In-stock
Get Quote
TP3057WMX Texas Instruments

TP3057WMX Overview


As a space saver, it comes in the 16-SOIC (0.295, 7.50mm Width) package. The packaging way of Tape & Reel (TR) is adopted. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of PCM, Filter. Mounting type Surface Mount is used. When the operating performance is set to -25°C~125°C, it is able to operate normally. The unit is integrated with 1 / 2 ADCs / DACs. Supply voltage is ±5V for the analog circuit. In order to avoid reflections off the end of the transmission line, 16 terminations are used. In terms of electronics, it is a 16-pin device. The board has 16 pins configured. More related parts can be found by using its base part number TP3057. Based on the Surface Mount technology, the module is mounted to a PCB. As a result of analog signals being converted into digital signals, there are 1 A/D converters. This electronic part is classified into the subcategory of Codecs. This device operates on 5V volts as its supply voltage. Operating voltage of 5V is possible. Digital signals are converted into analog signals using 2 D/A converters. Keeping the supply current at 0.009mA allows them to operate easily. There is -5V supply voltage that is more negative in polarity than the ground of the circuit.

TP3057WMX Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057WMX Applications


There are a lot of Texas Instruments TP3057WMX CODECs Interface ICs applications.

  • Analog to digital conversion in the analog decoder
  • Microprocessor
  • Metal forming & fabrication
  • Radiation therapy
  • Mobile equipement
  • Material handling
  • Image denoising
  • Automated Guided Vehicles (AGV)
  • Image search
  • Digital systems
999
In-stock
Get Quote
TP3054WM-X/63 Texas Instruments

TP3054WM-X/63 Overview


A 16-SOIC (0.295, 7.50mm Width) package is supplied for space savings. It is adopted to package in the Tape & Reel (TR) way. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of PCM, Filter. As far as mounting types are concerned, it uses Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. 1 / 2 ADCs and DACs are integrated into it. To prevent signals from reflecting off of the transmission line, there are 16 terminations. The device has a 16-pin configuration. Using its base part number TP3054, it can be used to locate parts that are related. Subcategory Codecs describes this electronic part. There is no supply voltage for it. It operates with power supplies of +-5V. It's easy to operate them when the supply current is kept below 0.011mA. There is -5V supply voltage that is more negative in polarity than the ground of the circuit.

TP3054WM-X/63 Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C
1 / 2 ADCs / DACs

TP3054WM-X/63 Applications


There are a lot of Texas Instruments TP3054WM-X/63 CODECs Interface ICs applications.

  • Counting applications
  • Image compression
  • Speed synchronization of multiple motors in industries
  • Advanced breast cancer treatments
  • Wind turbines
  • Autonomous vehicles & robots
  • Electronic circuits
  • Position measurement
  • Motor speed /RPM readout
  • Semiconductor fabrication
999
In-stock
Get Quote
TWL6041BSRSYFFT Texas Instruments

TWL6041BSRSYFFT Overview


A 81-UFBGA, DSBGA package is provided to save space. Tape & Reel (TR) packaging is adopted. As a type of Audio, this electronic part is able to deliver high-efficient performance in various applications. It uses a mounting type of Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. It is integrated with 2 / 4 ADCs / DACs. 2.1V of supply voltage are applied to the analog circuit. Supply voltage is set to 1.8V for the digital circuit. In terms of electronics, it is a 81-pin device. Using its base part number TWL6041, it can be used to locate parts that are related. Using Surface Mount technology, it is mounted to a PCB. Operating voltages as low as 5.5V can be used.

TWL6041BSRSYFFT Features


Embedded in the 81-UFBGA, DSBGA package
Operating temperature of -40°C~85°C
2 / 4 ADCs / DACs

TWL6041BSRSYFFT Applications


There are a lot of Texas Instruments TWL6041BSRSYFFT CODECs Interface ICs applications.

