Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My Cart
Total:0Sub-Total : $0.00
Image Part Manufacturer Description Stock Action
UDA1344TS/N2,512 MG Chemicals

UDA1344TS/N2,512 Overview


A 28-SSOP (0.209, 5.30mm Width) package is supplied for space savings. The packaging way of Tube is adopted. This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. The mounting type is Surface Mount. When the operating performance is set to -40°C~85°C, the system can operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. 2.7V~3.6V of supply voltage are applied to the analog circuit. 2.7V~3.6V is the supply voltage for the digital circuit. With 28 pins, it is configured. Find more related parts by using its base part number UDA1344.

UDA1344TS/N2,512 Features


Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

UDA1344TS/N2,512 Applications


There are a lot of NXP USA Inc. UDA1344TS/N2,512 CODECs Interface ICs applications.

  • Logical circuits
  • Spooling or level wind
  • Aerospace
  • Robotics vehicle with the metal detector
  • Wire number reduction in a particular circuits
  • Motor speed /RPM readout
  • Radiation therapy
  • Analog to digital conversion in the analog decoder
  • Automation
  • Robotic arms
999
In-stock
Get Quote
TLV320AIC12IDBT Ultralife

TLV320AIC12IDBT Overview


In order to save space, it is packaged in the 30-TFSOP (0.173, 4.40mm Width) package. Packaging is done in the form of a Tube. This electronic component is of the type Voice-Band, allowing it to provide high-efficiency performance in various applications. Surface Mount is the mounting type employed by this device. Operating performance at -40°C~85°C makes it possible to operate normally. It is equipped with a total of 1 / 1 ADCs and DACs. In the analog circuit, the supply voltage is 2.7V~3.6V. 1.65V~1.95V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 30 terminations are used. Essentially, it is an electronic device with 30 pins. There are 30 pins configured on this board. Its base part number TLV320AIC12 can be used to find more related parts. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 3.6V. Analog signals are converted to digital signals by means of 1 A/D converters. This electronic part is classified into the subcategory of Codecs. It is recommended that the supply voltage is maintained at 1.1V. It operates on a supply voltage of 1.8V. For data transmission, the device has 4 channels. By keeping the supply current below 2mA, they are easy to operate. It is recommended not to exceed 2V for analog input voltage.

TLV320AIC12IDBT Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC12IDBT Applications


There are a lot of Texas Instruments TLV320AIC12IDBT CODECs Interface ICs applications.

  • Aerospace
  • Ball screw positioning
  • Packaging
  • Timber products
  • Automated Guided Vehicles (AGV)
  • Galvanometer scanners
  • Sawmills
  • Web tensioning
  • Speed measurement
  • Robotics
999
In-stock
Get Quote
TP3054N/NOPB Ultralife

TP3054N/NOPB Overview


A 16-DIP (0.300, 7.62mm) package is provided to save space. Tube packaging is adopted. Due to the fact that this part is of the type PCM, Filter, it is capable of delivering high-efficiency performance in a wide range of applications. Through Hole is the mounting type employed by this device. When the operating performance is set to -25°C~125°C, it can operate normally. It consists of 1 / 1 ADCs/ DACs. An analog circuit is supplied with a voltage of ±5V. In order to avoid reflections off the end of the transmission line, 16 terminations are used. The device has a 16-pin configuration. There are 16 pins configured on this board. More related parts can be found by using its base part number TP3054. It is mounted to a PCB based on the Through Hole technology. The maximum value of supply voltage should be maintained at 5.25V. It is classified as a Codecs electronic part. Supply voltage should be maintained at 4.75V. The supply voltage is set to 5V. The device is able to operate at 5V voltages. To convert digital signals into analog signals, there are 1 D/A converters. Electronic parts from the COMBO? series are ideal for a wide variety of applications. It is expected that 5mA will flow normally through the circuit throughout its lifetime. It is important to note that the supply voltage -5V has more negative polarity than the ground.

TP3054N/NOPB Features


Embedded in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 1 ADCs / DACs

TP3054N/NOPB Applications


There are a lot of Texas Instruments TP3054N/NOPB CODECs Interface ICs applications.

  • Electronics industry
  • Material handling
  • Autonomous vehicles & robots
  • CPU memory location identification
  • Microprocessor
  • Detecting interrupts in microprocesstor applications
  • Logical circuits
  • Digital systems
  • Code conversion
  • Filling
999
In-stock
Get Quote
PCM3008T Ultralife

PCM3008T Overview


In order to save space, it is packaged in the 16-TSSOP (0.173, 4.40mm Width) package. The packaging way of Tube is adopted. Because it is a type of Stereo Audio, it delivers high-efficiency performance in many applications. The mounting type is Surface Mount. Operating performance -25°C~85°C permits it to function normally. The unit is integrated with 2 / 2 ADCs / DACs. 2.1V~3.6V of supply voltage are applied to the analog circuit. A supply voltage of 2.1V~3.6V is applied to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 16 terminations. It is a kind of 16-pin electronic device. The board is configured with 16 pins. More related parts can be found using its base part number PCM3008. 3.6V should be the maximum value of the supply voltage. The electronic part has been classified as Other Consumer ICs. The minimum value of supply voltage should be maintained at 2.1V. Operating voltage of 2.4V is possible. There are 2 analog inputs on it. It is expected that 17mA will flow normally through the circuit throughout its lifetime. An analog output can be sampled from a numerical value through one of the 2 channels of the DAC.

