Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Vishay Semiconductor Opto Division | 1.152Mbs (MIR) IRDA Transceiver Top View |
9567
In-stock
|
Get Quote | |||
Vishay Semiconductor Opto Division | 4Mbs (FIR) IRDA Transceiver Side View |
2292
In-stock
|
Get Quote | |||
Vishay Semiconductor Opto Division | 4Mbs (FIR) IRDA Transceiver Top View |
6709
In-stock
|
Get Quote | |||
Vishay Semiconductor Opto Division | 4Mbs (FIR) IRDA Transceiver Top View |
2581
In-stock
|
Get Quote | |||
Vishay Semiconductor Opto Division | 4Mbs (FIR) IRDA Transceiver Top View |
7854
In-stock
|
Get Quote | |||
Texas Instruments | BQ2204APN OverviewTube has packaged it with its materials. The 16-DIP (0.300, 7.62mm) is provided to conserve board space. It is a type of Nonvolatile SRAM that is of high quality and provides reliable performance. 0°C~70°C is the recommended operating temperature. 4.5V~5.5V voltage should be supplied for its normal operation. Using the Through Hole mounting technique, it is mounted. In addition to this part number, there are other electronic components that can be found based on its base part number BQ2204. Signals are prevented from reflecting off the transmission line end by means of 16 terminations. There is a voltage supply to the device of 5V. It is configured with 16 pins. There are 16 channels on this type of electronic apart. This item belongs to the Power Management Circuits subcategory. The transmission of data is ensured through the use of 1 channels. Power supplies of 5V are capable of achieving high efficiency. As an analog IC, it uses the type POWER SUPPLY SUPPORT CIRCUIT. Memory type SRAM is used for storing data. Supply voltage should be at least 4.5V higher than the minimum value. There is no damage or degradation of the characteristics of an internal circuit when it is exposed to a maximum voltage of 5.5V. There is a maximum current that may be supplied without degrading the characteristics or damaging the internal circuit as low as 6mA. BQ2204APN FeaturesAvailable in the 16-DIP (0.300, 7.62mm) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C BQ2204APN ApplicationsThere are a lot of Texas Instruments BQ2204APN Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2204ASN OverviewA package containing materials from Tube is provided. The 16-SOIC (0.154, 3.90mm Width) is provided to conserve board space. Known for its high quality and reliable performance, it is a type of Nonvolatile SRAM. The operating temperature should be set at 0°C~70°C. The voltage 4.5V~5.5V must be provided for the device to function normally. The mount is constructed using the Surface Mount technique. By using its base part number BQ2204, you can locate electronic parts that are related to this part. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. There is a voltage supply to the device of 5V. The 16 pins are configured on the board. It is based on the component with the lowest tolerance for high temperatures that we determine 260's reflow temperature limit. This is a type of electronic apart with 16 channels. Listed under the subcategory of Power Management Circuits. It is possible to transmit data using 1 channels. High efficiency can be achieved using the power supplies of 5V. IC type POWER SUPPLY SUPPORT CIRCUIT is indicated in this case. There should be a minimum voltage of supply greater than 4.5V. It is possible to supply as much voltage as 5.5V without causing damage to the internal circuit or degradation in characteristics. A maximum current of 6mA can be supplied without degrading the characteristics of the circuit or damaging it. BQ2204ASN FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C BQ2204ASN ApplicationsThere are a lot of Texas Instruments BQ2204ASN Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2205LYPWG4 OverviewThe item is packaged with the materials of Tube. The 16-TSSOP (0.173, 4.40mm Width) is provided in order to conserve board space. It is a type of Nonvolatile SRAM that is of high quality and provides reliable performance. -20°C~70°C should be set as the operating temperature. It is necessary to supply voltage to 3V~3.6V in order to ensure normal operation. Based on the technique of Surface Mount, it is mounted. The base part number BQ2205 can be used to locate other similar electronic parts. To prevent reflections off of the end of the transmission line, there are 16 terminations. Device supply voltage is 3.3V. The device has 16 pins configured. The component with the lowest tolerance for high temperatures determines the reflow temperature limit of 260. As the name implies, it is an electronic apart with a 16 channel. Power Management Circuits is the subcategory in which it is included. Data is transmitted through 1 channels. High efficiency can be achieved using the power supplies of 3.3V. An analog IC of type POWER SUPPLY SUPPORT CIRCUIT is used in this device. It is recommended that the minimum supply voltage be greater than 