Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
STMicroelectronics | M74HC393B1R OverviewA 14-DIP (0.300, 7.62mm)package is used for this device. There are 14 terminations used for its configuration. This device is fully flexible due to the supply voltage of [0]. A wire connects the 2elements. A total of 14pins are available on all components. There is a package in the form of Tube. Circuit components are connected with 14pins. Through Holeis the way in which it is mounted. It emerges as a member of HC/UH family. The 74HCseries is well suited to a number of uses. Binary Counteris used as the logic type. It is recommended to set the operating temperature to -55°C~125°C. There is a mounting type of Through Holeon this device. Providing a voltage of 2V~6Vensures higher reliability of operation. The array has 4elements. Pbfree code may result in yes. More related parts are available under its base part number M74HC393. To operate, it requires a supply voltage of 5V volts. Supply voltages can be as low as 2V volts (Vsup). 79MHzis the frequency of operation. Up to 6Vis the maximum supply voltage (Vsup). A total of 1outputs have been received by the system. M74HC393B1R FeaturesEmbedded in the 14-DIP (0.300, 7.62mm) package 4 bits per element Operating supply voltage of 5V Frequency of 79MHz M74HC393B1R ApplicationsThere are a lot of STMicroelectronics M74HC393B1R Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | HCF4060M013TR OverviewThis device is packaged in a 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. In total, there are 16pins on the component. It is packaged in a manner consistent with Tape & Reel (TR). Circuit components are connected by 16pins. It is mounted in the way of [0]. As a member of the 4000series, it is ideal for a wide range of applications. The logic type of Binary Counter is adopted. -55°C~125°Cshould be set as the operating temperature. A mounting type of Surface Mountis adopted. In the presence of the supply voltage of [0], it can operate more reliably. The array consists of elements storing 14bits each. Its base part number, [0], contains more related parts. For its packaging, TAPE AND REELis employed. The minimum supply voltage (Vsup) is 3V. There is 24MHz frequency associated with it. The maximum supply voltage (Vsup) is up to 20V. There are 1 input lines for the input of binary data in the form of on/off signals. The device has a total of 10 output lines. HCF4060M013TR FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 14 bits per element Frequency of 24MHz HCF4060M013TR ApplicationsThere are a lot of STMicroelectronics HCF4060M013TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | HCF4024M013TR OverviewThe device is packaged in the 14-SOIC (0.154, 3.90mm Width)type. It is configured using 14terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. A total of 14pins are available on all components. As a result, it is packaged in the way of a Tape & Reel (TR). A circuit is connected to other components by 14pins. Using [0], it can be mounted. As a member of the 4000series, it is ideal for a wide range of applications. The logic type of Binary Counter is adopted. A temperature of -55°C~125°Cshould be set for the operating environment. Using a Surface Mountmounting type, it is mounted. In the presence of the supply voltage of [0], it can operate more reliably. The array contains elements containing 7bits each. Pbfree code may result in yes. More related parts are available under its base part number HCF4024. TAPE AND REEL is employed for its packing. In the case of the supply voltage (Vsup), it can be as low as 3V. Up to a maximum voltage of 20Vcan be supplied (Vsup). The 1input lines are used to input binary data as on/off signals. HCF4024M013TR FeaturesEmbedded in the 14-SOIC (0.154, 3.90mm Width) package 7 bits per element HCF4024M013TR ApplicationsThere are a lot of STMicroelectronics HCF4024M013TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics |
5310
In-stock
|
Get Quote | ||||
Microchip Technology | SY100EL32VZC-TR OverviewThis device is supplied in the 8-SOIC (0.154, 3.90mm Width) package. In this diagram, there are 1elements that are interconnected by wires. Tape & Reel (TR)is used to package it. With its 100ELseries designation, it can be used for a range of applications. It is assumed that the logic type is [0]. -40°C~85°Cis the recommended operating temperature. There is a mounting type of Surface Mounton this device. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 1 bits. Further related parts may be found under the base part number 100EL32. SY100EL32VZC-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY100EL32VZC-TR ApplicationsThere are a lot of Microchip Technology SY100EL32VZC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY100EL33ZC-TR OverviewIn the 8-SOIC (0.154, 3.90mm Width)package, it is supplied. In wires, 1elements are connected. Tape & Reel (TR)is the packaging method used for this package. Having been designed as a member of the 100ELseries, it is well suited for use in a wide range of applications. Divide-by-4is selected as the logic type. It is recommended that the operating temperature be set to -40°C~85°C. This device is mounted in the Surface Mountposition. In the case of a supply voltage of [0], it operates more reliably. It contains 1elements. Among its base part number [0], you will find additional parts that are related. SY100EL33ZC-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY100EL33ZC-TR ApplicationsThere are a lot of Microchip Technology SY100EL33ZC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY100EP33VKI OverviewThis is a device supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. A wire connects the 1elements. In this case, it is packaged as Bulk. Due to its membership in the 100EPseries, it is suitable for a variety of applications. The logic type of Divide-by-4 is adopted. -40°C~85°Cshould be set as the operating temperature. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array consists of elements storing 1bits each. Further related parts can be found under its base part number 100EP33. SY100EP33VKI FeaturesEmbedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 1 bits per element SY100EP33VKI ApplicationsThere are a lot of Microchip Technology SY100EP33VKI Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10E016JC-TR OverviewIn the 28-LCC (J-Lead)package, it is supplied. There are 1 terminations on the device. There is a package in the form of Tape & Reel (TR). Having been designed as a member of the 10Eseries, it is well suited to a variety of applications. It is decided to use the logic type [0]. -40°C~85°Cshould be set as the operating temperature. The mounting type is Surface Mount. As a result, the device operates more reliably when a supply voltage of 4.2V~5.5Vis applied. An array consists of 8bits for each element. Under its base part number of [0], you will find additional related parts. SY10E016JC-TR FeaturesEmbedded in the 28-LCC (J-Lead) package 8 bits per element SY10E016JC-TR ApplicationsThere are a lot of Microchip Technology SY10E016JC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10E136JC-TR Overview28-LCC (J-Lead)is a package in which this device is packaged. 1 elements are interconnected in wires. Packaging is based on Tape & Reel (TR). Due to the fact that it is a member of the 10Eseries, it has a wide range of applications. It is decided to use the logic type [0]. A temperature of 0°C~85°Cshould be set for the operating environment. This device is mounted in a Surface Mountmanner. In the case of a supply voltage of [0], it operates more reliably. Each element in the array stores 6 bits. Further related parts may be found under the base part number 10E136. SY10E136JC-TR FeaturesEmbedded in the 28-LCC (J-Lead) package 6 bits per element SY10E136JC-TR ApplicationsThere are a lot of Microchip Technology SY10E136JC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL32VZI OverviewThis device is supplied in the 8-SOIC (0.154, 3.90mm Width) package. In wires, 1elements are connected. Packaging is based on Bulk. With its 10ELseries designation, it can be used for a range of applications. In this case, the logic type is set to [0]. The operating temperature should be set at -40°C~85°C. There is a mounting type of Surface Mounton this device. When the supply voltage is set to [0], it is able to operate with greater reliability. Each element in the array stores 1 bits. Further related parts can be found under its base part number 10EL32. SY10EL32VZI FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL32VZI ApplicationsThere are a lot of Microchip Technology SY10EL32VZI Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL32VZC Overview8-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. 1 elements are interconnected in wires. Bulkis the packaging method used for this package. As a member of 10EL series, it is well suited for various applications. It is assumed that the logic type is [0]. It is recommended to set the operating temperature to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. It is able to operate with higher reliability when the supply voltage of 3.3V~5V is provided. The array contains elements containing 1bits each. You can find more related parts under its base part number of 10EL32. SY10EL32VZC FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL32VZC ApplicationsThere are a lot of Microchip Technology SY10EL32VZC Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL33LZC-TR OverviewThis is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. There are 1 terminations on the device. There is a package in the form of Tape & Reel (TR). With its 10ELseries designation, it can be used for a range of applications. It is decided to use the logic type [0]. -40°C~85°Cshould be set as the operating temperature. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 1bits for each element. Among its base part number [0], you will find additional parts that are related. SY10EL33LZC-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL33LZC-TR ApplicationsThere are a lot of Microchip Technology SY10EL33LZC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10E016JY-TR OverviewThis device is supplied in the 28-LCC (J-Lead) package. In this diagram, there are 1elements that are interconnected by wires. It is packaged in a manner consistent with Tape & Reel (TR). In the circuit, 28pins are used to connect other components. The Surface Mountway is used to mount it. As a member of 10E series, it is well suited for various applications. Binary Counteris used as the logic type. It is recommended to set the operating temperature to -40°C~85°C. A mounting type of Surface Mountis adopted. Providing a voltage of 4.2V~5.5Vensures higher reliability of operation. The array contains elements containing 8bits each. The device contains information consisting of 8bits. The base part number of 10E016provides access to more related parts. The device operates at 85°Cfor extended periods with acceptable stability of electrical characteristics. This device is designed to operate within a specified temperature range with a lower limit generally set at -40°C. SY10E016JY-TR FeaturesEmbedded in the 28-LCC (J-Lead) package 8 bits per element SY10E016JY-TR ApplicationsThere are a lot of Microchip Technology