PCM3008T Features


Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
2 analog inputs

PCM3008T Applications


There are a lot of Texas Instruments PCM3008T CODECs Interface ICs applications.

  • Image compression
  • Textiles
  • Code conversion
  • Detecting interrupts in microprocesstor applications
  • Automatic health monitoring systems
  • Off-Highway Vehicles (OHV)
  • CT and MRI scanning machinery
  • Speed synchronization of multiple motors in industries
  • Filling
  • Converting
999
In-stock
Get Quote
TP3064BN Ultralife

TP3064BN Overview


For space-saving reasons, it is supplied in a 20-DIP (0.300, 7.62mm) package. Tube packaging method is used. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of PCM, Filter. Through Hole is the mounting type employed by this device. A 0°C~70°C operating performance setting allows it to operate normally. Integrated ADCs / DACs are available in 1 / 1. A supply voltage of 4.75V~5.25V is applied to the analog circuit. Supply voltage is set to 4.75V~5.25V for the digital circuit. There are 20 terminations used to prevent signals from reflecting off the end of the transmission line. Essentially, it is an electronic device with 20 pins. Its base part number TP3064 can be used to find other parts that are related. On a PCB based on Through Hole technology, it is mounted. Ideally, the supply voltage should remain at 5.25V. There is a subcategory of Codecs for this electronic part. Maintaining a minimum voltage of 4.75V is recommended. There is no supply voltage for it. A power supply of +-5V is required for operation. The conversion of digital signals into analog signals is done using D/A converters, and there are 1 D/A converters available. Unlike the ground of the circuit, -5V supply voltages are more negative in polarity.

TP3064BN Features


Embedded in the 20-DIP (0.300, 7.62mm) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TP3064BN Applications


There are a lot of Texas Instruments TP3064BN CODECs Interface ICs applications.

  • Registration mark timing
  • Textile manufacturing
  • Elevators
  • Automatic health monitoring systems
  • Steel mills
  • War field flying robot with a using night-vision flying camera
  • Advanced breast cancer treatments
  • Robotic arms
  • Logical circuits
  • Medical & Lab Equipment
999
In-stock
Get Quote
PCM2900EG4 Ultralife

PCM2900EG4 Overview


A 28-SSOP (0.209, 5.30mm Width) package is provided to save space. This package uses the Tube packaging method. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. As a mounting type, it uses Surface Mount. Operating performance at -25°C~85°C makes it possible to operate normally. The unit is integrated with 2 / 2 ADCs / DACs. Supply voltage is 4.35V~5.25V for the analog circuit. 4.35V~5.25V provides the supply voltage to the digital circuit. 28 terminations prevent signals from reflecting off transmission lines. 28-pin electronic devices are what it is. There are 28 pins on this board. More related parts can be found using its base part number PCM2900. Based on the Surface Mount technology, the module is mounted to a PCB. In order for the supply voltage to be maintained at 5.25V, it should be set to its maximum value. To convert analog signals into digital signals, there are 1 A/D converters. There is subcategory Other Consumer ICs for this electronic part. A minimum supply voltage of 3.25V should be maintained. Power supplies of 5V are used to operate it. The storage of information is provided by 16 bits. Their operation is made easier by a supply current below 67mA. As there are 2 channels for ADCs, there is a maximum number of analog values that can be read simultaneously.

PCM2900EG4 Features


Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters

PCM2900EG4 Applications


There are a lot of Texas Instruments PCM2900EG4 CODECs Interface ICs applications.

  • Robotics
  • Mobile equipement
  • CNC machining
  • Timber products
  • Sawmills
  • Backstop gauging
  • Registration mark timing
  • Radiation therapy
  • High-performance memory systems
  • RF-based home automation system
999
In-stock
Get Quote
TP3057ADW Ultralife

TP3057ADW Overview


Due to space constraints, it is supplied in the 16-SOIC (0.295, 7.50mm Width) package. We have adopted the packaging method of Tube. In numerous applications, this electronic part can deliver high-efficiency performance as a type of PCM, Filter. The mounting type of this device is Surface Mount. When the operating performance is set to 0°C~70°C, it can operate normally. It is equipped with a total of 1 / 1 ADCs and DACs. The analog circuit is powered by ±5V. 16 terminations prevent signals from reflecting off transmission lines. The device has a 16-pin configuration. Find more related parts by using its base part number TP3057. Using Surface Mount technology, it is mounted to a PCB. The maximum value of supply voltage should be maintained at 5.25V. As a result of analog signals being converted into digital signals, there are 1 A/D converters. There is a subcategory of Codecs for this electronic part. At a minimum, the voltage should be kept at 4.75V. Voltage 5V is used for its power supply. The power supply for this device is +-5V. In order to convert digital signals into analog signals, there are 2 D/A converters. Keeping the supply current at 9mA allows them to operate easily. There are -5V supply voltages that have a more negative polarity than the ground.

TP3057ADW Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TP3057ADW Applications


There are a lot of Texas Instruments TP3057ADW CODECs Interface ICs applications.

