Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | CD74HC4538M96G4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type is Surface Mount.There is a Monostable included in the logic type of the part.The vote is delivered within the zone 2V~6V.This electrical component is included in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.A 74HC4538-family component is used to design the component.As a whole, it has 16 terminations.Voltages in the 4.5V range can be handled.A data or clock input can be connected to it through the 2 input.Part 16 has a total of four pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins that are available for use.The device is mounted by Surface Mount.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.A quiescent current is consumed at 8μA by it.5V voltage is specified for the chip's operating supply.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.A device such as this can deliver an output current of 5.2mA to the input current.IC chips have a total number of bits of 2, which is the total number of bits on the chip.A 2 element is present in it.There is a recommendation to run the power supply current under 0.08mA.Packaged by TR is the part. CD74HC4538M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538M96G4 ApplicationsThere are a lot of Texas Instruments CD74HC4538M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC123M96G4 OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tape & Reel (TR).Surface Mount mounting is recommended.This part has Monostable as its logic type.Multivibrator is supplied votage wMultivibratorhin 2V~6V.This electrical component is included in the 74HC series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.Multivibrator is observed that the current output of 5.2mA 5.2mA is low, while the voltage output of 5.2mA 5.2mA is high.Based on the 74HC123 family, the component is designed.The total number of terminations is 16.4.5V voltage can be handled by it.As well as having 2 inputs for clocks and data, it also has a 2 output.There are a total of 16 16 pins on the part.The HC/UH family is what it belongs to.In the part, there are 16 pins.The device is mounted by Surface Mount.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.8μA consumes quiescent current.Specifically, 5V volts are the operating supply voltage.The chip runs properly with a voltage supply of 6V volts.There is a limit to how much current the device can supply in terms of output current.2 is the total number of bits on an IC chip.You can search the additional features of the part: RETRIGGERABLEThe element has 2 elements.Using 0.08mA is recommended for power supply current.As far as packaging is concerned, TR is responsible. CD74HC123M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC123M96G4 ApplicationsThere are a lot of Texas Instruments CD74HC123M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 74LVC1G123DCURG4 OverviewIn this case, the product is packaged in a 8-VFSOP (0.091, 2.30mm Width) case.Pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.This part has Monostable as its logic type.There is a supply of votage within 1.65V~5.5V hours.A 74LVC series component includes this electrical component.Unless otherwise specified, this part must operate at no lower than -40°C~125°C degrees Celsius.32mA 32mA's current output is low and its voltage output is high.Designed based on the 74LVC1G123 family, the component features a number of features.In the part, there are 8 pins.Surface Mount mounts the device on top of the base.There is a quiescent current consumption at 20μA.There is a 5V volt specification for the chip's operating supply voltage.The element has 1 elements. 74LVC1G123DCURG4 Featuresin 8-VFSOP (0.091, 2.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCURG4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCURG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT423MTG4 OverviewIn this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).The recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.The vote is delivered within the zone 4.5V~5.5V.A 74HCT series component includes this electrical component.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.There is a small current output of 4mA 4mA while there is a large voltage output from 4mA 4mA.As far as the design is concerned, the component is based on the 74HCT423 family of components.Total 16 terminations are present.There is no problem with the device handling the 5V voltage.Data or clock inputs can be accessed via 2 inputs.There are a total of 16 16 pins on the part.This is a part of the HCT family of computers.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on top of the base.There is a quiescent current consumption at 8μA.Specifically, 5V volts are the operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 4mA.Integrated circuit can provide voltage up to 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.The part's additional features can be searched here: RETRIGGERABLEThe element consists of 2 elements.0.08mA is the recommended power supply current.Designed and packaged by TR. CD74HCT423MTG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT423MTG4 ApplicationsThere are a lot of Texas Instruments CD74HCT423MTG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC221M96E4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case in which it is packaged.