Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | LMH0384SQ/NOPB OverviewIt fits well with the package [0].A case of Tape & Reel (TR)is provided.In this case, this component is installed in accordance with Surface Mount.The component applied in Digital Interfaceis appropriate.The device is capable of supplying 3.135V~3.465V volts.Based on the [0], it is possible to locate related parts.The terminations on it are [0].Make sure that this device is set to 3.3V.There are a total of 16 pins on the device.It is mounted on Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].When the value is set to [0], the part will run consistently.Electronic components of the Other Telecom ICsfamily are used.An interface IC operates at a supply voltage of 3.3V.LINE EQUALIZERis the type of IC used in the device. LMH0384SQ/NOPB FeaturesIt is based on LMH0384. Set the part at 3.3V volts Telecom IC Type : LINE EQUALIZER LMH0384SQ/NOPB ApplicationsThere are a lot of Texas Instruments LMH0384SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | PM8531B-F3EI OverviewThe Modulepackage fits the device well.A Traycase is provided with it.It is installed according to Surface Mount.This component applies to Fanout PCIe Switch.This electronic part is a member of Switchtec series. PM8531B-F3EI FeaturesPM8531B-F3EI ApplicationsThere are a lot of Microchip Technology PM8531B-F3EI Specialized Interface ICs applications.
|
9458
In-stock
|
Get Quote | |||
Microchip Technology |
58
In-stock
|
Get Quote | ||||
NXP Semiconductors | PCA9546APW,112 OverviewThe 16-TSSOP (0.173, 4.40mm Width)package would be a good match for it.It comes in a case with a [0].Surface Mountis used to install this component.In this case, it is appropriate for the component applied in Translating Switch.The ability to supply 2.3V~5.5V volts is available with certain devices.Using the PCA9546you can find related parts.In total, there are 16terminations.Keep in mind that this device should be set to 3.3V.In order to operate, the 16pins are used.A voltage of 85°Cpowers the potentiometer.Components are designed to operate at a minimum temperature of -40°C°C.With the use of this device, ALSO OPERATES AT 4.5V TO 5.5V SUPPLYcan also be established.It is necessary to operate on 4inputs.MULTIPLEXERlogic ICs are used in the chip. PCA9546APW,112 FeaturesIt is based on PCA9546. Set the part at 3.3V volts PCA9546APW,112 ApplicationsThere are a lot of NXP USA Inc. PCA9546APW,112 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0341SQE/NOPB OverviewThe 48-WFQFN Exposed Padpackage is a good fit for it.It comes in a case with a [0].The component has been installed according to the Surface Mountmethod.This component is suitable for the application in Video Equipment.It is capable of supplying a voltage of 2.5V 3.3V.The LMH0341can be used to locate related parts.The termination count on it is [0].Make sure this device is set to 2.5V.In total, it consists of 48pins.48 pins are used for operation.It is mounted by Surface Mount.A minimum working temperature of -40°Cis required to ensure the reliability of the device.Keeping 85°Cas the maximum value will ensure consistency.The interface IC conducts at a voltage of 3.3V.It is embedded with 5 drivers on the part. LMH0341SQE/NOPB FeaturesIt is based on LMH0341. Set the part at 2.5V volts with 5 Drivers LMH0341SQE/NOPB ApplicationsThere are a lot of Texas Instruments LMH0341SQE/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9543APW,118 OverviewThe 14-TSSOP (0.173, 4.40mm Width)package is a good fit for it.It comes in a case with a [0].In the way of [0], this component is installed.2-Channel I2C Multiplexeris appropriate for this component.The device is capable of supplying voltages of 2.3V~3.6V 4.5V~5.5V volts.Using the PCA9543can help you find related parts.In total, there are 14terminations.Operation is performed through the 14pins. PCA9543APW,118 FeaturesIt is based on PCA9543. PCA9543APW,118 ApplicationsThere are a lot of NXP USA Inc. PCA9543APW,118 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9540BDP,118 OverviewThis fits well into the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.This product comes in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.In this case, it is appropriate for the component applied in 2-Channel I2C Multiplexer.The device is capable of supplying