  • Robotic arms
  • Image search
  • Full adders
  • Feature extraction
  • Missing value imputation
  • Web tensioning
  • Ships navigation
  • Oil & gas production
  • High-performance memory-decoding or data-routing applications
  • Subtraction
999
In-stock
Get Quote
TP3057V/NOPB Ultralife

TP3057V/NOPB Overview


A 20-LCC (J-Lead) package is provided to save space. We have adopted the packaging method of Tube. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of PCM, Filter. The mounting type of this device is Surface Mount. It is able to operate normally when the operating performance is set at -25°C~125°C. 1 / 2 ADCs and DACs are integrated into it. Supply voltage ±5V is provided to the analog circuit. In order to prevent signal reflections from off the end of the transmission line, 20 terminations are used. 20-pin electronic devices are what it is. There are 20 pins configured on this board. More related parts can be found using its base part number TP3057. It is mounted to a PCB based on the Surface Mount technology. 5.25V should be the maximum value of the supply voltage. Analog signals are converted into digital signals by A/D converters. There is a subcategory of Codecs for this electronic part. Minimum supply voltage should remain at 4.75V. There is 5V supply voltage for this device. The device can operate with a voltage of 5V. Digital signals are converted into analog signals using 2 D/A converters. The storage of information is provided by 8 bits. There is -5V supply voltage that is more negative in polarity than the ground of the circuit.

TP3057V/NOPB Features


Embedded in the 20-LCC (J-Lead) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057V/NOPB Applications


There are a lot of Texas Instruments TP3057V/NOPB CODECs Interface ICs applications.

  • Code conversion
  • Linear measurement
  • Aerospace
  • Pulp & paper mills
  • Half adders
  • Anomaly detection
  • Robotic arm positioning
  • Switching function
  • Translating the decimal values to the binary
  • Dynamic applications
999
In-stock
Get Quote
TLV320AIC32IRHB Ultralife

TLV320AIC32IRHB Overview


Due to space constraints, it is supplied in the 32-VFQFN Exposed Pad package. Tube packaging is adopted. Its Stereo Audio type ensures high-efficiency performance in a range of applications. As far as mounting types are concerned, it uses Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. It is integrated with 2 / 2 ADCs / DACs. There is a voltage supply of 2.7V~3.6V to the analog circuit. 1.65V~1.95V is the supply voltage for the digital circuit. The transmission line is terminated with 32 terminations to prevent reflection of signals. It is a kind of 32-pin electronic device. It has a configuration of 32 pins. Find more related parts by using its base part number TLV320AIC32. It is mounted to a PCB based on the Surface Mount technology. There is subcategory Other Consumer ICs for this electronic part. Powered by a 3.3V supply voltage, it can run. It is necessary to convert digital signals into analog signals by using 2 D/A converters. It supports a maximum supply voltage of 3.6V. In order to store information, 24 bits are provided.

TLV320AIC32IRHB Features


Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

TLV320AIC32IRHB Applications


There are a lot of Texas Instruments TLV320AIC32IRHB CODECs Interface ICs applications.

  • Rotating radar platforms
  • Image search
  • Semiconductor fabrication
  • Off-Highway Vehicles (OHV)
  • Converting
  • Servo motors
  • Multi-axis control
  • Code conversion
  • Registration mark timing
  • Galvanometer scanners
999
In-stock
Get Quote
TP3064BDW Ultralife

TP3064BDW Overview


As a space saver, it comes in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the packaging method used. This electronic component is of the type PCM, Filter, allowing it to provide high-efficiency performance in various applications. A mounting type of Surface Mount is used for this device. A 0°C~70°C operating performance setting allows it to operate normally. Integrated ADCs / DACs are available in 1 / 1. Supply voltage 4.75V~5.25V is provided to the analog circuit. It receives a voltage of 4.75V~5.25V as its supply voltage. 20 terminations prevent signals from reflecting off transmission lines. It is a kind of 16-pin electronic device. Its base part number TP3064 can be used to find more parts like it. Using the Surface Mount technology, it is mounted to a PCB. Supply voltage should be maintained at 5.25V. There is a subcategory of Codecs for this electronic part. 4.75V should be the minimum value of supply voltage. It operates with the supply voltage of 5V. This device runs on +-5V power supplies. It is necessary to convert digital signals into analog signals by using 1 D/A converters. There are -5V supply voltages that have a more negative polarity than the ground.

TP3064BDW Features


Embedded in the 20-SOIC (0.295, 7.50mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TP3064BDW Applications


There are a lot of Texas Instruments TP3064BDW CODECs Interface ICs applications.

  • Image denoising
  • X-Y positioning
  • Microprocessor
  • Logical circuits
  • Spooling or level wind
  • Half adders
  • Position measurement
  • Oil & gas production
  • Material handling
  • Conveying
999
In-stock
Get Quote
TLV320AIC10IGQER Ultralife

TLV320AIC10IGQER Overview


Due to space constraints, it is supplied in the 80-VFBGA package. It is adopted to package in the manner of Cut Tape (CT). As a type of General Purpose, this electronic part is able to deliver high-efficient performance in various applications. This device employs the mounting type Surface Mount. Using -40°C~85°C as the operating performance allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit is powered by 3V~5.5V. It is supplied with a voltage of 3V~5.5V to power the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 80 terminations. It is a kind of 80-pin electronic device. There are 80 pins configured on this board. The base part number TLV320AIC10 can be used to find related parts. 5.5V should be the maximum value of the supply voltage. The minimum value of supply voltage should be maintained at 3V. Powered by a 3.6V supply voltage, it can run. For the conversion of digital signals into analog ones, 1 D/A converters are used. 16 bits are used to store information.