  • Detecting interrupts in microprocesstor applications
  • Digital systems
  • Position measurement
  • Radiation therapy
  • Autonomous vehicles & robots
  • Cut-to-length
  • Missing value imputation
  • Off-Highway Vehicles (OHV)
  • Registration mark timing
  • Flight simulators
999
In-stock
Get Quote
TP3070V-G Texas Instruments

TP3070V-G Overview


As a space saver, it comes in the 28-LCC (J-Lead) package. It is adopted to package in the manner of Tube. This electronic component is of the type PCM, Filter, allowing it to provide high-efficiency performance in various applications. Mounting type Surface Mount is used. At 0°C~70°C, it can operate normally. In addition, it is equipped with 1 / 1 ADCs and DACs. A supply voltage of ±5V is applied to the analog circuit. In order to avoid reflections off the end of the transmission line, 28 terminations are used. 28-pin electronic devices are what it is. There are 28 pins on this board. The base part number TP3070 can be used to find related parts. Based on the Surface Mount technology, the module is mounted to a PCB. Supply voltage should never exceed 5.25V. It is classified under the subcategory of Codecs. A minimum supply voltage of 4.75V should be maintained. It operates on a supply voltage of 5V. From a supply voltage of 5V, it can operate. In order to convert digital signals into analog signals, there are 1 D/A converters. An information storage system with 8 bits is provided. It is suitable for a variety of applications and is part of the COMBO?II series. -5V voltage from the supply have a more negative polarity than voltages from the circuit's ground.

TP3070V-G Features


Embedded in the 28-LCC (J-Lead) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TP3070V-G Applications


There are a lot of Texas Instruments TP3070V-G CODECs Interface ICs applications.

  • Semiconductor fabrication
  • Addition
  • Data distribution
  • Detecting interrupts in microprocesstor applications
  • Metal forming & fabrication
  • Dimensionality reduction
  • Speed synchronization of multiple motors in industries
  • Robotic arm positioning
  • High-performance memory systems
  • Elevators
999
In-stock
Get Quote
TP3071N-G Texas Instruments

TP3071N-G Overview


Due to space constraints, it is supplied in the 20-DIP (0.300, 7.62mm) package. Tube packaging method is used. It can perform highly efficiently in various applications since it is a type of PCM, Filter. It employs Through Hole as its mounting type. Operating performance at 0°C~70°C makes it possible to operate normally. Integrated ADCs / DACs are available in 1 / 1. In the analog circuit, the supply voltage is 4.75V~5.25V. 4.75V~5.25V is the supply voltage for the digital circuit. There are 20 terminations used to prevent signals from reflecting off the end of the transmission line. There are 20 pins on this device. 20 pins are connected to it. Find more related parts by using its base part number TP3071. Based on the Through Hole technology, the module is mounted to a PCB. Voltage should not exceed 5.25V. There is subcategory Codecs for this electronic part. The minimum value of supply voltage should be maintained at 4.75V. The supply voltage is set to 5V. It can be operated from a voltage of 5V. Often in the process of converting digital signals into analog signals, there are 1 D/A converters. In order to store information, 8 bits are provided. It is suitable for a variety of applications and is part of the COMBO?II series. In the circuit, there are -5V supply voltages with a more negative polarity than the circuit ground.

TP3071N-G Features


Embedded in the 20-DIP (0.300, 7.62mm) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TP3071N-G Applications


There are a lot of Texas Instruments TP3071N-G CODECs Interface ICs applications.

  • Counting applications
  • Wire number reduction in application that have multiple inputs
  • Applications involving measuring wheels
  • Material handling
  • Image compression
  • CNC machining
  • Detecting interrupts in microprocesstor applications
  • Radiation therapy
  • Elevators
  • Registration mark timing
999
In-stock
Get Quote
LM4546BVH Texas Instruments

LM4546BVH Overview


For space-saving reasons, it is supplied in a 48-LQFP package. The packaging way of Tray is adopted. As a type of Audio, AC '97, this electronic part is able to deliver high-efficient performance in various applications. Mounting type Surface Mount is used. Operating performance at -40°C~85°C makes it possible to operate normally. The unit is integrated with 2 / 2 ADCs / DACs. Supply voltage is 4.2V~5.5V for the analog circuit. 3V~5.5V provides the supply voltage to the digital circuit. 48 terminations prevent signals from reflecting off transmission lines. There are 48 pins on this device. 48 pins are connected to it. Its base part number LM4546 can be used to find more related parts. This device is mounted on a PCB which uses the Surface Mount technology. It is recommended to maintain the maximum supply voltage at 5.5V. The electronic part has been classified as Other Consumer ICs. Supply voltage should be maintained at 3V. A 3.3/55V power supply is needed to operate it. The conversion of digital signals into analog signals is done using D/A converters, and there are 2 D/A converters available.

