Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | TL494CPWR OverviewIt comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Cut Tape (CT) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 7V~40V is the operating voltage and supply voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. There is a switch at 1kHz~300kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of 16 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "TL494". There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. 7V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 40V voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 300kHz Hz. During dormancy, the dc switching uses 7.5mA. This voltage controller requires a supply voltage of 15V. TL494CPWR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz TL494CPWR ApplicationsThere are a lot of Texas Instruments TL494CPWR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TL594CNSR OverviewThis switching controller fits most application requirements since it is packaged in a 16-SOIC (0.209, 5.30mm Width) package. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. Worked in a 0°C~70°C TA dc switcher before. The switching controller can be switched at 1kHz~300kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Other relevant dc to dc converter ics will be returned if you search "TL594". Total pins of switching converter are 16. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 7V. DC regulator outputs 40V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 300kHz Hz. This voltage controller requires a supply voltage of 15V. TL594CNSR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz TL594CNSR ApplicationsThere are a lot of Texas Instruments TL594CNSR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | UC2842BD1013TR OverviewCapsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 10V~30V and has a 10V~30V supply voltage. Worked in a -25°C~85°C TA dc switcher before. Switching can be done at Up to 500kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Various 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. UC2842 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 5.05V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 500kHz is set for the switching controller. 30V is the nominal working voltage. UC2842BD1013TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 500kHz UC2842BD1013TR ApplicationsThere are a lot of STMicroelectronics UC2842BD1013TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | UC3842BD1013TR OverviewWith its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 10V~30V. Worked in an dc switcher with a 0°C~70°C TJ rating. Using this switching controller, it is possible to switch at Up to 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 8 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. A search for "UC3842" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 5.1V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 500kHz is set for the switching controller. Input voltage can be set to 30V for nominal working status. Continually operating at more than 17mA may cause malfunctions and damage to the component. UC3842BD1013TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 500kHz UC3842BD1013TR ApplicationsThere are a lot of STMicroelectronics UC3842BD1013TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SG3524NSR OverviewWith a 16-SOIC (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~40V. Qualified to work in an dc switcher with 0°C~70°C TA. Switching can be done at 450kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. Searching "SG3524" will return other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 8V. Based on the test statistics, DC regulator outputs voltage 18V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 50mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. 722kHz is the frequency of the switching controller. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. SG3524NSR FeaturesTransistor Driver Outputs Switching Frequency: 450kHz Current Limit, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 722kHz SG3524NSR ApplicationsThere are a lot of Texas Instruments SG3524NSR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
APS | MIC2101YML-TR OverviewCapsuled in the 16-VFQFN Exposed Pad package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 200kHz~600kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good which allows efficient switching control. You can find other relevant dc to dc converter ics by searching "MIC2101". 16 pins are present on switching converter. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. It is set to 85 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A temperature -40°C lower than -40°C should be maintained. There should be 125°C more than 125°C degrees Celsius in the machine. It belongs to the HyperLight Load? series of dc to dc voltage regulator. There is 16-MLF? (3x3) dc dc controller package associated with this part. This controller switches with 1 phases. For high-quality communication, there are 1 channels. Switching voltage regulators is rated 38V in terms of maximum supply voltage. MIC2101YML-TR FeaturesTransistor Driver Outputs Switching Frequency: 200kHz~600kHz Current Limit, Enable, Frequency Control, Power Good Max Duty Cycle: 85 % MIC2101YML-TR ApplicationsThere are a lot of Microchip Technology MIC2101YML-TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TL2843BQDRQ1 OverviewAs a result of 14-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. In this switching controller, the switch can be set to Up to 500kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 14 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. In addition to "TL2843", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5V voltage. The dc to dc regulator can only accept 30V input voltage. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series. There must be a voltage supply of 15V volts. TL2843BQDRQ1 FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % TL2843BQDRQ1 ApplicationsThere are a lot of Texas Instruments TL2843BQDRQ1 DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3842D8TR OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). A 12V~28V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a 0°C~70°C TA. This switching controller can switch at Up to 500kHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "UC3842". Pins number 8 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13.5V. If you start a project, note down the dc dc regulator's usual output current of 200mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Switching controllers work at 450kHz Hz. For nominal working status, the input voltage can be set as 25V. It is important that the controller is supplied with 25mA more than 25mA volts of current. UC3842D8TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 450kHz UC3842D8TR ApplicationsThere are a lot of Texas Instruments UC3842D8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UCC3806DW OverviewAs a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). Voltages 8V~14.5V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a 0°C~70°C TA. Using this switching controller, it is possible to switch at 47kHz. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics will be returned if you search "UCC3806". Total pins of switching converter are 16. In particular, switching converter belongs to the Switching Regulator or Controllers family. The test statistics indicate that DC regulator outputs a voltage of 11.9V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controller operates at a frequency of 1MHz. 14.5V is the nominal working voltage. UCC3806DW FeaturesTransistor Driver Outputs Switching Frequency: 47kHz Current Limit, Enable, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 1MHz UCC3806DW ApplicationsThere are a lot of Texas Instruments UCC3806DW DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3842ADTR OverviewWith a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 10V~30V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. With this switching controller, you can switch at Up to 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 14 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "UC3842". There are 14 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 15V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. There is 450kHz frequency setting on the switching controller. A nominal working status is achieved when the input voltage is set to 25V. Switching controller is necessary to provide a voltage of 11V. You should not supply more current than 25mA to the controller. UC3842ADTR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 450kHz UC3842ADTR ApplicationsThere are a lot of Texas Instruments UC3842ADTR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3823ADW OverviewThe switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 8.4V~22V volts and has 8.4V~22V supply voltage. A 0°C~70°C TA dc switcher is not a problem. With this switching controller, you can switch at 400kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 16 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "UC3823". There are a total of 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 2V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set at CAN ALSO BE CONFIGURED IN CURRENT MODE in order to fulfill the requirements more effectively. You can set the input voltage to 22V for nominal working status. A supply voltage of 15V is required. UC3823ADW FeaturesTransistor Driver Outputs Switching Frequency: 400kHz~1MHz Current Limit, Frequency Control, Ramp, Soft Start PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 1MHz CAN ALSO BE CONFIGURED IN CURRENT MODE UC3823ADW ApplicationsThere are a lot of Texas Instruments UC3823ADW DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC2844AQDR OverviewThis switching controller fits most application requirements since it is packaged in a 14-SOIC (0.154, 3.90mm Width) package. It is sufficient to generate 1 outputs with this dc motor controller. There is a Cut Tape (CT) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 10V~30V. Suitable for working in an dc switcher that has a -40°C~125°C TA. There is a switch at Up to 500kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 14 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "UC2844". Total pins of switching converter are 14. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 15V. It should be noted that the dc to dc regulator only accepts 25V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controllers work at 450kHz Hz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 30V. When the dc switching is dormant, it uses 11mA. Voltage 11V must be supplied. In order to ensure proper operation, the controller should not receive more current than 25mA. UC2844AQDR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 450kHz UC2844AQDR ApplicationsThere are a lot of Texas Instruments UC2844AQDR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TL3843BDR-8 OverviewCapsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 7.6V~30V. Qualified to work in a 0°C~70°C TA dc switcher. A switching controller such as this can switch at a value of Up to 500kHz . dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Search for "TL3843" to find other relevant dc to dc converter ics. 8 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 30V voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. There is 500kHz frequency setting on the switching controller. A nominal working status is achieved when the input voltage is set to 5.5V. This voltage controller requires a supply voltage of 15V. In order to ensure proper operation, the controller should not receive more current than 30mA. TL3843BDR-8 FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 500kHz TL3843BDR-8 ApplicationsThere are a lot of Texas Instruments TL3843BDR-8 DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3842AD8TR OverviewWith a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. A 10V~30V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with 0°C~70°C TA. It can switch at Up to 500kHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. 8 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. UC3842 can be searched for other relevant dc to dc converter ics. 8 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 15V voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers work at 450kHz Hz. It is possible to set the input voltage to 25V for nominal working status. The supply voltage must be 11V. In order to ensure proper operation, the controller should not receive more current than 25mA. UC3842AD8TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 450kHz UC3842AD8TR ApplicationsThere are a lot of Texas Instruments UC3842AD8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TL494CNSR OverviewWith its 16-SOIC (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. There is a Cut Tape (CT) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. A 7V~40V voltage is supplied to the dc control and used for operating it. Suitable for a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 1kHz~300kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "TL494". 16 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7V. Based on the test statistics, DC regulator outputs voltage 40V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. Switching controller operates at 300kHz Hz. When the dc switching is dormant, it uses 7.5mA. Switching controller is necessary to provide a voltage of 15V. Components may be damaged if their current is greater than 3.5mA. TL494CNSR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz TL494CNSR ApplicationsThere are a lot of Texas Instruments TL494CNSR DC to DC converter applications.