TLV320AIC10IGQER Features


Embedded in the 80-VFBGA package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs

TLV320AIC10IGQER Applications


There are a lot of Texas Instruments TLV320AIC10IGQER CODECs Interface ICs applications.

  • Automated Guided Vehicles (AGV)
  • Wire number reduction in a particular circuits
  • Detecting interrupts in microprocesstor applications
  • Autonomous vehicles & robots
  • Textiles
  • Translating the decimal values to the binary
  • Linear distance measurement
  • Half adders
  • Semiconductor fabrication
  • Printing
999
In-stock
Get Quote
ETC5054N/H Klein Tools, Inc.

ETC5054N/H Overview


Due to space constraints, it is supplied in the 16-DIP (0.300, 7.62mm) package. It is adopted to package in the Tube way. It can perform highly efficiently in various applications since it is a type of PCM, Filter. The mounting type is Through Hole. Using -25°C~125°C as the operating performance allows it to operate normally. It is integrated with 1 / 2 ADCs / DACs. The analog circuit is provided with the supply voltage of 4.75V~5.25V. This device consists of a row of 16-pins. Using its base part number ETC5054, it can be used to locate parts that are related. Through Hole technology is used for mounting it to a PCB. In order for the supply voltage to be maintained at 5.25V, it should be set to its maximum value. Converting analog signals to digital signals requires 1 A/D converters. Maintaining a minimum voltage of 4.75V is recommended. Operating voltages as low as 5V can be used. Digital signals are converted into analog signals using 1 D/A converters. Keeping the operating temperature at 125°C maintains normal use. In order to keep normal operation, the operating temperature is set as a minimum value of -25°C. Transmission of data takes place over 2 channels. The storage of information is provided by 8 bits. During any given time, a circuit should carry a current of 10μA.

ETC5054N/H Features


Embedded in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

ETC5054N/H Applications


There are a lot of STMicroelectronics ETC5054N/H CODECs Interface ICs applications.

  • Logical circuits
  • Image search
  • Web tensioning
  • Code conversion
  • Applications involving measuring wheels
  • Printing
  • Stagecraft
  • CT and MRI scanning machinery
  • Dynamic applications
  • RF-based home automation system
999
In-stock
Get Quote
TP3057V-X Ultralife

TP3057V-X Overview


A 20-LCC (J-Lead) package is provided to save space. As a packaging method, Tape & Reel (TR) is adopted. It can perform highly efficiently in various applications since it is a type of PCM, Filter. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -25°C~125°C, it is able to operate normally. Integrated ADCs / DACs are available in 1 / 2. ±5V of supply voltage are applied to the analog circuit. The board is configured with 20 pins. More related parts can be found using its base part number TP3057. The chip is mounted to the PCB using the Surface Mount technology. Data transmission is handled by 2 channels. A total of 8 bits are provided for storing information.

TP3057V-X Features


Embedded in the 20-LCC (J-Lead) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs

TP3057V-X Applications


There are a lot of Texas Instruments TP3057V-X CODECs Interface ICs applications.

  • Elevators
  • Mobile equipement
  • Web tensioning
  • Position measurement
  • Ships navigation
  • Dynamic applications
  • Magnetic positional control
  • Textiles
  • Stagecraft
  • Anomaly detection
999
In-stock
Get Quote
TLV320AIC15CDBTG4 Ultralife

TLV320AIC15CDBTG4 Overview


As a space saver, it comes in the 30-TFSOP (0.173, 4.40mm Width) package. It is adopted to package in the manner of Tube. As a type of Voice-Band, this electronic part is able to deliver high-efficient performance in various applications. It employs Surface Mount as its mounting type. Using 0°C~70°C as the operating performance allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit receives 2.7V~3.6V as a supply voltage. A supply voltage of 1.65V~1.95V is applied to the digital circuit. Transmission lines have 30 terminations, which prevent signals from re-emitted. 30-pin electronic devices are what it is. There are 30 pins on this board. Its base part number TLV320AIC15 can be used to find more related items. On a PCB based on Surface Mount technology, it is mounted. 1.95V is the maximum value of supply voltage. Analog signals are converted to digital signals by means of 1 A/D converters. This electronic part is classified into the subcategory of Codecs. It is recommended to maintain a voltage of 1.65V as the minimum value. Voltage 1.8V is used for its power supply. It is designed with 2 channels for data transmission. It is not recommended that the analog input voltage exceeds 2V.

TLV320AIC15CDBTG4 Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC15CDBTG4 Applications


There are a lot of Texas Instruments TLV320AIC15CDBTG4 CODECs Interface ICs applications.