voltages of 2.3V~5.5V volts.Using the PCA9540you can find related parts.In total, there are 8terminations.Make sure that this device is set to 3.3V.8 pins are used for operation.When the supply voltage is set to [0], the potentiometer conducts.It is designed to function at a minimum temperature of -40°C°C.This device is also capable of finding [0].The operation will be performed on 2inputs. PCA9540BDP,118 FeaturesIt is based on PCA9540. Set the part at 3.3V volts PCA9540BDP,118 ApplicationsThere are a lot of NXP USA Inc. PCA9540BDP,118 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPD12S016RKTR OverviewThis fits well into the 24-UFQFN package.It comes in a case with a [0].In the way of [0], this component is installed.The component applied in HDMI, I2C Buffer, ESD Protectionis appropriate.It is possible to obtain devices that supply 4.5V~5.5V volts.Using the TPD12S016can help you find related parts.It consists of 24terminations.It is important to remember that this device should be set to 3.3V.A total of 24pins are located on it.A device's operation is controlled by the 24pins.The mount is Surface Mount.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.In addition to ensuring the consistency of the part, 85°Cis the maximum value possible.The analog IC used by this device is [0].12channels are available on the device. TPD12S016RKTR FeaturesIt is based on TPD12S016. Set the part at 3.3V volts Other Analog IC Type : ANALOG CIRCUIT TPD12S016RKTR ApplicationsThere are a lot of Texas Instruments TPD12S016RKTR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH1219RTWT OverviewThe 24-WFQFN Exposed Padpackage fits the device well.This product comes in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.Cable Equalizationapplies the component appropriately.The LMH1219can be used to find related parts.This termination has 24terminations.There are a total of 24 pins on the device.It is mounted on Surface Mount.For optimum reliability, it operates at a temperature of [0].It is imperative that the maximum value of 85°Cis maintained in order to ensure continued operation.Maximum supply voltage is 2.5V. LMH1219RTWT FeaturesIt is based on LMH1219. LMH1219RTWT ApplicationsThere are a lot of Texas Instruments LMH1219RTWT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TIC10024QDCPRQ1 OverviewThe 38-TFSOP (0.173, 4.40mm Width) Exposed Padpackage is a good fit for this feature.The package contains a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.In this case, it is appropriate for the component applied in Automotive, Switch Monitoring.A device capable of providing 4.5V~35V volts is available.The TIC10024can be used to locate related parts.It consists of 38terminations.Keep in mind that this device should be set to 12V.In total, there are 38pins on the board.The potentiometer conducts in a supply voltage of 125°C.There are several electronic parts in the Automotive, AEC-Q100series, including this one.It is designed to function at a minimum temperature of -40°C°C.This device is equipped with an analog integrated circuit [0].It has a channel count of [0]. TIC10024QDCPRQ1 FeaturesIt is based on TIC10024. Set the part at 12V volts Other Analog IC Type : POWER SUPPLY SUPPORT CIRCUIT TIC10024QDCPRQ1 ApplicationsThere are a lot of Texas Instruments TIC10024QDCPRQ1 Specialized Interface ICs applications.
|
9533
In-stock
|
Get Quote | |||
Texas Instruments | ISO1211D OverviewIt fits well with the package [0].The item is packaged in a Tube case.In the way of [0], this component is installed.The component applied in PLC Digital Input Modulesis appropriate.The ability to supply 2.25V~5.5V volts is available with certain devices.On the basis of the [0], it is possible to find related parts.It consists of 8terminations.Keep in mind that this device should be set to 2.5V.The device has a total of 8pins.A minimum working temperature of -55°Cis required to ensure the reliability of the unit.It is imperative that the maximum value of 125°Cis maintained in order to ensure continued operation.In this device, ANALOG CIRCUITis the analog IC.In this device, there are 1channels. ISO1211D FeaturesIt is based on ISO1211. Set the part at 2.5V volts Other Analog IC Type : ANALOG CIRCUIT ISO1211D ApplicationsThere are a lot of Texas Instruments ISO1211D Specialized Interface ICs applications.