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.There is a logic type Monostable associated with the part.Votage is provided within a specified period of time within 2V~6V.The 74HC series include this electrical component.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Voltage output of 5.2mA 5.2mA exceeds current output.As far as the design is concerned, the component is based on the 74HC221 family of components.Multivibrator has 16 terminations in total.There is no problem handling voltages up to 4.5V.There is a 2 input for data or a clock input on this board.Multivibrator has a total of six 16 pins.The product belongs to the family of HC/UH products.The part includes 16 pins.Multivibrator is mounted by Surface Mount.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.A quiescent current is consumed at 8μA by it.Specifically, 5V volts are the operating supply voltage.Chips like this one require 6V volts to run properly.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.IC chips contain 2 bits in total.The element has 2 elements.Integrated circuit is recommended that the power supply current run under 0.08mA.Integrated circuit is packaged by TR. CD74HC221M96E4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221M96E4 ApplicationsThere are a lot of Texas Instruments CD74HC221M96E4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV123ATPWRQ1 Overview16-TSSOP (0.173, 4.40mm Width) cases contain the product.In case of Tape & Reel (TR), the equipment should be packed.Surface Mount is recommended for mounting.The part's logic type includes Monostable.The vote is delivered within the zone 2V~5.5V.Automotive, AEC-Q100, 74LV series electric components include this component.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~105°C.Multivibrator causes 12mA 12mA low,high output current.This component has been designed based on the 74LV123 family of components.There are a total of 16 terminations on it.There is no problem with the device handling the 3.3V voltage.Data or clock inputs can be accessed via 2 inputs.As a whole, there are ten 16 pins on this part.It belongs to LV/LV-A/LVX/H family.In this part, you can find 16 pins.In this case, the device is mounted by Surface Mount.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.As a result, quiescent current is consumed at 20μA.5V volts is the chip's operating supply voltage.Integrated circuit can give voltage at 3.3V volts.An IC chip is made up of 2 bits in total.The element has 2 elements.Parts are packaged by TR. SN74LV123ATPWRQ1 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: Automotive, AEC-Q100, 74LV based on 74LV123 Supply Voltage: 3.3V Quiescent Current at 20μA 2 bits SN74LV123ATPWRQ1 ApplicationsThere are a lot of Texas Instruments SN74LV123ATPWRQ1 applications of multivibrators.
|
8124
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV123ADG4 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.When packing equipment for Tube, it is advisable to take it along with you.Surface Mount is recommended for mounting.The logic type of the part includes Monostable.Multivibrator is supplied votage wMultivibratorhin 2V~5.5V.74LV series electric components include this component.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.Multivibrator causes 12mA 12mA low,high output current.This component has been designed based on the 74LV123 family of components.There are a total of 16 terminations on it.Voltages in the 2.5V range can be handled.Data or clock inputs are available on 2 inputs.Multivibrator has a total of six 16 pins.Multivibrator is a member of the LV/LV-A/LVX/H family.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on the wall.Minimum supply voltage should be greater than 2V.During quiescent time, it consumes current at 20μA.5V volts of voltage is required to run this chip.The output current that can be supplied to the device is 12mA.Voltage can be delivered at 3.3V volts by it.The total amount of bits on an IC chip is 2.An element with 2 elements can be found in it. SN74LV123ADG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ADG4 ApplicationsThere are a lot of Texas Instruments SN74LV123ADG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHC123ADGVRE4 Overview16-TFSOP (0.173, 4.40mm Width) cases contain the product.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.As part of the logic type, Monostable is included.Votage is provided within a specified period of time within 2V~5.5V.74AHC series electric components include this component.In order for this part to operate properly, the minimum operating temperature should not be -40°C~85°C.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.Based on the 74AHC123 family, the component is designed.There are a total of 16 terminations on it.The device is capable of handling voltages up to 3.3V.A data or clock input can be connected to it through the 2 input.There are a total of ten 16 pins on the part.The AHC/VHC/H/U/V family is what it belongs to.Parts of the part have 16 pins.Multivibrator is mounted by Surface Mount.