  • Autonomous vehicles & robots
  • Counting applications
  • Textiles
  • Full adders
  • Web tensioning
  • Microprocessor
  • RF-based home automation system
  • Wire number reduction in application that have multiple inputs
  • CPU memory location identification
  • Half adders
999
In-stock
Get Quote
TLV320AIC13IDBTR Ultralife

TLV320AIC13IDBTR Overview


It is supplied in the 30-TFSOP (0.173, 4.40mm Width) package for the purpose of space saving. Tape & Reel (TR) is the packaging method used. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. As far as mounting types are concerned, it uses Surface Mount. Operating performance at -40°C~85°C makes it possible to operate normally. It is integrated with 1 / 1 ADCs / DACs. The analog circuit receives 2.7V~3.6V as a supply voltage. A supply voltage of 1.65V~1.95V is applied to the digital circuit. 30 terminations prevent signals from reflecting off transmission lines. The device has a 30-pin configuration. The pins are configured as 30. Its base part number TLV320AIC13 can be used to find more related items. The chip is mounted to the PCB using the Surface Mount technology. In order for the supply voltage to be maintained at 1.95V, it should be set to its maximum value. There are 1 A/D converters used to convert the analog signals into digital signals. Electronic parts classified as Codecs are located in this subcategory. It is recommended that the minimum supply voltage be kept at 1.65V. The supply voltage is set to 1.8V. The data transmission channel count is 2. Analog input voltages should not exceed 2V.

TLV320AIC13IDBTR Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC13IDBTR Applications


There are a lot of Texas Instruments TLV320AIC13IDBTR CODECs Interface ICs applications.

  • Registration mark timing
  • Metal forming & fabrication
  • Medical & Lab Equipment
  • Dimensionality reduction
  • Position measurement
  • CT and MRI scanning machinery
  • Logical circuits
  • War field flying robot with a using night-vision flying camera
  • Half adders
  • Off-Highway Vehicles (OHV)
999
In-stock
Get Quote
LM4545VH Ultralife

LM4545VH Overview


A 48-LQFP package is supplied for space savings. It is adopted to package in the Tray way. Its Audio, AC '97 type ensures high-efficiency performance in a range of applications. It employs Surface Mount as its mounting type. A -40°C~85°C operating performance setting allows it to operate normally. The unit is integrated with 2 / 2 ADCs / DACs. The analog circuit is powered by 4.2V~5.5V. A supply voltage of 3V~5.5V is applied to the digital circuit. More related parts can be found using its base part number LM4545. Mounted on a PCB based on the technology of Surface Mount. Transmission of data is through 2 channels. To store information, there are 18 bits available.

LM4545VH Features


Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

LM4545VH Applications


There are a lot of Texas Instruments LM4545VH CODECs Interface ICs applications.

  • Applications involving measuring wheels
  • Conveying
  • Multi-axis control
  • Position measurement
  • Web tensioning
  • Translating the decimal values to the binary
  • Microprocessor
  • Medical & Lab Equipment
  • Registration mark timing
  • Full adders
999
In-stock
Get Quote
TLV320AIC15CDBT Ultralife

TLV320AIC15CDBT Overview


Space-saving is achieved by supplying it in the 30-TFSOP (0.173, 4.40mm Width) package. Tube packaging is adopted. Its Voice-Band type ensures high-efficiency performance in a range of applications. The mounting type is Surface Mount. It is able to operate normally when the operating performance is set at 0°C~70°C. It features 1 / 1 ADCs / DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. The digital circuit is provided with the supply voltage of 1.65V~1.95V. Signals are prevented from reflecting off the transmission line's terminations by using 30 terminations. In terms of electronics, it is a 30-pin device. The board is configured with 30 pins. Using its base part number TLV320AIC15, it can be used to locate parts that are related. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 1.95V. To convert analog signals into digital signals, there are 1 A/D converters. There is a subcategory of Codecs for this electronic part. A minimum supply voltage of 1.65V should be maintained. Voltage 1.8V is used for its power supply. For data transmission, the device has 2 channels. There should be no voltage greater than 2V on the analog input.

TLV320AIC15CDBT Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC15CDBT Applications


There are a lot of Texas Instruments TLV320AIC15CDBT CODECs Interface ICs applications.

  • Rotating radar platforms
  • Image compression
  • Semiconductor fabrication
  • Filling
  • Full adders
  • Digital systems
  • Medical industry
  • Wire number reduction in a particular circuits
  • Speed synchronization of multiple motors in industries
  • Electronics industry
999
In-stock
Get Quote
TLV320AIC15CDBTRG4 Ultralife
999
In-stock
Get Quote
TP3057WMX/NOPB Ultralife

TP3057WMX/NOPB Overview


For space-saving purposes, it is packaged in 16-SOIC (0.295, 7.50mm Width). Tape & Reel (TR) packaging method is used. This electronic part is categorized as a type of PCM, Filter, making it capable of providing high-efficiency performance in a variety of applications. This device employs the mounting type Surface Mount. Operating performance -25°C~125°C permits it to function normally. It is equipped with a total of 1 / 2 ADCs and DACs. ±5V of supply voltage are applied to the analog circuit. Signals are prevented from reflecting off the transmission line's terminations by using 16 terminations. 16-pin electronic devices are what it is. There are 16 pins on it. More related parts can be found using its base part number TP3057. Mounted on a PCB based on the technology of Surface Mount. The maximum value of supply voltage should be maintained at 5.25V. There are 1 A/D converters used to convert the analog signals into digital signals. It is classified as a Codecs electronic part. It is recommended that the minimum supply voltage be kept at 4.75V. There is 5V supply voltage for this device. It can be operated from a voltage of 5V. To convert digital signals into analog signals, there are 2 D/A converters. When the supply current is kept below 0.009mA, they work easily. -5V voltage from the supply have a more negative polarity than voltages from the circuit's ground.