|
8422
In-stock
|
Get Quote | |||
Ultralife | TL594IDR OverviewThis switching controller fits most application requirements since it is packaged in a 16-SOIC (0.154, 3.90mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 7V~40V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Using this switching controller, it is possible to switch at 1kHz~300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. TL594 can be searched for other relevant dc to dc converter ics. 16 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7V. Test statistics indicate DC regulator outputs 40V voltage. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. A frequency of 300kHz is set for the switching controller. There must be a voltage supply of 15V volts. TL594IDR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz TL594IDR ApplicationsThere are a lot of Texas Instruments TL594IDR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3845D8TR OverviewWith a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 12V~28V and has a 12V~28V supply voltage. Worked in a 0°C~70°C TA dc switcher before. This switching controller can switch at 500kHz. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UC3845". Total pins of switching converter are 8. The type is a particular Switching Regulator or Controllers of switching converter. Based on the test statistics, DC regulator outputs voltage 13.5V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. The switching controller works at a frequency of 450kHz. Input voltage can be set to 25V for nominal working status. There should be 25mA current exceeding 25mA supplied to the controller. UC3845D8TR FeaturesTransistor Driver Outputs Switching Frequency: 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 450kHz UC3845D8TR ApplicationsThere are a lot of Texas Instruments UC3845D8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC2845AD8TR OverviewThe switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 7.6V~30V voltage are supplied and operated. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 500kHz position. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "UC2845". In total, switching converter has 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Based on the test statistics, DC regulator outputs voltage 15V. If you start a project, note down the dc dc regulator's usual output current of 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. A frequency of 450kHz is set for the switching controller. You can set the input voltage to 25V for nominal working status. Voltage 11V is required for supply. Current supplied to the controller should not exceed 25mA. UC2845AD8TR FeaturesTransistor Driver Outputs Switching Frequency: 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 450kHz UC2845AD8TR ApplicationsThere are a lot of Texas Instruments UC2845AD8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC2844AD8TR OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. 10V~30V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at Up to 500kHz. The Surface Mount value makes it suitable for general dc dc regulator. Frequency Control provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. In addition to "UC2844", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 15V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. 450kHz is the frequency of the switching controller. For nominal working status, the input voltage can be set as 25V. The supply voltage should be 11V. 25mA more than 25mA current should be supplied to the controller. UC2844AD8TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 450kHz UC2844AD8TR ApplicationsThere are a lot of Texas Instruments UC2844AD8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC2843AD8TR OverviewWith a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.6V~30V. Suitable for work in a -40°C~85°C TA dc switcher. This switching controller can switch at Up to 500kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Frequency Control for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 8. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UC2843". In total, switching converter has 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 5V voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. A frequency of 500kHz is set for the switching controller. For nominal working status, the input voltage can be set as 25V. There is a requirement for a 11V supply voltage. Current supplied to the controller should not exceed 25mA. UC2843AD8TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 500kHz UC2843AD8TR ApplicationsThere are a lot of Texas Instruments UC2843AD8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SG3524N DescriptionOn a single chip, the SG2524 and SG3524 devices include all of the functionalities needed to build a regulating power supply, inverter, or switching regulator. They can also be utilized as a control element in applications with high power output. The SG2524 and SG3524 were created for fixed frequency, pulse-width modulation (PWM) polarity-converter applications, transformer-coupled dc to dc converters, transformerless voltage doublers, and polarity-converter applications. The complementary output can be used as a single-ended or push-pull signal. On-chip regulators, error amplifiers, programmable oscillators, pulse-steering flip-flops, two uncommitted pass transistors, a high-gain comparator, and current limiting and shutdown circuitry are all included in each device. SG3524N Features