LM4546BVH Features


Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

LM4546BVH Applications


There are a lot of Texas Instruments LM4546BVH CODECs Interface ICs applications.

  • Textiles
  • Converting
  • Mobile equipement
  • Code conversion
  • Robotics
  • Logical circuits
  • Robotic arms
  • Electronic circuits
  • Position measurement
  • Robotic arm positioning
999
In-stock
Get Quote
TP3057WM/63SN Texas Instruments

TP3057WM/63SN Overview


For space-saving reasons, it is supplied in a 16-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) packaging is adopted. This electronic part is categorized as a type of PCM, Filter, making it capable of providing high-efficiency performance in a variety of applications. As a mounting type, it uses Surface Mount. When the operating performance is set to -25°C~125°C, it is able to operate normally. It is equipped with a total of 1 / 2 ADCs and DACs. In electronic terms, it is a kind of 16-pin device. More related parts can be found by using its base part number TP3057. Based on the Surface Mount technology, the module is mounted to a PCB. Maintain a maximum voltage of 5.25V. Analog signals are converted to digital signals by means of 1 A/D converters. A minimum supply voltage of 4.75V should be maintained. It can be operated from a voltage of 5V. There are 2 D/A converters used to convert the digital signals into analog signals.

TP3057WM/63SN Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057WM/63SN Applications


There are a lot of Texas Instruments TP3057WM/63SN CODECs Interface ICs applications.

  • Motor feedback
  • Detecting interrupts in microprocesstor applications
  • Timber products
  • Missing value imputation
  • Radiation therapy
  • Converting
  • Galvanometer scanners
  • Robotic arms
  • Image denoising
  • Counting applications
999
In-stock
Get Quote
TLV320AIC37IZQER Texas Instruments

TLV320AIC37IZQER Overview


This package uses the Tape & Reel (TR) packaging method. More related parts can be found using its base part number TLV320AIC37.

TLV320AIC37IZQER Features



TLV320AIC37IZQER Applications


There are a lot of Texas Instruments TLV320AIC37IZQER CODECs Interface ICs applications.

  • Oil & gas production
  • Translating the decimal values to the binary
  • Logical circuits
  • Full adders
  • Material handling
  • Cut-to-length
  • Ships navigation
  • Wire number reduction in a particular circuits
  • Mobile equipement
  • Linear distance measurement
999
In-stock
Get Quote
TP3054WM Texas Instruments

TP3054WM Overview


For space-saving purposes, it is packaged in 16-SOIC (0.295, 7.50mm Width). Packaging is done in the form of a Tube. In numerous applications, this electronic part can deliver high-efficiency performance as a type of PCM, Filter. As a mounting type, it uses Surface Mount. When the operating performance is set to -25°C~125°C, it is able to operate normally. It consists of 1 / 1 ADCs/ DACs. There is a voltage supply of ±5V to the analog circuit. In order to avoid reflections off the end of the transmission line, 16 terminations are used. This device consists of a row of 16-pins. It is configured with 16 pins. By using its base part number TP3054, you can find more related parts. On a PCB based on Surface Mount technology, it is mounted. 5.25V is the maximum value of supply voltage. Digital signals are converted from analog signals using 1 A/D converters. Subcategory Codecs describes this electronic part. Maintaining a minimum voltage of 4.75V is recommended. The device operates with a supply voltage of 5V. The device is able to operate at 5V voltages. As a member of the COMBO? series, this electronic component is suitable for a wide spectrum of applications. It's easy to operate them when the supply current is kept below 0.009mA. There is -5V supply voltage that is more negative in polarity than the ground of the circuit.

TP3054WM Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 1 ADCs / DACs
1 A/D converters

TP3054WM Applications


There are a lot of Texas Instruments TP3054WM CODECs Interface ICs applications.

  • Registration mark timing
  • Linear measurement
  • Aerospace
  • Dimensionality reduction
  • Dynamic applications
  • Metal forming & fabrication
  • Robotic arm positioning
  • Rotating radar platforms
  • Applications involving measuring wheels
  • Elevators
999
In-stock
Get Quote
TWL93017EZPHR Texas Instruments

TWL93017EZPHR Overview


Tape & Reel (TR) packaging method is used. Its base part number TWL93017 can be used to find more related parts.

TWL93017EZPHR Features



TWL93017EZPHR Applications


There are a lot of Texas Instruments TWL93017EZPHR CODECs Interface ICs applications.