TP3057WMX/NOPB Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -25°C~125°C
1 / 2 ADCs / DACs
1 A/D converters

TP3057WMX/NOPB Applications


There are a lot of Texas Instruments TP3057WMX/NOPB CODECs Interface ICs applications.

  • Motor feedback
  • Spooling or level wind
  • Switching function
  • Automatic health monitoring systems
  • Metal forming & fabrication
  • Half adders
  • Registration mark timing
  • Subtraction
  • Servo motors
  • Automation
999
In-stock
Get Quote
TLV320AIC23IPWRG4 Ultralife

TLV320AIC23IPWRG4 Overview


A 28-TSSOP (0.173, 4.40mm Width) package is supplied for space savings. It is adopted to package in the manner of Tape & Reel (TR). Its Stereo Audio type ensures high-efficiency performance in a range of applications. This device employs the mounting type Surface Mount. Operating performance -10°C~70°C permits it to function normally. The board is integrated with 2 / 2 ADCs and DACs. There is a voltage supply of 2.7V~3.6V to the analog circuit. The digital circuit is provided with the supply voltage of 1.42V~3.6V. There are 28 terminations used to prevent signals from reflecting off the end of the transmission line. Essentially, it is an electronic device with 28 pins. There are 28 pins on this board. Its base part number TLV320AIC23 can be used to find more parts like it. It is mounted to a PCB based on the Surface Mount technology. Maintain a maximum voltage of 3.6V. There are 2 A/D converters used to convert the analog signals into digital signals. Electronic parts classified as Other Consumer ICs are located in this subcategory. It is recommended to maintain a voltage of 1.42V as the minimum value. Power supplies of 1.53.3V are used.

TLV320AIC23IPWRG4 Features


Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -10°C~70°C
2 / 2 ADCs / DACs
2 A/D converters

TLV320AIC23IPWRG4 Applications


There are a lot of Texas Instruments TLV320AIC23IPWRG4 CODECs Interface ICs applications.

  • Pulp & paper mills
  • Image denoising
  • Speed synchronization of multiple motors in industries
  • High-performance memory system
  • Autonomous vehicles & robots
  • Wire number reduction in application that have multiple inputs
  • Addition
  • Filling
  • Missing value imputation
  • Medical & Lab Equipment
999
In-stock
Get Quote
TLC320AD77CDBG4 Ultralife

TLC320AD77CDBG4 Overview


For space-saving reasons, it is supplied in a 28-SSOP (0.209, 5.30mm Width) package. We have adopted the packaging method of Tube. Its Stereo Audio type ensures high-efficiency performance in a range of applications. The mounting type is Surface Mount. A 0°C~70°C operating performance setting allows it to operate normally. The unit is integrated with 1 / 1 ADCs / DACs. The analog circuit is powered by 3V~3.6V. There is a supply voltage of 3V~3.6V provided to the digital circuit. To prevent signals from reflecting off of the transmission line, there are 28 terminations. 28-pin electronic devices are what it is. With 28 pins, it is configured. Using its base part number TLC320, it can be used to locate parts that are related. Ideally, the supply voltage should remain at 3.6V. Subcategory Other Consumer ICs applies to this electronic part. Minimum supply voltage should remain at 3V. From a supply voltage of 3.3V, it can operate. Digital signals are converted into analog signals using 2 D/A converters.

TLC320AD77CDBG4 Features


Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs

TLC320AD77CDBG4 Applications


There are a lot of Texas Instruments TLC320AD77CDBG4 CODECs Interface ICs applications.

  • Backstop gauging
  • Linear measurement
  • Position measurement
  • Robotic arms
  • Chemical dosing pumps
  • Robotics
  • Wire number reduction in a particular circuits
  • Motor feedback
  • Textile manufacturing
  • Electronic circuits
999
In-stock
Get Quote
TLC320AC02CFNR Ultralife

TLC320AC02CFNR Overview


In order to save space, it is packaged in the 28-LCC (J-Lead) package. As a packaging method, Tape & Reel (TR) is adopted. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Audio. A mounting type of Surface Mount is used for this device. A performance setting of 0°C~70°C allows it to operate normally. 1 / 1 ADCs and DACs are integrated into it. In the analog circuit, the supply voltage is 4.5V~5.5V. It is supplied with a voltage of 4.5V~5.5V to power the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 28 terminations are used. There are 28 pins on this device. The pins are configured as 28. Its base part number TLC320 can be used to find more related items. Ideally, the supply voltage should remain at 5.5V. It is possible to convert analog signals into digital signals using 1 A/D converters. It is recommended that the minimum supply voltage be kept at 4.5V. In order to operate, it must be supplied with a voltage of 5V. When the supply voltage is 5V, it can operate.

TLC320AC02CFNR Features


Embedded in the 28-LCC (J-Lead) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TLC320AC02CFNR Applications


There are a lot of Texas Instruments TLC320AC02CFNR CODECs Interface ICs applications.