|
2500
In-stock
|
Get Quote | |||
Texas Instruments | PCA9543APW OverviewThe 14-TSSOP (0.173, 4.40mm Width)package is a good fit for it.A Tubecase is provided with it.The component is installed according to Surface Mount.Translating Switchapplies the component appropriately.It is capable of supplying a voltage of 2.3V~5.5V.Using the CA9543can help you find related parts.The terminations on it are [0].Make sure this device is set to 3.6V.In total, it consists of 14pins.Operation is performed through the 14pins.A minimum working temperature of -40°Cis required to ensure the reliability of the device.The maximum value of 85°C assures that the part runs consistently.There are 2 channels available on the device.The part may be run at a maximum frequency of 400kHz. PCA9543APW FeaturesIt is based on CA9543. Set the part at 3.6V volts PCA9543APW ApplicationsThere are a lot of Texas Instruments PCA9543APW Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN75DP139RSBR OverviewIt's a good fit for the 40-WFQFN Exposed Pad package.A case of Tape & Reel (TR)is provided.Surface Mountis the way in which this component is installed.Desktop, Notebook PCsapplies it to the appropriate component.It is possible to find devices that supply 3V~3.6V volts.A 75DP139can be used to identify related parts.A total of 40terminations have been recorded.It contains a total of 40 pins.For operation, 40pins are used.The device must operate at a minimum working temperature of 0°Cin order to be reliable.In addition to ensuring the consistency of the part, 85°Cis the maximum value possible.In the interface IC, the supply voltage is set to 3.3V.There are 1 channels available on the device.CONSUMER CIRCUIT may be used to sort the part based on the type of consumer IC. SN75DP139RSBR FeaturesIt is based on 75DP139. SN75DP139RSBR ApplicationsThere are a lot of Texas Instruments SN75DP139RSBR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | USB4640-HZH-03 OverviewIt is appropriate for the device to use the 48-VFQFN Exposed Padpackage.It comes in a Tray case.Surface Mountis the way in which this component is installed.Cell Phones, GPS, PCs, Printers, Set-Top Boxesapplies to this component.The ability to supply 1.8V volts is available with certain devices.Based on the [0], it is possible to locate related parts.The number of terminations is 48.Keep in mind that this device should be set to 3.3V.In total, there are 48pins on the board.The mount is Surface Mount.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.Electronic components in this system belong to the Bus Controllers family.The interface IC conducts at a voltage of 3.3V.In this device, there is MICROPROCESSOR CIRCUIT uPs/uCs/peripheral IC.In total, there are 3ports on the device. USB4640-HZH-03 FeaturesIt is based on USB4640. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type USB4640-HZH-03 ApplicationsThere are a lot of Microchip Technology USB4640-HZH-03 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS25810RVCT OverviewIt's a good fit for the 20-WFQFN Exposed Pad package.The item is packaged in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.USBapplies it to the appropriate component.A device capable of providing 4.5V~6.5V volts is available.A TPS25810can be used to identify related parts.This termination has 20terminations.It is important to remember that this device should be set to 3.3V.The device has a total of 20pins.It is mounted by Surface Mount.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.Keeping 125°Cas the maximum value will ensure consistency.There are a total of 1 ports on the device.Interface ICs for this part are categorized as INTERFACE CIRCUIT. TPS25810RVCT FeaturesIt is based on TPS25810. Set the part at 3.3V volts Interface IC Type : INTERFACE CIRCUIT TPS25810RVCT ApplicationsThere are a lot of Texas Instruments TPS25810RVCT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TUSB212QRWBTQ1 OverviewIt fits well with the package [0].The item is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.The component applied in Signal Processingis appropriate.It is possible to find devices that supply 3V~3.6V volts.Using the TUSB212can help you find related parts.The terminations on it are [0].It is important to remember that this device should be set to 3.3V.There are a total of 12 pins on it.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.When 105°Cis the maximum value, the part will run consistently.The electronic part in question belongs to the Automotive, AEC-Q100 series.It has a total of 1channels.IC type TELECOM CIRCUITis used in the device. TUSB212QRWBTQ1 FeaturesIt is based on TUSB212. Set the part at 3.3V volts Telecom IC Type : TELECOM CIRCUIT TUSB212QRWBTQ1 ApplicationsThere are a lot of Texas Instruments TUSB212QRWBTQ1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DP83822HFRHBT Overview32-VFQFN Exposed Padis an appropriate package for this device.A Tape & Reel (TR)case is provided with it.Surface Mountis the way in which this component is installed.Ethernetapplies to this component.It is possible to find devices that supply 1.71V~3.45V volts.The DP83822can be used to locate related parts.It consists of 32terminations.It is important to keep in mind that this device should be set to 1.8V.There are a total of 32 pins on the device.In order to ensure reliability, the unit works at a minimum working temperature of [0].The maximum value of 125°C assures that the part runs consistently. DP83822HFRHBT FeaturesIt is based on DP83822. Set the part at 1.8V volts DP83822HFRHBT ApplicationsThere are a lot of Texas Instruments DP83822HFRHBT Specialized Interface ICs applications.