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.In the state of quiescence, it consumes a lot of current at 4μA.5V volts is the chip's operating supply voltage.The output current that can be supplied to the device is 8mA.2 is the total number of bits on an IC chip.Integrated circuit contains 2 elements.Under 0.04mA, it is recommended to run the power supply current.Packaging is handled by TR. SN74AHC123ADGVRE4 Featuresin 16-TFSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123ADGVRE4 ApplicationsThere are a lot of Texas Instruments SN74AHC123ADGVRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC423M96G4 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is provided in a quantMultivibratory of 2V~6V.Electrical components of this type are included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Multivibrator causes 5.2mA 5.2mA low,high output current.This component has been designed based on the 74HC423 family of components.Total 16 terminations are present.The device is capable of handling voltages up to 4.5V.Data and clock inputs are provided through 2 inputs.There are a total of 16 16 pins on the part.There is a HC/UH family member.In the part, there are 16 pins.By mounting the device, Surface Mount provides a secure connection.The necessary minimum supply voltage ought to be greater than 2V.At 8μA, it consumes a small amount of quiescent current.There is a 5V volt specification for the chip's operating supply voltage.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.A device such as this can deliver an output current of 5.2mA to the input current.In an IC chip, there are 2 bits.Additional features of the part can be found by searching: RETRIGGERABLEIntegrated circuit consists of 2 elements.Under 0.08mA, it is recommended to run the power supply current.TR is the company responsible for packaging the part. CD74HC423M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423M96G4 ApplicationsThere are a lot of Texas Instruments CD74HC423M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC4538MG4 Overview16-SOIC (0.154, 3.90mm Width) cases package it.The equipment should be packed in case of Tube, so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.Part Monostable includes logic type Monostable.During the period of 2V~6V, it is supplied with the required amount of votes.These electrical components can be found in the 74HC series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.Based on the 74HC4538 family, the component is designed.There are a total of 16 terminations on it.Multivibrator is capable of handling voltages up to 4.5V.Data or clock inputs are available on 2 inputs.Multivibrator has a total of six 16 pins.The family HC/UH is represented by it.16 pins are included in the specification for the part.As shown in the picture, Surface Mount is mounting the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.8μA consumes quiescent current.5V volts of voltage is required to run this chip.As a result, this chip needs a voltage supply of 6V volts for it to work properly.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.IC chips have 2 bits total.The element consists of 2 components.Under 0.08mA, the power supply current should be run. CD74HC4538MG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538MG4 ApplicationsThere are a lot of Texas Instruments CD74HC4538MG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS122DRE4 OverviewThe product comes in a 14-SOIC (0.154, 3.90mm Width) case.If Tape & Reel (TR) happens, pack the equipment accordingly.You should mount it with a Surface Mount type.Part Monostable includes logic type Monostable.Multivibrator is supplied votage wMultivibratorhin 4.75V~5.25V.Multivibrator is included in the 74LS series of electrical components.The minimum operating temperature of this part must not be 0°C~70°C.Multivibrator causes 400μA 8mA low,high output current.A component based on the 74LS122 family is designed.14 terminations are present in total.Multivibrator can handle 5V voltage.A data or clock input can be connected to it through the 4 input.14 pins are present on the part in total.The LS family is responsible for it.The part includes 14 pins.By mounting the device, Surface Mount provides a secure connection.Integrated circuit consumes quiescent current at 6mA.There is a 5V volt specification for the chip's operating supply voltage.The output current that can be supplied to the device is 8mA.Integrated circuit can provide voltage up to 5V volts.In an IC chip, there are 2 bits.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLEIntegrated circuit is packaged by TR. SN74LS122DRE4 Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS122 Supply Voltage: 5V Quiescent Current at 6mA output current at 8mA 2 bits SN74LS122DRE4 ApplicationsThere are a lot of Texas Instruments SN74LS122DRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4047BMG4 OverviewA 14-SOIC (0.154, 3.90mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Surface Mount is recommended for mounting.There is a Astable, Monostable included in the logic type of the part.During the period of 3V~18V, it is supplied with the required amount of votes.This electrical component is included in the 4000B series.Multivibrator is recommended that this part does not operate at a minimum temperature of -55°C~125°C.Multivibrator causes 6.8mA 6.8mA low,high output current.As far as the design is concerned, the component is based on the CD4047 family of components.The total number of terminations of this device is 14.Voltages in the 5V range can be handled.