Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | SN74LS125AN OverviewLogical driver uses a neat 14-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LS series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the LS family, the electric component belongs. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LS125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 11mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 channels for high quality communication. Wireless transceiver is able to output 4 lines. Does the electronic component support schmitt trigger input? No. The typical output current of the logical driver is measured 24mA. SN74LS125AN FeaturesBus Driver/Transceivers SN74LS125AN ApplicationsThere are a lot of Texas Instruments SN74LS125AN Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC2G34MDCKREP OverviewLogical driver uses a neat 6-TSSOP, SC-88, SOT-363 package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~5.5V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with Push-Pull output (s). Digital buffer is one of the 74LVC series devices. 6 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. Electronic parts from the LVC/LCX/Z family are used in this part. 6 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 6 pins. The bus transceiver employs 1 bits for each element. You can search "74LVC2G34" for other related electrical components. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 10μA. It is recommended to use a 3.3V power supply. It is generally sold in TR package. 2 channels for high quality communication. It is sufficient to make 2 outputs. SN74LVC2G34MDCKREP FeaturesGates SN74LVC2G34MDCKREP ApplicationsThere are a lot of Texas Instruments SN74LVC2G34MDCKREP Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVT125D OverviewLogical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LVT series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Family LVT includes the buffer IC . 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LVT125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 7mA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. To supply the device, a minimum voltage of 2.7V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 3 lines. Does the electronic component support schmitt trigger input? No. The typical output current of the logical driver is measured 64mA. SN74LVT125D FeaturesBus Driver/Transceivers SN74LVT125D ApplicationsThere are a lot of Texas Instruments SN74LVT125D Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74ALS245AN OverviewLogical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 15mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ALS series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the ALS family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74ALS245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 36mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. SN74ALS245AN FeaturesBus Driver/Transceivers SN74ALS245AN ApplicationsThere are a lot of Texas Instruments SN74ALS245AN Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS541N OverviewLogical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 15mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LS series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the LS family. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LS541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 30mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 8 lines. SN74LS541N FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74LS541N ApplicationsThere are a lot of Texas Instruments SN74LS541N Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
Ultralife | SN74AHCT240PWR OverviewLogical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74AHCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the AHCT/VHCT/VT family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74AHCT240" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. SN74AHCT240PWR FeaturesBus Driver/Transceiver SN74AHCT240PWR ApplicationsThere are a lot of Texas Instruments SN74AHCT240PWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC07ADBR OverviewLogical driver uses a neat 14-SSOP (0.209, 5.30mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is - 24mA. Logical driver can deal with Open Drain output (s). Digital buffer is one of the 74LVC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. Family LVC/LCX/Z includes the buffer IC . 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. You can search "74LVC07" for other related electrical components. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 10μA. It is recommended to use a 3.3V power supply. It is generally sold in TR package. 10 bits are included within the electrical component. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals. SN74LVC07ADBR FeaturesGates SN74LVC07ADBR ApplicationsThere are a lot of Texas Instruments SN74LVC07ADBR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC541APWRG4 OverviewLogical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This electronic component belongs to the LVC/LCX/Z family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74LVC541APWRG4 FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74LVC541APWRG4 ApplicationsThere are a lot of Texas Instruments SN74LVC541APWRG4 Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVCH245ADGVR OverviewLogical driver uses a neat 20-TFSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVCH series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. LVC/LCX/Z family part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVCH245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 3.3V power supply. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. SN74LVCH245ADGVR FeaturesBus Driver/Transceivers WITH DIRECTION CONTROL SN74LVCH245ADGVR ApplicationsThere are a lot of Texas Instruments SN74LVCH245ADGVR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVCH244ADBR OverviewLogical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVCH series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. This electronic part belongs to the LVC/LCX/Z family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74LVCH244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. To supply the device, a minimum voltage of 1.65V is a must. Wireless transceiver is able to output 3 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. SN74LVCH244ADBR FeaturesBus Driver/Transceivers SN74LVCH244ADBR ApplicationsThere are a lot of Texas Instruments SN74LVCH244ADBR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
1777
In-stock
|
Get Quote | ||||
Ultralife | SN74HCT245DBR OverviewLogical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 6mA 6mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the HCT family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74HCT245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. SN74HCT245DBR FeaturesBus Driver/Transceivers WITH DIRECTION CONTROL SN74HCT245DBR ApplicationsThere are a lot of Texas Instruments SN74HCT245DBR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
Ultralife | CD4050BDR OverviewLogical driver uses a neat 16-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 3V~18V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 8mA 48mA. Logical driver can deal with Push-Pull output (s). Digital buffer is one of the 4000B series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 10V. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. The bus transceiver employs 1 bits for each element. You can search "CD4050" for other related electrical components. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 20μA. It is generally sold in TR package. To supply the device, a minimum voltage of 5V is a must. 6 channels for high quality communication. It is sufficient to make 6 outputs. CD4050BDR FeaturesGates CD4050BDR ApplicationsThere are a lot of Texas Instruments CD4050BDR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC245ADGVR OverviewLogical driver uses a neat 20-TFSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. Transceiver shares the LVC/LCX/Z family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 3.3V power supply. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. SN74LVC245ADGVR FeaturesBus Driver/Transceivers WITH DIRECTION CONTROL SN74LVC245ADGVR ApplicationsThere are a lot of Texas Instruments SN74LVC245ADGVR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVCH244APWR OverviewLogical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVCH series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. There is a LVC/LCX/Z family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74LVCH244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. To supply the device, a minimum voltage of 1.65V is a must. Wireless transceiver is able to output 3 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. SN74LVCH244APWR FeaturesBus Driver/Transceivers SN74LVCH244APWR ApplicationsThere are a lot of Texas Instruments SN74LVCH244APWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74AUP2G34DCKR OverviewLogical driver uses a neat 6-TSSOP, SC-88, SOT-363 package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 0.8V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 4mA 4mA. Logical driver can deal with Push-Pull output (s). Digital buffer is one of the 74AUP series devices. 6 terminations with different functions. Buffer IC reuqires a supply voltage of 1.2V. This electronic part belongs to the AUP/ULP/V family of parts. 6 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 6 pins. The bus transceiver employs 1 bits for each element. You can search "74AUP2G34" for other related electrical components. Specifically, digital transciever is a kind of Gates. In quiescent state, the electronic part uses 500nA. It is generally sold in TR package. To supply the device, a minimum voltage of 0.8V is a must. 2 channels for high quality communication. SN74AUP2G34DCKR FeaturesGates SN74AUP2G34DCKR ApplicationsThere are a lot of Texas Instruments SN74AUP2G34DCKR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC541ADGVR OverviewLogical driver uses a neat 20-TFSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Transceiver shares the LVC/LCX/Z family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74LVC541ADGVR FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74LVC541ADGVR ApplicationsThere are a lot of Texas Instruments SN74LVC541ADGVR Buffers & Transceivers applications.