|
2500
In-stock
|
Get Quote | |||
Texas Instruments | DS90CR286MTD/NOPB OverviewThe 56-TFSOP (0.240, 6.10mm Width)package fits the device well.A case of Tubeis provided.There is no installation of this component in the way of Surface Mount.An output voltage of 3V~3.6V volts can be provided by the device.On the basis of the [0], it is possible to find related parts.It has 56terminations.Make sure that this device is set to 3.3V.In total, it consists of 56pins.Operation is performed through the 56pins.The mount is Surface Mount.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.This value enables the part to run consistently with a maximum value of [0].Electronic components in this system belong to the Line Driver or Receivers family.In the interface IC, the supply voltage is set to 3.3V.LINE RECEIVERis the type of interface IC for this part.On the part, there are 4 drivers embedded. DS90CR286MTD/NOPB FeaturesIt is based on DS90CR286. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER with 4 Drivers DS90CR286MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CR286MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS90CR287MTD OverviewThe 56-TFSOP (0.240, 6.10mm Width)package is a good fit for this feature.There is a Tubecase included with it.Surface Mountis the way in which this component is installed.A device capable of providing 3V~3.6V volts is available.The DS90CR287can be used to locate related parts.A total of 56terminations have been recorded.It is recommended that you set this device to 3.3V.56pins are on it in total.Operation is performed through the 56pins.By [0], it is mounted.The device must operate at a minimum working temperature of -10°Cin order to be reliable.When the value is set to [0], the part will run consistently.Electronic components in this system belong to the Line Driver or Receivers family.In the interface IC, the supply voltage is set to 3.3V.It has a total of 1channels.On the part, there are 4 drivers embedded. DS90CR287MTD FeaturesIt is based on DS90CR287. Set the part at 3.3V volts with 4 Drivers DS90CR287MTD ApplicationsThere are a lot of Texas Instruments DS90CR287MTD Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SCANSTA112VS/NOPB OverviewIt is appropriate for the device to use the 100-TQFPpackage.A Traycase is provided with it.There is no installation of this component in the way of Surface Mount.It is appropriate for the component applied in Testing Equipment.The ability to supply 3V~3.6V volts is available with certain devices.Based on the [0], it is possible to locate related parts.It consists of 100terminations.It is important to note that this device should be set to 3.3V.A total of 100pins are located on it.In order for the operation to be performed, the 100pins must be connected.The mount is Surface Mount.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.When the value is set to [0], the part will run consistently.Electronic components are of the Other Microprocessor ICsfamily.The uPs/uCs/Peripheral IC this device incoporates is MICROPROCESSOR CIRCUIT.At [0], it is capable of delivering voltage. SCANSTA112VS/NOPB FeaturesIt is based on SCANSTA112. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type SCANSTA112VS/NOPB ApplicationsThere are a lot of Texas Instruments SCANSTA112VS/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9542APW,112 OverviewIt is appropriate for the device to use the 14-TSSOP (0.173, 4.40mm Width)package.The item is packaged in a Tube case.In this case, this component is installed in accordance with Surface Mount.It is appropriate for the component applied in 2-Channel I2C Multiplexer.Devices that are capable of supplying 2.3V~5.5Vvolts may be used.A PCA9542can be used to identify related parts.A device's operation is controlled by the 14pins. PCA9542APW,112 FeaturesIt is based on PCA9542. PCA9542APW,112 ApplicationsThere are a lot of NXP USA Inc. PCA9542APW,112 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SEC1210-CN-02NC OverviewIt's a good fit for the 24-VFQFN Exposed Pad package.The package contains a Tray case.The component is installed in the way indicated by Surface Mount.Smart Cardapplies to this component.The device is capable of supplying 3V~5.5V volts.Using the SEC1210can help you find related parts.The terminations