3V. Providing a voltage as high as 3.6V does not result in any degradation of characteristics or damage to the circuit internals. An internal circuit can be supplied with a maximum current of 0.5mA without causing any degradation of its characteristics or damage to its integrity. BQ2205LYPWG4 FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width) package Nonvolatile SRAM as controller type Operating temperature of -20°C~70°C BQ2205LYPWG4 ApplicationsThere are a lot of Texas Instruments BQ2205LYPWG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DP8421AVX-25 OverviewThe product is packaged with materials from Tape & Reel (TR). For the purpose of saving board space, it is provided in the 68-LCC (J-Lead). Dynamic RAM (DRAM) type with high quality and reliability. A temperature of 0°C~70°C should be set for the operating environment. It is necessary to supply voltage to 4.5V~5.5V in order to ensure normal operation. It is mounted based on the technique of Surface Mount. More related electronic parts can be found according its base part number DP8421. It is common to use 68 terminations to prevent signals from reflecting off the end of the transmission line. There is a voltage supply to the device of 5V. As a result of the component with the lowest tolerance for high temperatures, the reflow temperature limit of NOT SPECIFIED has been established. This item falls under the Memory Controllers subcategory. High efficiency can be achieved by using the power supplies of 5V. An uPs/uCs/peripheral IC type is integrated with the MEMORY CONTROLLER, DRAM. No more than 95mA amps should be drawn from the supply. DP8421AVX-25 FeaturesAvailable in the 68-LCC (J-Lead) package Dynamic RAM (DRAM) as controller type Operating temperature of 0°C~70°C DP8421AVX-25 ApplicationsThere are a lot of Texas Instruments DP8421AVX-25 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DP8421AV-25 OverviewThere is a packaging of Tube materials included in the package. For the purpose of saving board space, it is provided in the 68-LCC (J-Lead). Having high quality and reliable performance, the Dynamic RAM (DRAM) is a type of product. 0°C~70°C should be the operating temperature. It requires a voltage of 4.5V~5.5V in order to operate normally. It is mounted based on the technique of Surface Mount. The base part number DP8421 can be used to locate other similar electronic parts. As a result, it is configured with 68 pins. There are no internal components within the uPs/uCs/peripheral IC, so it is integrated with MEMORY CONTROLLER, DRAM. DP8421AV-25 FeaturesAvailable in the 68-LCC (J-Lead) package Dynamic RAM (DRAM) as controller type Operating temperature of 0°C~70°C DP8421AV-25 ApplicationsThere are a lot of Texas Instruments DP8421AV-25 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2204ASNTR OverviewThe item is packaged with the materials of Tape & Reel (TR). As a result, it is provided in the 16-SOIC (0.154, 3.90mm Width) to save space. In this case, it is an extremely reliable and high quality type of Nonvolatile SRAM. Set the operating temperature to 0°C~70°C. It is essential that 4.5V~5.5V voltage be supplied in order for it to function properly. Using the Surface Mount mounting technique, it is mounted. In addition to this part number, more related electronic parts are available according to its base part number BQ2204. In order to prevent signals from reflecting off the end of the transmission line, 16 terminations are used. 5V is the supply voltage of the device. There are two 16 pins on this device. The component with the lowest tolerance for high temperatures determines the reflow temperature limit of 260. An electronic apart with 16 channels. As a subcategory of Power Management Circuits, it is included in this category. In order to ensure the transmission of data, there are 1 channels. Using the power supplies of 5V, high efficiency can be achieved. It uses POWER SUPPLY SUPPORT CIRCUIT as its analog IC type. Ensure that the supply voltage is greater than 4.5V at all times. It is possible to supply as much voltage as 5.5V without causing damage to the internal circuit or degradation in characteristics. The circuit can handle a maximum current of 6mA without degrading its characteristics or causing damage. BQ2204ASNTR FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C BQ2204ASNTR ApplicationsThere are a lot of Texas Instruments BQ2204ASNTR Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2201SN-NTR OverviewMaterials from Tape & Reel (TR) are included in the packaging. The 8-SOIC (0.154, 3.90mm Width) is provided to conserve board space. There are several types of Nonvolatile SRAM and it is a high-quality and reliable type. The operating temperature should be set at -40°C~85°C. 4.5V~5.5V voltage should be supplied for its normal operation. The mounting technique is based on the Surface Mount method. In addition to this part number, more related electronic parts are available according to its base part number BQ2201. Signals are prevented from reflecting off the transmission line end by means of 8 terminations. 