  • Dimensionality reduction
  • Servo motors
  • Robotics vehicle with the metal detector
  • RF-based home automation system
  • Radiation therapy
  • Conveying
  • Material handling
  • Motor feedback
  • Robotics
  • Automatic health monitoring systems
999
In-stock
Get Quote
TLV320AIC10CGQER Ultralife

TLV320AIC10CGQER Overview


Due to space constraints, it is supplied in the 80-VFBGA package. It is adopted to package in the manner of Tape & Reel (TR). This electronic component is of the type General Purpose, allowing it to provide high-efficiency performance in various applications. As a mounting type, it uses Surface Mount. A 0°C~70°C operating performance setting allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit is powered by 3V~5.5V. Supply voltage is set to 3V~5.5V for the digital circuit. There are 80 terminations used to prevent signals from reflecting off the end of the transmission line. In terms of electronics, it is a 80-pin device. The pins are configured as 80. More related parts can be found using its base part number TLV320AIC10. This device is mounted on a PCB which uses the Surface Mount technology. Maintain a maximum voltage of 3.6V. As a result of analog signals being converted into digital signals, there are 1 A/D converters. The minimum value of supply voltage should be maintained at 3V.

TLV320AIC10CGQER Features


Embedded in the 80-VFBGA package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC10CGQER Applications


There are a lot of Texas Instruments TLV320AIC10CGQER CODECs Interface ICs applications.

  • Speed synchronization of multiple motors in industries
  • Stagecraft
  • Backstop gauging
  • Switching function
  • Magnetic positional control
  • Counting applications
  • Timber products
  • Code conversion
  • Web tensioning
  • Linear distance measurement
999
In-stock
Get Quote
LM4550VH/NOPB Ultralife

LM4550VH/NOPB Overview


For space-saving purposes, it is packaged in 48-LQFP. This package uses the Tape & Reel (TR) packaging method. This electronic part is categorized as a type of Audio, AC '97, making it capable of providing high-efficiency performance in a variety of applications. This device employs the mounting type Surface Mount. When the operating performance is set to -40°C~85°C, the system can operate normally. 2 / 2 ADC / DAC is integrated into it. A supply voltage of 4.2V~5.5V is applied to the analog circuit. It is supplied with a voltage of 3V~5.5V to power the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. Essentially, it is an electronic device with 48 pins. By using its base part number LM4550, you can find more related parts. Surface Mount technology is used for mounting it to a PCB. Ideally, the supply voltage should remain at 5.5V. There is a subcategory of Other Consumer ICs for this electronic part. Supply voltage should be maintained at 3V. The power supply for this device is 3.3/55V.

LM4550VH/NOPB Features


Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

LM4550VH/NOPB Applications


There are a lot of Texas Instruments LM4550VH/NOPB CODECs Interface ICs applications.

  • Medical industry
  • Dimensionality reduction
  • Logical circuits
  • Cut-to-length
  • Dynamic applications
  • Stagecraft
  • Feature extraction
  • Motor speed /RPM readout
  • Textiles
  • High-performance memory system
999
In-stock
Get Quote
TLV320AIC20CPFBR Ultralife

TLV320AIC20CPFBR Overview


Space-saving reasons have led to it being packaged in a 48-TQFP package. As a packaging method, Tape & Reel (TR) is adopted. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. This device employs the mounting type Surface Mount. At 0°C~70°C, it can operate normally. 2 / 2 ADC / DAC is integrated into it. 2.7V~3.6V of supply voltage are applied to the analog circuit. The digital circuit is provided with the supply voltage of 1.65V~1.95V. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. The device has 48 pins. The pins are configured as 48. More related parts can be found using its base part number TLV320AIC20. The chip is mounted to the PCB using the Surface Mount technology. Maintain a maximum voltage of 1.95V. Digital signals are converted from analog signals using 2 A/D converters. There is subcategory Codecs for this electronic part. The minimum value of supply voltage should be maintained at 1.65V. In order to operate, it must be supplied with a voltage of 1.8V. A power supply of 1.83.3V is required for operation. In order to transmit data, it is designed with 2 channels. A maximum analog input voltage of 2V should not be exceeded.

TLV320AIC20CPFBR Features


Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters

TLV320AIC20CPFBR Applications


There are a lot of Texas Instruments TLV320AIC20CPFBR CODECs Interface ICs applications.

  • CPU memory location identification
  • Textiles
  • Printing
  • Packaging
  • Robotics vehicle with the metal detector
  • Feature extraction
  • High-performance memory systems
  • High-performance memory-decoding or data-routing applications
  • Image denoising
  • Chemical dosing pumps
999
In-stock
Get Quote
STLC5048 Klein Tools, Inc.
999
In-stock
Get Quote
TLVAIC12KIRHBRG4 Ultralife

TLVAIC12KIRHBRG4 Overview


A VQFN EP package is provided to save space. Tape & Reel (TR) is the packaging method used. To prevent signals from reflecting off of the transmission line, there are 32 terminations. 32-pin electronic devices are what it is. The pins are configured as 32. Maintain a maximum voltage of 3.6V. This electronic part is classified into the subcategory of Codecs. Supply voltage should be maintained at 1.1V. The supply voltage is set to 1.8V. Digital signals are converted into analog signals using 1 D/A converters. 85°C is set as the maximum operating temperature for normal operation. Keeping the operating temperature at -40°C will maintain regular use. Data transmission is achieved through 2 channels. The property IT ALSO REQUIRES 3.3V ANALOG SUPPLY belongs to this type.