on it are [0].Make sure this device is set to 5V.Operation is performed via the 24pins.The mount is Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.This value enables the part to run consistently with a maximum value of [0].This device supports BUS CONTROLLER, UNIVERSAL SERIAL BUSuPs/uCs/peripheral ICs. SEC1210-CN-02NC FeaturesIt is based on SEC1210. Set the part at 5V volts BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type SEC1210-CN-02NC ApplicationsThere are a lot of Microchip Technology SEC1210-CN-02NC Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0384SQE/NOPB OverviewThis fits well into the 16-WQFN Exposed Pad package.This product comes in a Tape & Reel (TR) case.It is installed according to Surface Mount.This is appropriate for the component that is applied in Digital InterfaceDevices that are capable of supplying 3.135V~3.465Vvolts may be used.Using the LMH0384you can find related parts.There are 16 terminations on it.This device should be set to 3.3V.16pins are on it in total.It is mounted on Surface Mount.The device must operate at a minimum working temperature of -40°Cin order to be reliable.In addition to ensuring the consistency of the part, 85°Cis the maximum value possible.This electronic component belongs to the family of [0].An interface IC operates at a supply voltage of 3.3V.The device uses the telecom IC type of LINE EQUALIZER. LMH0384SQE/NOPB FeaturesIt is based on LMH0384. Set the part at 3.3V volts Telecom IC Type : LINE EQUALIZER LMH0384SQE/NOPB ApplicationsThere are a lot of Texas Instruments LMH0384SQE/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TCA8418EYFPR OverviewThis fits well into the 25-XFBGA, DSBGA package.It comes in a case with a [0].The component has been installed according to the Surface Mountmethod.This is appropriate for the component that is applied in PDA's, Portable Audio/Video, SmartphonesIt is possible to obtain devices that supply 1.65V~3.6V volts.By using the [0], it is possible to find parts that are related.The termination count on it is [0].It contains a total of 25 pins.In order to operate, the 25pins are used.For optimum reliability, it operates at a temperature of [0].By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.ANALOG CIRCUIT is the analog IC that this device employs.It has 1channels.It is suitable to run the part at the max frequency of 1MHz.The device has 18I/Os programmed. TCA8418EYFPR FeaturesIt is based on TCA8418. Other Analog IC Type : ANALOG CIRCUIT TCA8418EYFPR ApplicationsThere are a lot of Texas Instruments TCA8418EYFPR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | XIO2001PNP Overview128-TQFP Exposed Padis an appropriate package for this device.The item is packaged in a Tray case.In this case, this component is installed in accordance with Surface Mount.This component is suitable for the application in PCI Express to PCI Translation Bridge.It is possible to find devices that supply 1.35V~1.65V 3V~3.6V volts.The IO2001can be used to find related parts.The terminations on it are [0].It is important to note that this device should be set to 1.5V.128pins are on it in total.Operation is carried out using the 128pins.Surface Mountmounts it.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.Electronic components from the family Bus Controllersare used.The interface IC conducts at a voltage of 1.5V.These devices are incorporated with uPs/uCs/Peripheral ICs of type BUS CONTROLLER, PCI.Voltage can be delivered at 1.53.3V.With this device, you can also find [0].A maximum frequency of 66MHzis appropriate for the part. XIO2001PNP FeaturesIt is based on IO2001. Set the part at 1.5V volts BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type XIO2001PNP ApplicationsThere are a lot of Texas Instruments XIO2001PNP Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | FDC37C669-MS OverviewThe 100-BQFPpackage is a good fit for this feature.It comes in a case with a [0].In the way of [0], this component is installed.It is possible to obtain devices that supply 4.5V~5.5V volts.Using the FDC37C669you can find related parts.The terminations on it are [0].Make sure this device is set to 5V.There are a total of 100 pins on it.By [0], it is mounted.A minimum working temperature of 0°Cis required to ensure the reliability of