5V is the device's supply voltage. There are four 8 pins on the board. Reflow temperature limit 260 is determined by the component with the lowest temperature tolerance. Listed under the subcategory of Power Management Circuits. Data transmission is ensured through 1 channels. High efficiency can be achieved when the power supplies of 5V is provided. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. Voltage must be higher than 4.5V as the minimum value of supply voltage. Providing a voltage as high as 5.5V does not result in any degradation of characteristics or damage to the circuit internals. The maximum current that can be applied without degrading the characteristics or causing damage to the internal circuitry is 5mA. BQ2201SN-NTR FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of -40°C~85°C BQ2201SN-NTR ApplicationsThere are a lot of Texas Instruments BQ2201SN-NTR Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2201PNG4 OverviewIt is packaged with the materials of Tube. It is provided in the 8-DIP (0.300, 7.62mm) to save board space. Nonvolatile SRAM type with high quality and reliability. 0°C~70°C should be set as the operating temperature. It is necessary to supply voltage to 4.5V~5.5V in order to ensure normal operation. It is mounted according to the Through Hole technique. Based on the base part number BQ2201, more related electronic components can be found. BQ2201PNG4 FeaturesAvailable in the 8-DIP (0.300, 7.62mm) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C BQ2201PNG4 ApplicationsThere are a lot of Texas Instruments BQ2201PNG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments |
10947
In-stock
|
Get Quote | ||||
Texas Instruments | BQ2204ASN-NTRG4 OverviewTape & Reel (TR) has packaged it with its materials. The 16-SOIC (0.154, 3.90mm Width) is provided to conserve board space. This is a high quality and reliable type of Nonvolatile SRAM. -40°C~85°C should be set as the operating temperature. It is necessary to provide voltage to 4.5V~5.5V for the device to operate normally. The mounting technique used is Surface Mount. By using its base part number BQ2204, you can locate electronic parts that are related to this part. In order to prevent signals from reflecting back from the transmission line's end, 16 terminations are used. 5V is the device's supply voltage. A 16 pin is configured on the board. Depending on the component with the lowest tolerance for high temperatures, NOT SPECIFIED will determine the reflow temperature limit. As a subcategory of Power Management Circuits, it is included in this category. There are 1 channels designed to ensure the transmission of data. High efficiency can be achieved when the power supplies of 5V is provided. As you can see, the analog IC type is POWER SUPPLY SUPPORT CIRCUIT. There should be a minimum voltage of supply greater than 4.5V. It is possible to supply as much voltage as 5.5V to the circuit without causing degradation in its characteristics or damage to its internal components. An internal circuit can be supplied with a maximum current of 6mA without causing any degradation of its characteristics or damage to its integrity. BQ2204ASN-NTRG4 FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of -40°C~85°C BQ2204ASN-NTRG4 ApplicationsThere are a lot of Texas Instruments BQ2204ASN-NTRG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | BQ2201SNG4 OverviewMaterials from Tube are used in its packaging. In order to save board space, it is provided in the 8-SOIC (0.154, 3.90mm Width). There are several types of Nonvolatile SRAM and it is a high-quality and reliable type. 0°C~70°C is the recommended operating temperature. It is essential that 4.5V~5.5V voltage be supplied in order for it to function properly. The mount is constructed using the Surface Mount technique. More related electronic parts can be found according its base part number BQ2201. A 8 termination is used to prevent signals from reflecting off the transmission line's end. Approximately 5V volts are supplied to the device. The pins are configured as 8. Depending on the component with the lowest tolerance for high temperatures, 260 will determine the reflow temperature limit. As the name implies, it is an electronic apart with a 8 channel. This item belongs to the Power Management Circuits subcategory. It is possible to transmit data using 1 channels. High efficiency can be achieved when the power supplies of 5V is provided. A POWER SUPPLY SUPPORT CIRCUIT analog IC is used in this case. Information can be stored in SRAM memory. The maximum current that can be supplied without degrading the characteristics of the internal circuit is 5mA. As a result of the device drawing current from its supply, 3mA receives its current. Devices draw voltage from their power supplies to generate 5V. BQ2201SNG4 FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C Operating supply current of 3mA Operating supply voltage of 5V BQ2201SNG4 ApplicationsThere are a lot of Texas Instruments BQ2201SNG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DP8421ATVX-25 OverviewMaterials from Tape & Reel (TR) are included in the packaging. In order to save board space, it is provided in the 68-LCC (J-Lead). Dynamic RAM (DRAM) type with high quality and reliability. Setting the operating temperature to 0°C~70°C is recommended. It is necessary to supply voltage to 4.5V~5.5V in order to ensure normal operation. The mounting technique used is Surface Mount. By using its base part number DP8421, you can locate electronic parts that are related to this part. A 68 termination is used to prevent signals from reflecting off the transmission line's end. Approximately 5V volts are supplied to the device. As a result of the component with the lowest tolerance for high temperatures, the reflow temperature limit of NOT SPECIFIED has been established. Listed under the subcategory of Memory Controllers. High efficiency can be achieved when the power supplies of 5V is provided. There is an integration of uPs/uCs/peripheral IC in the MEMORY CONTROLLER, DRAM. There should be no excess in supply current over 95mA. DP8421ATVX-25 FeaturesAvailable in the 68-LCC (J-Lead) package Dynamic RAM (DRAM) as controller type Operating temperature of 0°C~70°C DP8421ATVX-25 ApplicationsThere are a lot of Texas Instruments DP8421ATVX-25 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2204ASN OverviewA package containing materials from Tube is provided. The 16-SOIC (0.154, 3.90mm Width) is provided to conserve board space. Known for its high quality and reliable performance, it is a type of Nonvolatile SRAM. The operating temperature should be set at 0°C~70°C. The voltage 4.5V~5.5V must be provided for the device to function normally. The mount is constructed using the Surface Mount technique. By using its base part number BQ2204, you can locate electronic parts that are related to this part. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. There is a voltage supply to the device of 5V. The 16 pins are configured on the board. It is based on the component with the lowest tolerance for high temperatures that we determine 260's reflow temperature limit. This is a type of electronic apart with 16 channels. Listed under the subcategory of Power Management Circuits. It is possible to transmit data using 1 channels. High efficiency can be achieved using the power supplies of 5V. IC type POWER SUPPLY SUPPORT CIRCUIT is indicated in this case. There should be a minimum voltage of supply greater than 4.5V. It is possible to supply as much voltage as 5.5V without causing damage to the internal circuit or degradation in characteristics. A maximum current of 6mA can be supplied without degrading the characteristics of the circuit or damaging it. BQ2204ASN FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C BQ2204ASN ApplicationsThere are a lot of Texas Instruments BQ2204ASN Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2205LYPW OverviewThe product is packaged with materials from Tube. The 16-TSSOP (0.173, 4.40mm Width) is provided to conserve board space. Having high quality and reliable performance, the Nonvolatile SRAM is a type of product. The operating temperature should be set at -20°C~70°C. 3V~3.6V voltage should be supplied for its normal operation. It is mounted based on the technique of Surface Mount. In addition to this part number, more related electronic parts are available according to its base part number BQ2205. 16 terminations prevent signals from reflecting off the transmission line's end. 3.3V is the device's supply voltage. The 16 pins are configured on the board. Reflow temperature limit 260 is determined by the component with the lowest temperature tolerance. It is a kind of electronic apart with 16 channels. This item falls under the Power Management Circuits subcategory. It is possible to transmit data using 1 channels. When 3.3V power supplies are provided, high efficiency can be achieved. As an analog IC, it uses the type POWER SUPPLY SUPPORT CIRCUIT. An informational memory type is SRAM. A minimum supply voltage of 3V should be maintained. There is no damage or degradation of the characteristics of an internal circuit when it is exposed to a maximum voltage of 3.6V. The maximum current that can be applied without degrading the characteristics or causing damage to the internal circuitry is 0.5mA. BQ2205LYPW FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width) package Nonvolatile SRAM as controller type Operating temperature of -20°C~70°C BQ2205LYPW ApplicationsThere are a lot of Texas Instruments BQ2205LYPW Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2205LYPWRG4 OverviewThere is a packaging of Tape & Reel (TR) materials included in the package. For the purpose of saving