SY10E016JY-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY100EL33ZG Overview8-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. The 1elements are connected by wires. As a result, it is packaged as Tube. In the circuit, there are 8pins that connect other components. To mount it, use the method of [0]. The 100ELseries offers a wide range of applications due to its versatility. Divide-by-4is selected as the logic type. It is recommended to set the operating temperature to -40°C~85°C. A mounting type of Surface Mountis adopted. In the case of a supply voltage of [0], it operates more reliably. It contains 1elements. More related parts are available under its base part number 100EL33. Electrical characteristics are stable at temperature 85°Cfor extended periods of time. An operating temperature range is specified with a lower limit generally set at -40°C degrees Celsius. -5.5Vis the maximum voltage that the device can handle. A minimum voltage of -4.2Vis available for the device. According to the system, there have been 2outputs sent. SY100EL33ZG FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY100EL33ZG ApplicationsThere are a lot of Microchip Technology SY100EL33ZG Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL33ZG-TR OverviewIt is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. There are 1 terminations on the device. As [0], it is packaged. As a member of 10EL series, it is well suited for various applications. It is decided to use the logic type [0]. The operating temperature should be set at -40°C~85°C. Using a Surface Mountmounting type, it is mounted. When the supply voltage is set to [0], it is able to operate with greater reliability. The array contains elements that store 1bits each. Among its base part number [0], you will find additional parts that are related. SY10EL33ZG-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL33ZG-TR ApplicationsThere are a lot of Microchip Technology SY10EL33ZG-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EP33VZI-TR OverviewIt is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. In wires, 1elements are connected. It is packaged in a manner consistent with Tape & Reel (TR). Due to its membership in the 10EPseries, it is suitable for a variety of applications. Logic type Divide-by-4 is adopted. The operating temperature should be set at -40°C~85°C. Using a Surface Mountmounting type, it is mounted. Providing a voltage of 3.3V~5Vensures higher reliability of operation. There are 1 bits stored in each element of the array. The base part number of 10EP33provides access to more related parts. SY10EP33VZI-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EP33VZI-TR ApplicationsThere are a lot of Microchip Technology SY10EP33VZI-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EP32VKI OverviewIn the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)package, it is supplied. The device contains 1terminations. It is packaged in a manner consistent with Bulk. As a member of the 10EPseries, it is ideal for a wide range of applications. The logic type of Divide-by-2 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. There is a mounting type of Surface Mounton this device. Providing a voltage of 3V~5.5Vensures higher reliability of operation. There are 1bits stored in each element of the array. It should be noted that there are more related parts under the 10EP32base part number. SY10EP32VKI FeaturesEmbedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 1 bits per element SY10EP32VKI ApplicationsThere are a lot of Microchip Technology SY10EP32VKI Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | 74ACT161MTR OverviewThis device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. There are wires connecting 1elements. All component pins are equal to 16. It is packaged in the way of Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. The way of Surface Mount is used to mount it. In this case, it emerges as a member of the ACT family. The 74ACTseries offers a wide range of applications due to its versatility. It is decided to use the logic type [0]. -55°C~125°Cshould be the operating temperature. Using a Surface Mountmounting type, it is mounted. It is able to operate with higher reliability when the supply voltage of 4.5V~5.5V is provided. The are 4 bits information in the device. It should be noted that there are more related parts under the 74ACT161base part number. TAPE AND REEL is employed for its packing. From the voltage source, there is 5Vvoltage. Up to a maximum voltage of 5.5Vcan be supplied (Vsup). 4input lines are used to input binary data as on/off signals. 74ACT161MTR FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 74ACT161MTR ApplicationsThere are a lot of STMicroelectronics 74ACT161MTR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EP33VKI OverviewA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)package is used for this device. The device contains 1terminations. In this case, it is packaged as Bulk. With its 10EPseries designation, it can be used for a range of applications. It is assumed that the logic type is [0]. The operating temperature should be set at -40°C~85°C. Having a mounting type of [0], it is suitable for installation. In the presence of the supply voltage of [0], it can operate more reliably. The array has 1elements. There are more related parts under the 10EP33base part number. SY10EP33VKI FeaturesEmbedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 1 bits per element SY10EP33VKI ApplicationsThere are a lot of Microchip Technology SY10EP33VKI Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EP32VZI OverviewThis device is packaged in a 8-SOIC (0.154, 3.90mm Width) package. In