the unit.Keeping 70°Cas the maximum value will ensure consistency.In this case, the electronic components are from the Secondary Storage Controllers family.It is capable of delivering voltage at 5V.A total of 13I/Os are programmed into the device. FDC37C669-MS FeaturesIt is based on FDC37C669. Set the part at 5V volts FDC37C669-MS ApplicationsThere are a lot of Microchip Technology FDC37C669-MS Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS90CF388VJD/NOPB OverviewThe 100-TQFPpackage is a good fit for this feature.This product comes in a Tray case.The component has been installed according to the Surface Mountmethod.An output voltage of 3V~3.6V volts can be provided by the device.Based on the [0], related parts can be found.This termination has 100terminations.You should set this device to 3.3V.In total, it consists of 100pins.100 pins are used for operation.The unit is mounted on Surface Mount.The device must operate at a minimum working temperature of -10°Cin order to be reliable.This value enables the part to run consistently with a maximum value of [0].There are electronic components in the Line Driver or Receivers family.Interface ICs operate at a voltage level of 3.3V volts.On the part, there are 48 drivers embedded. DS90CF388VJD/NOPB FeaturesIt is based on DS90CF388. Set the part at 3.3V volts with 48 Drivers DS90CF388VJD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF388VJD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MGC3030-I/SS OverviewThis fits nicely with the 28-SSOP (0.209, 5.30mm Width) package.It comes in a Tube case.There is no installation of this component in the way of Surface Mount.This component applies to Controller.A device capable of providing 3.3V volts is available.The MGC3030can be used to locate related parts.It has 28terminations.Make sure that this device is set to 3.3V.In total, it contains 28pins.Surface Mountmounts it.It is designed to work at a minimum working temperature of -40°C to ensure reliability.In addition to ensuring the consistency of the part, 85°Cis the maximum value possible.This device is equipped with a telecom IC type of TELECOM CIRCUIT. MGC3030-I/SS FeaturesIt is based on MGC3030. Set the part at 3.3V volts Telecom IC Type : TELECOM CIRCUIT MGC3030-I/SS ApplicationsThere are a lot of Microchip Technology MGC3030-I/SS Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS90CF384MTD/NOPB OverviewThe 56-TFSOP (0.240, 6.10mm Width)package is a good fit for it.It is packaged in a Tube case.The component has been installed according to the Surface Mountmethod.The device is capable of supplying voltages of 3V~3.6V volts.The DS90CF384can be used to find related parts.There are 56 terminations on it.Keep in mind that this device should be set to 3.3V.In total, it consists of 56pins.For operation, 56pins are used.In this case, it is mounted by Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.When the value is set to [0], the part will run consistently.ICs used in interfaces are operated at a supply voltage of 3.3V.It is embedded with 28 drivers on the part. DS90CF384MTD/NOPB FeaturesIt is based on DS90CF384. Set the part at 3.3V volts with 28 Drivers DS90CF384MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF384MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | PCI2250PCMG4 OverviewIt is appropriate for the device to use the 160-BQFPpackage.The item is packaged in a Tray case.This component is installed in the way of Surface Mount.In this case, it is appropriate for the component applied in PCI-to-PCI Bridge.It is possible to find devices that supply 3V~3.6V volts.It is possible to find related parts based on the PCI2250.This termination has 160terminations.Keep in mind that this device should be set to 3.3V.In total, it consists of 160pins.160 pins are used for operation.This is mounted by Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.This electronic component belongs to the family of [0].Voltage at 3.3/5Vcan be delivered by the device.It is capable of achieving good efficiency when functioning at a frequency of 33MHz. PCI2250PCMG4 FeaturesIt is based on PCI2250. Set the part at 3.3V volts Run frequency at 33MHz PCI2250PCMG4 ApplicationsThere are a lot of Texas Instruments PCI2250PCMG4 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.