  • Chemical dosing pumps
  • Off-Highway Vehicles (OHV)
  • Analog to digital conversion in the analog decoder
  • Robotics vehicle with the metal detector
  • Robotic arm positioning
  • Steel mills
  • Ball screw positioning
  • Applications involving measuring wheels
  • CNC machining
  • Demultiplexing
999
In-stock
Get Quote
TLV320AIC3010IZQZR Texas Instruments

TLV320AIC3010IZQZR Overview


Its base part number TLV320AIC3010 can be used to find more related parts.

TLV320AIC3010IZQZR Features



TLV320AIC3010IZQZR Applications


There are a lot of Texas Instruments TLV320AIC3010IZQZR CODECs Interface ICs applications.

  • Metal forming & fabrication
  • Backstop gauging
  • Textiles
  • Speed synchronization of multiple motors in industries
  • Microprocessor
  • CNC machining
  • Spooling or level wind
  • Ships navigation
  • Flight simulators
  • Conveying
999
In-stock
Get Quote
MC14LC5480DW NXP Semiconductors

MC14LC5480DW Overview


It is supplied in the 20-SOIC (0.295, 7.50mm Width) package for the purpose of space saving. The packaging way of Tube is adopted. This electronic part is categorized as a type of PCM, Filter, making it capable of providing high-efficiency performance in a variety of applications. The mounting type of this device is Surface Mount. At -40°C~85°C, it can operate normally. In addition, it is equipped with 1 / 1 ADCs and DACs. A 4.5V~5.5V supply voltage is applied to the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 20 terminations. Using its base part number MC14LC5480, it can be used to locate parts that are related. There is no supply voltage for it.

MC14LC5480DW Features


Embedded in the 20-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs

MC14LC5480DW Applications


There are a lot of NXP USA Inc. MC14LC5480DW CODECs Interface ICs applications.

  • Web tensioning
  • Autonomous vehicles & robots
  • Backstop gauging
  • Linear measurement
  • Speed measurement
  • Medical industry
  • Material handling
  • Analog to digital conversion in the analog decoder
  • Motor feedback
  • Ships navigation
999
In-stock
Get Quote
MC145481SD NXP Semiconductors

MC145481SD Overview


Due to space constraints, it is supplied in the 20-SSOP (0.209, 5.30mm Width) package. It is adopted to package in the manner of Tube. Because it is a type of PCM, Filter, it delivers high-efficiency performance in many applications. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -40°C~85°C, it is able to operate normally. 1 / 1 ADC / DAC is integrated into it. Digital circuits are powered by 2.7V~5.25V supply voltages. Signals are prevented from reflecting off the end of transmission lines by 20 terminations. The base part number MC145481 can be used to find related parts. Voltage 3V is used for its power supply.

MC145481SD Features


Embedded in the 20-SSOP (0.209, 5.30mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs

MC145481SD Applications


There are a lot of NXP USA Inc. MC145481SD CODECs Interface ICs applications.

  • Advanced breast cancer treatments
  • Registration mark timing
  • Linear measurement
  • War field flying robot with a using night-vision flying camera
  • Multiplication
  • Elevators
  • Radiation therapy
  • Translating the decimal values to the binary
  • Robotics vehicle with the metal detector
  • Feature extraction
999
In-stock
Get Quote
MC145484EN NXP Semiconductors

MC145484EN Overview


Due to space constraints, it is supplied in the 20-SSOP (0.209, 5.30mm Width) package. The packaging way of Tube is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of PCM, Filter. As a mounting type, it uses Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. It is equipped with a total of 1 / 1 ADCs and DACs. The digital circuit is provided with the supply voltage of 4.5V~5.5V. Its base part number MC145484 can be used to find more related parts.

MC145484EN Features


Embedded in the 20-SSOP (0.209, 5.30mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs

MC145484EN Applications


There are a lot of NXP USA Inc. MC145484EN CODECs Interface ICs applications.

  • Servo motors
  • Digital systems
  • Speed measurement
  • Multiplication
  • Printing
  • Analog to digital conversion in the analog decoder
  • Autonomous vehicles & robots
  • Anomaly detection
  • Flight simulators
  • Wire number reduction in a particular circuits
999
In-stock
Get Quote

Please send RFQ , we will respond immediately.