|
9088
In-stock
|
Get Quote | |||
Ultralife | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC540APWR OverviewLogical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. The bus transceiver employs 8 bits for each element. You can search "74LVC540" for other related electrical components. In quiescent state, the electronic part uses 10μA. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 1.65V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 3 lines. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be 20-TSSOP. It is sufficient to make 8 outputs. Digital buffer is characterized to have 8 inputs. The fundamental operation of logical driver is based on 1 circuits. SN74LVC540APWR FeaturesHigh Level Output: 24mA Low Level Output: -24mA SN74LVC540APWR ApplicationsThere are a lot of Texas Instruments SN74LVC540APWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74AHCT125QPWRQ1 OverviewLogical driver uses a neat 14-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the Automotive, AEC-Q100, 74AHCT series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the AHCT/VHCT/VT family. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74AHCT125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 2μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 channels for high quality communication. Wireless transceiver is able to output 4 lines. SN74AHCT125QPWRQ1 FeaturesBus Driver/Transceivers SN74AHCT125QPWRQ1 ApplicationsThere are a lot of Texas Instruments SN74AHCT125QPWRQ1 Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74ACT244PWR OverviewLogical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the ACT family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74ACT244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. It is sufficient to make 8 outputs. The fundamental operation of logical driver is based on 8 circuits. SN74ACT244PWR FeaturesBus Driver/Transceivers SN74ACT244PWR ApplicationsThere are a lot of Texas Instruments SN74ACT244PWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
24848
In-stock
|
Get Quote | ||||
Ultralife | SN74ALVC125PWR OverviewLogical driver uses a neat 14-TSSOP (0.173, 4.40mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74ALVC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 1.8V. This electronic part belongs to the ALVC/VCX/A family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74ALVC125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 4 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74ALVC125PWR FeaturesBus Driver/Transceivers SN74ALVC125PWR ApplicationsThere are a lot of Texas Instruments SN74ALVC125PWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC541ARGYR OverviewLogical driver uses a neat 20-VFQFN Exposed Pad package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This buffer driver is part of the LVC/LCX/Z family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74LVC541ARGYR FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74LVC541ARGYR ApplicationsThere are a lot of Texas Instruments SN74LVC541ARGYR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | <h3>SN74LVC541ADBR Overview</h3><div><br/>Logical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Family LVC/LCX/Z includes the buffer IC . 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines. <br/><br/></div><h3>SN74LVC541ADBR Features</h3><div><br/>Bus Driver/Transceivers<br/>WITH DUAL OUTPUT ENABLE<br/><br/></div><h3>SN74LVC541ADBR Applications</h3><div><br/>There are a lot of Texas Instruments SN74LVC541ADBR Buffers & Transceivers applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Wireless access points<!--<li--></li><li>Carrier phase observations<!--<li--></li><li>Digital systems<!--<li--></li><li>Precision geodetic measurement<!--<li--></li><li>Fast Ethernet<!--<li--></li><li>Solenoids <!--<li--></li><li>Switching system<!--<li--></li><li>Home theater wiring-free<!--<li--></li><li>Point-to-point networking<!--<li--></li><li>Switches/bridges/routers/servers<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC541ANSR OverviewLogical driver uses a neat 20-SOIC (0.209, 5.30mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.65V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Electronic parts from the LVC/LCX/Z family are used in this part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is generally sold in TR package. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74LVC541ANSR FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74LVC541ANSR ApplicationsThere are a lot of Texas Instruments SN74LVC541ANSR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HCT540DWR OverviewLogical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 6mA 6mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic component belongs to the HCT family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74HCT540" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. It is sufficient to make 8 outputs. SN74HCT540DWR FeaturesBus Driver/Transceivers WITH DUAL OUTPUT ENABLE SN74HCT540DWR ApplicationsThere are a lot of Texas Instruments SN74HCT540DWR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVTH125DR OverviewLogical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LVTH series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This buffer driver is part of the LVT family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LVTH125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4.5mA. It is generally sold in TR package. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. To supply the device, a minimum voltage of 2.7V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 3 lines. SN74LVTH125DR FeaturesBus Driver/Transceivers SN74LVTH125DR ApplicationsThere are a lot of Texas Instruments SN74LVTH125DR Buffers & Transceivers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.