SG3524N Applications
|
999
In-stock
|
Get Quote | |||
Ultralife | TPS40211DGQR OverviewThe switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~52V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 35kHz~1MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. The switching converters's terminals (s) are designed at DUAL. 10 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. A search for "TPS40211" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 10. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 250V. The dc dc regulator's usual output current is 400mA, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 95 %. Switching controllers work at 1MHz Hz. The dc switching utilizes 1.5mA when it is in a dormant state. The dc switcher's maximum input voltage is 52V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. Input current cannot exceed 6A with this dc switcher. Components may become damaged if their current exceeds 2.5mA. TPS40211DGQR FeaturesTransistor Driver Outputs Switching Frequency: 35kHz~1MHz Enable, Frequency Control, Soft Start PULSE WIDTH MODULATION Max Duty Cycle: 95 % Frequency: 1MHz TPS40211DGQR ApplicationsThere are a lot of Texas Instruments TPS40211DGQR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | UC3843AD8TR OverviewIt comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. Suitable for working in an dc switcher that has a 0°C~70°C TA. A switching controller such as this can switch at a value of Up to 500kHz . dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. UC3843 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter is a special type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 15V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. The switching controller works at a frequency of 500kHz. 25V is the nominal working voltage. A supply voltage of 11V is required. 25mA more than 25mA current should be supplied to the controller. UC3843AD8TR FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 500kHz UC3843AD8TR ApplicationsThere are a lot of Texas Instruments UC3843AD8TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TL5001CDR OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Cut Tape (CT) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. A 3.6V~40V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -20°C~85°C TA. It can switch at 20kHz~500kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Dead Time Control, Frequency Control is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 6V. Other relevant dc to dc converter ics can be found by searching "TL5001". Total pins of switching converter are 8. DC regulator outputs 50V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. A frequency of 500kHz is set for the switching controller. A dc switching in a dormant state uses 1.1mA. Since the dc switcher's maximum input voltage is 40V, the voltage must be regulated accordingly. There must be a 3.6V supply voltage. A dc switcher can only produce an output current of 3A. The datasheet indicates that the switching converter can output 50V volts at its maximum. A supply current of 1.1mA is used to power it. At least 1V voltage is output by the voltage controller. TL5001CDR FeaturesTransistor Driver Outputs Switching Frequency: 20kHz~500kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Frequency: 500kHz TL5001CDR ApplicationsThere are a lot of Texas Instruments TL5001CDR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | UC3845BN OverviewAs a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. A 7.6V~30V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~150°C TJ rating. There is a switch at 500kHz that can be used with this controller. The Through Hole value makes it suitable for general dc dc regulator. Frequency Control provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . An array of 8 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Searching "UC3845" will return other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sA frequency of 250kHz is used by the switching controller. You can set the input voltage to 15V for nominal working status. There are 1 phases in this controller. In the presence of a current greater than 17mA, the component may fail to operate properly and may be damaged. UC3845BN FeaturesTransistor Driver Outputs Switching Frequency: 500kHz Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 250kHz UC3845BN ApplicationsThere are a lot of STMicroelectronics UC3845BN DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LM25085AMY/NOPB OverviewWith a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~42V. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to Up to 1MHz. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 8 terminations. DC switcher's input voltageis 24V volts. LM25085 can be searched for other relevant dc to dc converter ics. 8 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. Statistically, DC regulator outputs 42V volts. You should note that the dc dc regulator's usual output current is 1.75A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator1MHz has the maximum frequency. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. DC switchings that are dormant use 1.25mA. This controller contains 1 phases. LM25085AMY/NOPB FeaturesTransistor Driver Outputs Switching Frequency: Up to 1MHz Current Limit, Frequency Control Max Duty Cycle: 100 % LM25085AMY/NOPB ApplicationsThere are a lot of Texas Instruments LM25085AMY/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | LM25085MYE/NOPB OverviewCapsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~42V voltage are supplied and operated. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 8 terminations. There is a DC switcher's nominal voltage of 24V. Search for "LM25085" to find other relevant dc to dc converter ics. The switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Based on the test statistics, DC regulator outputs voltage 42V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1.75A. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 1MHz is the frequency of the switching controller. As long as the dc switching is in a dormant state, it utilizes 1.25mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 42V. Voltage 4.5V is necessary for the supply. There will be 1.75A output current greater than 1.75A from the dc switcher. 1.25V voltage output is lower than 1.25V. LM25085MYE/NOPB FeaturesTransistor Driver Outputs Switching Frequency: Up to 1MHz Current Limit, Frequency Control Max Duty Cycle: 100 % Frequency: 1MHz LM25085MYE/NOPB ApplicationsThere are a lot of Texas Instruments LM25085MYE/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | <h3>TPS53219ARGTR Overview</h3><div><br/>Capsuled in the 16-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 4.5V~25V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. There is a switch at 500kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position QUAD . Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "TPS53219" to find other relevant dc to dc converter ics. In total, switching converter has 16 pins. Input voltage of dc dc voltage regulator must be 4.5V. According to the test statistics, DC regulator outputs 5.5V voltage. normally, the dc dc regulator's output current is 50mA, which you should keep in mind when starting a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator's maximum frequency is 1.07MHz. The value of DC to DC voltage regulator is set at ALSO OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V in order to fulfill the requirements more effectively. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 25V. It belongs to the dc to dc voltage regulator series D-CAP?, Eco-Mode?. A dc switching in a dormant state uses 400μA. <br/><br/></div><h3>TPS53219ARGTR Features</h3><div><br/>Transistor Driver Outputs<br/>Switching Frequency: 500kHz<br/>Enable, Frequency Control, Power Good, Soft Start<br/>PULSE WIDTH MODULATION<br/>ALSO OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V<br/><br/></div><h3>TPS53219ARGTR Applications</h3><div><br/>There are a lot of Texas Instruments TPS53219ARGTR DC to DC converter applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Fire elevators<!--<li--></li><li>Automatic testing equipment<!--<li--></li><li>Automatic plug-in machines<!--<li--></li><li>Communication system<!--<li--></li><li>Program control systems<!--<li--></li><li>Refrigerators of central air conditioners<!--<li--></li><li>Linear guide<!--<li--></li><li>Imported equipment <!--<li--></li><li>Post equipment <!--<li--></li><li>Precision electronic equipment<!--<li--></li></ul> |
12000
In-stock
|
Get Quote | |||
Ultralife | LM5085MYX/NOPB OverviewCapsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~75V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at Up to 1MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, On Time Control is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. A DC switcher's nominal voltage of 48V is input. A search for "LM5085" will reveal other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. Test statistics indicate DC regulator outputs 75V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 1MHz for this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 75V. DC switching uses 1.3mA when it is dormant. LM5085MYX/NOPB FeaturesTransistor Driver Outputs Switching Frequency: Up to 1MHz Current Limit, Enable, On Time Control Max Duty Cycle: 100 % LM5085MYX/NOPB ApplicationsThere are a lot of Texas Instruments LM5085MYX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TPS40200QDRQ1 OverviewWith a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~52V. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 35kHz~500kHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. A search for "TPS40200" will reveal other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Statistically, the DC regulator outputs 46.8V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 300mA. A frequency of 500kHz is set for the switching controller. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. During dormancy, the dc switching uses 1.5mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 52V due to the dc switcher's maximum input voltage. There must be a 4.5V supply voltage. There will be 300mA current output from the dc switcher above 300mA. Depending on the datasheet, the switching converter can output 46V volts at its peak. Its lowest voltage output is not less than 700mV. TPS40200QDRQ1 FeaturesTransistor Driver Outputs Switching Frequency: 35kHz~500kHz Frequency Control, Soft Start PULSE WIDTH MODULATION Frequency: 500kHz TPS40200QDRQ1 ApplicationsThere are a lot of Texas Instruments TPS40200QDRQ1 DC to DC converter applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.