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator has a total of six 14 pins.14 pins are available on the part.By mounting the device, Surface Mount provides a secure connection.Integrated circuit is essential that the minimum supply voltage be greater than 3V in order to ensure that the supply voltage exceeds 3V.During quiescent time, it consumes current at 20μA.12V volts is the operating supply voltage for the chip.There is a limit to how much current the device can supply in terms of output current.The total amount of bits on an IC chip is 1.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLEThere are 1 elements in it.Integrated circuit is recommended that the power supply current run under 0.06mA. CD4047BMG4 Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Astable, Monostable Operating Temperature: 4000B based on CD4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA 1 bits CD4047BMG4 ApplicationsThere are a lot of Texas Instruments CD4047BMG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT221EG4 OverviewPackaged in a 16-DIP (0.300, 7.62mm) case, it comes with a guarantee.Multivibrator is advised to pack the equipment in case of Tube.The recommended mounting type for this product is Through Hole.The logic type of the part includes Monostable.Votage is supplied within a period of time called 4.5V~5.5V.The 74HCT series include this electrical component.A minimum operating temperature of -55°C~125°C must not be reached by this part.4mA 4mA's current output is low and its voltage output is high.In this component, the 74HCT221 family is used as the basis for design. CD74HCT221EG4 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 CD74HCT221EG4 ApplicationsThere are a lot of Texas Instruments CD74HCT221EG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC123PWRE4 Overview16-TSSOP (0.173, 4.40mm Width) cases package it.In case of Tape & Reel (TR), the equipment should be packed.Multivibrator recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.Multivibrator is provided in a quantMultivibratory of 2V~6V.Electrical components of this type are included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.5.2mA 5.2mA's current output is low and its voltage output is high.74HC123 is the basis for the design of the component.Multivibrator has 16 terminations in total.You can use it with 4.5V voltage.As well as having 2 inputs for clocks and data, it also has a 2 output.Part 16 has a total of four pins.A member of the HC/UH family, it has a number of characteristics.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on top of the base.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.As 8μA increases, it consumes more quiescent current.Its operating supply voltage is 5V volts.As a result, this chip needs a voltage supply of 6V volts for it to work properly.There is a limit to how much current the device can supply in terms of output current.IC chips have a total number of bits of 2, which is the total number of bits on the chip.Using the search bar, you can find the additional features of the part: RETRIGGERABLE.2 elements are included in it.Under 0.08mA, it is recommended to run the current from the power supply.Integrated circuit is packaged by TR. CD74HC123PWRE4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC123PWRE4 ApplicationsThere are a lot of Texas Instruments CD74HC123PWRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS221DRE4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.As a precaution, it is advisable to pack the equipment in case something goes wrong.Mounting type Surface Mount is the recommended one for this device.There is a Monostable included in the logic type of the part.Votage is supplied within a period of time called 4.75V~5.25V.Multivibrator is one of the electrical components that is included in the 74LS series.There is a minimum operating temperature that cannot be exceeded by this part.Compared to the voltage output, the current output of 400μA 8mA is low.Multivibrator is designed on the basis of the 74LS221 family of components.As a result, it has a total of 16 terminations.There is no problem handling voltages up to 5V.It has 2 inputs for data or clock.Part 16 has a total of four pins.A member of the LS family, it has a number of characteristics.16 pins are included in the specification for the part.Surface Mount is used to mount the device.At 4.7mA, it consumes a small amount of quiescent current.Its operating supply voltage is 5V volts.There is a limit to the amount of output current that can be supplied to the device by 8mA.Using it, you can get voltage at 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.Integrated circuit consists of 2 elements.TR is the company that packages the part. SN74LS221DRE4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS221 