wires, 1elements are connected. As a result, it is packaged as Bulk. Due to the fact that it is a member of the 10EPseries, it has a wide range of applications. Divide-by-2is used as the logic type. -40°C~85°Cis the recommended operating temperature. It adopts a mounting type of Surface Mount. In the presence of the supply voltage of [0], it can operate more reliably. The array contains elements containing 1bits each. Its base part number, [0], contains more related parts. SY10EP32VZI FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EP32VZI ApplicationsThere are a lot of Microchip Technology SY10EP32VZI Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL33ZC OverviewThis device is supplied in the 8-SOIC (0.154, 3.90mm Width) package. A wire connects the 1elements. Bulkis used to package it. Due to its membership in the 10ELseries, it is suitable for a variety of applications. It is adopted that the logic type is [0]. A temperature of -40°C~85°Cshould be set for the operating environment. In this case, it is mounted with a Surface Mounttype. When a supply voltage of 3.3V~5Vis provided, it can operate with greater reliability. Each element in the array stores 1 bits. It should be noted that there are more related parts under the 10EL33base part number. SY10EL33ZC FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL33ZC ApplicationsThere are a lot of Microchip Technology SY10EL33ZC Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10EL32VZC-TR OverviewIt is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. The 1elements are connected by wires. It is packaged in the way of Tape & Reel (TR). As a member of 10EL series, it is well suited for various applications. The logic type of Divide-by-2 is adopted. In this case, the operating temperature should be set to -40°C~85°C. The mounting type is Surface Mount. When a supply voltage of 3.3V~5Vis provided, it can operate with greater reliability. The array stores 1bits in each element. Among its base part number [0], you will find additional parts that are related. SY10EL32VZC-TR FeaturesEmbedded in the 8-SOIC (0.154, 3.90mm Width) package 1 bits per element SY10EL32VZC-TR ApplicationsThere are a lot of Microchip Technology SY10EL32VZC-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY10E016JY OverviewThis device is supplied in the 28-LCC (J-Lead) package. The device has 1terminations. Packaging is based on Tube. There are 28 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. The 10Eseries offers a wide range of applications due to its versatility. Binary Counteris adopted as the logic type. It is recommended that the operating temperature be set to -40°C~85°C. Mounting type Surface Mountis used. When the supply voltage is set to [0], it is able to operate with greater reliability. Each element in the array stores 8 bits. As far as the device is concerned, there are 8bits of information. More related parts are available under its base part number 10E016. In order for it to operate, it requires a supply voltage of -5.5V . This device operates at 85°C°C for extended periods of time with acceptable electrical stability. It operates over a specified temperature range with a lower limit generally set to -40°C. SY10E016JY FeaturesEmbedded in the 28-LCC (J-Lead) package 8 bits per element Operating supply voltage of -5.5V SY10E016JY ApplicationsThere are a lot of Microchip Technology SY10E016JY Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology |
999
In-stock
|
Get Quote | ||||
Microchip Technology | SY10EP33VKI-TR Overview8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. In wires, 1elements are connected. Tape & Reel (TR)is the packaging method used for this package. Having been designed as a member of the 10EPseries, it is well suited to a variety of applications. Divide-by-4is selected as the logic type. -40°C~85°Cis the recommended operating temperature. Using a Surface Mountmounting type, it is mounted. In the presence of the supply voltage of [0], it can operate more reliably. It contains 1elements. Under its base part number of [0], you will find additional related parts. SY10EP33VKI-TR FeaturesEmbedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 1 bits per element SY10EP33VKI-TR ApplicationsThere are a lot of Microchip Technology SY10EP33VKI-TR Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC390MT OverviewThis device is packaged in a 16-SOIC (0.154, 3.90mm Width) package. It is configured using 16terminations. Having a voltage supply of 4.5Vallows it to operate in a highly flexible manner. There are 2 terminations on the device. 16is the number of pins on all components. Tape & Reel (TR)is the packaging method used for this package. To connect the circuit's other components, there are 16pins. Surface Mountis the way in which it is mounted. It is a member of the family [0]. As a member of the 74HCseries, it is ideal for a wide range of applications. It is adopted that the logic type is [0]. It is recommended to set the operating temperature to -55°C~125°C. It adopts a mounting type of Surface Mount. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. There are 4 bits stored in each element of the array. Based on the Pbfree code, the result may be yes. You can find more related parts under its base part number of 74HC390. In order to package it, TAPE AND REELis employed. There is a minimum supply voltage (Vsup) of 2V volts. It operates with the frequency of 35MHz. Typically, the supply voltage (Vsup) is limited to 6V. It consumes quiescent current at 8μA. CD74HC390MT FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 4 bits per element Frequency of 35MHz CD74HC390MT ApplicationsThere are a lot of Texas Instruments CD74HC390MT Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC4017QM96Q1 OverviewA device of this type is supplied in a package of type [0]. This configuration uses 16terminations. By supplying 4.5Vwith a voltage of 4.5V , the device can be operated in a completely flexible manner. The device has 1terminations. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). In the circuit, 16pins are used to connect other components. It is mounted in the direction of [0]. It is included in the HC/UHfamily. Having been designed as a member of the Automotive, AEC-Q100, 74HCseries, it is well suited for use in a wide range of applications. Logic type Counter, Decade is adopted. It is recommended to set the operating temperature to -40°C~125°C. This device is mounted in a Surface Mountmanner. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. It contains 10elements. It is possible for the result to be noin Pbfree code. Further related parts can be found under its base part number 74HC4017. For its packaging, TAPE AND REELis employed. In order to operate, it requires a voltage of [0]. There is a minimum supply voltage (Vsup) of 2V volts. The frequency of the device is 60MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup). CD74HC4017QM96Q1 FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 10 bits per element Operating supply voltage of 6V Frequency of 60MHz CD74HC4017QM96Q1 ApplicationsThere are a lot of Texas Instruments CD74HC4017QM96Q1 Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HCT161MT OverviewThis device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. Using 16terminations, it can be configured. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. There are 1 terminations on the device. There are 16pins on all components. As a result, it is packaged in the way of a Tape & Reel (TR). In the circuit, 16pins are used to connect other components. Surface Mountis the way in which it is mounted. It is a member of the family [0]. Having been designed as a member of the 74HCTseries, it is well suited for use in a wide range of applications. It is decided to use the logic type [0]. -55°C~125°Cshould be the operating temperature. In this case, it is mounted with a Surface Mounttype. By providing the supply voltage of [0], it is capable of operating more reliably. Each element in the array stores 4 bits. The result may be yesin terms of Pbfree code. These electronic devices have many important features, and TCO OUTPUTis one of them. The base part number of 74HCT161provides access to more related parts. The packing of this product is performed by [0]. The voltage source produces 5Vvoltage. In order for it to operate, it requires a supply voltage of 5V . There is 30MHz frequency associated with it. CD74HCT161MT FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 4 bits per element TCO OUTPUT Operating supply voltage of 5V Frequency of 30MHz CD74HCT161MT ApplicationsThere are a lot of Texas Instruments CD74HCT161MT Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS569ADWE4 OverviewA device of this type is supplied in a package of type [0]. 20 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. The device contains 1terminations. The number of all component pins is 20. As a result, it is packaged as Tube. In the circuit, there are 20pins that connect other parts. It is mounted in the way of [0]. It is a member of the family [0]. As a member of the 74ALSseries, it is ideal for a wide range of applications. A logic type of Binary Counter is adopted. 0°C~70°Cis the recommended operating temperature. Having a mounting type of [0], it is suitable for installation. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. The array contains elements containing 4bits each. It is possible for the result to be yesin Pbfree code. These electronic devices have many important features, and TCO OUTPUT; CLOCKED CARRY OUTPUTis one of them. It should be noted that there are more related parts under the 74ALS569base part number. As a result of the voltage source, there is 5V voltage. In order to operate, it requires a voltage of [0]. 30MHzis the frequency of operation. SN74ALS569ADWE4 FeaturesEmbedded in the 20-SOIC (0.295, 7.50mm Width) package 4 bits per element TCO OUTPUT; CLOCKED CARRY OUTPUT Operating supply voltage of 5.5V Frequency of 30MHz SN74ALS569ADWE4 ApplicationsThere are a lot of Texas Instruments SN74ALS569ADWE4 Counters & Dividers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC4020MT OverviewThis device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. A total of 16pins are present on all components. Packaging is based on Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. Surface Mountis the way in which it is mounted. In this case, it emerges as a member of the HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. Binary Counteris selected as the logic type. The operating temperature should be set at -55°C~125°C. A mounting type of Surface Mountis adopted. By providing the supply voltage of [0], it is capable of operating more reliably. The array has 14elements. Based on the Pbfree code, the result may be yes. There are more related parts under the 74HC4020base part number. Its packaging is provided by [0]. In this case, 2/6Vvoltage is generated by the voltage source. Supply voltage (Vsup) can be as low as 2V. It operates at a frequency of 35MHz Hz. A maximum supply voltage (Vsup) is available up to 6V. CD74HC4020MT FeaturesEmbedded in the 16-SOIC (0.154, 3.90mm Width) package 14 bits per element Frequency of 35MHz CD74HC4020MT ApplicationsThere are a lot of Texas Instruments CD74HC4020MT Counters & Dividers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.