TLVAIC12KIRHBRG4 Features


Embedded in the VQFN EP package
IT ALSO REQUIRES 3.3V ANALOG SUPPLY

TLVAIC12KIRHBRG4 Applications


There are a lot of Texas Instruments TLVAIC12KIRHBRG4 CODECs Interface ICs applications.

  • Semiconductor fabrication
  • Full adders
  • Chemical dosing pumps
  • High-performance memory system
  • Ball screw positioning
  • Missing value imputation
  • Image denoising
  • RF-based home automation system
  • Advanced breast cancer treatments
  • Multi-axis control
999
In-stock
Get Quote
TLVAIC12KIRHBTG4 Ultralife

TLVAIC12KIRHBTG4 Overview


Space-saving is achieved by supplying it in the VQFN package. As a packaging method, Tape & Reel (TR) is adopted. Transmission lines have 32 terminations to prevent signals from reflecting. The device has 32 pins. It is configured with 32 pins. Voltage should not exceed 3.6V. A part in this category is classified as subcategory Codecs. It is recommended that the supply voltage is maintained at 1.1V. It operates on a supply voltage of 1.8V. For converting digital signals into analog signals, there are 1 D/A converters. Keeping the operating temperature at 85°C maintains normal use. The operating temperature is set with the minimum value of -40°C to keep normal use. The data transmission channel count is 2. IT ALSO REQUIRES 3.3V ANALOG SUPPLY characterizes it. 2V is the maximum voltage that should be allowed for an analog input.

TLVAIC12KIRHBTG4 Features


Embedded in the VQFN package
IT ALSO REQUIRES 3.3V ANALOG SUPPLY

TLVAIC12KIRHBTG4 Applications


There are a lot of Texas Instruments TLVAIC12KIRHBTG4 CODECs Interface ICs applications.

  • Data transfer
  • Chemical dosing pumps
  • Automatic health monitoring systems
  • Translating the decimal values to the binary
  • Automation
  • Converting
  • High-performance memory-decoding or data-routing applications
  • Semiconductor fabrication
  • Motor feedback
  • Detecting interrupts in microprocesstor applications
999
In-stock
Get Quote
TLV320AIC3104IRHBR Texas Instruments

TLV320AIC3104IRHBR Overview


It is supplied in the 32-VFQFN Exposed Pad package for the purpose of space saving. The packaging way of Tape & Reel (TR) is adopted. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Stereo Audio. Surface Mount is the mounting type employed by this device. It is able to operate normally when the operating performance is set at -40°C~85°C. The board is integrated with 2 / 2 ADCs and DACs. An analog circuit is supplied with a voltage of 2.7V~3.6V. A supply voltage of 1.65V~1.95V is applied to the digital circuit. Transmission lines have 32 terminations, which prevent signals from re-emitted. There are 32 pins on it. The base part number TLV320AIC3104 can be used to find related parts. There is 1.8V supply voltage for this device.

TLV320AIC3104IRHBR Features


Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs

TLV320AIC3104IRHBR Applications


There are a lot of Texas Instruments TLV320AIC3104IRHBR CODECs Interface ICs applications.

  • Ships navigation
  • High-performance memory systems
  • Switching function
  • CNC machining
  • Material handling
  • Radiation therapy
  • Medical industry
  • Registration mark timing
  • Analog to digital conversion in the analog decoder
  • Image search
999
In-stock
Get Quote
TLV320AIC34IZAS Texas Instruments

TLV320AIC34IZAS Overview


In order to save space, it is packaged in the 87-TFBGA package. Tray is the packaging method used. This electronic component is of the type Audio, allowing it to provide high-efficiency performance in various applications. As far as mounting types are concerned, it uses Surface Mount. Operating performance -40°C~85°C permits it to function normally. 4 / 4 ADCs and DACs are integrated into it. An analog circuit is supplied with a voltage of 2.7V~3.6V. A supply voltage of 1.65V~1.95V is applied to the digital circuit. Transmission lines have 87 terminations, which prevent signals from re-emitted. This device consists of a row of 87-pins. It has a configuration of 87 pins. Its base part number TLV320AIC34 can be used to find other parts that are related. This device is mounted on a PCB which uses the Surface Mount technology. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. The minimum value of supply voltage should be maintained at 1.1V. There is 1.8V supply voltage for this device. 1.95V is the supply voltage that it can operate from. The device has 12 analog inputs. 14 analog outputs are available on it. Analog outputs can be sampled from numerical values by 4 DAC channels.

TLV320AIC34IZAS Features


Embedded in the 87-TFBGA package
Operating temperature of -40°C~85°C
4 / 4 ADCs / DACs
12 analog inputs
14 analog outputs

TLV320AIC34IZAS Applications


There are a lot of Texas Instruments TLV320AIC34IZAS CODECs Interface ICs applications.

  • Aerospace
  • CNC machining
  • Detecting interrupts in microprocesstor applications
  • Electronic circuits
  • Conveying
  • Linear distance measurement
  • Robotic arm positioning
  • Servo motors
  • Backstop gauging
  • Translating the decimal values to the binary
999
In-stock
Get Quote

Please send RFQ , we will respond immediately.