Supply Voltage: 5V Quiescent Current at 4.7mA output current at 8mA 2 bits SN74LS221DRE4 ApplicationsThere are a lot of Texas Instruments SN74LS221DRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 74LVC1G123DCTTG4 OverviewThere is a 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) case packaging.If Tape & Reel (TR) happens, pack the equipment accordingly.The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.There is a vote within 1.65V~5.5V.74LVC series electric components include this component.Multivibrator is not permMultivibratorted to operate this part below -40°C~125°C°F.Despite the high voltage output, 32mA 32mA outputs a low current.Multivibrator is designed on the basis of the 74LVC1G123 family of components.In this part, you can find 8 pins.In this case, the device is mounted by Surface Mount.A quiescent current is consumed at 20μA by it.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.1 elements are included in it.With this device, it is possible to supply currents up to 20μA in maximum. 74LVC1G123DCTTG4 Featuresin 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCTTG4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCTTG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV221ADG4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator recommended mounting type is Surface Mount.A part's logic type includes Monostable as part of its logic.The vote is delivered within the zone 2V~5.5V.The 74LV series include this electrical component.A minimum operating temperature of -40°C~85°C must not be reached by this part.In the case of 12mA 12mA, the current output is low, while the voltage output is high.As far as the design is concerned, the component is based on the 74LV221 family of components.Total 16 terminations are present.You can use it with 2.5V voltage.Data or clock inputs are available on 2 inputs.Multivibrator consists of a total of five 16 pins on the part.A member of the LV/LV-A/LVX/H family, it has a number of characteristics.In the part, there are 16 pins.The device is mounted by Surface Mount.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.20μA consumes quiescent current.To function properly, this chip requires a voltage supply of 5V volts.A device can be supplied with a current of output named 12mA if the output voltage is set appropriately.IC chips have 2 bits total.Integrated circuit consists of 2 elements. SN74LV221ADG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221ADG4 ApplicationsThere are a lot of Texas Instruments SN74LV221ADG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | 74HCT423N,112 OverviewThe product is packaged in a 16-DIP (0.300, 7.62mm) case.If Tube happens, pack the equipment accordingly.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.As part of the logic type, Monostable is included.Votage is provided within a specified period of time within 4.5V~5.5V.These electrical components can be found in the 74HCT series.Unless otherwise specified, this part must operate at no lower than -40°C~125°C degrees Celsius.The output of 4mA 4mA is low in terms of current while it is high in terms of voltage.The component is designed based on the 74HCT423 family.Total 16 terminations are present.5V voltage can be handled by this device.There are 2 inputs for data and clock.16 pins are present on the part in total.There is a HCT family member.Multivibrator is necessary to have a higher minimum supply voltage than 4.5V.In order for this chip to function correctly, it is required a voltage supply of 5.5V volts.This device is capable of giving voltages up to 5V volts.Using the search bar, you can find the additional features of the part: RETRIGGERABLE.As far as the electronic component is concerned, it belongs to the Prescaler/Multivibrators family. 74HCT423N,112 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 74HCT423N,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT423N,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC4538QPWRQ1 OverviewIn this case, the product is packaged in a 16-TSSOP (0.173, 4.40mm Width) case.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is provided in a quantMultivibratory of 2V~6V.This electrical component is included in the Automotive, AEC-Q100, 74HC series.During the operation of this part, the minimum operating temperature must not exceed -40°C~125°C degrees Celsius.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.A component based on the 74HC4538 family is designed.Multivibrator has 16 terminations in total.Multivibrator is possible for the device to handle the 4.5V voltage.It has 2 inputs for data or clock.Multivibrator has a total of six 16 pins.A member of the HC/UH family, it has a number of characteristics.The part includes 16 pins.Surface Mount is used to mount the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.There is a quiescent current consumption at 8μA.There is a 5V volt specification for the chip's operating supply voltage.In order for this chip to perform correctly, it needs a voltage supply of 6V volts.IC chips have a total number of bits of 2, which is the total number of bits on the chip.In this case, it contains 2 elements.The power supply current is suggested to run