board space, it is provided in the 16-TSSOP (0.173, 4.40mm Width). It is a type of Nonvolatile SRAM that is of high quality and provides reliable performance. Setting -20°C~70°C as the operating temperature is recommended. It is necessary to supply voltage to 3V~3.6V in order to ensure normal operation. It is mounted according to the Surface Mount technique. In addition, it is possible to find more related electronic parts by using its base part number BQ2205. There are 16 terminations used to prevent signals from reflecting off the end of the transmission line. This device is supplied with voltage 3.3V. Pins 16 are configured on this board. It is based on the component with the lowest tolerance for high temperatures that we determine 260's reflow temperature limit. An electronic apart with 16 channels is involved in this process. Power Management Circuits is the subcategory in which it is included. In order to ensure data transmission, there are 1 channels. High efficiency can be achieved by using the power supplies of 3.3V. As you can see, the analog IC type is POWER SUPPLY SUPPORT CIRCUIT. The minimum value of supply voltage should be higher than 3V. It is possible to supply as much voltage as 3.6V without causing damage to the internal circuit or degradation in characteristics. It is possible to supply a current of 0.5mA maximum without causing characteristics degradation or damage to the internal circuit. BQ2205LYPWRG4 FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width) package Nonvolatile SRAM as controller type Operating temperature of -20°C~70°C BQ2205LYPWRG4 ApplicationsThere are a lot of Texas Instruments BQ2205LYPWRG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DP8421AVX-25 OverviewThe product is packaged with materials from Tape & Reel (TR). For the purpose of saving board space, it is provided in the 68-LCC (J-Lead). Dynamic RAM (DRAM) type with high quality and reliability. A temperature of 0°C~70°C should be set for the operating environment. It is necessary to supply voltage to 4.5V~5.5V in order to ensure normal operation. It is mounted based on the technique of Surface Mount. More related electronic parts can be found according its base part number DP8421. It is common to use 68 terminations to prevent signals from reflecting off the end of the transmission line. There is a voltage supply to the device of 5V. As a result of the component with the lowest tolerance for high temperatures, the reflow temperature limit of NOT SPECIFIED has been established. This item falls under the Memory Controllers subcategory. High efficiency can be achieved by using the power supplies of 5V. An uPs/uCs/peripheral IC type is integrated with the MEMORY CONTROLLER, DRAM. No more than 95mA amps should be drawn from the supply. DP8421AVX-25 FeaturesAvailable in the 68-LCC (J-Lead) package Dynamic RAM (DRAM) as controller type Operating temperature of 0°C~70°C DP8421AVX-25 ApplicationsThere are a lot of Texas Instruments DP8421AVX-25 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2201SN OverviewA package containing materials from Tube is provided. It is provided in the 8-SOIC (0.154, 3.90mm Width) to save board space. Having high quality and reliable performance, the Nonvolatile SRAM is a type of product. The operating temperature should be set at 0°C~70°C. The voltage required for its normal operation should be provided by 4.5V~5.5V. It is mounted based on the technique of Surface Mount. More related electronic parts can be found according its base part number BQ2201. In order to prevent signals from reflecting back from the transmission line's end, 8 terminations are used. It operates with the supply voltage of 5V. It is configured with 8 pins. The reflow temperaure limit of 260 is determined by the component with the lowest tolerance for high temperatures. An electronic apart with 8 channels. This item falls within the subcategory of Power Management Circuits. In order to ensure the transmission of data, there are 1 channels. Power supplies of 5V are capable of achieving high efficiency. There is a memory type called SRAM that is used to store information. Currents as low as 5mA can be supplied without affecting the characteristics or damaging the internal circuitry. 