under 0.08mA.This part is packaged by a company called TR. CD74HC4538QPWRQ1 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: Automotive, AEC-Q100, 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA 2 bits CD74HC4538QPWRQ1 ApplicationsThere are a lot of Texas Instruments CD74HC4538QPWRQ1 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | M74HC123B1R OverviewA 16-DIP (0.300, 7.62mm) case holds the product.Keeping equipment packed in case of Tube is a good idea.Through Hole is recommended for mounting.The logic type of the part includes Monostable.We supply it within 2V~6V.These electrical components can be found in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.In this component, the M74HC123 family is used as the basis for design.There are a total of 16 terminations on it.Multivibrator can handle 4.5V voltage.There is a 2 input for data or a clock input on this board.The part has a total of 16 pins.The product belongs to the family of HC/UH products.16 pins are available on the part.Through Hole mounts the device on top of the base.Supply voltages must be higher than 2V to meet the minimum requirement.4μA consumes quiescent current.The operating supply voltage for the chip is specified as 5V volts.The chip runs properly with a voltage supply of 6V volts.The output current that can be supplied to the device is 5.2mA.Additional features of the part can be found by searching: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOThe element consists of 2 components.As long as you supply it with a maximum current of 4μA, it will be able to function properly. M74HC123B1R Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on M74HC123 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC123B1R ApplicationsThere are a lot of STMicroelectronics M74HC123B1R applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | 74HC221D,652 OverviewIn this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tube.You should mount it with a Surface Mount type.There are two logic types for this part, Logic Type A and Logic Type B.Votage is supplied within a period of time called 2V~6V.Multivibrator is included in the 74HC series of electrical components.There must not be a minimum operating temperature of -40°C~125°C for this part.Multivibrator causes 5.2mA 5.2mA low,high output current.A 74HC221-family component is used to design the component.Total 16 terminations are present.There is no problem handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.16 pins are present on the part in total.The HC/UH family is responsible for it.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 6V volts in order to operate properly.Here is a search engine you can use to search for additional features of the part: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOElectronic parts of this product are part of the Prescaler/Multivibrators series. 74HC221D,652 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 5V 74HC221D,652 ApplicationsThere are a lot of NXP USA Inc. 74HC221D,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | HCF4538M013TR Overview16-SOIC (0.154, 3.90mm Width) cases package it.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.As part of the logic type, Monostable is included.Voting is provided within the stipulated timeframe.There is an electrical component in the 4000 series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.Multivibrator is observed that the current output of 6.8mA 6.8mA is low, while the voltage output of 6.8mA 6.8mA is high.HCF4538 is the basis for the design of the component.As a result, it has a total of 16 terminations.You can use it with 5V voltage.The device has a 2 input for clocks or data.Multivibrator has a total of six 16 pins.Parts of the part have 16 pins.The device is mounted by Surface Mount.Minimum supply voltage should be greater than 3V.At 100μA, it consumes a small amount of quiescent current.Its operating supply voltage is 12V volts.The output current that can be supplied to the device is 6.8mA.Depending on the voltage, it can provide voltage in the range of 5/15V volts.RETRIGGERABLE is the part's additional features search field.There are 2 elements in it. HCF4538M013TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000 based on HCF4538 Supply Voltage: 5V Quiescent Current at 100μA output current at 6.8mA HCF4538M013TR ApplicationsThere are a lot of STMicroelectronics HCF4538M013TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | 74HCT4538N,112 OverviewThe product is packaged in a 16-DIP (0.300, 7.62mm) case.In case of Tube, the equipment should be packed.The recommended mounting type for this product is Through Hole.The logic type of the part includes the letter Monostable in its name.The vote is delivered within the zone 4.5V~5.5V.There is an electrical component included in the 74HCT series.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~125°C.There is a small current output of 4mA 4mA while there is a large voltage output from 4mA 4mA.In this component, the 74HCT4538 family is used as the basis for design.Overall, it has 16 terminations.5V voltage can be handled by this device.There is a 2 input for data or a clock input on this board.There are a total of ten 16 pins on the part.It belongs to HCT family.Integrated circuit is essential that the minimum supply voltage be greater than 4.5V in order to ensure that the supply voltage exceeds 4.5V.If you would like your chip to run properly, it requires a voltage supply of 5.5V volts to operate.Integrated circuit can provide voltage up to 5V volts.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLEThis electronic part belongs to the Prescaler/Multivibrators family. 74HCT4538N,112 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT4538 Supply Voltage: 5V 74HCT4538N,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT4538N,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | M74HC123RM13TR Overview16-SOIC (0.154, 3.90mm Width) cases contain the product.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.The recommended mounting type for this product is Surface Mount.There is a logic type Monostable associated with the part.We supply it within 2V~6V.The 74HC series include this electrical component.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.Multivibrator is designed on the basis of the M74HC123 family of components.Total 16 terminations are present.There is no problem handling voltages up to 4.5V.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator consists of a total of five 16 pins on the part.The product belongs to the family of HC/UH products.Parts of the part have 16 pins.Surface Mount mounts the device on the wall.Minimum supply voltage should be greater than 2V.Its operating supply voltage is 5V volts.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.The output current that can be supplied to the device is 5.2mA.Using the search bar, you can find the additional features of the part: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSO. M74HC123RM13TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on M74HC123 Supply Voltage: 4.5V output current at 5.2mA M74HC123RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC123RM13TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | 74HCT221DB,118 OverviewA 16-SSOP (0.209, 5.30mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Surface Mount mounting is recommended.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 4.5V~5.5V.These electrical components can be found in the 74HCT series.The minimum operating temperature of this part must not be -40°C~125°C.In the case of 4mA 4mA, the current output is low, while the voltage output is high.This component has been designed based on the 74HCT221 family of components.Overall, it has 16 terminations.There is no problem handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.16 pins are located on the part in total.The HCT family is responsible for it.Supply voltages must be higher than 4.5V to meet the minimum requirement.This part's maximum supply voltage (Vsup) should not exceed 5.5V volts.Voltage can be delivered at 5V volts by it.This part also has the following extra features that you may be interested in: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOElectronic parts of this product are part of the Prescaler/Multivibrators series. 74HCT221DB,118 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V 74HCT221DB,118 ApplicationsThere are a lot of NXP USA Inc. 74HCT221DB,118 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV221APW OverviewThe product is packaged in a 16-TSSOP (0.173, 4.40mm Width) case.In case of Tube, you should pack the equipment.Surface Mount mounting is recommended.A part's logic type includes Monostable as part of its logic.There is a vote within 2V~5.5V.The 74LV series include this electrical component.Unless otherwise specified, this part must operate at no lower than -40°C~85°C degrees Celsius.Multivibrator is observed that the current output of 12mA 12mA is low, while the voltage output of 12mA 12mA is high.This component has been designed based on the 74LV221 family of components.The total number of terminations of this device is 16.Voltages in the 2.5V range can be handled.Data or clock inputs can be accessed via 2 inputs.There are a total of 16 16 pins on the part.There is a LV/LV-A/LVX/H family member.In the part, there are 16 pins that are available for use.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.A quiescent current is consumed at 20μA by it.The operating supply voltage for the chip is specified as 5V volts.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 12mA.This device is capable of giving voltages up to 3.3V volts.The total amount of bits on an IC chip is 2.Integrated circuit consists of 2 elements. SN74LV221APW Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221APW ApplicationsThere are a lot of Texas Instruments SN74LV221APW applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | M74HC4538B1R OverviewThere is a 16-DIP (0.300, 7.62mm) case packaging.In case of Tube, you should pack the equipment.Mounting type Through Hole is the recommended one for this device.As part of the logic type, Monostable is included.There is a supply of votage within 2V~6V hours.Electrical components of this type are included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Voltage output of 5.2mA 5.2mA exceeds current output.In this component, the M74HC45 family is used as the basis for design.As a result, it has a total of 16 terminations.There is no problem handling voltages up to 4.5V.A data or clock input can be connected to it through the 2 input.16 pins are located on the part in total.HC/UH family is the family that it belongs to.16 pins are included in the specification for the part.By mounting the device, Through Hole provides a secure connection.