3mA is derived from the supply of the device by the device. The device draws the voltage of 5V from its supply. BQ2201SN FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of 0°C~70°C Operating supply current of 3mA Operating supply voltage of 5V BQ2201SN ApplicationsThere are a lot of Texas Instruments BQ2201SN Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Micropower Battery Company | XCCACE-TQ144I OverviewIt is packaged with the materials of Tray. In order to conserve space on the board, it is located in the 144-LQFP. This is a high quality and reliable type of CompactFlash. -40°C~85°C should be set as the operating temperature. It is necessary to provide voltage to 2.25V~3.6V for the device to operate normally. The mount is constructed using the Surface Mount technique. The base part number XCCACE can be used to locate other similar electronic parts. The transmission line ends are terminated with 144 terminations in order to prevent signals from reflecting off the end. There is a supply voltage of 2.5V for the device. There are two 144 pins on this device. The reflow temperaure limit of 225 is determined by the component with the lowest tolerance for high temperatures. Subcategory Memory Controllers includes it. By providing a power supply of 2.5/3.33.3V, a high level of efficiency can be achieved. An uPs/uCs/peripheral IC type is integrated with the SECONDARY STORAGE CONTROLLER, FLASH MEMORY DRIVE. Ideally, the maximum supply current should not exceed 0.42mA. XCCACE-TQ144I FeaturesAvailable in the 144-LQFP package CompactFlash as controller type Operating temperature of -40°C~85°C XCCACE-TQ144I ApplicationsThere are a lot of Xilinx Inc. XCCACE-TQ144I Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2204ASN-NTR OverviewThe item is packaged with the materials of Tape & Reel (TR). The 16-SOIC (0.154, 3.90mm Width) is provided in order to conserve board space. There are several types of Nonvolatile SRAM and it is a high-quality and reliable type. -40°C~85°C is the recommended operating temperature. It is necessary to provide voltage to 4.5V~5.5V for the device to operate normally. The mount is constructed using the Surface Mount technique. There are more related electronic parts based on the part number BQ2204. Signals are prevented from reflecting off the transmission line end by means of 16 terminations. There is a voltage supply to the device of 5V. The pin configuration is 16. The reflow temperaure limit of NOT SPECIFIED is determined by the component with the lowest tolerance for high temperatures. There are 16 channels in this type of electronic apart. There is a subcategory of Power Management Circuits for this item. It is possible to transmit data using 1 channels. The power supplies of 5V provide high efficiency. An analog IC of this type is designated as POWER SUPPLY SUPPORT CIRCUIT. Ideally, the supply voltage should be higher than 4.5V. It is possible to supply as much voltage as 5.5V to the circuit without causing degradation in its characteristics or damage to its internal components. Currents as low as 6mA can be supplied without affecting the characteristics or damaging the internal circuitry. BQ2204ASN-NTR FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of -40°C~85°C BQ2204ASN-NTR ApplicationsThere are a lot of Texas Instruments BQ2204ASN-NTR Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | BQ2204ASN-NTRG4 OverviewTape & Reel (TR) has packaged it with its materials. The 16-SOIC (0.154, 3.90mm Width) is provided to conserve board space. This is a high quality and reliable type of Nonvolatile SRAM. -40°C~85°C should be set as the operating temperature. It is necessary to provide voltage to 4.5V~5.5V for the device to operate normally. The mounting technique used is Surface Mount. By using its base part number BQ2204, you can locate electronic parts that are related to this part. In order to prevent signals from reflecting back from the transmission line's end, 16 terminations are used. 5V is the device's supply voltage. A 16 pin is configured on the board. Depending on the component with the lowest tolerance for high temperatures, NOT SPECIFIED will determine the reflow temperature limit. As a subcategory of Power Management Circuits, it is included in this category. There are 1 channels designed to ensure the transmission of data. High efficiency can be achieved when the power supplies of 5V is provided. As you can see, the analog IC type is POWER SUPPLY SUPPORT CIRCUIT. There should be a minimum voltage of supply greater than 4.5V. It is possible to supply as much voltage as 5.5V to the circuit without causing degradation in its characteristics or damage to its internal components. An internal circuit can be supplied with a maximum current of 6mA without causing any degradation of its characteristics or damage to its integrity. BQ2204ASN-NTRG4 FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width) package Nonvolatile SRAM as controller type Operating temperature of -40°C~85°C BQ2204ASN-NTRG4 ApplicationsThere are a lot of Texas Instruments BQ2204ASN-NTRG4 Memory Controllers applications.
|
999
In-stock
|
Get Quote | |||
Lite-On Inc. | 115.2kbps IRDA Transceiver Side View |
7787
In-stock
|
Get Quote | |||
Rohm Semiconductor | 115.2kbs (SIR) IRDA Transceiver |
2343
In-stock
|
Get Quote | |||
Rohm Semiconductor | 115.2kbs (SIR) IRDA Transceiver |
7637
In-stock
|
Get Quote | |||
Rohm Semiconductor | 115.2kbs (SIR) IRDA Transceiver Side View |
9333
In-stock
|
Get Quote | |||
Vishay Semiconductor Opto Division | 115.2kbps (SIR) IRDA Transceiver Side View |
6411
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.