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.As a result, quiescent current is consumed at 4μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.Input current to the device is 5.2mA.RETRIGGERABLE is the part's additional features search field.Integrated circuit consists of 2 elements.There is a maximum current that the device can handle of 4μA amps. M74HC4538B1R Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on M74HC45 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC4538B1R ApplicationsThere are a lot of STMicroelectronics M74HC4538B1R applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | 74HCT423D,112 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tube.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There is a logic type Monostable associated with the part.Votage is provided within a specified period of time within 4.5V~5.5V.The 74HCT series include this electrical component.Unless otherwise specified, this part must operate at no lower than -40°C~125°C degrees Celsius.There is a small current output of 4mA 4mA while there is a large voltage output from 4mA 4mA.As far as the design is concerned, the component is based on the 74HCT423 family of components.There are a total of 16 terminations on it.Multivibrator is capable of handling voltages up to 5V.There is a 2 input for data or a clock input on this board.16 pins are located on the part in total.This is a part of the HCT family of computers.Multivibrator is necessary to have a higher minimum supply voltage than 4.5V.The chip runs properly with a voltage supply of 5.5V volts.There is a possibility that it can provide voltage at a voltage level of 5V volts.You can search the additional features of the part: RETRIGGERABLEThis electronic part is a member of the Prescaler/Multivibrators family. 74HCT423D,112 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 74HCT423D,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT423D,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | HCF4098BEY OverviewIn this case, the product is packaged in a 16-DIP (0.300, 7.62mm) case.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator is recommended to mount Multivibrator on a Through Hole-axis.There is a Monostable included in the logic type of the part.Votage is provided within a specified period of time within 3V~20V.Electrical components of this type are included in the 4000B series.A minimum operating temperature of -55°C~125°C must not be reached by this part.6.8mA 6.8mA's current output is low and its voltage output is high.A HCF4098-family component is used to design the component.Total 16 terminations are present.Multivibrator is capable of handling voltages up to 5V.It has 2 inputs for data or clock.Part 16 has a total of four pins.It belongs to 4000/14000/40000 family.In the part, there are 16 pins that are available for use.Using Through Hole, the device is mounted to the surface.The necessary minimum supply voltage ought to be greater than 3V.During quiescent time, it consumes current at 20μA.There is a 12V volt specification for the chip's operating supply voltage.There is a limit on the amount of output current that can be provided to the device, which is called 6.8mA.Integrated circuit can give voltage at 3/15V volts.You can search the additional features of the part: RETRIGGERABLEA 2 element is present in it.With this device, it is possible to supply currents up to 20μA in maximum. HCF4098BEY Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 4000B based on HCF4098 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA HCF4098BEY ApplicationsThere are a lot of STMicroelectronics HCF4098BEY applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74121NSR OverviewThe product comes in a 14-SOIC (0.209, 5.30mm Width) case.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 4.75V~5.25V.This electrical component is included in the 7400 series.During the operation of this part, the minimum operating temperature must not exceed 0°C~70°C degrees Celsius.400μA 16mA's current output is low and its voltage output is high.Designed based on the SN74121 family, the component features a number of features.Multivibrator has 14 terminations in total.Multivibrator can handle 5V voltage.Data or clock inputs can be accessed via 3 inputs.There are a total of 16 14 pins on the part.Parts of the part have 14 pins.Surface Mount is used to mount the device.5V volts of voltage is required to run this chip.Voltage can be provided at 5V volts by this device. SN74121NSR Featuresin 14-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 7400 based on SN74121 Supply Voltage: 5V SN74121NSR ApplicationsThere are a lot of Texas Instruments SN74121NSR applications of multivibrators.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.